@@ -136,6 +136,8 @@ struct pwm_device *
of_pwm_xlate_with_flags(struct pwm_chip *pc, const struct of_phandle_args *args)
{
struct pwm_device *pwm;
+ struct pwm_caps caps;
+ int modebit;
/* check, whether the driver supports a third cell for flags */
if (pc->of_pwm_n_cells < 3)
@@ -152,11 +154,23 @@ of_pwm_xlate_with_flags(struct pwm_chip *pc, const struct of_phandle_args *args)
if (IS_ERR(pwm))
return pwm;
+ pwm_get_caps(pc, pwm, &caps);
+
pwm->args.period = args->args[1];
pwm->args.polarity = PWM_POLARITY_NORMAL;
+ pwm->args.mode = BIT(ffs(caps.modes) - 1);
+
+ if (args->args_count > 2) {
+ if (args->args[2] & PWM_POLARITY_INVERTED)
+ pwm->args.polarity = PWM_POLARITY_INVERSED;
- if (args->args_count > 2 && args->args[2] & PWM_POLARITY_INVERTED)
- pwm->args.polarity = PWM_POLARITY_INVERSED;
+ for (modebit = PWM_MODE_COMPLEMENTARY_BIT;
+ modebit < PWM_MODE_CNT; modebit++)
+ if (args->args[2] & BIT(modebit)) {
+ pwm->args.mode = BIT(modebit);
+ break;
+ }
+ }
return pwm;
}
@@ -166,6 +180,7 @@ static struct pwm_device *
of_pwm_simple_xlate(struct pwm_chip *pc, const struct of_phandle_args *args)
{
struct pwm_device *pwm;
+ struct pwm_caps caps;
/* sanity check driver support */
if (pc->of_pwm_n_cells < 2)
@@ -182,7 +197,9 @@ of_pwm_simple_xlate(struct pwm_chip *pc, const struct of_phandle_args *args)
if (IS_ERR(pwm))
return pwm;
+ pwm_get_caps(pc, pwm, &caps);
pwm->args.period = args->args[1];
+ pwm->args.mode = BIT(ffs(caps.modes) - 1);
return pwm;
}
@@ -250,6 +267,39 @@ static bool pwm_ops_check(const struct pwm_ops *ops)
}
/**
+ * pwm_get_caps() - get PWM capabilities
+ * @chip: PWM chip
+ * @pwm: PWM device to get the capabilities for
+ * @caps: returned capabilities
+ *
+ * Retrievers capabilities for PWM device.
+ */
+void pwm_get_caps(struct pwm_chip *chip, struct pwm_device *pwm,
+ struct pwm_caps *caps)
+{
+ if (!chip || !pwm || !caps)
+ return;
+
+ if (chip->ops && chip->ops->get_caps)
+ pwm->chip->ops->get_caps(chip, pwm, caps);
+ else if (chip->get_default_caps)
+ chip->get_default_caps(caps);
+}
+EXPORT_SYMBOL_GPL(pwm_get_caps);
+
+static void pwmchip_get_default_caps(struct pwm_caps *caps)
+{
+ static const struct pwm_caps default_caps = {
+ .modes = PWM_MODE(NORMAL),
+ };
+
+ if (!caps)
+ return;
+
+ *caps = default_caps;
+}
+
+/**
* pwmchip_add_with_polarity() - register a new PWM chip
* @chip: the PWM chip to add
* @polarity: initial polarity of PWM channels
@@ -264,7 +314,8 @@ int pwmchip_add_with_polarity(struct pwm_chip *chip,
enum pwm_polarity polarity)
{
struct pwm_device *pwm;
- unsigned int i;
+ struct pwm_caps caps;
+ unsigned int i, j;
int ret;
if (!chip || !chip->dev || !chip->ops || !chip->npwm)
@@ -275,6 +326,8 @@ int pwmchip_add_with_polarity(struct pwm_chip *chip,
mutex_lock(&pwm_lock);
+ chip->get_default_caps = pwmchip_get_default_caps;
+
ret = alloc_pwms(chip->base, chip->npwm);
if (ret < 0)
goto out;
@@ -295,6 +348,16 @@ int pwmchip_add_with_polarity(struct pwm_chip *chip,
pwm->hwpwm = i;
pwm->state.polarity = polarity;
+ pwm_get_caps(chip, pwm, &caps);
+
+ /* Check if modes are supported. */
+ if (!pwm_caps_valid(caps)) {
+ ret = -EINVAL;
+ goto free;
+ }
+
+ pwm->state.mode = BIT(ffs(caps.modes) - 1);
+
if (chip->ops->get_state)
chip->ops->get_state(chip, pwm, &pwm->state);
@@ -316,6 +379,17 @@ int pwmchip_add_with_polarity(struct pwm_chip *chip,
out:
mutex_unlock(&pwm_lock);
return ret;
+
+free:
+ for (j = 0; j < i; j++) {
+ pwm = &chip->pwms[j];
+ radix_tree_delete(&pwm_tree, pwm->pwm);
+ }
+ kfree(chip->pwms);
+ chip->pwms = NULL;
+
+ mutex_unlock(&pwm_lock);
+ return ret;
}
EXPORT_SYMBOL_GPL(pwmchip_add_with_polarity);
@@ -466,10 +540,17 @@ EXPORT_SYMBOL_GPL(pwm_free);
*/
int pwm_apply_state(struct pwm_device *pwm, struct pwm_state *state)
{
+ struct pwm_caps caps;
int err;
if (!pwm || !state || !state->period ||
- state->duty_cycle > state->period)
+ state->duty_cycle > state->period ||
+ !pwm_mode_valid(state->mode))
+ return -EINVAL;
+
+ /* Check if mode is supported by PWM. */
+ pwm_get_caps(pwm->chip, pwm, &caps);
+ if (!(caps.modes & state->mode))
return -EINVAL;
if (!memcmp(state, &pwm->state, sizeof(*state)))
@@ -530,6 +611,9 @@ int pwm_apply_state(struct pwm_device *pwm, struct pwm_state *state)
pwm->state.enabled = state->enabled;
}
+
+ /* No mode support for non-atomic PWM. */
+ pwm->state.mode = state->mode;
}
return 0;
@@ -579,6 +663,8 @@ int pwm_adjust_config(struct pwm_device *pwm)
pwm_get_args(pwm, &pargs);
pwm_get_state(pwm, &state);
+ state.mode = pargs.mode;
+
/*
* If the current period is zero it means that either the PWM driver
* does not support initial state retrieval or the PWM has not yet
@@ -767,6 +853,7 @@ struct pwm_device *pwm_get(struct device *dev, const char *con_id)
unsigned int best = 0;
struct pwm_lookup *p, *chosen = NULL;
unsigned int match;
+ struct pwm_caps caps;
int err;
/* look up via DT first */
@@ -848,8 +935,10 @@ struct pwm_device *pwm_get(struct device *dev, const char *con_id)
if (IS_ERR(pwm))
return pwm;
+ pwm_get_caps(chip, pwm, &caps);
pwm->args.period = chosen->period;
pwm->args.polarity = chosen->polarity;
+ pwm->args.mode = BIT(ffs(caps.modes) - 1);
return pwm;
}
@@ -999,6 +1088,7 @@ static void pwm_dbg_show(struct pwm_chip *chip, struct seq_file *s)
seq_printf(s, " duty: %u ns", state.duty_cycle);
seq_printf(s, " polarity: %s",
state.polarity ? "inverse" : "normal");
+ seq_printf(s, " mode: %s", pwm_mode_desc(state.mode));
seq_puts(s, "\n");
}
@@ -223,11 +223,66 @@ static ssize_t capture_show(struct device *child,
return sprintf(buf, "%u %u\n", result.period, result.duty_cycle);
}
+static ssize_t mode_show(struct device *child,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct pwm_device *pwm = child_to_pwm_device(child);
+ struct pwm_state state;
+ struct pwm_caps caps;
+ int modebit, len = 0;
+
+ pwm_get_state(pwm, &state);
+ pwm_get_caps(pwm->chip, pwm, &caps);
+
+ for (modebit = PWM_MODE_NORMAL_BIT; modebit < PWM_MODE_CNT; modebit++)
+ if (caps.modes & BIT(modebit)) {
+ if (state.mode == BIT(modebit))
+ len += scnprintf(buf + len,
+ PAGE_SIZE - len, "[%s] ",
+ pwm_mode_desc(BIT(modebit)));
+ else
+ len += scnprintf(buf + len,
+ PAGE_SIZE - len, "%s ",
+ pwm_mode_desc(BIT(modebit)));
+ }
+
+ len += scnprintf(buf + len, PAGE_SIZE - len, "\n");
+
+ return len;
+}
+
+static ssize_t mode_store(struct device *child,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct pwm_export *export = child_to_pwm_export(child);
+ struct pwm_device *pwm = export->pwm;
+ struct pwm_state state;
+ int modebit, ret;
+
+ for (modebit = PWM_MODE_NORMAL_BIT; modebit < PWM_MODE_CNT; modebit++)
+ if (sysfs_streq(buf, pwm_mode_desc(BIT(modebit))))
+ break;
+
+ if (modebit == PWM_MODE_CNT)
+ return -EINVAL;
+
+ mutex_lock(&export->lock);
+ pwm_get_state(pwm, &state);
+ state.mode = BIT(modebit);
+ ret = pwm_apply_state(pwm, &state);
+ mutex_unlock(&export->lock);
+
+ return ret ? : size;
+}
+
static DEVICE_ATTR_RW(period);
static DEVICE_ATTR_RW(duty_cycle);
static DEVICE_ATTR_RW(enable);
static DEVICE_ATTR_RW(polarity);
static DEVICE_ATTR_RO(capture);
+static DEVICE_ATTR_RW(mode);
static struct attribute *pwm_attrs[] = {
&dev_attr_period.attr,
@@ -235,6 +290,7 @@ static struct attribute *pwm_attrs[] = {
&dev_attr_enable.attr,
&dev_attr_polarity.attr,
&dev_attr_capture.attr,
+ &dev_attr_mode.attr,
NULL
};
ATTRIBUTE_GROUPS(pwm);
@@ -26,9 +26,32 @@ enum pwm_polarity {
};
/**
+ * PWM modes
+ * @PWM_MODE_NORMAL_BIT: PWM has one output
+ * @PWM_MODE_COMPLEMENTARY_BIT: PWM has 2 outputs with opposite polarities
+ * @PWM_MODE_CNT: PWM modes count
+ */
+enum {
+ PWM_MODE_NORMAL_BIT,
+ PWM_MODE_COMPLEMENTARY_BIT,
+ PWM_MODE_CNT,
+};
+
+#define PWM_MODE(name) BIT(PWM_MODE_##name##_BIT)
+
+/**
+ * struct pwm_caps - PWM capabilities
+ * @modes: PWM modes
+ */
+struct pwm_caps {
+ unsigned long modes;
+};
+
+/**
* struct pwm_args - board-dependent PWM arguments
* @period: reference period
* @polarity: reference polarity
+ * @mode: reference mode
*
* This structure describes board-dependent arguments attached to a PWM
* device. These arguments are usually retrieved from the PWM lookup table or
@@ -41,6 +64,7 @@ enum pwm_polarity {
struct pwm_args {
unsigned int period;
enum pwm_polarity polarity;
+ unsigned long mode;
};
enum {
@@ -53,12 +77,14 @@ enum {
* @period: PWM period (in nanoseconds)
* @duty_cycle: PWM duty cycle (in nanoseconds)
* @polarity: PWM polarity
+ * @mode: PWM mode
* @enabled: PWM enabled status
*/
struct pwm_state {
unsigned int period;
unsigned int duty_cycle;
enum pwm_polarity polarity;
+ unsigned long mode;
bool enabled;
};
@@ -181,6 +207,7 @@ static inline void pwm_init_state(const struct pwm_device *pwm,
state->period = args.period;
state->polarity = args.polarity;
state->duty_cycle = 0;
+ state->mode = args.mode;
}
/**
@@ -254,6 +281,7 @@ pwm_set_relative_duty_cycle(struct pwm_state *state, unsigned int duty_cycle,
* @get_state: get the current PWM state. This function is only
* called once per PWM device when the PWM chip is
* registered.
+ * @get_caps: get PWM capabilities.
* @dbg_show: optional routine to show contents in debugfs
* @owner: helps prevent removal of modules exporting active PWMs
*/
@@ -272,6 +300,8 @@ struct pwm_ops {
struct pwm_state *state);
void (*get_state)(struct pwm_chip *chip, struct pwm_device *pwm,
struct pwm_state *state);
+ void (*get_caps)(struct pwm_chip *chip, struct pwm_device *pwm,
+ struct pwm_caps *caps);
#ifdef CONFIG_DEBUG_FS
void (*dbg_show)(struct pwm_chip *chip, struct seq_file *s);
#endif
@@ -287,6 +317,7 @@ struct pwm_ops {
* @npwm: number of PWMs controlled by this chip
* @pwms: array of PWM devices allocated by the framework
* @of_xlate: request a PWM device given a device tree PWM specifier
+ * @get_default_caps: get default PWM capabilities
* @of_pwm_n_cells: number of cells expected in the device tree PWM specifier
*/
struct pwm_chip {
@@ -300,6 +331,7 @@ struct pwm_chip {
struct pwm_device * (*of_xlate)(struct pwm_chip *pc,
const struct of_phandle_args *args);
+ void (*get_default_caps)(struct pwm_caps *caps);
unsigned int of_pwm_n_cells;
};
@@ -424,6 +456,37 @@ static inline void pwm_disable(struct pwm_device *pwm)
pwm_apply_state(pwm, &state);
}
+static inline bool pwm_mode_valid(unsigned long mode)
+{
+ return (mode &&
+ hweight_long(mode) == 1 &&
+ ffs(mode) - 1 < PWM_MODE_CNT);
+}
+
+static inline bool pwm_caps_valid(struct pwm_caps caps)
+{
+ unsigned int last;
+
+ if (!caps.modes)
+ return false;
+
+ last = fls(caps.modes) - 1;
+ if (last >= PWM_MODE_CNT)
+ return false;
+
+ return true;
+}
+
+static inline const char * const pwm_mode_desc(unsigned long mode)
+{
+ static const char * const modes[] = { "normal", "complementary" };
+
+ if (!pwm_mode_valid(mode))
+ return "invalid";
+
+ return modes[ffs(mode) - 1];
+}
+
/* PWM provider APIs */
int pwm_capture(struct pwm_device *pwm, struct pwm_capture *result,
unsigned long timeout);
@@ -438,6 +501,9 @@ struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip,
unsigned int index,
const char *label);
+void pwm_get_caps(struct pwm_chip *chip, struct pwm_device *pwm,
+ struct pwm_caps *caps);
+
struct pwm_device *of_pwm_xlate_with_flags(struct pwm_chip *pc,
const struct of_phandle_args *args);
@@ -498,6 +564,26 @@ static inline void pwm_disable(struct pwm_device *pwm)
{
}
+static inline bool pwm_mode_valid(unsigned long mode)
+{
+ return false;
+}
+
+static inline bool pwm_caps_valid(struct pwm_caps caps)
+{
+ return false;
+}
+
+static inline const char * const pwm_mode_desc(unsigned long mode)
+{
+ return NULL;
+}
+
+static inline void pwm_get_caps(struct pwm_chip *chip, struct pwm_device *pwm,
+ struct pwm_caps *caps)
+{
+}
+
static inline int pwm_set_chip_data(struct pwm_device *pwm, void *data)
{
return -EINVAL;
@@ -592,6 +678,7 @@ static inline void pwm_apply_args(struct pwm_device *pwm)
state.enabled = false;
state.polarity = pwm->args.polarity;
state.period = pwm->args.period;
+ state.mode = pwm->args.mode;
pwm_apply_state(pwm, &state);
}
Add basic PWM modes: normal and complementary. These modes should differentiate the single output PWM channels from two outputs PWM channels. These modes could be set as follow: 1. PWM channels with one output per channel: - normal mode 2. PWM channels with two outputs per channel: - normal mode - complementary mode Since users could use a PWM channel with two output as one output PWM channel, the PWM normal mode is allowed to be set for PWM channels with two outputs; in fact PWM normal mode should be supported by all PWMs. The PWM capabilities were implemented per PWM channel. Every PWM controller will register a function to get PWM capabilities. If this is not explicitly set by the driver a default function will be used to retrieve the the PWM capabilities (in this case the PWM capabilities will contain only PWM normal mode). This function is set in pwmchip_add_with_polarity() as a member of "struct pwm_chip". To retrieve capabilities the pwm_get_caps() function could be used. Every PWM channel will have associated a mode in the PWM state. Proper helper functions were added to get/set PWM mode. The mode could also be set from DT via flag cells. The valid DT modes could be located in include/dt-bindings/pwm/pwm.h. Only modes supported by PWM channel could be set. If nothing is specified for a PWM channel, via DT, the first available mode will be used (normally, this will be PWM normal mode). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> --- drivers/pwm/core.c | 98 ++++++++++++++++++++++++++++++++++++++++++++++++++--- drivers/pwm/sysfs.c | 56 ++++++++++++++++++++++++++++++ include/linux/pwm.h | 87 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 237 insertions(+), 4 deletions(-)