| Message ID | 1517968819-12869-4-git-send-email-ping.bai@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Feb 07, 2018 at 10:00:19AM +0800, Bai Ping wrote: > Add clk driver support for imx6sll. > > Signed-off-by: Bai Ping <ping.bai@nxp.com> > --- > change v1->v2 > - fix minor comment from stephen > change v2->v3 > - remove init_on array, use CLK_IS_CRITICAL flag to make sure > system critical clock is always on > --- > drivers/clk/imx/Makefile | 1 + > drivers/clk/imx/clk-imx6sll.c | 351 ++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 352 insertions(+) > create mode 100644 drivers/clk/imx/clk-imx6sll.c > > diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile > index f91f2b2..8c3baa7 100644 > --- a/drivers/clk/imx/Makefile > +++ b/drivers/clk/imx/Makefile > @@ -22,6 +22,7 @@ obj-$(CONFIG_SOC_IMX35) += clk-imx35.o > obj-$(CONFIG_SOC_IMX5) += clk-imx51-imx53.o > obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o > obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o > +obj-$(CONFIG_SOC_IMX6SLL) += clk-imx6sll.o > obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o > obj-$(CONFIG_SOC_IMX6UL) += clk-imx6ul.o > obj-$(CONFIG_SOC_IMX7D) += clk-imx7d.o > diff --git a/drivers/clk/imx/clk-imx6sll.c b/drivers/clk/imx/clk-imx6sll.c > new file mode 100644 > index 0000000..e902b27 > --- /dev/null > +++ b/drivers/clk/imx/clk-imx6sll.c > @@ -0,0 +1,351 @@ > +/* > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > + * Copyright 2017-2018 NXP. > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html SPDX tag instead? > + */ > + > +#include <dt-bindings/clock/imx6sll-clock.h> > +#include <linux/clk.h> > +#include <linux/clkdev.h> > +#include <linux/err.h> > +#include <linux/init.h> > +#include <linux/io.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/of_irq.h> > +#include <linux/types.h> > + > +#include "clk.h" > + > +#define CCM_ANALOG_PLL_BYPASS (0x1 << 16) > +#define BM_CCM_CCDR_MMDC_CH0_MASK (0x2 << 16) > +#define CCDR 0x4 There is no much point to use define for this particular offset. Or if you think it's really useful, please make the indent unified with other defines. > +#define xPLL_CLR(offset) (offset + 0x8) > + > +static const char *pll_bypass_src_sels[] = { "osc", "dummy", }; > +static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", }; > +static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", }; > +static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", }; > +static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", }; > +static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", }; > +static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; > +static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; > +static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; > +static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; > +static const char *axi_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_540m", }; > +static const char *axi_sels[] = {"periph", "axi_alt_sel", }; > +static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; > +static const char *periph2_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll4_audio_div", }; > +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", }; > +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "osc", }; > +static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; > +static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; > +static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; > +static const char *ssi_sels[] = {"pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", "dummy",}; > +static const char *spdif_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", }; > +static const char *ldb_di0_div_sels[] = { "ldb_di0_div_3_5", "ldb_di0_div_7", }; > +static const char *ldb_di1_div_sels[] = { "ldb_di1_div_3_5", "ldb_di1_div_7", }; > +static const char *ldb_di0_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", "pll3_pfd3_454m", }; > +static const char *ldb_di1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", }; > +static const char *lcdif_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", }; > +static const char *ecspi_sels[] = { "pll3_60m", "osc", }; > +static const char *uart_sels[] = { "pll3_80m", "osc", }; > +static const char *perclk_sels[] = { "ipg", "osc", }; > +static const char *lcdif_sels[] = { "lcdif_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; > + > +static const char *epdc_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", }; > +static const char *epdc_sels[] = { "epdc_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; > + > +static struct clk *clks[IMX6SLL_CLK_END]; > +static struct clk_onecell_data clk_data; > + > +static const struct clk_div_table post_div_table[] = { > + { .val = 2, .div = 1, }, > + { .val = 1, .div = 2, }, > + { .val = 0, .div = 4, }, > + { } > +}; > + > +static const struct clk_div_table video_div_table[] = { > + { .val = 0, .div = 1, }, > + { .val = 1, .div = 2, }, > + { .val = 2, .div = 1, }, > + { .val = 3, .div = 4, }, > + { } > +}; > + > +static u32 share_count_audio; > +static u32 share_count_ssi1; > +static u32 share_count_ssi2; > +static u32 share_count_ssi3; > + > +static void __init imx6sll_clocks_init(struct device_node *ccm_node) > +{ > + struct device_node *np; > + void __iomem *base; > + > + clks[IMX6SLL_CLK_DUMMY] = imx_clk_fixed("dummy", 0); > + > + clks[IMX6SLL_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil"); > + clks[IMX6SLL_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc"); > + > + /* ipp_di clock is external input */ > + clks[IMX6SLL_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, "ipp_di0"); > + clks[IMX6SLL_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, "ipp_di1"); > + > + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sll-anatop"); > + base = of_iomap(np, 0); > + WARN_ON(!base); > + > + /* Do not bypass PLLs initially */ > + writel_relaxed(CCM_ANALOG_PLL_BYPASS, base + xPLL_CLR(0x0)); > + writel_relaxed(CCM_ANALOG_PLL_BYPASS, base + xPLL_CLR(0x10)); > + writel_relaxed(CCM_ANALOG_PLL_BYPASS, base + xPLL_CLR(0x20)); > + writel_relaxed(CCM_ANALOG_PLL_BYPASS, base + xPLL_CLR(0x30)); > + writel_relaxed(CCM_ANALOG_PLL_BYPASS, base + xPLL_CLR(0x70)); > + writel_relaxed(CCM_ANALOG_PLL_BYPASS, base + xPLL_CLR(0xa0)); > + writel_relaxed(CCM_ANALOG_PLL_BYPASS, base + xPLL_CLR(0xe0)); > + > + clks[IMX6SLL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > + clks[IMX6SLL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > + clks[IMX6SLL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > + clks[IMX6SLL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > + clks[IMX6SLL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > + clks[IMX6SLL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > + clks[IMX6SLL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > + > + clks[IMX6SLL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f); > + clks[IMX6SLL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1); > + clks[IMX6SLL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3); > + clks[IMX6SLL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f); > + clks[IMX6SLL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f); > + clks[IMX6SLL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3); > + clks[IMX6SLL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3); > + > + > + clks[IMX6SLL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); > + clks[IMX6SLL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); > + clks[IMX6SLL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); > + clks[IMX6SLL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT); > + clks[IMX6SLL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); > + clks[IMX6SLL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT); > + clks[IMX6SLL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT); > + > + clks[IMX6SLL_CLK_PLL1_SYS] = imx_clk_fixed_factor("pll1_sys", "pll1_bypass", 1, 1); > + clks[IMX6SLL_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13); > + clks[IMX6SLL_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13); > + clks[IMX6SLL_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13); > + clks[IMX6SLL_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13); > + clks[IMX6SLL_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13); > + clks[IMX6SLL_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13); > + > + /* > + * Bit 20 is the reserved and read-only bit, we do this only for: > + * - Do nothing for usbphy clk_enable/disable > + * - Keep refcount when do usbphy clk_enable/disable, in that case, > + * the clk framework many need to enable/disable usbphy's parent > + */ > + clks[IMX6SLL_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20); > + clks[IMX6SLL_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20); > + > + /* > + * usbphy*_gate needs to be on after system boots up, and software > + * never needs to control it anymore. > + */ > + if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { > + clks[IMX6SLL_CLK_USBPHY1_GATE] = imx_clk_gate_flags("usbphy1_gate", "dummy", base + 0x10, 6, CLK_IS_CRITICAL); > + clks[IMX6SLL_CLK_USBPHY2_GATE] = imx_clk_gate_flags("usbphy2_gate", "dummy", base + 0x20, 6, CLK_IS_CRITICAL); > + } > + > + /* name parent_name reg idx */ > + clks[IMX6SLL_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); > + clks[IMX6SLL_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1); > + clks[IMX6SLL_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2); > + clks[IMX6SLL_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3_594m", "pll2_bus", base + 0x100, 3); > + clks[IMX6SLL_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0); > + clks[IMX6SLL_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1); > + clks[IMX6SLL_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2); > + clks[IMX6SLL_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3); The indent of the last number of last two line are unnecessarily broken. > + > + clks[IMX6SLL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", > + CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); > + clks[IMX6SLL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", > + CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x170, 15, 1, 0, &imx_ccm_lock); > + clks[IMX6SLL_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", > + CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock); > + clks[IMX6SLL_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", > + CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock); > + > + /* name parent_name mult div */ > + clks[IMX6SLL_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2); > + clks[IMX6SLL_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4); > + clks[IMX6SLL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); > + clks[IMX6SLL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); > + > + np = ccm_node; > + base = of_iomap(np, 0); > + WARN_ON(!base); > + > + clks[IMX6SLL_CLK_STEP] = imx_clk_mux("step", base + 0x0c, 8, 1, step_sels, ARRAY_SIZE(step_sels)); > + clks[IMX6SLL_CLK_PLL1_SW] = imx_clk_mux_flags("pll1_sw", base + 0x0c, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels), 0); > + clks[IMX6SLL_CLK_AXI_ALT_SEL] = imx_clk_mux("axi_alt_sel", base + 0x14, 7, 1, axi_alt_sels, ARRAY_SIZE(axi_alt_sels)); > + clks[IMX6SLL_CLK_AXI_SEL] = imx_clk_mux_flags("axi_sel", base + 0x14, 6, 1, axi_sels, ARRAY_SIZE(axi_sels), 0); The indent before 'base' can be better. > + clks[IMX6SLL_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); > + clks[IMX6SLL_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph2_pre_sels, ARRAY_SIZE(periph2_pre_sels)); > + clks[IMX6SLL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); > + clks[IMX6SLL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); > + clks[IMX6SLL_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); > + clks[IMX6SLL_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); > + clks[IMX6SLL_CLK_USDHC3_SEL] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); > + clks[IMX6SLL_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); > + clks[IMX6SLL_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); > + clks[IMX6SLL_CLK_SSI3_SEL] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); > + clks[IMX6SLL_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels)); > + clks[IMX6SLL_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels)); > + clks[IMX6SLL_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, spdif_sels, ARRAY_SIZE(spdif_sels)); > + clks[IMX6SLL_CLK_EXTERN_AUDIO_SEL] = imx_clk_mux("extern_audio_sel", base + 0x30, 7, 2, spdif_sels, ARRAY_SIZE(spdif_sels)); > + clks[IMX6SLL_CLK_EPDC_PRE_SEL] = imx_clk_mux("epdc_pre_sel", base + 0x34, 15, 3, epdc_pre_sels, ARRAY_SIZE(epdc_pre_sels)); > + clks[IMX6SLL_CLK_EPDC_SEL] = imx_clk_mux("epdc_sel", base + 0x34, 9, 3, epdc_sels, ARRAY_SIZE(epdc_sels)); > + clks[IMX6SLL_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels)); > + clks[IMX6SLL_CLK_LCDIF_PRE_SEL] = imx_clk_mux("lcdif_pre_sel", base + 0x38, 15, 3, lcdif_pre_sels, ARRAY_SIZE(lcdif_pre_sels)); > + clks[IMX6SLL_CLK_LCDIF_SEL] = imx_clk_mux("lcdif_sel", base + 0x38, 9, 3, lcdif_sels, ARRAY_SIZE(lcdif_sels)); > + > + clks[IMX6SLL_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels)); > + clks[IMX6SLL_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels)); > + > + clks[IMX6SLL_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3); > + clks[IMX6SLL_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3); > + clks[IMX6SLL_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2); > + clks[IMX6SLL_CLK_LCDIF_PODF] = imx_clk_divider("lcdif_podf", "lcdif_pred", base + 0x18, 23, 3); > + clks[IMX6SLL_CLK_PERCLK] = imx_clk_divider("perclk", "perclk_sel", base + 0x1c, 0, 6); > + clks[IMX6SLL_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3); > + clks[IMX6SLL_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3); > + clks[IMX6SLL_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3); > + clks[IMX6SLL_CLK_UART_PODF] = imx_clk_divider("uart_podf", "uart_sel", base + 0x24, 0, 6); > + clks[IMX6SLL_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3); > + clks[IMX6SLL_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6); > + clks[IMX6SLL_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3); > + clks[IMX6SLL_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6); > + clks[IMX6SLL_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3); > + clks[IMX6SLL_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6); > + clks[IMX6SLL_CLK_SPDIF_PRED] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3); > + clks[IMX6SLL_CLK_SPDIF_PODF] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3); > + clks[IMX6SLL_CLK_EXTERN_AUDIO_PRED] = imx_clk_divider("extern_audio_pred", "extern_audio_sel", base + 0x30, 12, 3); > + clks[IMX6SLL_CLK_EXTERN_AUDIO_PODF] = imx_clk_divider("extern_audio_podf", "extern_audio_pred", base + 0x30, 9, 3); For such long lines that cannot have a good indent, a single space may work better IMO. > + clks[IMX6SLL_CLK_EPDC_PODF] = imx_clk_divider("epdc_podf", "epdc_pre_sel", base + 0x34, 12, 3); > + clks[IMX6SLL_CLK_ECSPI_PODF] = imx_clk_divider("ecspi_podf", "ecspi_sel", base + 0x38, 19, 6); > + clks[IMX6SLL_CLK_LCDIF_PRED] = imx_clk_divider("lcdif_pred", "lcdif_pre_sel", base + 0x38, 12, 3); > + > + clks[IMX6SLL_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16); > + clks[IMX6SLL_CLK_MMDC_PODF] = imx_clk_busy_divider("mmdc_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2); > + clks[IMX6SLL_CLK_AXI_PODF] = imx_clk_busy_divider("axi", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0); > + clks[IMX6SLL_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1); > + > + clks[IMX6SLL_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); > + clks[IMX6SLL_CLK_LDB_DI0_DIV_7] = imx_clk_fixed_factor("ldb_di0_div_7", "ldb_di0_sel", 1, 7); > + clks[IMX6SLL_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); > + clks[IMX6SLL_CLK_LDB_DI1_DIV_7] = imx_clk_fixed_factor("ldb_di1_div_7", "ldb_di1_sel", 1, 7); > + > + clks[IMX6SLL_CLK_LDB_DI0_SEL] = imx_clk_mux("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di0_sels, ARRAY_SIZE(ldb_di0_sels)); > + clks[IMX6SLL_CLK_LDB_DI1_SEL] = imx_clk_mux("ldb_di1_sel", base + 0x1c, 7, 3, ldb_di1_sels, ARRAY_SIZE(ldb_di1_sels)); > + clks[IMX6SLL_CLK_LDB_DI0_DIV_SEL] = imx_clk_mux("ldb_di0_div_sel", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels)); > + clks[IMX6SLL_CLK_LDB_DI1_DIV_SEL] = imx_clk_mux("ldb_di1_div_sel", base + 0x20, 10, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels)); > + > + /* CCGR0 */ > + clks[IMX6SLL_CLK_AIPSTZ1] = imx_clk_gate2_flags("aips_tz1", "ahb", base + 0x68, 0, CLK_IS_CRITICAL); > + clks[IMX6SLL_CLK_AIPSTZ2] = imx_clk_gate2_flags("aips_tz2", "ahb", base + 0x68, 2, CLK_IS_CRITICAL); Overall, the indent of this file looks pretty good, but some of them can still be better. The one before "ahb" here is another example. Please check through file one more time. Thanks. Shawn > + clks[IMX6SLL_CLK_DCP] = imx_clk_gate2("dcp", "ahb", base + 0x68, 10); > + clks[IMX6SLL_CLK_UART2_IPG] = imx_clk_gate2("uart2_ipg", "ipg", base + 0x68, 28); > + clks[IMX6SLL_CLK_UART2_SERIAL] = imx_clk_gate2("uart2_serial", "uart_podf", base + 0x68, 28); > + > + /* CCGR1 */ > + clks[IMX6SLL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0); > + clks[IMX6SLL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_podf", base + 0x6c, 2); > + clks[IMX6SLL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_podf", base + 0x6c, 4); > + clks[IMX6SLL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_podf", base + 0x6c, 6); > + clks[IMX6SLL_CLK_UART3_IPG] = imx_clk_gate2("uart3_ipg", "ipg", base + 0x6c, 10); > + clks[IMX6SLL_CLK_UART3_SERIAL] = imx_clk_gate2("uart3_serial", "uart_podf", base + 0x6c, 10); > + clks[IMX6SLL_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12); > + clks[IMX6SLL_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14); > + clks[IMX6SLL_CLK_GPT_BUS] = imx_clk_gate2("gpt1_bus", "perclk", base + 0x6c, 20); > + clks[IMX6SLL_CLK_GPT_SERIAL] = imx_clk_gate2("gpt1_serial", "perclk", base + 0x6c, 22); > + clks[IMX6SLL_CLK_UART4_IPG] = imx_clk_gate2("uart4_ipg", "ipg", base + 0x6c, 24); > + clks[IMX6SLL_CLK_UART4_SERIAL] = imx_clk_gate2("uart4_serail", "uart_podf", base + 0x6c, 24); > + > + /* CCGR2 */ > + clks[IMX6SLL_CLK_CSI] = imx_clk_gate2("csi", "axi", base + 0x70, 2); > + clks[IMX6SLL_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6); > + clks[IMX6SLL_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8); > + clks[IMX6SLL_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10); > + clks[IMX6SLL_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12); > + clks[IMX6SLL_CLK_LCDIF_APB] = imx_clk_gate2("lcdif_apb", "axi", base + 0x70, 28); > + clks[IMX6SLL_CLK_PXP] = imx_clk_gate2("pxp", "axi", base + 0x70, 30); > + > + /* CCGR3 */ > + clks[IMX6SLL_CLK_UART5_IPG] = imx_clk_gate2("uart5_ipg", "ipg", base + 0x74, 2); > + clks[IMX6SLL_CLK_UART5_SERIAL] = imx_clk_gate2("uart5_serial", "uart_podf", base + 0x74, 2); > + clks[IMX6SLL_CLK_EPDC_AXI] = imx_clk_gate2("epdc_aclk", "axi", base + 0x74, 4); > + clks[IMX6SLL_CLK_EPDC_PIX] = imx_clk_gate2("epdc_pix", "epdc_podf", base + 0x74, 4); > + clks[IMX6SLL_CLK_LCDIF_PIX] = imx_clk_gate2("lcdif_pix", "lcdif_podf", base + 0x74, 10); > + clks[IMX6SLL_CLK_WDOG1] = imx_clk_gate2("wdog1", "ipg", base + 0x74, 16); > + clks[IMX6SLL_CLK_MMDC_P0_FAST] = imx_clk_gate_flags("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20, CLK_IS_CRITICAL); > + clks[IMX6SLL_CLK_MMDC_P0_IPG] = imx_clk_gate2_flags("mmdc_p0_ipg", "ipg", base + 0x74, 24, CLK_IS_CRITICAL); > + clks[IMX6SLL_CLK_OCRAM] = imx_clk_gate_flags("ocram", "ahb", base + 0x74, 28, CLK_IS_CRITICAL); > + > + /* CCGR4 */ > + clks[IMX6SLL_CLK_PWM1] = imx_clk_gate2("pwm1", "perclk", base + 0x78, 16); > + clks[IMX6SLL_CLK_PWM2] = imx_clk_gate2("pwm2", "perclk", base + 0x78, 18); > + clks[IMX6SLL_CLK_PWM3] = imx_clk_gate2("pwm3", "perclk", base + 0x78, 20); > + clks[IMX6SLL_CLK_PWM4] = imx_clk_gate2("pwm4", "perclk", base + 0x78, 22); > + > + /* CCGR5 */ > + clks[IMX6SLL_CLK_ROM] = imx_clk_gate2_flags("rom", "ahb", base + 0x7c, 0, CLK_IS_CRITICAL); > + clks[IMX6SLL_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); > + clks[IMX6SLL_CLK_WDOG2] = imx_clk_gate2("wdog2", "ipg", base + 0x7c, 10); > + clks[IMX6SLL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); > + clks[IMX6SLL_CLK_EXTERN_AUDIO] = imx_clk_gate2_shared("extern_audio", "extern_audio_podf", base + 0x7c, 14, &share_count_audio); > + clks[IMX6SLL_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_audio); > + clks[IMX6SLL_CLK_SPDIF_GCLK] = imx_clk_gate2_shared("spdif_gclk", "ipg", base + 0x7c, 14, &share_count_audio); > + clks[IMX6SLL_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1); > + clks[IMX6SLL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1); > + clks[IMX6SLL_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2); > + clks[IMX6SLL_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2); > + clks[IMX6SLL_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3); > + clks[IMX6SLL_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3); > + clks[IMX6SLL_CLK_UART1_IPG] = imx_clk_gate2("uart1_ipg", "ipg", base + 0x7c, 24); > + clks[IMX6SLL_CLK_UART1_SERIAL] = imx_clk_gate2("uart1_serial", "uart_podf", base + 0x7c, 24); > + > + /* CCGR6 */ > + clks[IMX6SLL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0); > + clks[IMX6SLL_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2); > + clks[IMX6SLL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4); > + clks[IMX6SLL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6); > + > + /* mask handshake of mmdc */ > + writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR); > + > + imx_check_clocks(clks, ARRAY_SIZE(clks)); > + > + clk_data.clks = clks; > + clk_data.clk_num = ARRAY_SIZE(clks); > + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); > + > + /* Lower the AHB clock rate before changing the clock source. */ > + clk_set_rate(clks[IMX6SLL_CLK_AHB], 99000000); > + > + /* Change periph_pre clock to pll2_bus to adjust AXI rate to 264MHz */ > + clk_set_parent(clks[IMX6SLL_CLK_PERIPH_CLK2_SEL], clks[IMX6SLL_CLK_PLL3_USB_OTG]); > + clk_set_parent(clks[IMX6SLL_CLK_PERIPH], clks[IMX6SLL_CLK_PERIPH_CLK2]); > + clk_set_parent(clks[IMX6SLL_CLK_PERIPH_PRE], clks[IMX6SLL_CLK_PLL2_BUS]); > + clk_set_parent(clks[IMX6SLL_CLK_PERIPH], clks[IMX6SLL_CLK_PERIPH_PRE]); > + > + clk_set_rate(clks[IMX6SLL_CLK_AHB], 132000000); > +} > + > +CLK_OF_DECLARE(imx6sll, "fsl,imx6sll-ccm", imx6sll_clocks_init); > -- > 1.9.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> > a/drivers/clk/imx/clk-imx6sll.c b/drivers/clk/imx/clk-imx6sll.c new > > file mode 100644 index 0000000..e902b27 > > --- /dev/null > > +++ b/drivers/clk/imx/clk-imx6sll.c > > @@ -0,0 +1,351 @@ > > +/* > > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > > + * Copyright 2017-2018 NXP. > > + * > > + * The code contained herein is licensed under the GNU General Public > > + * License. You may obtain a copy of the GNU General Public License > > + * Version 2 or later at the following locations: > > SPDX tag instead? Thanks, will fix it. > > > + */ > > + > > +#include <dt-bindings/clock/imx6sll-clock.h> > > +#include <linux/clk.h> > > +#include <linux/clkdev.h> > > +#include <linux/err.h> > > +#include <linux/init.h> > > +#include <linux/io.h> > > +#include <linux/of.h> > > +#include <linux/of_address.h> > > +#include <linux/of_irq.h> > > +#include <linux/types.h> > > + > > +#include "clk.h" > > + > > +#define CCM_ANALOG_PLL_BYPASS (0x1 << 16) > > +#define BM_CCM_CCDR_MMDC_CH0_MASK (0x2 << 16) > > +#define CCDR 0x4 > > There is no much point to use define for this particular offset. Or if you think > it's really useful, please make the indent unified with other defines. > OK, will remove the define in V4. > > + clks[IMX6SLL_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0_352m", > "pll2_bus", base + 0x100, 0); > > + clks[IMX6SLL_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1_594m", > "pll2_bus", base + 0x100, 1); > > + clks[IMX6SLL_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2_396m", > "pll2_bus", base + 0x100, 2); > > + clks[IMX6SLL_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3_594m", > "pll2_bus", base + 0x100, 3); > > + clks[IMX6SLL_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0_720m", > "pll3_usb_otg", base + 0xf0, 0); > > + clks[IMX6SLL_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1_540m", > "pll3_usb_otg", base + 0xf0, 1); > > + clks[IMX6SLL_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2_508m", > "pll3_usb_otg", base + 0xf0, 2); > > + clks[IMX6SLL_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3_454m", > "pll3_usb_otg", base + 0xf0, 3); > > The indent of the last number of last two line are unnecessarily broken. > Thanks, I will go through this file to make the indent better. BR Jacky Bai
diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile index f91f2b2..8c3baa7 100644 --- a/drivers/clk/imx/Makefile +++ b/drivers/clk/imx/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_SOC_IMX35) += clk-imx35.o obj-$(CONFIG_SOC_IMX5) += clk-imx51-imx53.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o +obj-$(CONFIG_SOC_IMX6SLL) += clk-imx6sll.o obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o obj-$(CONFIG_SOC_IMX6UL) += clk-imx6ul.o obj-$(CONFIG_SOC_IMX7D) += clk-imx7d.o diff --git a/drivers/clk/imx/clk-imx6sll.c b/drivers/clk/imx/clk-imx6sll.c new file mode 100644 index 0000000..e902b27 --- /dev/null +++ b/drivers/clk/imx/clk-imx6sll.c @@ -0,0 +1,351 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <dt-bindings/clock/imx6sll-clock.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/types.h> + +#include "clk.h" + +#define CCM_ANALOG_PLL_BYPASS (0x1 << 16) +#define BM_CCM_CCDR_MMDC_CH0_MASK (0x2 << 16) +#define CCDR 0x4 +#define xPLL_CLR(offset) (offset + 0x8) + +static const char *pll_bypass_src_sels[] = { "osc", "dummy", }; +static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", }; +static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", }; +static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", }; +static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", }; +static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", }; +static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; +static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; +static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; +static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; +static const char *axi_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_540m", }; +static const char *axi_sels[] = {"periph", "axi_alt_sel", }; +static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; +static const char *periph2_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll4_audio_div", }; +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", }; +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "osc", }; +static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; +static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; +static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; +static const char *ssi_sels[] = {"pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", "dummy",}; +static const char *spdif_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", }; +static const char *ldb_di0_div_sels[] = { "ldb_di0_div_3_5", "ldb_di0_div_7", }; +static const char *ldb_di1_div_sels[] = { "ldb_di1_div_3_5", "ldb_di1_div_7", }; +static const char *ldb_di0_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", "pll3_pfd3_454m", }; +static const char *ldb_di1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", }; +static const char *lcdif_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", }; +static const char *ecspi_sels[] = { "pll3_60m", "osc", }; +static const char *uart_sels[] = { "pll3_80m", "osc", }; +static const char *perclk_sels[] = { "ipg", "osc", }; +static const char *lcdif_sels[] = { "lcdif_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; + +static const char *epdc_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", }; +static const char *epdc_sels[] = { "epdc_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; + +static struct clk *clks[IMX6SLL_CLK_END]; +static struct clk_onecell_data clk_data; + +static const struct clk_div_table post_div_table[] = { + { .val = 2, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 0, .div = 4, }, + { } +}; + +static const struct clk_div_table video_div_table[] = { + { .val = 0, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 2, .div = 1, }, + { .val = 3, .div = 4, }, + { } +}; + +static u32 share_count_audio; +static u32 share_count_ssi1; +static u32 share_count_ssi2; +static u32 share_count_ssi3; + +static void __init imx6sll_clocks_init(struct device_node *ccm_node) +{ + struct device_node *np; + void __iomem *base; + + clks[IMX6SLL_CLK_DUMMY] = imx_clk_fixed("dummy", 0); + + clks[IMX6SLL_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil"); + clks[IMX6SLL_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc"); + + /* ipp_di clock is external input */ + clks[IMX6SLL_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, "ipp_di0"); + clks[IMX6SLL_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, "ipp_di1"); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sll-anatop"); + base = of_iomap(np, 0); + WARN_ON(!base); + + /* Do not bypass PLLs initially */ + writel_relaxed(CCM_ANALOG_PLL_BYPASS, base + xPLL_CLR(0x0)); + writel_relaxed(CCM_ANALOG_PLL_BYPASS, base + xPLL_CLR(0x10)); + writel_relaxed(CCM_ANALOG_PLL_BYPASS, base + xPLL_CLR(0x20)); + writel_relaxed(CCM_ANALOG_PLL_BYPASS, base + xPLL_CLR(0x30)); + writel_relaxed(CCM_ANALOG_PLL_BYPASS, base + xPLL_CLR(0x70)); + writel_relaxed(CCM_ANALOG_PLL_BYPASS, base + xPLL_CLR(0xa0)); + writel_relaxed(CCM_ANALOG_PLL_BYPASS, base + xPLL_CLR(0xe0)); + + clks[IMX6SLL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + + clks[IMX6SLL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f); + clks[IMX6SLL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1); + clks[IMX6SLL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3); + clks[IMX6SLL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f); + clks[IMX6SLL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f); + clks[IMX6SLL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3); + clks[IMX6SLL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3); + + + clks[IMX6SLL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT); + + clks[IMX6SLL_CLK_PLL1_SYS] = imx_clk_fixed_factor("pll1_sys", "pll1_bypass", 1, 1); + clks[IMX6SLL_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13); + clks[IMX6SLL_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13); + clks[IMX6SLL_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13); + clks[IMX6SLL_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13); + clks[IMX6SLL_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13); + clks[IMX6SLL_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13); + + /* + * Bit 20 is the reserved and read-only bit, we do this only for: + * - Do nothing for usbphy clk_enable/disable + * - Keep refcount when do usbphy clk_enable/disable, in that case, + * the clk framework many need to enable/disable usbphy's parent + */ + clks[IMX6SLL_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20); + clks[IMX6SLL_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20); + + /* + * usbphy*_gate needs to be on after system boots up, and software + * never needs to control it anymore. + */ + if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { + clks[IMX6SLL_CLK_USBPHY1_GATE] = imx_clk_gate_flags("usbphy1_gate", "dummy", base + 0x10, 6, CLK_IS_CRITICAL); + clks[IMX6SLL_CLK_USBPHY2_GATE] = imx_clk_gate_flags("usbphy2_gate", "dummy", base + 0x20, 6, CLK_IS_CRITICAL); + } + + /* name parent_name reg idx */ + clks[IMX6SLL_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); + clks[IMX6SLL_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1); + clks[IMX6SLL_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2); + clks[IMX6SLL_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3_594m", "pll2_bus", base + 0x100, 3); + clks[IMX6SLL_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0); + clks[IMX6SLL_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1); + clks[IMX6SLL_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2); + clks[IMX6SLL_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3); + + clks[IMX6SLL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", + CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); + clks[IMX6SLL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", + CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x170, 15, 1, 0, &imx_ccm_lock); + clks[IMX6SLL_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", + CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock); + clks[IMX6SLL_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", + CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock); + + /* name parent_name mult div */ + clks[IMX6SLL_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2); + clks[IMX6SLL_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4); + clks[IMX6SLL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); + clks[IMX6SLL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); + + np = ccm_node; + base = of_iomap(np, 0); + WARN_ON(!base); + + clks[IMX6SLL_CLK_STEP] = imx_clk_mux("step", base + 0x0c, 8, 1, step_sels, ARRAY_SIZE(step_sels)); + clks[IMX6SLL_CLK_PLL1_SW] = imx_clk_mux_flags("pll1_sw", base + 0x0c, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels), 0); + clks[IMX6SLL_CLK_AXI_ALT_SEL] = imx_clk_mux("axi_alt_sel", base + 0x14, 7, 1, axi_alt_sels, ARRAY_SIZE(axi_alt_sels)); + clks[IMX6SLL_CLK_AXI_SEL] = imx_clk_mux_flags("axi_sel", base + 0x14, 6, 1, axi_sels, ARRAY_SIZE(axi_sels), 0); + clks[IMX6SLL_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); + clks[IMX6SLL_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph2_pre_sels, ARRAY_SIZE(periph2_pre_sels)); + clks[IMX6SLL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clks[IMX6SLL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); + clks[IMX6SLL_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SLL_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SLL_CLK_USDHC3_SEL] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SLL_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SLL_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SLL_CLK_SSI3_SEL] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SLL_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels)); + clks[IMX6SLL_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels)); + clks[IMX6SLL_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, spdif_sels, ARRAY_SIZE(spdif_sels)); + clks[IMX6SLL_CLK_EXTERN_AUDIO_SEL] = imx_clk_mux("extern_audio_sel", base + 0x30, 7, 2, spdif_sels, ARRAY_SIZE(spdif_sels)); + clks[IMX6SLL_CLK_EPDC_PRE_SEL] = imx_clk_mux("epdc_pre_sel", base + 0x34, 15, 3, epdc_pre_sels, ARRAY_SIZE(epdc_pre_sels)); + clks[IMX6SLL_CLK_EPDC_SEL] = imx_clk_mux("epdc_sel", base + 0x34, 9, 3, epdc_sels, ARRAY_SIZE(epdc_sels)); + clks[IMX6SLL_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels)); + clks[IMX6SLL_CLK_LCDIF_PRE_SEL] = imx_clk_mux("lcdif_pre_sel", base + 0x38, 15, 3, lcdif_pre_sels, ARRAY_SIZE(lcdif_pre_sels)); + clks[IMX6SLL_CLK_LCDIF_SEL] = imx_clk_mux("lcdif_sel", base + 0x38, 9, 3, lcdif_sels, ARRAY_SIZE(lcdif_sels)); + + clks[IMX6SLL_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels)); + clks[IMX6SLL_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels)); + + clks[IMX6SLL_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3); + clks[IMX6SLL_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3); + clks[IMX6SLL_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2); + clks[IMX6SLL_CLK_LCDIF_PODF] = imx_clk_divider("lcdif_podf", "lcdif_pred", base + 0x18, 23, 3); + clks[IMX6SLL_CLK_PERCLK] = imx_clk_divider("perclk", "perclk_sel", base + 0x1c, 0, 6); + clks[IMX6SLL_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3); + clks[IMX6SLL_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3); + clks[IMX6SLL_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3); + clks[IMX6SLL_CLK_UART_PODF] = imx_clk_divider("uart_podf", "uart_sel", base + 0x24, 0, 6); + clks[IMX6SLL_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3); + clks[IMX6SLL_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6); + clks[IMX6SLL_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3); + clks[IMX6SLL_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6); + clks[IMX6SLL_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3); + clks[IMX6SLL_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6); + clks[IMX6SLL_CLK_SPDIF_PRED] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3); + clks[IMX6SLL_CLK_SPDIF_PODF] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3); + clks[IMX6SLL_CLK_EXTERN_AUDIO_PRED] = imx_clk_divider("extern_audio_pred", "extern_audio_sel", base + 0x30, 12, 3); + clks[IMX6SLL_CLK_EXTERN_AUDIO_PODF] = imx_clk_divider("extern_audio_podf", "extern_audio_pred", base + 0x30, 9, 3); + clks[IMX6SLL_CLK_EPDC_PODF] = imx_clk_divider("epdc_podf", "epdc_pre_sel", base + 0x34, 12, 3); + clks[IMX6SLL_CLK_ECSPI_PODF] = imx_clk_divider("ecspi_podf", "ecspi_sel", base + 0x38, 19, 6); + clks[IMX6SLL_CLK_LCDIF_PRED] = imx_clk_divider("lcdif_pred", "lcdif_pre_sel", base + 0x38, 12, 3); + + clks[IMX6SLL_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16); + clks[IMX6SLL_CLK_MMDC_PODF] = imx_clk_busy_divider("mmdc_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2); + clks[IMX6SLL_CLK_AXI_PODF] = imx_clk_busy_divider("axi", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0); + clks[IMX6SLL_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1); + + clks[IMX6SLL_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); + clks[IMX6SLL_CLK_LDB_DI0_DIV_7] = imx_clk_fixed_factor("ldb_di0_div_7", "ldb_di0_sel", 1, 7); + clks[IMX6SLL_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); + clks[IMX6SLL_CLK_LDB_DI1_DIV_7] = imx_clk_fixed_factor("ldb_di1_div_7", "ldb_di1_sel", 1, 7); + + clks[IMX6SLL_CLK_LDB_DI0_SEL] = imx_clk_mux("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di0_sels, ARRAY_SIZE(ldb_di0_sels)); + clks[IMX6SLL_CLK_LDB_DI1_SEL] = imx_clk_mux("ldb_di1_sel", base + 0x1c, 7, 3, ldb_di1_sels, ARRAY_SIZE(ldb_di1_sels)); + clks[IMX6SLL_CLK_LDB_DI0_DIV_SEL] = imx_clk_mux("ldb_di0_div_sel", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels)); + clks[IMX6SLL_CLK_LDB_DI1_DIV_SEL] = imx_clk_mux("ldb_di1_div_sel", base + 0x20, 10, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels)); + + /* CCGR0 */ + clks[IMX6SLL_CLK_AIPSTZ1] = imx_clk_gate2_flags("aips_tz1", "ahb", base + 0x68, 0, CLK_IS_CRITICAL); + clks[IMX6SLL_CLK_AIPSTZ2] = imx_clk_gate2_flags("aips_tz2", "ahb", base + 0x68, 2, CLK_IS_CRITICAL); + clks[IMX6SLL_CLK_DCP] = imx_clk_gate2("dcp", "ahb", base + 0x68, 10); + clks[IMX6SLL_CLK_UART2_IPG] = imx_clk_gate2("uart2_ipg", "ipg", base + 0x68, 28); + clks[IMX6SLL_CLK_UART2_SERIAL] = imx_clk_gate2("uart2_serial", "uart_podf", base + 0x68, 28); + + /* CCGR1 */ + clks[IMX6SLL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0); + clks[IMX6SLL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_podf", base + 0x6c, 2); + clks[IMX6SLL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_podf", base + 0x6c, 4); + clks[IMX6SLL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_podf", base + 0x6c, 6); + clks[IMX6SLL_CLK_UART3_IPG] = imx_clk_gate2("uart3_ipg", "ipg", base + 0x6c, 10); + clks[IMX6SLL_CLK_UART3_SERIAL] = imx_clk_gate2("uart3_serial", "uart_podf", base + 0x6c, 10); + clks[IMX6SLL_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12); + clks[IMX6SLL_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14); + clks[IMX6SLL_CLK_GPT_BUS] = imx_clk_gate2("gpt1_bus", "perclk", base + 0x6c, 20); + clks[IMX6SLL_CLK_GPT_SERIAL] = imx_clk_gate2("gpt1_serial", "perclk", base + 0x6c, 22); + clks[IMX6SLL_CLK_UART4_IPG] = imx_clk_gate2("uart4_ipg", "ipg", base + 0x6c, 24); + clks[IMX6SLL_CLK_UART4_SERIAL] = imx_clk_gate2("uart4_serail", "uart_podf", base + 0x6c, 24); + + /* CCGR2 */ + clks[IMX6SLL_CLK_CSI] = imx_clk_gate2("csi", "axi", base + 0x70, 2); + clks[IMX6SLL_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6); + clks[IMX6SLL_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8); + clks[IMX6SLL_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10); + clks[IMX6SLL_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12); + clks[IMX6SLL_CLK_LCDIF_APB] = imx_clk_gate2("lcdif_apb", "axi", base + 0x70, 28); + clks[IMX6SLL_CLK_PXP] = imx_clk_gate2("pxp", "axi", base + 0x70, 30); + + /* CCGR3 */ + clks[IMX6SLL_CLK_UART5_IPG] = imx_clk_gate2("uart5_ipg", "ipg", base + 0x74, 2); + clks[IMX6SLL_CLK_UART5_SERIAL] = imx_clk_gate2("uart5_serial", "uart_podf", base + 0x74, 2); + clks[IMX6SLL_CLK_EPDC_AXI] = imx_clk_gate2("epdc_aclk", "axi", base + 0x74, 4); + clks[IMX6SLL_CLK_EPDC_PIX] = imx_clk_gate2("epdc_pix", "epdc_podf", base + 0x74, 4); + clks[IMX6SLL_CLK_LCDIF_PIX] = imx_clk_gate2("lcdif_pix", "lcdif_podf", base + 0x74, 10); + clks[IMX6SLL_CLK_WDOG1] = imx_clk_gate2("wdog1", "ipg", base + 0x74, 16); + clks[IMX6SLL_CLK_MMDC_P0_FAST] = imx_clk_gate_flags("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20, CLK_IS_CRITICAL); + clks[IMX6SLL_CLK_MMDC_P0_IPG] = imx_clk_gate2_flags("mmdc_p0_ipg", "ipg", base + 0x74, 24, CLK_IS_CRITICAL); + clks[IMX6SLL_CLK_OCRAM] = imx_clk_gate_flags("ocram", "ahb", base + 0x74, 28, CLK_IS_CRITICAL); + + /* CCGR4 */ + clks[IMX6SLL_CLK_PWM1] = imx_clk_gate2("pwm1", "perclk", base + 0x78, 16); + clks[IMX6SLL_CLK_PWM2] = imx_clk_gate2("pwm2", "perclk", base + 0x78, 18); + clks[IMX6SLL_CLK_PWM3] = imx_clk_gate2("pwm3", "perclk", base + 0x78, 20); + clks[IMX6SLL_CLK_PWM4] = imx_clk_gate2("pwm4", "perclk", base + 0x78, 22); + + /* CCGR5 */ + clks[IMX6SLL_CLK_ROM] = imx_clk_gate2_flags("rom", "ahb", base + 0x7c, 0, CLK_IS_CRITICAL); + clks[IMX6SLL_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); + clks[IMX6SLL_CLK_WDOG2] = imx_clk_gate2("wdog2", "ipg", base + 0x7c, 10); + clks[IMX6SLL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); + clks[IMX6SLL_CLK_EXTERN_AUDIO] = imx_clk_gate2_shared("extern_audio", "extern_audio_podf", base + 0x7c, 14, &share_count_audio); + clks[IMX6SLL_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_audio); + clks[IMX6SLL_CLK_SPDIF_GCLK] = imx_clk_gate2_shared("spdif_gclk", "ipg", base + 0x7c, 14, &share_count_audio); + clks[IMX6SLL_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1); + clks[IMX6SLL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1); + clks[IMX6SLL_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2); + clks[IMX6SLL_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2); + clks[IMX6SLL_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3); + clks[IMX6SLL_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3); + clks[IMX6SLL_CLK_UART1_IPG] = imx_clk_gate2("uart1_ipg", "ipg", base + 0x7c, 24); + clks[IMX6SLL_CLK_UART1_SERIAL] = imx_clk_gate2("uart1_serial", "uart_podf", base + 0x7c, 24); + + /* CCGR6 */ + clks[IMX6SLL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0); + clks[IMX6SLL_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2); + clks[IMX6SLL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4); + clks[IMX6SLL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6); + + /* mask handshake of mmdc */ + writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR); + + imx_check_clocks(clks, ARRAY_SIZE(clks)); + + clk_data.clks = clks; + clk_data.clk_num = ARRAY_SIZE(clks); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + + /* Lower the AHB clock rate before changing the clock source. */ + clk_set_rate(clks[IMX6SLL_CLK_AHB], 99000000); + + /* Change periph_pre clock to pll2_bus to adjust AXI rate to 264MHz */ + clk_set_parent(clks[IMX6SLL_CLK_PERIPH_CLK2_SEL], clks[IMX6SLL_CLK_PLL3_USB_OTG]); + clk_set_parent(clks[IMX6SLL_CLK_PERIPH], clks[IMX6SLL_CLK_PERIPH_CLK2]); + clk_set_parent(clks[IMX6SLL_CLK_PERIPH_PRE], clks[IMX6SLL_CLK_PLL2_BUS]); + clk_set_parent(clks[IMX6SLL_CLK_PERIPH], clks[IMX6SLL_CLK_PERIPH_PRE]); + + clk_set_rate(clks[IMX6SLL_CLK_AHB], 132000000); +} + +CLK_OF_DECLARE(imx6sll, "fsl,imx6sll-ccm", imx6sll_clocks_init);
Add clk driver support for imx6sll. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- change v1->v2 - fix minor comment from stephen change v2->v3 - remove init_on array, use CLK_IS_CRITICAL flag to make sure system critical clock is always on --- drivers/clk/imx/Makefile | 1 + drivers/clk/imx/clk-imx6sll.c | 351 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 352 insertions(+) create mode 100644 drivers/clk/imx/clk-imx6sll.c