| Message ID | 1520004397-28521-3-git-send-email-minyard@acm.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* minyard@acm.org (minyard@acm.org) wrote: > From: Corey Minyard <cminyard@mvista.com> > > The vmstate for isa_ipmi_bt was referencing into the bt structure, > instead create a bt structure separate and use that. > > The version 1 of the BT transfer was fairly broken, if a migration > occured during an IPMI operation, it is likely the migration would > be corrupted because I misunderstood the VMSTATE_VBUFFER_UINT32() > handling, I thought it handled transferring the length field, > too. So I just remove support for that. I doubt anyone is using > it at this point. > > This also removes the transfer of use_irq, since that should come > from configuration. > > Signed-off-by: Corey Minyard <cminyard@mvista.com> > Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> > --- > hw/ipmi/isa_ipmi_bt.c | 61 ++++++++++++++++++++++++++++++++++++++++----------- > 1 file changed, 48 insertions(+), 13 deletions(-) > > diff --git a/hw/ipmi/isa_ipmi_bt.c b/hw/ipmi/isa_ipmi_bt.c > index e946030..b64dce2 100644 > --- a/hw/ipmi/isa_ipmi_bt.c > +++ b/hw/ipmi/isa_ipmi_bt.c > @@ -450,22 +450,57 @@ static void isa_ipmi_bt_realize(DeviceState *dev, Error **errp) > isa_register_ioport(isadev, &iib->bt.io, iib->bt.io_base); > } > > -static const VMStateDescription vmstate_ISAIPMIBTDevice = { > - .name = TYPE_IPMI_INTERFACE, > +static int ipmi_bt_vmstate_post_load(void *opaque, int version) > +{ > + IPMIBT *ib = opaque; > + > + /* Make sure all the values are sane. */ > + if (ib->outpos >= MAX_IPMI_MSG_SIZE || ib->outlen >= MAX_IPMI_MSG_SIZE || > + ib->outpos >= ib->outlen) { > + ib->outpos = 0; > + ib->outlen = 0; > + } > + > + if (ib->inlen >= MAX_IPMI_MSG_SIZE) { > + ib->inlen = 0; > + } > + > + return 0; > +} OK, this one looks fine; I'd personally add a printf or something in the case where you're having to fix up the output/outlen just so you know; but that's OK; and since you know the device I'll leave the use_irq etc to you, so: Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> > +const VMStateDescription vmstate_IPMIBT = { > + .name = TYPE_IPMI_INTERFACE_PREFIX "bt", > .version_id = 1, > .minimum_version_id = 1, > + .post_load = ipmi_bt_vmstate_post_load, > + .fields = (VMStateField[]) { > + VMSTATE_BOOL(obf_irq_set, IPMIBT), > + VMSTATE_BOOL(atn_irq_set, IPMIBT), > + VMSTATE_BOOL(irqs_enabled, IPMIBT), > + VMSTATE_UINT32(outpos, IPMIBT), > + VMSTATE_UINT32(outlen, IPMIBT), > + VMSTATE_UINT8_ARRAY(outmsg, IPMIBT, MAX_IPMI_MSG_SIZE), > + VMSTATE_UINT32(inlen, IPMIBT), > + VMSTATE_UINT8_ARRAY(inmsg, IPMIBT, MAX_IPMI_MSG_SIZE), > + VMSTATE_UINT8(control_reg, IPMIBT), > + VMSTATE_UINT8(mask_reg, IPMIBT), > + VMSTATE_UINT8(waiting_rsp, IPMIBT), > + VMSTATE_UINT8(waiting_seq, IPMIBT), > + VMSTATE_END_OF_LIST() > + } > +}; > + > +static const VMStateDescription vmstate_ISAIPMIBTDevice = { > + .name = TYPE_IPMI_INTERFACE_PREFIX "isa-bt", > + .version_id = 2, > + .minimum_version_id = 2, > + /* > + * Version 1 had messed up the array transfer, it's not even usable > + * because it used VMSTATE_VBUFFER_UINT32, but it did not transfer > + * the buffer length, so random things would happen. > + */ > .fields = (VMStateField[]) { > - VMSTATE_BOOL(bt.obf_irq_set, ISAIPMIBTDevice), > - VMSTATE_BOOL(bt.atn_irq_set, ISAIPMIBTDevice), > - VMSTATE_BOOL(bt.use_irq, ISAIPMIBTDevice), > - VMSTATE_BOOL(bt.irqs_enabled, ISAIPMIBTDevice), > - VMSTATE_UINT32(bt.outpos, ISAIPMIBTDevice), > - VMSTATE_VBUFFER_UINT32(bt.outmsg, ISAIPMIBTDevice, 1, NULL, bt.outlen), > - VMSTATE_VBUFFER_UINT32(bt.inmsg, ISAIPMIBTDevice, 1, NULL, bt.inlen), > - VMSTATE_UINT8(bt.control_reg, ISAIPMIBTDevice), > - VMSTATE_UINT8(bt.mask_reg, ISAIPMIBTDevice), > - VMSTATE_UINT8(bt.waiting_rsp, ISAIPMIBTDevice), > - VMSTATE_UINT8(bt.waiting_seq, ISAIPMIBTDevice), > + VMSTATE_STRUCT(bt, ISAIPMIBTDevice, 1, vmstate_IPMIBT, IPMIBT), > VMSTATE_END_OF_LIST() > } > }; > -- > 2.7.4 > -- Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
diff --git a/hw/ipmi/isa_ipmi_bt.c b/hw/ipmi/isa_ipmi_bt.c index e946030..b64dce2 100644 --- a/hw/ipmi/isa_ipmi_bt.c +++ b/hw/ipmi/isa_ipmi_bt.c @@ -450,22 +450,57 @@ static void isa_ipmi_bt_realize(DeviceState *dev, Error **errp) isa_register_ioport(isadev, &iib->bt.io, iib->bt.io_base); } -static const VMStateDescription vmstate_ISAIPMIBTDevice = { - .name = TYPE_IPMI_INTERFACE, +static int ipmi_bt_vmstate_post_load(void *opaque, int version) +{ + IPMIBT *ib = opaque; + + /* Make sure all the values are sane. */ + if (ib->outpos >= MAX_IPMI_MSG_SIZE || ib->outlen >= MAX_IPMI_MSG_SIZE || + ib->outpos >= ib->outlen) { + ib->outpos = 0; + ib->outlen = 0; + } + + if (ib->inlen >= MAX_IPMI_MSG_SIZE) { + ib->inlen = 0; + } + + return 0; +} + +const VMStateDescription vmstate_IPMIBT = { + .name = TYPE_IPMI_INTERFACE_PREFIX "bt", .version_id = 1, .minimum_version_id = 1, + .post_load = ipmi_bt_vmstate_post_load, + .fields = (VMStateField[]) { + VMSTATE_BOOL(obf_irq_set, IPMIBT), + VMSTATE_BOOL(atn_irq_set, IPMIBT), + VMSTATE_BOOL(irqs_enabled, IPMIBT), + VMSTATE_UINT32(outpos, IPMIBT), + VMSTATE_UINT32(outlen, IPMIBT), + VMSTATE_UINT8_ARRAY(outmsg, IPMIBT, MAX_IPMI_MSG_SIZE), + VMSTATE_UINT32(inlen, IPMIBT), + VMSTATE_UINT8_ARRAY(inmsg, IPMIBT, MAX_IPMI_MSG_SIZE), + VMSTATE_UINT8(control_reg, IPMIBT), + VMSTATE_UINT8(mask_reg, IPMIBT), + VMSTATE_UINT8(waiting_rsp, IPMIBT), + VMSTATE_UINT8(waiting_seq, IPMIBT), + VMSTATE_END_OF_LIST() + } +}; + +static const VMStateDescription vmstate_ISAIPMIBTDevice = { + .name = TYPE_IPMI_INTERFACE_PREFIX "isa-bt", + .version_id = 2, + .minimum_version_id = 2, + /* + * Version 1 had messed up the array transfer, it's not even usable + * because it used VMSTATE_VBUFFER_UINT32, but it did not transfer + * the buffer length, so random things would happen. + */ .fields = (VMStateField[]) { - VMSTATE_BOOL(bt.obf_irq_set, ISAIPMIBTDevice), - VMSTATE_BOOL(bt.atn_irq_set, ISAIPMIBTDevice), - VMSTATE_BOOL(bt.use_irq, ISAIPMIBTDevice), - VMSTATE_BOOL(bt.irqs_enabled, ISAIPMIBTDevice), - VMSTATE_UINT32(bt.outpos, ISAIPMIBTDevice), - VMSTATE_VBUFFER_UINT32(bt.outmsg, ISAIPMIBTDevice, 1, NULL, bt.outlen), - VMSTATE_VBUFFER_UINT32(bt.inmsg, ISAIPMIBTDevice, 1, NULL, bt.inlen), - VMSTATE_UINT8(bt.control_reg, ISAIPMIBTDevice), - VMSTATE_UINT8(bt.mask_reg, ISAIPMIBTDevice), - VMSTATE_UINT8(bt.waiting_rsp, ISAIPMIBTDevice), - VMSTATE_UINT8(bt.waiting_seq, ISAIPMIBTDevice), + VMSTATE_STRUCT(bt, ISAIPMIBTDevice, 1, vmstate_IPMIBT, IPMIBT), VMSTATE_END_OF_LIST() } };