| Message ID | 1519393611-31367-1-git-send-email-amelie.delaunay@st.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Amelie, On 23/02/18 15:46, Amelie Delaunay wrote: > On some boards, especially when vbus supply requires large current, > and the charge pump on the PHY isn't enough, an external vbus power switch > may be used. > Add support for optional external vbus supply per port in ehci-platform. > > Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> > > --- > Changes in v3: > * Address Felipe Balbi comments: reduce indentation in > ehci_platform_port_power. > * Address Roger Quadros and Alan Stern comments: platforms can have one > external vbus supply per port, so add support to get as many optional > regulator as implemented ports on the host controller. > > Changes in v2: > * Address Roger Quadros comments: move regulator_enable/disable from > ehci_platform_power_on/off to ehci_platform_port_power. > --- > Documentation/devicetree/bindings/usb/usb-ehci.txt | 1 + > drivers/usb/host/ehci-platform.c | 52 +++++++++++++++++++++- > 2 files changed, 52 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt > index 3efde12..cd576db 100644 > --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt > +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt > @@ -19,6 +19,7 @@ Optional properties: > - phys : phandle + phy specifier pair > - phy-names : "usb" > - resets : phandle + reset specifier pair > + - portN_vbus-supply : phandle of regulator supplying vbus for port N > > Example (Sequoia 440EPx): > ehci@e0000300 { Sorry for not pointing this out earlier but I think patch to DT bindings should come separately (before the driver changes) with the following subject. "dt-bindings: usb: ehci: <subject>" > diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c > index b065a96..8e9f201 100644 > --- a/drivers/usb/host/ehci-platform.c > +++ b/drivers/usb/host/ehci-platform.c > @@ -29,6 +29,7 @@ > #include <linux/of.h> > #include <linux/phy/phy.h> > #include <linux/platform_device.h> > +#include <linux/regulator/consumer.h> > #include <linux/reset.h> > #include <linux/usb.h> > #include <linux/usb/hcd.h> > @@ -46,6 +47,7 @@ struct ehci_platform_priv { > struct reset_control *rsts; > struct phy **phys; > int num_phys; > + struct regulator **vbus_supplies; > bool reset_on_resume; > }; > > @@ -56,7 +58,8 @@ static int ehci_platform_reset(struct usb_hcd *hcd) > struct platform_device *pdev = to_platform_device(hcd->self.controller); > struct usb_ehci_pdata *pdata = dev_get_platdata(&pdev->dev); > struct ehci_hcd *ehci = hcd_to_ehci(hcd); > - int retval; > + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); > + int portnum, n_ports, retval; > > ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug; > > @@ -71,11 +74,57 @@ static int ehci_platform_reset(struct usb_hcd *hcd) > if (retval) > return retval; > > + n_ports = HCS_N_PORTS(ehci->hcs_params); > + priv->vbus_supplies = devm_kcalloc(&pdev->dev, n_ports, > + sizeof(struct regulator *), > + GFP_KERNEL); > + if (!priv->vbus_supplies) > + return -ENOMEM; > + > + for (portnum = 0; portnum < n_ports; portnum++) { > + struct regulator *vbus_supply; > + char id[20]; > + > + sprintf(id, "port%d_vbus", portnum); > + > + vbus_supply = devm_regulator_get_optional(&pdev->dev, id); > + if (IS_ERR(vbus_supply)) { > + retval = PTR_ERR(vbus_supply); > + if (retval == -ENODEV) > + priv->vbus_supplies[portnum] = NULL; > + else > + return retval; > + } else { > + priv->vbus_supplies[portnum] = vbus_supply; > + } > + } > + > if (pdata->no_io_watchdog) > ehci->need_io_watchdog = 0; > return 0; > } > > +static int ehci_platform_port_power(struct usb_hcd *hcd, int portnum, > + bool enable) > +{ > + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); > + int ret; > + > + if (!priv->vbus_supplies[portnum]) > + return 0; > + > + if (enable) > + ret = regulator_enable(priv->vbus_supplies[portnum]); > + else > + ret = regulator_disable(priv->vbus_supplies[portnum]); A newline could be used here. > + if (ret) > + dev_err(hcd->self.controller, > + "failed to %s vbus supply for port %d: %d\n", > + enable ? "enable" : "disable", portnum, ret); > + > + return ret; > +} > + > static int ehci_platform_power_on(struct platform_device *dev) > { > struct usb_hcd *hcd = platform_get_drvdata(dev); > @@ -134,6 +183,7 @@ static struct hc_driver __read_mostly ehci_platform_hc_driver; > static const struct ehci_driver_overrides platform_overrides __initconst = { > .reset = ehci_platform_reset, > .extra_priv_size = sizeof(struct ehci_platform_priv), > + .port_power = ehci_platform_port_power, > }; > > static struct usb_ehci_pdata ehci_platform_defaults = { > Otherwise, looks good to me. So, Reviewed-by: Roger Quadros <rogerq@ti.com>
Hi Amelie, Just a couple of drive-by coding style comments... On 23/02/18 13:46, Amelie Delaunay wrote: > On some boards, especially when vbus supply requires large current, > and the charge pump on the PHY isn't enough, an external vbus power switch > may be used. > Add support for optional external vbus supply per port in ehci-platform. > > Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> > > --- > Changes in v3: > * Address Felipe Balbi comments: reduce indentation in > ehci_platform_port_power. > * Address Roger Quadros and Alan Stern comments: platforms can have one > external vbus supply per port, so add support to get as many optional > regulator as implemented ports on the host controller. > > Changes in v2: > * Address Roger Quadros comments: move regulator_enable/disable from > ehci_platform_power_on/off to ehci_platform_port_power. > --- > Documentation/devicetree/bindings/usb/usb-ehci.txt | 1 + > drivers/usb/host/ehci-platform.c | 52 +++++++++++++++++++++- > 2 files changed, 52 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt > index 3efde12..cd576db 100644 > --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt > +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt > @@ -19,6 +19,7 @@ Optional properties: > - phys : phandle + phy specifier pair > - phy-names : "usb" > - resets : phandle + reset specifier pair > + - portN_vbus-supply : phandle of regulator supplying vbus for port N > > Example (Sequoia 440EPx): > ehci@e0000300 { > diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c > index b065a96..8e9f201 100644 > --- a/drivers/usb/host/ehci-platform.c > +++ b/drivers/usb/host/ehci-platform.c > @@ -29,6 +29,7 @@ > #include <linux/of.h> > #include <linux/phy/phy.h> > #include <linux/platform_device.h> > +#include <linux/regulator/consumer.h> > #include <linux/reset.h> > #include <linux/usb.h> > #include <linux/usb/hcd.h> > @@ -46,6 +47,7 @@ struct ehci_platform_priv { > struct reset_control *rsts; > struct phy **phys; > int num_phys; > + struct regulator **vbus_supplies; > bool reset_on_resume; > }; > > @@ -56,7 +58,8 @@ static int ehci_platform_reset(struct usb_hcd *hcd) > struct platform_device *pdev = to_platform_device(hcd->self.controller); > struct usb_ehci_pdata *pdata = dev_get_platdata(&pdev->dev); > struct ehci_hcd *ehci = hcd_to_ehci(hcd); > - int retval; > + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); > + int portnum, n_ports, retval; > > ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug; > > @@ -71,11 +74,57 @@ static int ehci_platform_reset(struct usb_hcd *hcd) > if (retval) > return retval; > > + n_ports = HCS_N_PORTS(ehci->hcs_params); > + priv->vbus_supplies = devm_kcalloc(&pdev->dev, n_ports, > + sizeof(struct regulator *), Using "sizeof(*priv->vbus_supplies)" here will prevent people sending annoying cleanup patches later. > + GFP_KERNEL); > + if (!priv->vbus_supplies) > + return -ENOMEM; > + > + for (portnum = 0; portnum < n_ports; portnum++) { > + struct regulator *vbus_supply; > + char id[20]; > + > + sprintf(id, "port%d_vbus", portnum); > + > + vbus_supply = devm_regulator_get_optional(&pdev->dev, id); > + if (IS_ERR(vbus_supply)) { > + retval = PTR_ERR(vbus_supply); > + if (retval == -ENODEV) > + priv->vbus_supplies[portnum] = NULL; The array element here hasn't yet been assigned to since kcalloc() initially zeroed it, so this is entirely redundant - you can simply make the comparison a "!=" and remove the "else" case. Robin. > + else > + return retval; > + } else { > + priv->vbus_supplies[portnum] = vbus_supply; > + } > + } > + > if (pdata->no_io_watchdog) > ehci->need_io_watchdog = 0; > return 0; > } > > +static int ehci_platform_port_power(struct usb_hcd *hcd, int portnum, > + bool enable) > +{ > + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); > + int ret; > + > + if (!priv->vbus_supplies[portnum]) > + return 0; > + > + if (enable) > + ret = regulator_enable(priv->vbus_supplies[portnum]); > + else > + ret = regulator_disable(priv->vbus_supplies[portnum]); > + if (ret) > + dev_err(hcd->self.controller, > + "failed to %s vbus supply for port %d: %d\n", > + enable ? "enable" : "disable", portnum, ret); > + > + return ret; > +} > + > static int ehci_platform_power_on(struct platform_device *dev) > { > struct usb_hcd *hcd = platform_get_drvdata(dev); > @@ -134,6 +183,7 @@ static struct hc_driver __read_mostly ehci_platform_hc_driver; > static const struct ehci_driver_overrides platform_overrides __initconst = { > .reset = ehci_platform_reset, > .extra_priv_size = sizeof(struct ehci_platform_priv), > + .port_power = ehci_platform_port_power, > }; > > static struct usb_ehci_pdata ehci_platform_defaults = { >
Hi Roger, On 02/28/2018 12:01 PM, Roger Quadros wrote: > Hi Amelie, > > On 23/02/18 15:46, Amelie Delaunay wrote: >> On some boards, especially when vbus supply requires large current, >> and the charge pump on the PHY isn't enough, an external vbus power switch >> may be used. >> Add support for optional external vbus supply per port in ehci-platform. >> >> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> >> >> --- >> Changes in v3: >> * Address Felipe Balbi comments: reduce indentation in >> ehci_platform_port_power. >> * Address Roger Quadros and Alan Stern comments: platforms can have one >> external vbus supply per port, so add support to get as many optional >> regulator as implemented ports on the host controller. >> >> Changes in v2: >> * Address Roger Quadros comments: move regulator_enable/disable from >> ehci_platform_power_on/off to ehci_platform_port_power. >> --- >> Documentation/devicetree/bindings/usb/usb-ehci.txt | 1 + >> drivers/usb/host/ehci-platform.c | 52 +++++++++++++++++++++- >> 2 files changed, 52 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt >> index 3efde12..cd576db 100644 >> --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt >> +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt >> @@ -19,6 +19,7 @@ Optional properties: >> - phys : phandle + phy specifier pair >> - phy-names : "usb" >> - resets : phandle + reset specifier pair >> + - portN_vbus-supply : phandle of regulator supplying vbus for port N >> >> Example (Sequoia 440EPx): >> ehci@e0000300 { > > Sorry for not pointing this out earlier but I think patch to DT bindings > should come separately (before the driver changes) with the following subject. > > "dt-bindings: usb: ehci: <subject>" > > Ok, I prepare a v4 with this split. Thanks! >> diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c >> index b065a96..8e9f201 100644 >> --- a/drivers/usb/host/ehci-platform.c >> +++ b/drivers/usb/host/ehci-platform.c >> @@ -29,6 +29,7 @@ >> #include <linux/of.h> >> #include <linux/phy/phy.h> >> #include <linux/platform_device.h> >> +#include <linux/regulator/consumer.h> >> #include <linux/reset.h> >> #include <linux/usb.h> >> #include <linux/usb/hcd.h> >> @@ -46,6 +47,7 @@ struct ehci_platform_priv { >> struct reset_control *rsts; >> struct phy **phys; >> int num_phys; >> + struct regulator **vbus_supplies; >> bool reset_on_resume; >> }; >> >> @@ -56,7 +58,8 @@ static int ehci_platform_reset(struct usb_hcd *hcd) >> struct platform_device *pdev = to_platform_device(hcd->self.controller); >> struct usb_ehci_pdata *pdata = dev_get_platdata(&pdev->dev); >> struct ehci_hcd *ehci = hcd_to_ehci(hcd); >> - int retval; >> + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); >> + int portnum, n_ports, retval; >> >> ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug; >> >> @@ -71,11 +74,57 @@ static int ehci_platform_reset(struct usb_hcd *hcd) >> if (retval) >> return retval; >> >> + n_ports = HCS_N_PORTS(ehci->hcs_params); >> + priv->vbus_supplies = devm_kcalloc(&pdev->dev, n_ports, >> + sizeof(struct regulator *), >> + GFP_KERNEL); >> + if (!priv->vbus_supplies) >> + return -ENOMEM; >> + >> + for (portnum = 0; portnum < n_ports; portnum++) { >> + struct regulator *vbus_supply; >> + char id[20]; >> + >> + sprintf(id, "port%d_vbus", portnum); >> + >> + vbus_supply = devm_regulator_get_optional(&pdev->dev, id); >> + if (IS_ERR(vbus_supply)) { >> + retval = PTR_ERR(vbus_supply); >> + if (retval == -ENODEV) >> + priv->vbus_supplies[portnum] = NULL; >> + else >> + return retval; >> + } else { >> + priv->vbus_supplies[portnum] = vbus_supply; >> + } >> + } >> + >> if (pdata->no_io_watchdog) >> ehci->need_io_watchdog = 0; >> return 0; >> } >> >> +static int ehci_platform_port_power(struct usb_hcd *hcd, int portnum, >> + bool enable) >> +{ >> + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); >> + int ret; >> + >> + if (!priv->vbus_supplies[portnum]) >> + return 0; >> + >> + if (enable) >> + ret = regulator_enable(priv->vbus_supplies[portnum]); >> + else >> + ret = regulator_disable(priv->vbus_supplies[portnum]); > > A newline could be used here. > Ok. >> + if (ret) >> + dev_err(hcd->self.controller, >> + "failed to %s vbus supply for port %d: %d\n", >> + enable ? "enable" : "disable", portnum, ret); >> + >> + return ret; >> +} >> + >> static int ehci_platform_power_on(struct platform_device *dev) >> { >> struct usb_hcd *hcd = platform_get_drvdata(dev); >> @@ -134,6 +183,7 @@ static struct hc_driver __read_mostly ehci_platform_hc_driver; >> static const struct ehci_driver_overrides platform_overrides __initconst = { >> .reset = ehci_platform_reset, >> .extra_priv_size = sizeof(struct ehci_platform_priv), >> + .port_power = ehci_platform_port_power, >> }; >> >> static struct usb_ehci_pdata ehci_platform_defaults = { >> > > Otherwise, looks good to me. So, > > Reviewed-by: Roger Quadros <rogerq@ti.com> > Thanks!
Hi Robin, On 02/28/2018 02:33 PM, Robin Murphy wrote: > Hi Amelie, > > Just a couple of drive-by coding style comments... > > On 23/02/18 13:46, Amelie Delaunay wrote: >> On some boards, especially when vbus supply requires large current, >> and the charge pump on the PHY isn't enough, an external vbus power switch >> may be used. >> Add support for optional external vbus supply per port in ehci-platform. >> >> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> >> >> --- >> Changes in v3: >> * Address Felipe Balbi comments: reduce indentation in >> ehci_platform_port_power. >> * Address Roger Quadros and Alan Stern comments: platforms can have one >> external vbus supply per port, so add support to get as many optional >> regulator as implemented ports on the host controller. >> >> Changes in v2: >> * Address Roger Quadros comments: move regulator_enable/disable from >> ehci_platform_power_on/off to ehci_platform_port_power. >> --- >> Documentation/devicetree/bindings/usb/usb-ehci.txt | 1 + >> drivers/usb/host/ehci-platform.c | 52 +++++++++++++++++++++- >> 2 files changed, 52 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt >> index 3efde12..cd576db 100644 >> --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt >> +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt >> @@ -19,6 +19,7 @@ Optional properties: >> - phys : phandle + phy specifier pair >> - phy-names : "usb" >> - resets : phandle + reset specifier pair >> + - portN_vbus-supply : phandle of regulator supplying vbus for port N >> >> Example (Sequoia 440EPx): >> ehci@e0000300 { >> diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c >> index b065a96..8e9f201 100644 >> --- a/drivers/usb/host/ehci-platform.c >> +++ b/drivers/usb/host/ehci-platform.c >> @@ -29,6 +29,7 @@ >> #include <linux/of.h> >> #include <linux/phy/phy.h> >> #include <linux/platform_device.h> >> +#include <linux/regulator/consumer.h> >> #include <linux/reset.h> >> #include <linux/usb.h> >> #include <linux/usb/hcd.h> >> @@ -46,6 +47,7 @@ struct ehci_platform_priv { >> struct reset_control *rsts; >> struct phy **phys; >> int num_phys; >> + struct regulator **vbus_supplies; >> bool reset_on_resume; >> }; >> >> @@ -56,7 +58,8 @@ static int ehci_platform_reset(struct usb_hcd *hcd) >> struct platform_device *pdev = to_platform_device(hcd->self.controller); >> struct usb_ehci_pdata *pdata = dev_get_platdata(&pdev->dev); >> struct ehci_hcd *ehci = hcd_to_ehci(hcd); >> - int retval; >> + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); >> + int portnum, n_ports, retval; >> >> ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug; >> >> @@ -71,11 +74,57 @@ static int ehci_platform_reset(struct usb_hcd *hcd) >> if (retval) >> return retval; >> >> + n_ports = HCS_N_PORTS(ehci->hcs_params); >> + priv->vbus_supplies = devm_kcalloc(&pdev->dev, n_ports, >> + sizeof(struct regulator *), > > Using "sizeof(*priv->vbus_supplies)" here will prevent people sending > annoying cleanup patches later. > OK, I will fix it in v4. >> + GFP_KERNEL); >> + if (!priv->vbus_supplies) >> + return -ENOMEM; >> + >> + for (portnum = 0; portnum < n_ports; portnum++) { >> + struct regulator *vbus_supply; >> + char id[20]; >> + >> + sprintf(id, "port%d_vbus", portnum); >> + >> + vbus_supply = devm_regulator_get_optional(&pdev->dev, id); >> + if (IS_ERR(vbus_supply)) { >> + retval = PTR_ERR(vbus_supply); >> + if (retval == -ENODEV) >> + priv->vbus_supplies[portnum] = NULL; > > The array element here hasn't yet been assigned to since kcalloc() > initially zeroed it, so this is entirely redundant - you can simply make > the comparison a "!=" and remove the "else" case. > > Robin. > Thanks for spotting this! Fix in v4. Amelie >> + else >> + return retval; >> + } else { >> + priv->vbus_supplies[portnum] = vbus_supply; >> + } >> + } >> + >> if (pdata->no_io_watchdog) >> ehci->need_io_watchdog = 0; >> return 0; >> } >> >> +static int ehci_platform_port_power(struct usb_hcd *hcd, int portnum, >> + bool enable) >> +{ >> + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); >> + int ret; >> + >> + if (!priv->vbus_supplies[portnum]) >> + return 0; >> + >> + if (enable) >> + ret = regulator_enable(priv->vbus_supplies[portnum]); >> + else >> + ret = regulator_disable(priv->vbus_supplies[portnum]); >> + if (ret) >> + dev_err(hcd->self.controller, >> + "failed to %s vbus supply for port %d: %d\n", >> + enable ? "enable" : "disable", portnum, ret); >> + >> + return ret; >> +} >> + >> static int ehci_platform_power_on(struct platform_device *dev) >> { >> struct usb_hcd *hcd = platform_get_drvdata(dev); >> @@ -134,6 +183,7 @@ static struct hc_driver __read_mostly ehci_platform_hc_driver; >> static const struct ehci_driver_overrides platform_overrides __initconst = { >> .reset = ehci_platform_reset, >> .extra_priv_size = sizeof(struct ehci_platform_priv), >> + .port_power = ehci_platform_port_power, >> }; >> >> static struct usb_ehci_pdata ehci_platform_defaults = { >>
diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt index 3efde12..cd576db 100644 --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt @@ -19,6 +19,7 @@ Optional properties: - phys : phandle + phy specifier pair - phy-names : "usb" - resets : phandle + reset specifier pair + - portN_vbus-supply : phandle of regulator supplying vbus for port N Example (Sequoia 440EPx): ehci@e0000300 { diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index b065a96..8e9f201 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -29,6 +29,7 @@ #include <linux/of.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> +#include <linux/regulator/consumer.h> #include <linux/reset.h> #include <linux/usb.h> #include <linux/usb/hcd.h> @@ -46,6 +47,7 @@ struct ehci_platform_priv { struct reset_control *rsts; struct phy **phys; int num_phys; + struct regulator **vbus_supplies; bool reset_on_resume; }; @@ -56,7 +58,8 @@ static int ehci_platform_reset(struct usb_hcd *hcd) struct platform_device *pdev = to_platform_device(hcd->self.controller); struct usb_ehci_pdata *pdata = dev_get_platdata(&pdev->dev); struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int retval; + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); + int portnum, n_ports, retval; ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug; @@ -71,11 +74,57 @@ static int ehci_platform_reset(struct usb_hcd *hcd) if (retval) return retval; + n_ports = HCS_N_PORTS(ehci->hcs_params); + priv->vbus_supplies = devm_kcalloc(&pdev->dev, n_ports, + sizeof(struct regulator *), + GFP_KERNEL); + if (!priv->vbus_supplies) + return -ENOMEM; + + for (portnum = 0; portnum < n_ports; portnum++) { + struct regulator *vbus_supply; + char id[20]; + + sprintf(id, "port%d_vbus", portnum); + + vbus_supply = devm_regulator_get_optional(&pdev->dev, id); + if (IS_ERR(vbus_supply)) { + retval = PTR_ERR(vbus_supply); + if (retval == -ENODEV) + priv->vbus_supplies[portnum] = NULL; + else + return retval; + } else { + priv->vbus_supplies[portnum] = vbus_supply; + } + } + if (pdata->no_io_watchdog) ehci->need_io_watchdog = 0; return 0; } +static int ehci_platform_port_power(struct usb_hcd *hcd, int portnum, + bool enable) +{ + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); + int ret; + + if (!priv->vbus_supplies[portnum]) + return 0; + + if (enable) + ret = regulator_enable(priv->vbus_supplies[portnum]); + else + ret = regulator_disable(priv->vbus_supplies[portnum]); + if (ret) + dev_err(hcd->self.controller, + "failed to %s vbus supply for port %d: %d\n", + enable ? "enable" : "disable", portnum, ret); + + return ret; +} + static int ehci_platform_power_on(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); @@ -134,6 +183,7 @@ static struct hc_driver __read_mostly ehci_platform_hc_driver; static const struct ehci_driver_overrides platform_overrides __initconst = { .reset = ehci_platform_reset, .extra_priv_size = sizeof(struct ehci_platform_priv), + .port_power = ehci_platform_port_power, }; static struct usb_ehci_pdata ehci_platform_defaults = {
On some boards, especially when vbus supply requires large current, and the charge pump on the PHY isn't enough, an external vbus power switch may be used. Add support for optional external vbus supply per port in ehci-platform. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> --- Changes in v3: * Address Felipe Balbi comments: reduce indentation in ehci_platform_port_power. * Address Roger Quadros and Alan Stern comments: platforms can have one external vbus supply per port, so add support to get as many optional regulator as implemented ports on the host controller. Changes in v2: * Address Roger Quadros comments: move regulator_enable/disable from ehci_platform_power_on/off to ehci_platform_port_power. --- Documentation/devicetree/bindings/usb/usb-ehci.txt | 1 + drivers/usb/host/ehci-platform.c | 52 +++++++++++++++++++++- 2 files changed, 52 insertions(+), 1 deletion(-)