@@ -219,4 +219,6 @@ source "drivers/siox/Kconfig"
source "drivers/slimbus/Kconfig"
+source "drivers/peci/Kconfig"
+
endmenu
@@ -185,3 +185,4 @@ obj-$(CONFIG_TEE) += tee/
obj-$(CONFIG_MULTIPLEXER) += mux/
obj-$(CONFIG_UNISYS_VISORBUS) += visorbus/
obj-$(CONFIG_SIOX) += siox/
+obj-$(CONFIG_PECI) += peci/
new file mode 100644
@@ -0,0 +1,20 @@
+#
+# Platform Environment Control Interface (PECI) subsystem configuration
+#
+
+menu "PECI support"
+
+config PECI
+ tristate "PECI support"
+ select RT_MUTEXES
+ select CRC8
+ help
+ The Platform Environment Control Interface (PECI) is a one-wire bus
+ interface that provides a communication channel between Intel
+ processor and chipset components to external monitoring or control
+ devices.
+
+ This PECI support can also be built as a module. If so, the module
+ will be called peci-core.
+
+endmenu
new file mode 100644
@@ -0,0 +1,6 @@
+#
+# Makefile for the PECI core and bus drivers.
+#
+
+# Core functionality
+obj-$(CONFIG_PECI) += peci-core.o
new file mode 100644
@@ -0,0 +1,1337 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Intel Corporation
+
+#include <linux/crc8.h>
+#include <linux/fs.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/peci.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+/* Device Specific Completion Code (CC) Definition */
+#define DEV_PECI_CC_RETRY_ERR_MASK 0xf0
+#define DEV_PECI_CC_SUCCESS 0x40
+#define DEV_PECI_CC_TIMEOUT 0x80
+#define DEV_PECI_CC_OUT_OF_RESOURCE 0x81
+#define DEV_PECI_CC_INVALID_REQ 0x90
+
+/* Skylake EDS says to retry for 250ms */
+#define DEV_PECI_RETRY_TIME_MS 250
+#define DEV_PECI_RETRY_BIT 0x01
+
+#define GET_TEMP_WR_LEN 1
+#define GET_TEMP_RD_LEN 2
+#define GET_TEMP_PECI_CMD 0x01
+
+#define GET_DIB_WR_LEN 1
+#define GET_DIB_RD_LEN 8
+#define GET_DIB_PECI_CMD 0xf7
+
+#define RDPKGCFG_WRITE_LEN 5
+#define RDPKGCFG_READ_LEN_BASE 1
+#define RDPKGCFG_PECI_CMD 0xa1
+
+#define WRPKGCFG_WRITE_LEN_BASE 6
+#define WRPKGCFG_READ_LEN 1
+#define WRPKGCFG_PECI_CMD 0xa5
+
+#define RDIAMSR_WRITE_LEN 5
+#define RDIAMSR_READ_LEN 9
+#define RDIAMSR_PECI_CMD 0xb1
+
+#define WRIAMSR_PECI_CMD 0xb5
+
+#define RDPCICFG_WRITE_LEN 6
+#define RDPCICFG_READ_LEN 5
+#define RDPCICFG_PECI_CMD 0x61
+
+#define WRPCICFG_PECI_CMD 0x65
+
+#define RDPCICFGLOCAL_WRITE_LEN 5
+#define RDPCICFGLOCAL_READ_LEN_BASE 1
+#define RDPCICFGLOCAL_PECI_CMD 0xe1
+
+#define WRPCICFGLOCAL_WRITE_LEN_BASE 6
+#define WRPCICFGLOCAL_READ_LEN 1
+#define WRPCICFGLOCAL_PECI_CMD 0xe5
+
+/* CRC8 table for Assure Write Frame Check */
+#define PECI_CRC8_POLYNOMIAL 0x07
+DECLARE_CRC8_TABLE(peci_crc8_table);
+
+static struct device_type peci_adapter_type;
+static struct device_type peci_client_type;
+
+#define PECI_CDEV_MAX 16
+static dev_t peci_devt;
+static bool is_registered;
+
+static DEFINE_MUTEX(core_lock);
+static DEFINE_IDR(peci_adapter_idr);
+
+static ssize_t name_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%s\n", dev->type == &peci_client_type ?
+ to_peci_client(dev)->name : to_peci_adapter(dev)->name);
+}
+static DEVICE_ATTR_RO(name);
+
+static void peci_client_dev_release(struct device *dev)
+{
+ kfree(to_peci_client(dev));
+}
+
+static struct attribute *peci_device_attrs[] = {
+ &dev_attr_name.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(peci_device);
+
+static struct device_type peci_client_type = {
+ .groups = peci_device_groups,
+ .release = peci_client_dev_release,
+};
+
+static struct peci_client *peci_verify_client(struct device *dev)
+{
+ return (dev->type == &peci_client_type)
+ ? to_peci_client(dev)
+ : NULL;
+}
+
+static void peci_adapter_dev_release(struct device *dev)
+{
+ /* do nothing */
+}
+
+static struct attribute *peci_adapter_attrs[] = {
+ &dev_attr_name.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(peci_adapter);
+
+static struct device_type peci_adapter_type = {
+ .groups = peci_adapter_groups,
+ .release = peci_adapter_dev_release,
+};
+
+static struct peci_adapter *peci_verify_adapter(struct device *dev)
+{
+ return (dev->type == &peci_adapter_type)
+ ? to_peci_adapter(dev)
+ : NULL;
+}
+
+static struct peci_adapter *peci_get_adapter(int nr)
+{
+ struct peci_adapter *adapter;
+
+ mutex_lock(&core_lock);
+ adapter = idr_find(&peci_adapter_idr, nr);
+ if (!adapter)
+ goto out_unlock;
+
+ if (try_module_get(adapter->owner))
+ get_device(&adapter->dev);
+ else
+ adapter = NULL;
+
+out_unlock:
+ mutex_unlock(&core_lock);
+ return adapter;
+}
+
+static void peci_put_adapter(struct peci_adapter *adapter)
+{
+ if (!adapter)
+ return;
+
+ put_device(&adapter->dev);
+ module_put(adapter->owner);
+}
+
+static u8 peci_aw_fcs(u8 *data, int len)
+{
+ return crc8(peci_crc8_table, data, (size_t)len, 0);
+}
+
+static int peci_locked_xfer(struct peci_adapter *adapter,
+ struct peci_xfer_msg *msg,
+ bool do_retry,
+ bool has_aw_fcs)
+{
+ ktime_t start, end;
+ s64 elapsed_ms;
+ int rc = 0;
+
+ if (!adapter->xfer) {
+ dev_dbg(&adapter->dev, "PECI level transfers not supported\n");
+ return -ENODEV;
+ }
+
+ if (in_atomic() || irqs_disabled()) {
+ rt_mutex_trylock(&adapter->bus_lock);
+ if (!rc)
+ return -EAGAIN; /* PECI activity is ongoing */
+ } else {
+ rt_mutex_lock(&adapter->bus_lock);
+ }
+
+ if (do_retry)
+ start = ktime_get();
+
+ do {
+ rc = adapter->xfer(adapter, msg);
+
+ if (!do_retry)
+ break;
+
+ /* Per the PECI spec, need to retry commands that return 0x8x */
+ if (!(!rc && ((msg->rx_buf[0] & DEV_PECI_CC_RETRY_ERR_MASK) ==
+ DEV_PECI_CC_TIMEOUT)))
+ break;
+
+ /* Set the retry bit to indicate a retry attempt */
+ msg->tx_buf[1] |= DEV_PECI_RETRY_BIT;
+
+ /* Recalculate the AW FCS if it has one */
+ if (has_aw_fcs)
+ msg->tx_buf[msg->tx_len - 1] = 0x80 ^
+ peci_aw_fcs((u8 *)msg,
+ 2 + msg->tx_len);
+
+ /* Retry for at least 250ms before returning an error */
+ end = ktime_get();
+ elapsed_ms = ktime_to_ms(ktime_sub(end, start));
+ if (elapsed_ms >= DEV_PECI_RETRY_TIME_MS) {
+ dev_dbg(&adapter->dev, "Timeout retrying xfer!\n");
+ break;
+ }
+ } while (true);
+
+ rt_mutex_unlock(&adapter->bus_lock);
+
+ return rc;
+}
+
+static int peci_xfer(struct peci_adapter *adapter, struct peci_xfer_msg *msg)
+{
+ return peci_locked_xfer(adapter, msg, false, false);
+}
+
+static int peci_xfer_with_retries(struct peci_adapter *adapter,
+ struct peci_xfer_msg *msg,
+ bool has_aw_fcs)
+{
+ return peci_locked_xfer(adapter, msg, true, has_aw_fcs);
+}
+
+static int peci_scan_cmd_mask(struct peci_adapter *adapter)
+{
+ struct peci_xfer_msg msg;
+ u32 dib;
+ int rc = 0;
+
+ /* Update command mask just once */
+ if (adapter->cmd_mask & BIT(PECI_CMD_PING))
+ return 0;
+
+ msg.addr = PECI_BASE_ADDR;
+ msg.tx_len = GET_DIB_WR_LEN;
+ msg.rx_len = GET_DIB_RD_LEN;
+ msg.tx_buf[0] = GET_DIB_PECI_CMD;
+
+ rc = peci_xfer(adapter, &msg);
+ if (rc < 0) {
+ dev_dbg(&adapter->dev, "PECI xfer error, rc : %d\n", rc);
+ return rc;
+ }
+
+ dib = msg.rx_buf[0] | (msg.rx_buf[1] << 8) |
+ (msg.rx_buf[2] << 16) | (msg.rx_buf[3] << 24);
+
+ /* Check special case for Get DIB command */
+ if (dib == 0x00) {
+ dev_dbg(&adapter->dev, "DIB read as 0x00\n");
+ return -1;
+ }
+
+ if (!rc) {
+ /**
+ * setting up the supporting commands based on minor rev#
+ * see PECI Spec Table 3-1
+ */
+ dib = (dib >> 8) & 0xF;
+
+ if (dib >= 0x1) {
+ adapter->cmd_mask |= BIT(PECI_CMD_RD_PKG_CFG);
+ adapter->cmd_mask |= BIT(PECI_CMD_WR_PKG_CFG);
+ }
+
+ if (dib >= 0x2)
+ adapter->cmd_mask |= BIT(PECI_CMD_RD_IA_MSR);
+
+ if (dib >= 0x3) {
+ adapter->cmd_mask |= BIT(PECI_CMD_RD_PCI_CFG_LOCAL);
+ adapter->cmd_mask |= BIT(PECI_CMD_WR_PCI_CFG_LOCAL);
+ }
+
+ if (dib >= 0x4)
+ adapter->cmd_mask |= BIT(PECI_CMD_RD_PCI_CFG);
+
+ if (dib >= 0x5)
+ adapter->cmd_mask |= BIT(PECI_CMD_WR_PCI_CFG);
+
+ if (dib >= 0x6)
+ adapter->cmd_mask |= BIT(PECI_CMD_WR_IA_MSR);
+
+ adapter->cmd_mask |= BIT(PECI_CMD_GET_TEMP);
+ adapter->cmd_mask |= BIT(PECI_CMD_GET_DIB);
+ adapter->cmd_mask |= BIT(PECI_CMD_PING);
+ } else {
+ dev_dbg(&adapter->dev, "Error reading DIB, rc : %d\n", rc);
+ }
+
+ return rc;
+}
+
+static int peci_cmd_support(struct peci_adapter *adapter, enum peci_cmd cmd)
+{
+ if (!(adapter->cmd_mask & BIT(PECI_CMD_PING)) &&
+ peci_scan_cmd_mask(adapter) < 0) {
+ dev_dbg(&adapter->dev, "Failed to scan command mask\n");
+ return -EIO;
+ }
+
+ if (!(adapter->cmd_mask & BIT(cmd))) {
+ dev_dbg(&adapter->dev, "Command %d is not supported\n", cmd);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int peci_ioctl_ping(struct peci_adapter *adapter, void *vmsg)
+{
+ struct peci_ping_msg *umsg = vmsg;
+ struct peci_xfer_msg msg;
+ int rc;
+
+ rc = peci_cmd_support(adapter, PECI_CMD_PING);
+ if (rc < 0)
+ return rc;
+
+ msg.addr = umsg->addr;
+ msg.tx_len = 0;
+ msg.rx_len = 0;
+
+ rc = peci_xfer(adapter, &msg);
+ if (rc < 0)
+ return rc;
+
+ return 0;
+}
+
+static int peci_ioctl_get_dib(struct peci_adapter *adapter, void *vmsg)
+{
+ struct peci_get_dib_msg *umsg = vmsg;
+ struct peci_xfer_msg msg;
+ int rc;
+
+ rc = peci_cmd_support(adapter, PECI_CMD_GET_DIB);
+ if (rc < 0)
+ return rc;
+
+ msg.addr = umsg->addr;
+ msg.tx_len = GET_DIB_WR_LEN;
+ msg.rx_len = GET_DIB_RD_LEN;
+ msg.tx_buf[0] = GET_DIB_PECI_CMD;
+
+ rc = peci_xfer(adapter, &msg);
+ if (rc < 0)
+ return rc;
+
+ umsg->dib = msg.rx_buf[0] | (msg.rx_buf[1] << 8) |
+ (msg.rx_buf[2] << 16) | (msg.rx_buf[3] << 24);
+
+ return 0;
+}
+
+static int peci_ioctl_get_temp(struct peci_adapter *adapter, void *vmsg)
+{
+ struct peci_get_temp_msg *umsg = vmsg;
+ struct peci_xfer_msg msg;
+ int rc;
+
+ rc = peci_cmd_support(adapter, PECI_CMD_GET_TEMP);
+ if (rc < 0)
+ return rc;
+
+ msg.addr = umsg->addr;
+ msg.tx_len = GET_TEMP_WR_LEN;
+ msg.rx_len = GET_TEMP_RD_LEN;
+ msg.tx_buf[0] = GET_TEMP_PECI_CMD;
+
+ rc = peci_xfer(adapter, &msg);
+ if (rc < 0)
+ return rc;
+
+ umsg->temp_raw = msg.rx_buf[0] | (msg.rx_buf[1] << 8);
+
+ return 0;
+}
+
+static int peci_ioctl_rd_pkg_cfg(struct peci_adapter *adapter, void *vmsg)
+{
+ struct peci_rd_pkg_cfg_msg *umsg = vmsg;
+ struct peci_xfer_msg msg;
+ int rc = 0;
+
+ /* Per the PECI spec, the read length must be a byte, word, or dword */
+ if (umsg->rx_len != 1 && umsg->rx_len != 2 && umsg->rx_len != 4) {
+ dev_dbg(&adapter->dev, "Invalid read length, rx_len: %d\n",
+ umsg->rx_len);
+ return -EINVAL;
+ }
+
+ rc = peci_cmd_support(adapter, PECI_CMD_RD_PKG_CFG);
+ if (rc < 0)
+ return rc;
+
+ msg.addr = umsg->addr;
+ msg.tx_len = RDPKGCFG_WRITE_LEN;
+ /* read lengths of 1 and 2 result in an error, so only use 4 for now */
+ msg.rx_len = RDPKGCFG_READ_LEN_BASE + umsg->rx_len;
+ msg.tx_buf[0] = RDPKGCFG_PECI_CMD;
+ msg.tx_buf[1] = 0x00; /* request byte for Host ID / Retry bit */
+ /* Host ID is 0 for PECI 3.0 */
+ msg.tx_buf[2] = umsg->index; /* RdPkgConfig index */
+ msg.tx_buf[3] = (u8)umsg->param; /* LSB - Config parameter */
+ msg.tx_buf[4] = (u8)(umsg->param >> 8); /* MSB - Config parameter */
+
+ rc = peci_xfer_with_retries(adapter, &msg, false);
+ if (rc || msg.rx_buf[0] != DEV_PECI_CC_SUCCESS) {
+ dev_dbg(&adapter->dev, "xfer error, rc : %d\n", rc);
+ return -EIO;
+ }
+
+ memcpy(umsg->pkg_config, &msg.rx_buf[1], umsg->rx_len);
+
+ return rc;
+}
+
+static int peci_ioctl_wr_pkg_cfg(struct peci_adapter *adapter, void *vmsg)
+{
+ struct peci_wr_pkg_cfg_msg *umsg = vmsg;
+ struct peci_xfer_msg msg;
+ int rc = 0, i;
+
+ /* Per the PECI spec, the write length must be a dword */
+ if (umsg->tx_len != 4) {
+ dev_dbg(&adapter->dev, "Invalid write length, tx_len: %d\n",
+ umsg->tx_len);
+ return -EINVAL;
+ }
+
+ rc = peci_cmd_support(adapter, PECI_CMD_WR_PKG_CFG);
+ if (rc < 0)
+ return rc;
+
+ msg.addr = umsg->addr;
+ msg.tx_len = WRPKGCFG_WRITE_LEN_BASE + umsg->tx_len;
+ /* read lengths of 1 and 2 result in an error, so only use 4 for now */
+ msg.rx_len = WRPKGCFG_READ_LEN;
+ msg.tx_buf[0] = WRPKGCFG_PECI_CMD;
+ msg.tx_buf[1] = 0x00; /* request byte for Host ID / Retry bit */
+ /* Host ID is 0 for PECI 3.0 */
+ msg.tx_buf[2] = umsg->index; /* RdPkgConfig index */
+ msg.tx_buf[3] = (u8)umsg->param; /* LSB - Config parameter */
+ msg.tx_buf[4] = (u8)(umsg->param >> 8); /* MSB - Config parameter */
+ for (i = 0; i < umsg->tx_len; i++)
+ msg.tx_buf[5 + i] = (u8)(umsg->value >> (i << 3));
+
+ /* Add an Assure Write Frame Check Sequence byte */
+ msg.tx_buf[5 + i] = 0x80 ^
+ peci_aw_fcs((u8 *)&msg, 8 + umsg->tx_len);
+
+ rc = peci_xfer_with_retries(adapter, &msg, true);
+ if (rc || msg.rx_buf[0] != DEV_PECI_CC_SUCCESS) {
+ dev_dbg(&adapter->dev, "xfer error, rc : %d\n", rc);
+ return -EIO;
+ }
+
+ return rc;
+}
+
+static int peci_ioctl_rd_ia_msr(struct peci_adapter *adapter, void *vmsg)
+{
+ struct peci_rd_ia_msr_msg *umsg = vmsg;
+ struct peci_xfer_msg msg;
+ int rc = 0;
+
+ rc = peci_cmd_support(adapter, PECI_CMD_RD_IA_MSR);
+ if (rc < 0)
+ return rc;
+
+ msg.addr = umsg->addr;
+ msg.tx_len = RDIAMSR_WRITE_LEN;
+ msg.rx_len = RDIAMSR_READ_LEN;
+ msg.tx_buf[0] = RDIAMSR_PECI_CMD;
+ msg.tx_buf[1] = 0x00;
+ msg.tx_buf[2] = umsg->thread_id;
+ msg.tx_buf[3] = (u8)umsg->address;
+ msg.tx_buf[4] = (u8)(umsg->address >> 8);
+
+ rc = peci_xfer_with_retries(adapter, &msg, false);
+ if (rc || msg.rx_buf[0] != DEV_PECI_CC_SUCCESS) {
+ dev_dbg(&adapter->dev, "xfer error, rc : %d\n", rc);
+ return -EIO;
+ }
+
+ memcpy(&umsg->value, &msg.rx_buf[1], sizeof(uint64_t));
+
+ return rc;
+}
+
+static int peci_ioctl_rd_pci_cfg(struct peci_adapter *adapter, void *vmsg)
+{
+ struct peci_rd_pci_cfg_msg *umsg = vmsg;
+ struct peci_xfer_msg msg;
+ u32 address;
+ int rc = 0;
+
+ rc = peci_cmd_support(adapter, PECI_CMD_RD_PCI_CFG);
+ if (rc < 0)
+ return rc;
+
+ address = umsg->reg; /* [11:0] - Register */
+ address |= (u32)umsg->function << 12; /* [14:12] - Function */
+ address |= (u32)umsg->device << 15; /* [19:15] - Device */
+ address |= (u32)umsg->bus << 20; /* [27:20] - Bus */
+ /* [31:28] - Reserved */
+ msg.addr = umsg->addr;
+ msg.tx_len = RDPCICFG_WRITE_LEN;
+ msg.rx_len = RDPCICFG_READ_LEN;
+ msg.tx_buf[0] = RDPCICFG_PECI_CMD;
+ msg.tx_buf[1] = 0x00; /* request byte for Host ID / Retry bit */
+ /* Host ID is 0 for PECI 3.0 */
+ msg.tx_buf[2] = (u8)address; /* LSB - PCI Config Address */
+ msg.tx_buf[3] = (u8)(address >> 8); /* PCI Config Address */
+ msg.tx_buf[4] = (u8)(address >> 16); /* PCI Config Address */
+ msg.tx_buf[5] = (u8)(address >> 24); /* MSB - PCI Config Address */
+
+ rc = peci_xfer_with_retries(adapter, &msg, false);
+ if (rc || msg.rx_buf[0] != DEV_PECI_CC_SUCCESS) {
+ dev_dbg(&adapter->dev, "xfer error, rc : %d\n", rc);
+ return -EIO;
+ }
+
+ memcpy(umsg->pci_config, &msg.rx_buf[1], 4);
+
+ return rc;
+}
+
+static int peci_ioctl_rd_pci_cfg_local(struct peci_adapter *adapter, void *vmsg)
+{
+ struct peci_rd_pci_cfg_local_msg *umsg = vmsg;
+ struct peci_xfer_msg msg;
+ u32 address;
+ int rc = 0;
+
+ /* Per the PECI spec, the read length must be a byte, word, or dword */
+ if (umsg->rx_len != 1 && umsg->rx_len != 2 && umsg->rx_len != 4) {
+ dev_dbg(&adapter->dev, "Invalid read length, rx_len: %d\n",
+ umsg->rx_len);
+ return -EINVAL;
+ }
+
+ rc = peci_cmd_support(adapter, PECI_CMD_RD_PCI_CFG_LOCAL);
+ if (rc < 0)
+ return rc;
+
+ address = umsg->reg; /* [11:0] - Register */
+ address |= (u32)umsg->function << 12; /* [14:12] - Function */
+ address |= (u32)umsg->device << 15; /* [19:15] - Device */
+ address |= (u32)umsg->bus << 20; /* [23:20] - Bus */
+
+ msg.addr = umsg->addr;
+ msg.tx_len = RDPCICFGLOCAL_WRITE_LEN;
+ msg.rx_len = RDPCICFGLOCAL_READ_LEN_BASE + umsg->rx_len;
+ msg.tx_buf[0] = RDPCICFGLOCAL_PECI_CMD;
+ msg.tx_buf[1] = 0x00; /* request byte for Host ID / Retry bit */
+ /* Host ID is 0 for PECI 3.0 */
+ msg.tx_buf[2] = (u8)address; /* LSB - PCI Configuration Address */
+ msg.tx_buf[3] = (u8)(address >> 8); /* PCI Configuration Address */
+ msg.tx_buf[4] = (u8)(address >> 16); /* PCI Configuration Address */
+
+ rc = peci_xfer_with_retries(adapter, &msg, false);
+ if (rc || msg.rx_buf[0] != DEV_PECI_CC_SUCCESS) {
+ dev_dbg(&adapter->dev, "xfer error, rc : %d\n", rc);
+ return -EIO;
+ }
+
+ memcpy(umsg->pci_config, &msg.rx_buf[1], umsg->rx_len);
+
+ return rc;
+}
+
+static int peci_ioctl_wr_pci_cfg_local(struct peci_adapter *adapter, void *vmsg)
+{
+ struct peci_wr_pci_cfg_local_msg *umsg = vmsg;
+ struct peci_xfer_msg msg;
+ u32 address;
+ int rc = 0, i;
+
+ /* Per the PECI spec, the write length must be a byte, word, or dword */
+ if (umsg->tx_len != 1 && umsg->tx_len != 2 && umsg->tx_len != 4) {
+ dev_dbg(&adapter->dev, "Invalid write length, tx_len: %d\n",
+ umsg->tx_len);
+ return -EINVAL;
+ }
+
+ rc = peci_cmd_support(adapter, PECI_CMD_RD_PCI_CFG_LOCAL);
+ if (rc < 0)
+ return rc;
+
+ address = umsg->reg; /* [11:0] - Register */
+ address |= (u32)umsg->function << 12; /* [14:12] - Function */
+ address |= (u32)umsg->device << 15; /* [19:15] - Device */
+ address |= (u32)umsg->bus << 20; /* [23:20] - Bus */
+
+ msg.addr = umsg->addr;
+ msg.tx_len = WRPCICFGLOCAL_WRITE_LEN_BASE + umsg->tx_len;
+ msg.rx_len = WRPCICFGLOCAL_READ_LEN;
+ msg.tx_buf[0] = WRPCICFGLOCAL_PECI_CMD;
+ msg.tx_buf[1] = 0x00; /* request byte for Host ID / Retry bit */
+ /* Host ID is 0 for PECI 3.0 */
+ msg.tx_buf[2] = (u8)address; /* LSB - PCI Configuration Address */
+ msg.tx_buf[3] = (u8)(address >> 8); /* PCI Configuration Address */
+ msg.tx_buf[4] = (u8)(address >> 16); /* PCI Configuration Address */
+ for (i = 0; i < umsg->tx_len; i++)
+ msg.tx_buf[5 + i] = (u8)(umsg->value >> (i << 3));
+
+ /* Add an Assure Write Frame Check Sequence byte */
+ msg.tx_buf[5 + i] = 0x80 ^
+ peci_aw_fcs((u8 *)&msg, 8 + umsg->tx_len);
+
+ rc = peci_xfer_with_retries(adapter, &msg, true);
+ if (rc || msg.rx_buf[0] != DEV_PECI_CC_SUCCESS) {
+ dev_dbg(&adapter->dev, "xfer error, rc : %d\n", rc);
+ return -EIO;
+ }
+
+ return rc;
+}
+
+typedef int (*peci_ioctl_fn_type)(struct peci_adapter *, void *);
+
+static peci_ioctl_fn_type peci_ioctl_fn[PECI_CMD_MAX] = {
+ NULL, /* Reserved */
+ peci_ioctl_ping,
+ peci_ioctl_get_dib,
+ peci_ioctl_get_temp,
+ peci_ioctl_rd_pkg_cfg,
+ peci_ioctl_wr_pkg_cfg,
+ peci_ioctl_rd_ia_msr,
+ NULL, /* Reserved */
+ peci_ioctl_rd_pci_cfg,
+ NULL, /* Reserved */
+ peci_ioctl_rd_pci_cfg_local,
+ peci_ioctl_wr_pci_cfg_local,
+};
+
+int peci_command(struct peci_adapter *adapter, enum peci_cmd cmd, void *vmsg)
+{
+ int ret = 0;
+
+ if (cmd >= PECI_CMD_MAX)
+ return -EINVAL;
+
+ dev_dbg(&adapter->dev, "%s, cmd=0x%02x\n", __func__, cmd);
+
+ if (!peci_ioctl_fn[cmd])
+ return -EINVAL;
+
+ ret = peci_ioctl_fn[cmd](adapter, vmsg);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(peci_command);
+
+static long peci_ioctl(struct file *file, unsigned int iocmd, unsigned long arg)
+{
+ struct peci_adapter *adapter = file->private_data;
+ void __user *argp = (void __user *)arg;
+ unsigned int msg_len;
+ enum peci_cmd cmd;
+ u8 *msg;
+ int rc = 0;
+
+ dev_dbg(&adapter->dev, "ioctl, cmd=0x%x, arg=0x%lx\n", iocmd, arg);
+
+ switch (iocmd) {
+ case PECI_IOC_PING:
+ case PECI_IOC_GET_DIB:
+ case PECI_IOC_GET_TEMP:
+ case PECI_IOC_RD_PKG_CFG:
+ case PECI_IOC_WR_PKG_CFG:
+ case PECI_IOC_RD_IA_MSR:
+ case PECI_IOC_RD_PCI_CFG:
+ case PECI_IOC_RD_PCI_CFG_LOCAL:
+ case PECI_IOC_WR_PCI_CFG_LOCAL:
+ cmd = _IOC_TYPE(iocmd) - PECI_IOC_BASE;
+ msg_len = _IOC_SIZE(iocmd);
+ break;
+
+ default:
+ dev_dbg(&adapter->dev, "Invalid ioctl cmd : 0x%x\n", iocmd);
+ return -EINVAL;
+ }
+
+ if (!msg_len)
+ return -EINVAL;
+
+ msg = memdup_user(argp, msg_len);
+ if (IS_ERR(msg))
+ return PTR_ERR(msg);
+
+ rc = peci_command(adapter, cmd, msg);
+
+ if (!rc && copy_to_user(argp, msg, msg_len))
+ rc = -EFAULT;
+
+ kfree(msg);
+ return (long)rc;
+}
+
+static int peci_open(struct inode *inode, struct file *file)
+{
+ unsigned int minor = iminor(inode);
+ struct peci_adapter *adapter;
+
+ adapter = peci_get_adapter(minor);
+ if (!adapter)
+ return -ENODEV;
+
+ file->private_data = adapter;
+
+ return 0;
+}
+
+static int peci_release(struct inode *inode, struct file *file)
+{
+ struct peci_adapter *adapter = file->private_data;
+
+ peci_put_adapter(adapter);
+ file->private_data = NULL;
+
+ return 0;
+}
+
+static const struct file_operations peci_fops = {
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = peci_ioctl,
+ .open = peci_open,
+ .release = peci_release,
+};
+
+static int peci_detect(struct peci_adapter *adapter, u8 addr)
+{
+ struct peci_xfer_msg msg;
+ int rc;
+
+ rc = peci_cmd_support(adapter, PECI_CMD_PING);
+ if (rc < 0)
+ return rc;
+
+ msg.addr = addr;
+ msg.tx_len = 0;
+ msg.rx_len = 0;
+
+ rc = peci_xfer(adapter, &msg);
+ if (rc < 0)
+ return rc;
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id *
+peci_of_match_device(const struct of_device_id *matches,
+ struct peci_client *client)
+{
+ if (!(client && matches))
+ return NULL;
+
+ return of_match_device(matches, &client->dev);
+}
+#endif
+
+const struct peci_device_id *peci_match_id(const struct peci_device_id *id,
+ struct peci_client *client)
+{
+ if (!(id && client))
+ return NULL;
+
+ while (id->name[0]) {
+ if (strcmp(client->name, id->name) == 0)
+ return id;
+ id++;
+ }
+
+ return NULL;
+}
+
+static int peci_device_match(struct device *dev, struct device_driver *drv)
+{
+ struct peci_client *client = peci_verify_client(dev);
+ struct peci_driver *driver;
+
+ /* Attempt an OF style match */
+ if (peci_of_match_device(drv->of_match_table, client))
+ return 1;
+
+ driver = to_peci_driver(drv);
+
+ if (peci_match_id(driver->id_table, client))
+ return 1;
+
+ return 0;
+}
+
+static int peci_device_probe(struct device *dev)
+{
+ struct peci_client *client = peci_verify_client(dev);
+ struct peci_driver *driver;
+ int status = -EINVAL;
+
+ if (!client)
+ return 0;
+
+ if (!peci_of_match_device(dev->driver->of_match_table, client))
+ return -ENODEV;
+
+ dev_dbg(dev, "%s: name:%s\n", __func__, client->name);
+
+ driver = to_peci_driver(dev->driver);
+ if (driver->probe)
+ status = driver->probe(client);
+
+ return status;
+}
+
+static int peci_device_remove(struct device *dev)
+{
+ struct peci_client *client = peci_verify_client(dev);
+ struct peci_driver *driver;
+ int status = 0;
+
+ if (!client || !dev->driver)
+ return 0;
+
+ driver = to_peci_driver(dev->driver);
+ if (driver->remove) {
+ dev_dbg(dev, "%s: name:%s\n", __func__, client->name);
+ status = driver->remove(client);
+ }
+
+ return status;
+}
+
+static void peci_device_shutdown(struct device *dev)
+{
+ struct peci_client *client = peci_verify_client(dev);
+ struct peci_driver *driver;
+
+ if (!client || !dev->driver)
+ return;
+
+ dev_dbg(dev, "%s: name:%s\n", __func__, client->name);
+
+ driver = to_peci_driver(dev->driver);
+ if (driver->shutdown)
+ driver->shutdown(client);
+}
+
+static struct bus_type peci_bus_type = {
+ .name = "peci",
+ .match = peci_device_match,
+ .probe = peci_device_probe,
+ .remove = peci_device_remove,
+ .shutdown = peci_device_shutdown,
+};
+
+static void peci_unregister_device(struct peci_client *client)
+{
+ if (client->dev.of_node)
+ of_node_clear_flag(client->dev.of_node, OF_POPULATED);
+
+ device_unregister(&client->dev);
+}
+
+static int peci_check_addr_validity(u8 addr)
+{
+ if (addr < PECI_BASE_ADDR && addr > PECI_BASE_ADDR + PECI_OFFSET_MAX)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int peci_check_addr_busy(struct device *dev, void *addrp)
+{
+ struct peci_client *client = peci_verify_client(dev);
+ u8 addr = *(u8 *)addrp;
+
+ if (client && client->addr == addr)
+ return -EBUSY;
+
+ return 0;
+}
+
+static struct peci_client *peci_new_device(struct peci_adapter *adapter,
+ struct peci_board_info const *info)
+{
+ struct peci_client *client;
+ int rc;
+
+ client = kzalloc(sizeof(*client), GFP_KERNEL);
+ if (!client)
+ return NULL;
+
+ client->adapter = adapter;
+ client->addr = info->addr;
+ strlcpy(client->name, info->type, sizeof(client->name));
+
+ rc = peci_check_addr_validity(client->addr);
+ if (rc) {
+ dev_err(&adapter->dev, "Invalid PECI CPU address 0x%02hx\n",
+ client->addr);
+ goto err_free_client_silent;
+ }
+
+ /* Check for address business */
+ rc = device_for_each_child(&adapter->dev, &client->addr,
+ peci_check_addr_busy);
+ if (rc)
+ goto err_free_client;
+
+ /* Check client's online status */
+ rc = peci_detect(adapter, client->addr);
+ if (rc)
+ goto err_free_client;
+
+ client->dev.parent = &client->adapter->dev;
+ client->dev.bus = &peci_bus_type;
+ client->dev.type = &peci_client_type;
+ client->dev.of_node = info->of_node;
+ dev_set_name(&client->dev, "%d-%02x", adapter->nr, client->addr);
+ rc = device_register(&client->dev);
+ if (rc)
+ goto err_free_client;
+
+ dev_dbg(&adapter->dev, "client [%s] registered with bus id %s\n",
+ client->name, dev_name(&client->dev));
+
+ return client;
+
+err_free_client:
+ dev_err(&adapter->dev,
+ "Failed to register peci client %s at 0x%02x (%d)\n",
+ client->name, client->addr, rc);
+err_free_client_silent:
+ kfree(client);
+ return NULL;
+}
+
+#if IS_ENABLED(CONFIG_OF)
+static struct peci_client *peci_of_register_device(struct peci_adapter *adapter,
+ struct device_node *node)
+{
+ struct peci_client *result;
+ struct peci_board_info info = {};
+ const __be32 *addr_be;
+ u32 addr;
+ int len;
+
+ dev_dbg(&adapter->dev, "register %s\n", node->full_name);
+
+ if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) {
+ dev_err(&adapter->dev, "modalias failure on %s\n",
+ node->full_name);
+ return ERR_PTR(-EINVAL);
+ }
+
+ addr_be = of_get_property(node, "reg", &len);
+ if (!addr_be || len < sizeof(*addr_be)) {
+ dev_err(&adapter->dev, "invalid reg on %s\n",
+ node->full_name);
+ return ERR_PTR(-EINVAL);
+ }
+
+ addr = be32_to_cpup(addr_be);
+
+ if (peci_check_addr_validity(addr)) {
+ dev_err(&adapter->dev, "invalid addr=%x on %s\n",
+ addr, node->full_name);
+ return ERR_PTR(-EINVAL);
+ }
+
+ info.addr = addr;
+ info.of_node = of_node_get(node);
+
+ result = peci_new_device(adapter, &info);
+ if (!result)
+ result = ERR_PTR(-EINVAL);
+
+ of_node_put(node);
+ return result;
+}
+
+static void peci_of_register_devices(struct peci_adapter *adapter)
+{
+ struct device_node *bus, *node;
+ struct peci_client *client;
+
+ /* Only register child devices if the adapter has a node pointer set */
+ if (!adapter->dev.of_node)
+ return;
+
+ bus = of_get_child_by_name(adapter->dev.of_node, "peci-bus");
+ if (!bus)
+ bus = of_node_get(adapter->dev.of_node);
+
+ for_each_available_child_of_node(bus, node) {
+ if (of_node_test_and_set_flag(node, OF_POPULATED))
+ continue;
+
+ client = peci_of_register_device(adapter, node);
+ if (IS_ERR(client)) {
+ dev_warn(&adapter->dev,
+ "Failed to create PECI device for %s\n",
+ node->full_name);
+ of_node_clear_flag(node, OF_POPULATED);
+ }
+ }
+
+ of_node_put(bus);
+}
+
+static int peci_of_match_node(struct device *dev, void *data)
+{
+ return dev->of_node == data;
+}
+
+/* must call put_device() when done with returned peci_client device */
+static struct peci_client *peci_of_find_device(struct device_node *node)
+{
+ struct device *dev;
+ struct peci_client *client;
+
+ dev = bus_find_device(&peci_bus_type, NULL, node, peci_of_match_node);
+ if (!dev)
+ return NULL;
+
+ client = peci_verify_client(dev);
+ if (!client)
+ put_device(dev);
+
+ return client;
+}
+
+/* must call put_device() when done with returned peci_adapter device */
+static struct peci_adapter *peci_of_find_adapter(struct device_node *node)
+{
+ struct device *dev;
+ struct peci_adapter *adapter;
+
+ dev = bus_find_device(&peci_bus_type, NULL, node, peci_of_match_node);
+ if (!dev)
+ return NULL;
+
+ adapter = peci_verify_adapter(dev);
+ if (!adapter)
+ put_device(dev);
+
+ return adapter;
+}
+#else
+static void peci_of_register_devices(struct peci_adapter *adapter) { }
+#endif /* CONFIG_OF */
+
+#if IS_ENABLED(CONFIG_OF_DYNAMIC)
+static int peci_of_notify(struct notifier_block *nb,
+ unsigned long action,
+ void *arg)
+{
+ struct of_reconfig_data *rd = arg;
+ struct peci_adapter *adapter;
+ struct peci_client *client;
+
+ switch (of_reconfig_get_state_change(action, rd)) {
+ case OF_RECONFIG_CHANGE_ADD:
+ adapter = peci_of_find_adapter(rd->dn->parent);
+ if (!adapter)
+ return NOTIFY_OK; /* not for us */
+
+ if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) {
+ put_device(&adapter->dev);
+ return NOTIFY_OK;
+ }
+
+ client = peci_of_register_device(adapter, rd->dn);
+ put_device(&adapter->dev);
+
+ if (IS_ERR(client)) {
+ dev_err(&adapter->dev,
+ "failed to create client for '%s'\n",
+ rd->dn->full_name);
+ of_node_clear_flag(rd->dn, OF_POPULATED);
+ return notifier_from_errno(PTR_ERR(client));
+ }
+ break;
+ case OF_RECONFIG_CHANGE_REMOVE:
+ /* already depopulated? */
+ if (!of_node_check_flag(rd->dn, OF_POPULATED))
+ return NOTIFY_OK;
+
+ /* find our device by node */
+ client = peci_of_find_device(rd->dn);
+ if (!client)
+ return NOTIFY_OK; /* no? not meant for us */
+
+ /* unregister takes one ref away */
+ peci_unregister_device(client);
+
+ /* and put the reference of the find */
+ put_device(&client->dev);
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block peci_of_notifier = {
+ .notifier_call = peci_of_notify,
+};
+#else
+extern struct notifier_block peci_of_notifier;
+#endif /* CONFIG_OF_DYNAMIC */
+
+static int peci_register_adapter(struct peci_adapter *adapter)
+{
+ int res = -EINVAL;
+
+ /* Can't register until after driver model init */
+ if (WARN_ON(!is_registered)) {
+ res = -EAGAIN;
+ goto err_free_idr;
+ }
+
+ if (WARN(!adapter->name[0], "peci adapter has no name"))
+ goto err_free_idr;
+
+ rt_mutex_init(&adapter->bus_lock);
+
+ dev_set_name(&adapter->dev, "peci%d", adapter->nr);
+ adapter->dev.bus = &peci_bus_type;
+ adapter->dev.type = &peci_adapter_type;
+ device_initialize(&adapter->dev);
+
+ /* cdev */
+ cdev_init(&adapter->cdev, &peci_fops);
+ adapter->cdev.owner = THIS_MODULE;
+ adapter->cdev.kobj.parent = &adapter->dev.kobj;
+ adapter->dev.devt = MKDEV(MAJOR(peci_devt), adapter->nr);
+ res = cdev_add(&adapter->cdev, adapter->dev.devt, 1);
+ if (res) {
+ pr_err("adapter '%s': can't add cdev (%d)\n",
+ adapter->name, res);
+ goto err_free_idr;
+ }
+ res = device_add(&adapter->dev);
+ if (res) {
+ pr_err("adapter '%s': can't add device (%d)\n",
+ adapter->name, res);
+ goto err_del_cdev;
+ }
+
+ dev_dbg(&adapter->dev, "adapter [%s] registered\n", adapter->name);
+
+ /* create pre-declared device nodes */
+ peci_of_register_devices(adapter);
+
+ return 0;
+
+err_del_cdev:
+ cdev_del(&adapter->cdev);
+err_free_idr:
+ mutex_lock(&core_lock);
+ idr_remove(&peci_adapter_idr, adapter->nr);
+ mutex_unlock(&core_lock);
+ return res;
+}
+
+static int peci_add_numbered_adapter(struct peci_adapter *adapter)
+{
+ int id;
+
+ mutex_lock(&core_lock);
+ id = idr_alloc(&peci_adapter_idr, adapter,
+ adapter->nr, adapter->nr + 1, GFP_KERNEL);
+ mutex_unlock(&core_lock);
+ if (WARN(id < 0, "couldn't get idr"))
+ return id == -ENOSPC ? -EBUSY : id;
+
+ return peci_register_adapter(adapter);
+}
+
+int peci_add_adapter(struct peci_adapter *adapter)
+{
+ struct device *dev = &adapter->dev;
+ int id;
+
+ if (dev->of_node) {
+ id = of_alias_get_id(dev->of_node, "peci");
+ if (id >= 0) {
+ adapter->nr = id;
+ return peci_add_numbered_adapter(adapter);
+ }
+ }
+
+ mutex_lock(&core_lock);
+ id = idr_alloc(&peci_adapter_idr, adapter, 0, 0, GFP_KERNEL);
+ mutex_unlock(&core_lock);
+ if (WARN(id < 0, "couldn't get idr"))
+ return id;
+
+ adapter->nr = id;
+
+ return peci_register_adapter(adapter);
+}
+EXPORT_SYMBOL_GPL(peci_add_adapter);
+
+static int peci_unregister_client(struct device *dev, void *dummy)
+{
+ struct peci_client *client = peci_verify_client(dev);
+
+ if (client)
+ peci_unregister_device(client);
+
+ return 0;
+}
+
+void peci_del_adapter(struct peci_adapter *adapter)
+{
+ struct peci_adapter *found;
+
+ /* First make sure that this adapter was ever added */
+ mutex_lock(&core_lock);
+ found = idr_find(&peci_adapter_idr, adapter->nr);
+ mutex_unlock(&core_lock);
+
+ if (found != adapter)
+ return;
+
+ /**
+ * Detach any active clients. This can't fail, thus we do not
+ * check the returned value.
+ */
+ device_for_each_child(&adapter->dev, NULL, peci_unregister_client);
+
+ /* device name is gone after device_unregister */
+ dev_dbg(&adapter->dev, "adapter [%s] unregistered\n", adapter->name);
+
+ device_unregister(&adapter->dev);
+
+ /* free cdev */
+ cdev_del(&adapter->cdev);
+
+ /* free bus id */
+ mutex_lock(&core_lock);
+ idr_remove(&peci_adapter_idr, adapter->nr);
+ mutex_unlock(&core_lock);
+}
+EXPORT_SYMBOL_GPL(peci_del_adapter);
+
+/**
+ * A peci_driver is used with one or more peci_client (device) nodes to access
+ * peci clients, on a bus instance associated with some peci_adapter.
+ */
+int peci_register_driver(struct module *owner, struct peci_driver *driver)
+{
+ int res;
+
+ /* Can't register until after driver model init */
+ if (WARN_ON(!is_registered))
+ return -EAGAIN;
+
+ /* add the driver to the list of peci drivers in the driver core */
+ driver->driver.owner = owner;
+ driver->driver.bus = &peci_bus_type;
+
+ /**
+ * When registration returns, the driver core
+ * will have called probe() for all matching-but-unbound devices.
+ */
+ res = driver_register(&driver->driver);
+ if (res)
+ return res;
+
+ pr_debug("driver [%s] registered\n", driver->driver.name);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(peci_register_driver);
+
+void peci_del_driver(struct peci_driver *driver)
+{
+ driver_unregister(&driver->driver);
+ pr_debug("driver [%s] unregistered\n", driver->driver.name);
+}
+EXPORT_SYMBOL_GPL(peci_del_driver);
+
+static int __init peci_init(void)
+{
+ int ret;
+
+ ret = bus_register(&peci_bus_type);
+ if (ret < 0) {
+ pr_err("peci: Failed to register PECI bus type!\n");
+ return ret;
+ }
+
+ ret = alloc_chrdev_region(&peci_devt, 0, PECI_CDEV_MAX, "peci");
+ if (ret < 0) {
+ pr_err("peci: Failed to allocate chr dev region!\n");
+ bus_unregister(&peci_bus_type);
+ return ret;
+ }
+
+ crc8_populate_msb(peci_crc8_table, PECI_CRC8_POLYNOMIAL);
+
+ if (IS_ENABLED(CONFIG_OF_DYNAMIC))
+ WARN_ON(of_reconfig_notifier_register(&peci_of_notifier));
+
+ is_registered = true;
+
+ return 0;
+}
+
+static void __exit peci_exit(void)
+{
+ if (IS_ENABLED(CONFIG_OF_DYNAMIC))
+ WARN_ON(of_reconfig_notifier_unregister(&peci_of_notifier));
+
+ unregister_chrdev_region(peci_devt, PECI_CDEV_MAX);
+ bus_unregister(&peci_bus_type);
+}
+
+postcore_initcall(peci_init);
+module_exit(peci_exit);
+
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
+MODULE_DESCRIPTION("PECI bus core module");
+MODULE_LICENSE("GPL v2");
new file mode 100644
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Intel Corporation
+
+#ifndef __LINUX_PECI_H
+#define __LINUX_PECI_H
+
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/peci-ioctl.h>
+#include <linux/rtmutex.h>
+
+#define PECI_BUFFER_SIZE 32
+#define PECI_NAME_SIZE 32
+
+struct peci_xfer_msg {
+ u8 addr;
+ u8 tx_len;
+ u8 rx_len;
+ u8 tx_buf[PECI_BUFFER_SIZE];
+ u8 rx_buf[PECI_BUFFER_SIZE];
+} __attribute__((__packed__));
+
+struct peci_board_info {
+ char type[PECI_NAME_SIZE];
+ u8 addr; /* CPU client address */
+ struct device_node *of_node;
+};
+
+struct peci_adapter {
+ struct module *owner;
+ struct rt_mutex bus_lock;
+ struct device dev;
+ struct cdev cdev;
+ int nr;
+ char name[PECI_NAME_SIZE];
+ int (*xfer)(struct peci_adapter *adapter,
+ struct peci_xfer_msg *msg);
+ uint cmd_mask;
+};
+
+#define to_peci_adapter(d) container_of(d, struct peci_adapter, dev)
+
+static inline void *peci_get_adapdata(const struct peci_adapter *adapter)
+{
+ return dev_get_drvdata(&adapter->dev);
+}
+
+static inline void peci_set_adapdata(struct peci_adapter *adapter, void *data)
+{
+ dev_set_drvdata(&adapter->dev, data);
+}
+
+struct peci_client {
+ struct device dev; /* the device structure */
+ struct peci_adapter *adapter; /* the adapter we sit on */
+ u8 addr; /* CPU client address */
+ char name[PECI_NAME_SIZE];
+};
+
+#define to_peci_client(d) container_of(d, struct peci_client, dev)
+
+struct peci_device_id {
+ char name[PECI_NAME_SIZE];
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
+struct peci_driver {
+ int (*probe)(struct peci_client *client);
+ int (*remove)(struct peci_client *client);
+ void (*shutdown)(struct peci_client *client);
+ struct device_driver driver;
+ const struct peci_device_id *id_table;
+};
+
+#define to_peci_driver(d) container_of(d, struct peci_driver, driver)
+
+/**
+ * module_peci_driver() - Helper macro for registering a modular PECI driver
+ * @__peci_driver: peci_driver struct
+ *
+ * Helper macro for PECI drivers which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+#define module_peci_driver(__peci_driver) \
+ module_driver(__peci_driver, peci_add_driver, peci_del_driver)
+
+/* use a define to avoid include chaining to get THIS_MODULE */
+#define peci_add_driver(driver) peci_register_driver(THIS_MODULE, driver)
+
+int peci_register_driver(struct module *owner, struct peci_driver *drv);
+void peci_del_driver(struct peci_driver *driver);
+int peci_add_adapter(struct peci_adapter *adapter);
+void peci_del_adapter(struct peci_adapter *adapter);
+int peci_command(struct peci_adapter *adpater, enum peci_cmd cmd, void *vmsg);
+
+#endif /* __LINUX_PECI_H */
new file mode 100644
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Intel Corporation
+
+#ifndef __PECI_IOCTL_H
+#define __PECI_IOCTL_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/* Base Address of 48d */
+#define PECI_BASE_ADDR 0x30 /* The PECI client's default address of 0x30 */
+#define PECI_OFFSET_MAX 8 /* Max numver of CPU clients */
+
+/* PCI Access */
+#define MAX_PCI_READ_LEN 24 /* Number of bytes of the PCI Space read */
+
+#define PCI_BUS0_CPU0 0x00
+#define PCI_BUS0_CPU1 0x80
+#define PCI_CPUBUSNO_BUS 0x00
+#define PCI_CPUBUSNO_DEV 0x08
+#define PCI_CPUBUSNO_FUNC 0x02
+#define PCI_CPUBUSNO 0xcc
+#define PCI_CPUBUSNO_1 0xd0
+#define PCI_CPUBUSNO_VALID 0xd4
+
+/* Package Identifier Read Parameter Value */
+#define PKG_ID_CPU_ID 0x0000 /* CPUID Info */
+#define PKG_ID_PLATFORM_ID 0x0001 /* Platform ID */
+#define PKG_ID_UNCORE_ID 0x0002 /* Uncore Device ID */
+#define PKG_ID_MAX_THREAD_ID 0x0003 /* Max Thread ID */
+#define PKG_ID_MICROCODE_REV 0x0004 /* CPU Microcode Update Revision */
+#define PKG_ID_MACHINE_CHECK_STATUS 0x0005 /* Machine Check Status */
+
+/* RdPkgConfig Index */
+#define MBX_INDEX_CPU_ID 0 /* Package Identifier Read */
+#define MBX_INDEX_VR_DEBUG 1 /* VR Debug */
+#define MBX_INDEX_PKG_TEMP_READ 2 /* Package Temperature Read */
+#define MBX_INDEX_ENERGY_COUNTER 3 /* Energy counter */
+#define MBX_INDEX_ENERGY_STATUS 4 /* DDR Energy Status */
+#define MBX_INDEX_WAKE_MODE_BIT 5 /* "Wake on PECI" Mode bit */
+#define MBX_INDEX_EPI 6 /* Efficient Performance Indication */
+#define MBX_INDEX_PKG_RAPL_PERF 8 /* Pkg RAPL Performance Status Read */
+#define MBX_INDEX_PER_CORE_DTS_TEMP 9 /* Per Core DTS Temperature Read */
+#define MBX_INDEX_DTS_MARGIN 10 /* DTS thermal margin */
+#define MBX_INDEX_SKT_PWR_THRTL_DUR 11 /* Socket Power Throttled Duration */
+#define MBX_INDEX_CFG_TDP_CONTROL 12 /* TDP Config Control */
+#define MBX_INDEX_CFG_TDP_LEVELS 13 /* TDP Config Levels */
+#define MBX_INDEX_DDR_DIMM_TEMP 14 /* DDR DIMM Temperature */
+#define MBX_INDEX_CFG_ICCMAX 15 /* Configurable ICCMAX */
+#define MBX_INDEX_TEMP_TARGET 16 /* Temperature Target Read */
+#define MBX_INDEX_CURR_CFG_LIMIT 17 /* Current Config Limit */
+#define MBX_INDEX_DIMM_TEMP_READ 20 /* Package Thermal Status Read */
+#define MBX_INDEX_DRAM_IMC_TMP_READ 22 /* DRAM IMC Temperature Read */
+#define MBX_INDEX_DDR_CH_THERM_STAT 23 /* DDR Channel Thermal Status */
+#define MBX_INDEX_PKG_POWER_LIMIT1 26 /* Package Power Limit1 */
+#define MBX_INDEX_PKG_POWER_LIMIT2 27 /* Package Power Limit2 */
+#define MBX_INDEX_TDP 28 /* Thermal design power minimum */
+#define MBX_INDEX_TDP_HIGH 29 /* Thermal design power maximum */
+#define MBX_INDEX_TDP_UNITS 30 /* Units for power/energy registers */
+#define MBX_INDEX_RUN_TIME 31 /* Accumulated Run Time */
+#define MBX_INDEX_CONSTRAINED_TIME 32 /* Thermally Constrained Time Read */
+#define MBX_INDEX_TURBO_RATIO 33 /* Turbo Activation Ratio */
+#define MBX_INDEX_DDR_RAPL_PL1 34 /* DDR RAPL PL1 */
+#define MBX_INDEX_DDR_PWR_INFO_HIGH 35 /* DRAM Power Info Read (high) */
+#define MBX_INDEX_DDR_PWR_INFO_LOW 36 /* DRAM Power Info Read (low) */
+#define MBX_INDEX_DDR_RAPL_PL2 37 /* DDR RAPL PL2 */
+#define MBX_INDEX_DDR_RAPL_STATUS 38 /* DDR RAPL Performance Status */
+#define MBX_INDEX_DDR_HOT_ABSOLUTE 43 /* DDR Hottest Dimm Absolute Temp */
+#define MBX_INDEX_DDR_HOT_RELATIVE 44 /* DDR Hottest Dimm Relative Temp */
+#define MBX_INDEX_DDR_THROTTLE_TIME 45 /* DDR Throttle Time */
+#define MBX_INDEX_DDR_THERM_STATUS 46 /* DDR Thermal Status */
+#define MBX_INDEX_TIME_AVG_TEMP 47 /* Package time-averaged temperature */
+#define MBX_INDEX_TURBO_RATIO_LIMIT 49 /* Turbo Ratio Limit Read */
+#define MBX_INDEX_HWP_AUTO_OOB 53 /* HWP Autonomous Out-of-band */
+#define MBX_INDEX_DDR_WARM_BUDGET 55 /* DDR Warm Power Budget */
+#define MBX_INDEX_DDR_HOT_BUDGET 56 /* DDR Hot Power Budget */
+#define MBX_INDEX_PKG_PSYS_PWR_LIM3 57 /* Package/Psys Power Limit3 */
+#define MBX_INDEX_PKG_PSYS_PWR_LIM1 58 /* Package/Psys Power Limit1 */
+#define MBX_INDEX_PKG_PSYS_PWR_LIM2 59 /* Package/Psys Power Limit2 */
+#define MBX_INDEX_PKG_PSYS_PWR_LIM4 60 /* Package/Psys Power Limit4 */
+#define MBX_INDEX_PERF_LIMIT_REASON 65 /* Performance Limit Reasons */
+
+/* WrPkgConfig Index */
+#define MBX_INDEX_DIMM_AMBIENT 19
+#define MBX_INDEX_DIMM_TEMP 24
+
+enum peci_cmd {
+ PECI_CMD_XFER = 0,
+ PECI_CMD_PING,
+ PECI_CMD_GET_DIB,
+ PECI_CMD_GET_TEMP,
+ PECI_CMD_RD_PKG_CFG,
+ PECI_CMD_WR_PKG_CFG,
+ PECI_CMD_RD_IA_MSR,
+ PECI_CMD_WR_IA_MSR,
+ PECI_CMD_RD_PCI_CFG,
+ PECI_CMD_WR_PCI_CFG,
+ PECI_CMD_RD_PCI_CFG_LOCAL,
+ PECI_CMD_WR_PCI_CFG_LOCAL,
+ PECI_CMD_MAX
+};
+
+struct peci_ping_msg {
+ __u8 addr;
+} __attribute__((__packed__));
+
+struct peci_get_dib_msg {
+ __u8 addr;
+ __u32 dib;
+} __attribute__((__packed__));
+
+struct peci_get_temp_msg {
+ __u8 addr;
+ __s16 temp_raw;
+} __attribute__((__packed__));
+
+struct peci_rd_pkg_cfg_msg {
+ __u8 addr;
+ __u8 index;
+ __u16 param;
+ __u8 rx_len;
+ __u8 pkg_config[4];
+} __attribute__((__packed__));
+
+struct peci_wr_pkg_cfg_msg {
+ __u8 addr;
+ __u8 index;
+ __u16 param;
+ __u8 tx_len;
+ __u32 value;
+} __attribute__((__packed__));
+
+struct peci_rd_ia_msr_msg {
+ __u8 addr;
+ __u8 thread_id;
+ __u16 address;
+ __u64 value;
+} __attribute__((__packed__));
+
+struct peci_rd_pci_cfg_msg {
+ __u8 addr;
+ __u8 bus;
+ __u8 device;
+ __u8 function;
+ __u16 reg;
+ __u8 pci_config[4];
+} __attribute__((__packed__));
+
+struct peci_rd_pci_cfg_local_msg {
+ __u8 addr;
+ __u8 bus;
+ __u8 device;
+ __u8 function;
+ __u16 reg;
+ __u8 rx_len;
+ __u8 pci_config[4];
+} __attribute__((__packed__));
+
+struct peci_wr_pci_cfg_local_msg {
+ __u8 addr;
+ __u8 bus;
+ __u8 device;
+ __u8 function;
+ __u16 reg;
+ __u8 tx_len;
+ __u32 value;
+} __attribute__((__packed__));
+
+#define PECI_IOC_BASE 'P'
+
+#define PECI_IOC_PING \
+ _IOWR(PECI_IOC_BASE + PECI_CMD_PING, 0, \
+ struct peci_ping_msg)
+
+#define PECI_IOC_GET_DIB \
+ _IOWR(PECI_IOC_BASE + PECI_CMD_GET_DIB, 0, \
+ struct peci_get_dib_msg)
+
+#define PECI_IOC_GET_TEMP \
+ _IOWR(PECI_IOC_BASE + PECI_CMD_GET_TEMP, 0, \
+ struct peci_get_temp_msg)
+
+#define PECI_IOC_RD_PKG_CFG \
+ _IOWR(PECI_IOC_BASE + PECI_CMD_RD_PKG_CFG, 0, \
+ struct peci_rd_pkg_cfg_msg)
+
+#define PECI_IOC_WR_PKG_CFG \
+ _IOWR(PECI_IOC_BASE + PECI_CMD_WR_PKG_CFG, 0, \
+ struct peci_wr_pkg_cfg_msg)
+
+#define PECI_IOC_RD_IA_MSR \
+ _IOWR(PECI_IOC_BASE + PECI_CMD_RD_IA_MSR, 0, \
+ struct peci_rd_ia_msr_msg)
+
+#define PECI_IOC_RD_PCI_CFG \
+ _IOWR(PECI_IOC_BASE + PECI_CMD_RD_PCI_CFG, 0, \
+ struct peci_rd_pci_cfg_msg)
+
+#define PECI_IOC_RD_PCI_CFG_LOCAL \
+ _IOWR(PECI_IOC_BASE + PECI_CMD_RD_PCI_CFG_LOCAL, 0, \
+ struct peci_rd_pci_cfg_local_msg)
+
+#define PECI_IOC_WR_PCI_CFG_LOCAL \
+ _IOWR(PECI_IOC_BASE + PECI_CMD_WR_PCI_CFG_LOCAL, 0, \
+ struct peci_wr_pci_cfg_local_msg)
+
+#endif /* __PECI_IOCTL_H */
This commit adds driver implementation for PECI bus into linux driver framework. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> --- drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/peci/Kconfig | 20 + drivers/peci/Makefile | 6 + drivers/peci/peci-core.c | 1337 +++++++++++++++++++++++++++++++++++++++ include/linux/peci.h | 97 +++ include/uapi/linux/peci-ioctl.h | 207 ++++++ 7 files changed, 1670 insertions(+) create mode 100644 drivers/peci/Kconfig create mode 100644 drivers/peci/Makefile create mode 100644 drivers/peci/peci-core.c create mode 100644 include/linux/peci.h create mode 100644 include/uapi/linux/peci-ioctl.h