| Message ID | 20180228180215.25470-5-wei@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Feb 28, 2018 at 12:02:15PM -0600, Wei Huang wrote: > This patch adds migration test support for aarch64. The test code, which > implements the same functionality as x86, is booted as a kernel in qemu. > Here are the design choices we make for aarch64: > > * We choose this -kernel approach because aarch64 QEMU doesn't provide a > built-in fw like x86 does. So instead of relying on a boot loader, we > use -kernel approach for aarch64. > * The serial output is sent to PL011 directly. > * The physical memory base for mach-virt machine is 0x40000000. We change > the start_address and end_address for aarch64. > > In addition to providing the binary, this patch also includes the source > code and the build script in tests/migration/. So users can change the > source and/or re-compile the binary as they wish. > > Signed-off-by: Wei Huang <wei@redhat.com> > --- > tests/Makefile.include | 1 + > tests/migration-test.c | 44 +++++++++++++++++++-- > tests/migration/Makefile | 12 +++++- > tests/migration/aarch64-a-b-kernel.S | 75 ++++++++++++++++++++++++++++++++++++ > tests/migration/aarch64-a-b-kernel.h | 19 +++++++++ > tests/migration/migration-test.h | 9 +++++ > 6 files changed, 154 insertions(+), 6 deletions(-) > create mode 100644 tests/migration/aarch64-a-b-kernel.S > create mode 100644 tests/migration/aarch64-a-b-kernel.h > Reviewed-by: Andrew Jones <drjones@redhat.com>
On Wed, Feb 28, 2018 at 12:02:15PM -0600, Wei Huang wrote: > This patch adds migration test support for aarch64. The test code, which > implements the same functionality as x86, is booted as a kernel in qemu. > Here are the design choices we make for aarch64: > > * We choose this -kernel approach because aarch64 QEMU doesn't provide a > built-in fw like x86 does. So instead of relying on a boot loader, we > use -kernel approach for aarch64. > * The serial output is sent to PL011 directly. > * The physical memory base for mach-virt machine is 0x40000000. We change > the start_address and end_address for aarch64. > > In addition to providing the binary, this patch also includes the source > code and the build script in tests/migration/. So users can change the > source and/or re-compile the binary as they wish. > > Signed-off-by: Wei Huang <wei@redhat.com> > --- > tests/Makefile.include | 1 + > tests/migration-test.c | 44 +++++++++++++++++++-- > tests/migration/Makefile | 12 +++++- > tests/migration/aarch64-a-b-kernel.S | 75 ++++++++++++++++++++++++++++++++++++ > tests/migration/aarch64-a-b-kernel.h | 19 +++++++++ > tests/migration/migration-test.h | 9 +++++ > 6 files changed, 154 insertions(+), 6 deletions(-) > create mode 100644 tests/migration/aarch64-a-b-kernel.S > create mode 100644 tests/migration/aarch64-a-b-kernel.h > > diff --git a/tests/Makefile.include b/tests/Makefile.include > index 577eb573a2..538173866c 100644 > --- a/tests/Makefile.include > +++ b/tests/Makefile.include > @@ -372,6 +372,7 @@ check-qtest-arm-y += tests/sdhci-test$(EXESUF) > check-qtest-aarch64-y = tests/numa-test$(EXESUF) > check-qtest-aarch64-y += tests/sdhci-test$(EXESUF) > check-qtest-aarch64-y += tests/boot-serial-test$(EXESUF) > +check-qtest-aarch64-y += tests/migration-test$(EXESUF) > > check-qtest-microblazeel-y = $(check-qtest-microblaze-y) > > diff --git a/tests/migration-test.c b/tests/migration-test.c > index 12c04a9648..ff424330a1 100644 > --- a/tests/migration-test.c > +++ b/tests/migration-test.c > @@ -11,6 +11,7 @@ > */ > > #include "qemu/osdep.h" > +#include <sys/utsname.h> > > #include "libqtest.h" > #include "qapi/qmp/qdict.h" > @@ -81,12 +82,13 @@ static const char *tmpfs; > * repeatedly. It outputs a 'B' at a fixed rate while it's still running. > */ > #include "tests/migration/x86-a-b-bootblock.h" > +#include "tests/migration/aarch64-a-b-kernel.h" > > -static void init_bootfile_x86(const char *bootpath) > +static void init_bootfile(const char *bootpath, void *content) > { > FILE *bootfile = fopen(bootpath, "wb"); > > - g_assert_cmpint(fwrite(x86_bootsect, 512, 1, bootfile), ==, 1); > + g_assert_cmpint(fwrite(content, 512, 1, bootfile), ==, 1); > fclose(bootfile); > } > > @@ -392,7 +394,7 @@ static void test_migrate_start(QTestState **from, QTestState **to, > got_stop = false; > > if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) { > - init_bootfile_x86(bootpath); > + init_bootfile(bootpath, x86_bootsect); > cmd_src = g_strdup_printf("-machine accel=%s -m 150M" > " -name source,debug-threads=on" > " -serial file:%s/src_serial" > @@ -427,6 +429,40 @@ static void test_migrate_start(QTestState **from, QTestState **to, > > start_address = PPC_TEST_MEM_START; > end_address = PPC_TEST_MEM_END; > + } else if (strcmp(arch, "aarch64") == 0) { > + const char *cpu; > + const char *gic_ver; > + struct utsname utsname; > + > + /* kvm and tcg need different cpu and gic-version configs */ > + if (access("/dev/kvm", F_OK) == 0 && uname(&utsname) == 0 && > + strcmp(utsname.machine, "aarch64") == 0) { > + accel = "kvm"; > + cpu = "host"; > + gic_ver = "host"; > + } else { > + accel = "tcg"; > + cpu = "cortex-a57"; > + gic_ver = "2"; > + } > + > + init_bootfile(bootpath, aarch64_kernel); > + cmd_src = g_strdup_printf("-machine virt,accel=%s,gic-version=%s " > + "-name vmsource,debug-threads=on -cpu %s " > + "-m 150M -serial file:%s/src_serial " > + "-kernel %s ", > + accel, gic_ver, cpu, tmpfs, bootpath); > + cmd_dst = g_strdup_printf("-machine virt,accel=%s,gic-version=%s " > + "-name vmdest,debug-threads=on -cpu %s " > + "-m 150M -serial file:%s/dest_serial " > + "-kernel %s " > + "-incoming %s ", > + accel, gic_ver, cpu, tmpfs, bootpath, uri); I know I'm the one that pointed out the need for uname() and gic-version=host, but that was before '-cpu max' was introduced. The above if-else could now be removed and the command line changed to have '-machine virt,accel=kvm:tcg,gic-version=max -cpu max' instead. We'll end up with gic-version=3 for TCG instead of 2, but that shouldn't matter. Anyway, I won't insist on the change, as the above also works fine, but I thought I'd point out this potential '-cpu max' use here. Thanks, drew > + > + start_address = ARM_TEST_MEM_START; > + end_address = ARM_TEST_MEM_END; > + > + g_assert(sizeof(aarch64_kernel) <= ARM_TEST_MAX_KERNEL_SIZE); > } else { > g_assert_not_reached(); > } > @@ -511,7 +547,7 @@ static void test_deprecated(void) > { > QTestState *from; > > - from = qtest_start(""); > + from = qtest_start("-machine none"); > > deprecated_set_downtime(from, 0.12345); > deprecated_set_speed(from, "12345"); > diff --git a/tests/migration/Makefile b/tests/migration/Makefile > index 013b8d1f44..1324427a93 100644 > --- a/tests/migration/Makefile > +++ b/tests/migration/Makefile > @@ -16,7 +16,7 @@ override define __note > */ > endef > > -all: x86-a-b-bootblock.h > +all: x86-a-b-bootblock.h aarch64-a-b-kernel.h > # Dummy command so that make thinks it has done something > @true > > @@ -24,6 +24,7 @@ SRC_PATH=../.. > include $(SRC_PATH)/rules.mak > > x86_64_cross_prefix := $(call find-cross-prefix,x86_64) > +aarch64_cross_prefix := $(call find-cross-prefix,aarch64) > > x86-a-b-bootblock.h: x86-a-b-bootblock.S > $(x86_64_cross_prefix)gcc -m32 -march=i486 -c $< -o x86.o > @@ -32,5 +33,12 @@ x86-a-b-bootblock.h: x86-a-b-bootblock.S > echo "$$__note" > $@ > xxd -i x86.bootsect | sed -e 's/.*int.*//' >> $@ > > +aarch64-a-b-kernel.h: aarch64-a-b-kernel.S > + $(aarch64_cross_prefix)gcc -o aarch64.elf -nostdlib \ > + -Wl,--build-id=none $< > + $(aarch64_cross_prefix)objcopy -O binary aarch64.elf aarch64.kernel > + echo "$$__note" > $@ > + xxd -i aarch64.kernel | sed -e 's/.*int.*//' >> $@ > + > clean: > - rm -f *.bootsect *.boot *.o > + rm -f *.bootsect *.boot *.o *.elf *.kernel > diff --git a/tests/migration/aarch64-a-b-kernel.S b/tests/migration/aarch64-a-b-kernel.S > new file mode 100644 > index 0000000000..eec8f44f16 > --- /dev/null > +++ b/tests/migration/aarch64-a-b-kernel.S > @@ -0,0 +1,75 @@ > +# > +# Copyright (c) 2018 Red Hat, Inc. and/or its affiliates > +# > +# Author: > +# Wei Huang <wei@redhat.com> > +# > +# This work is licensed under the terms of the GNU GPL, version 2 or later. > +# See the COPYING file in the top-level directory. > +# > +# Note: Please make sure the compiler compiles the assembly code below with > +# pc-relative address. Also the branch instructions should use relative > +# addresses only. > + > +#include "migration-test.h" > + > +.section .text > + > + .globl _start > + > +_start: > + /* disable MMU to use phys mem address */ > + mrs x0, sctlr_el1 > + bic x0, x0, #(1<<0) > + msr sctlr_el1, x0 > + isb > + > + /* traverse test memory region */ > + mov x0, #ARM_TEST_MEM_START > + mov x1, #ARM_TEST_MEM_END > + > + /* output char 'A' to PL011 */ > + mov w3, 'A' > + mov x2, #ARM_MACH_VIRT_UART > + strb w3, [x2] > + > + /* clean up memory */ > + mov w3, #0 > + mov x4, x0 > +clean: > + strb w3, [x4] > + add x4, x4, #TEST_MEM_PAGE_SIZE > + cmp x4, x1 > + ble clean > + > + /* w5 keeps a counter so we can limit the output speed */ > + mov w5, #0 > + > + /* main body */ > +mainloop: > + mov x4, x0 > + > +innerloop: > + /* clean cache because el2 might still cache guest data under KVM */ > + dc civac, x4 > + > + /* increment the first byte of each page by 1 */ > + ldrb w3, [x4] > + add w3, w3, #1 > + and w3, w3, #0xff > + strb w3, [x4] > + > + add x4, x4, #TEST_MEM_PAGE_SIZE > + cmp x4, x1 > + blt innerloop > + > + add w5, w5, #1 > + and w5, w5, #0xff > + cmp w5, #0 > + bne mainloop > + > + /* output char 'B' to PL011 */ > + mov w3, 'B' > + strb w3, [x2] > + > + b mainloop > diff --git a/tests/migration/aarch64-a-b-kernel.h b/tests/migration/aarch64-a-b-kernel.h > new file mode 100644 > index 0000000000..53b44d3e99 > --- /dev/null > +++ b/tests/migration/aarch64-a-b-kernel.h > @@ -0,0 +1,19 @@ > +/* This file is automatically generated from > + * tests/migration/aarch64-a-b-kernel.S, edit that and then run > + * "make aarch64-a-b-kernel.h" inside tests/migration to update, > + * and then remember to send both in your patch submission. > + */ > +unsigned char aarch64_kernel[] = { > + 0x00, 0x10, 0x38, 0xd5, 0x00, 0xf8, 0x7f, 0x92, 0x00, 0x10, 0x18, 0xd5, > + 0xdf, 0x3f, 0x03, 0xd5, 0x00, 0x02, 0xa8, 0xd2, 0x01, 0xc8, 0xa8, 0xd2, > + 0x23, 0x08, 0x80, 0x52, 0x02, 0x20, 0xa1, 0xd2, 0x43, 0x00, 0x00, 0x39, > + 0x03, 0x00, 0x80, 0x52, 0xe4, 0x03, 0x00, 0xaa, 0x83, 0x00, 0x00, 0x39, > + 0x84, 0x04, 0x40, 0x91, 0x9f, 0x00, 0x01, 0xeb, 0xad, 0xff, 0xff, 0x54, > + 0x05, 0x00, 0x80, 0x52, 0xe4, 0x03, 0x00, 0xaa, 0x24, 0x7e, 0x0b, 0xd5, > + 0x83, 0x00, 0x40, 0x39, 0x63, 0x04, 0x00, 0x11, 0x63, 0x1c, 0x00, 0x12, > + 0x83, 0x00, 0x00, 0x39, 0x84, 0x04, 0x40, 0x91, 0x9f, 0x00, 0x01, 0xeb, > + 0x2b, 0xff, 0xff, 0x54, 0xa5, 0x04, 0x00, 0x11, 0xa5, 0x1c, 0x00, 0x12, > + 0xbf, 0x00, 0x00, 0x71, 0x81, 0xfe, 0xff, 0x54, 0x43, 0x08, 0x80, 0x52, > + 0x43, 0x00, 0x00, 0x39, 0xf1, 0xff, 0xff, 0x17 > +}; > + > diff --git a/tests/migration/migration-test.h b/tests/migration/migration-test.h > index 06c46a2fe0..a55b74c98c 100644 > --- a/tests/migration/migration-test.h > +++ b/tests/migration/migration-test.h > @@ -19,4 +19,13 @@ > #define PPC_TEST_MEM_END (100 * 1024 * 1024) > #define MIN_NVRAM_SIZE 8192 /* from spapr_nvram.c */ > > +/* ARM */ > +#define ARM_TEST_MEM_START (0x40000000 + 1 * 1024 * 1024) > +#define ARM_TEST_MEM_END (0x40000000 + 100 * 1024 * 1024) > +#define ARM_MACH_VIRT_UART 0x09000000 > +/* AArch64 kernel load address is 0x40080000, and the test memory starts at > + * 0x40100000. So the maximum allowable kernel size is 512KB. > + */ > +#define ARM_TEST_MAX_KERNEL_SIZE (512 * 1024) > + > #endif /* _TEST_MIGRATION_H_ */ > -- > 2.14.3 >
diff --git a/tests/Makefile.include b/tests/Makefile.include index 577eb573a2..538173866c 100644 --- a/tests/Makefile.include +++ b/tests/Makefile.include @@ -372,6 +372,7 @@ check-qtest-arm-y += tests/sdhci-test$(EXESUF) check-qtest-aarch64-y = tests/numa-test$(EXESUF) check-qtest-aarch64-y += tests/sdhci-test$(EXESUF) check-qtest-aarch64-y += tests/boot-serial-test$(EXESUF) +check-qtest-aarch64-y += tests/migration-test$(EXESUF) check-qtest-microblazeel-y = $(check-qtest-microblaze-y) diff --git a/tests/migration-test.c b/tests/migration-test.c index 12c04a9648..ff424330a1 100644 --- a/tests/migration-test.c +++ b/tests/migration-test.c @@ -11,6 +11,7 @@ */ #include "qemu/osdep.h" +#include <sys/utsname.h> #include "libqtest.h" #include "qapi/qmp/qdict.h" @@ -81,12 +82,13 @@ static const char *tmpfs; * repeatedly. It outputs a 'B' at a fixed rate while it's still running. */ #include "tests/migration/x86-a-b-bootblock.h" +#include "tests/migration/aarch64-a-b-kernel.h" -static void init_bootfile_x86(const char *bootpath) +static void init_bootfile(const char *bootpath, void *content) { FILE *bootfile = fopen(bootpath, "wb"); - g_assert_cmpint(fwrite(x86_bootsect, 512, 1, bootfile), ==, 1); + g_assert_cmpint(fwrite(content, 512, 1, bootfile), ==, 1); fclose(bootfile); } @@ -392,7 +394,7 @@ static void test_migrate_start(QTestState **from, QTestState **to, got_stop = false; if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) { - init_bootfile_x86(bootpath); + init_bootfile(bootpath, x86_bootsect); cmd_src = g_strdup_printf("-machine accel=%s -m 150M" " -name source,debug-threads=on" " -serial file:%s/src_serial" @@ -427,6 +429,40 @@ static void test_migrate_start(QTestState **from, QTestState **to, start_address = PPC_TEST_MEM_START; end_address = PPC_TEST_MEM_END; + } else if (strcmp(arch, "aarch64") == 0) { + const char *cpu; + const char *gic_ver; + struct utsname utsname; + + /* kvm and tcg need different cpu and gic-version configs */ + if (access("/dev/kvm", F_OK) == 0 && uname(&utsname) == 0 && + strcmp(utsname.machine, "aarch64") == 0) { + accel = "kvm"; + cpu = "host"; + gic_ver = "host"; + } else { + accel = "tcg"; + cpu = "cortex-a57"; + gic_ver = "2"; + } + + init_bootfile(bootpath, aarch64_kernel); + cmd_src = g_strdup_printf("-machine virt,accel=%s,gic-version=%s " + "-name vmsource,debug-threads=on -cpu %s " + "-m 150M -serial file:%s/src_serial " + "-kernel %s ", + accel, gic_ver, cpu, tmpfs, bootpath); + cmd_dst = g_strdup_printf("-machine virt,accel=%s,gic-version=%s " + "-name vmdest,debug-threads=on -cpu %s " + "-m 150M -serial file:%s/dest_serial " + "-kernel %s " + "-incoming %s ", + accel, gic_ver, cpu, tmpfs, bootpath, uri); + + start_address = ARM_TEST_MEM_START; + end_address = ARM_TEST_MEM_END; + + g_assert(sizeof(aarch64_kernel) <= ARM_TEST_MAX_KERNEL_SIZE); } else { g_assert_not_reached(); } @@ -511,7 +547,7 @@ static void test_deprecated(void) { QTestState *from; - from = qtest_start(""); + from = qtest_start("-machine none"); deprecated_set_downtime(from, 0.12345); deprecated_set_speed(from, "12345"); diff --git a/tests/migration/Makefile b/tests/migration/Makefile index 013b8d1f44..1324427a93 100644 --- a/tests/migration/Makefile +++ b/tests/migration/Makefile @@ -16,7 +16,7 @@ override define __note */ endef -all: x86-a-b-bootblock.h +all: x86-a-b-bootblock.h aarch64-a-b-kernel.h # Dummy command so that make thinks it has done something @true @@ -24,6 +24,7 @@ SRC_PATH=../.. include $(SRC_PATH)/rules.mak x86_64_cross_prefix := $(call find-cross-prefix,x86_64) +aarch64_cross_prefix := $(call find-cross-prefix,aarch64) x86-a-b-bootblock.h: x86-a-b-bootblock.S $(x86_64_cross_prefix)gcc -m32 -march=i486 -c $< -o x86.o @@ -32,5 +33,12 @@ x86-a-b-bootblock.h: x86-a-b-bootblock.S echo "$$__note" > $@ xxd -i x86.bootsect | sed -e 's/.*int.*//' >> $@ +aarch64-a-b-kernel.h: aarch64-a-b-kernel.S + $(aarch64_cross_prefix)gcc -o aarch64.elf -nostdlib \ + -Wl,--build-id=none $< + $(aarch64_cross_prefix)objcopy -O binary aarch64.elf aarch64.kernel + echo "$$__note" > $@ + xxd -i aarch64.kernel | sed -e 's/.*int.*//' >> $@ + clean: - rm -f *.bootsect *.boot *.o + rm -f *.bootsect *.boot *.o *.elf *.kernel diff --git a/tests/migration/aarch64-a-b-kernel.S b/tests/migration/aarch64-a-b-kernel.S new file mode 100644 index 0000000000..eec8f44f16 --- /dev/null +++ b/tests/migration/aarch64-a-b-kernel.S @@ -0,0 +1,75 @@ +# +# Copyright (c) 2018 Red Hat, Inc. and/or its affiliates +# +# Author: +# Wei Huang <wei@redhat.com> +# +# This work is licensed under the terms of the GNU GPL, version 2 or later. +# See the COPYING file in the top-level directory. +# +# Note: Please make sure the compiler compiles the assembly code below with +# pc-relative address. Also the branch instructions should use relative +# addresses only. + +#include "migration-test.h" + +.section .text + + .globl _start + +_start: + /* disable MMU to use phys mem address */ + mrs x0, sctlr_el1 + bic x0, x0, #(1<<0) + msr sctlr_el1, x0 + isb + + /* traverse test memory region */ + mov x0, #ARM_TEST_MEM_START + mov x1, #ARM_TEST_MEM_END + + /* output char 'A' to PL011 */ + mov w3, 'A' + mov x2, #ARM_MACH_VIRT_UART + strb w3, [x2] + + /* clean up memory */ + mov w3, #0 + mov x4, x0 +clean: + strb w3, [x4] + add x4, x4, #TEST_MEM_PAGE_SIZE + cmp x4, x1 + ble clean + + /* w5 keeps a counter so we can limit the output speed */ + mov w5, #0 + + /* main body */ +mainloop: + mov x4, x0 + +innerloop: + /* clean cache because el2 might still cache guest data under KVM */ + dc civac, x4 + + /* increment the first byte of each page by 1 */ + ldrb w3, [x4] + add w3, w3, #1 + and w3, w3, #0xff + strb w3, [x4] + + add x4, x4, #TEST_MEM_PAGE_SIZE + cmp x4, x1 + blt innerloop + + add w5, w5, #1 + and w5, w5, #0xff + cmp w5, #0 + bne mainloop + + /* output char 'B' to PL011 */ + mov w3, 'B' + strb w3, [x2] + + b mainloop diff --git a/tests/migration/aarch64-a-b-kernel.h b/tests/migration/aarch64-a-b-kernel.h new file mode 100644 index 0000000000..53b44d3e99 --- /dev/null +++ b/tests/migration/aarch64-a-b-kernel.h @@ -0,0 +1,19 @@ +/* This file is automatically generated from + * tests/migration/aarch64-a-b-kernel.S, edit that and then run + * "make aarch64-a-b-kernel.h" inside tests/migration to update, + * and then remember to send both in your patch submission. + */ +unsigned char aarch64_kernel[] = { + 0x00, 0x10, 0x38, 0xd5, 0x00, 0xf8, 0x7f, 0x92, 0x00, 0x10, 0x18, 0xd5, + 0xdf, 0x3f, 0x03, 0xd5, 0x00, 0x02, 0xa8, 0xd2, 0x01, 0xc8, 0xa8, 0xd2, + 0x23, 0x08, 0x80, 0x52, 0x02, 0x20, 0xa1, 0xd2, 0x43, 0x00, 0x00, 0x39, + 0x03, 0x00, 0x80, 0x52, 0xe4, 0x03, 0x00, 0xaa, 0x83, 0x00, 0x00, 0x39, + 0x84, 0x04, 0x40, 0x91, 0x9f, 0x00, 0x01, 0xeb, 0xad, 0xff, 0xff, 0x54, + 0x05, 0x00, 0x80, 0x52, 0xe4, 0x03, 0x00, 0xaa, 0x24, 0x7e, 0x0b, 0xd5, + 0x83, 0x00, 0x40, 0x39, 0x63, 0x04, 0x00, 0x11, 0x63, 0x1c, 0x00, 0x12, + 0x83, 0x00, 0x00, 0x39, 0x84, 0x04, 0x40, 0x91, 0x9f, 0x00, 0x01, 0xeb, + 0x2b, 0xff, 0xff, 0x54, 0xa5, 0x04, 0x00, 0x11, 0xa5, 0x1c, 0x00, 0x12, + 0xbf, 0x00, 0x00, 0x71, 0x81, 0xfe, 0xff, 0x54, 0x43, 0x08, 0x80, 0x52, + 0x43, 0x00, 0x00, 0x39, 0xf1, 0xff, 0xff, 0x17 +}; + diff --git a/tests/migration/migration-test.h b/tests/migration/migration-test.h index 06c46a2fe0..a55b74c98c 100644 --- a/tests/migration/migration-test.h +++ b/tests/migration/migration-test.h @@ -19,4 +19,13 @@ #define PPC_TEST_MEM_END (100 * 1024 * 1024) #define MIN_NVRAM_SIZE 8192 /* from spapr_nvram.c */ +/* ARM */ +#define ARM_TEST_MEM_START (0x40000000 + 1 * 1024 * 1024) +#define ARM_TEST_MEM_END (0x40000000 + 100 * 1024 * 1024) +#define ARM_MACH_VIRT_UART 0x09000000 +/* AArch64 kernel load address is 0x40080000, and the test memory starts at + * 0x40100000. So the maximum allowable kernel size is 512KB. + */ +#define ARM_TEST_MAX_KERNEL_SIZE (512 * 1024) + #endif /* _TEST_MIGRATION_H_ */
This patch adds migration test support for aarch64. The test code, which implements the same functionality as x86, is booted as a kernel in qemu. Here are the design choices we make for aarch64: * We choose this -kernel approach because aarch64 QEMU doesn't provide a built-in fw like x86 does. So instead of relying on a boot loader, we use -kernel approach for aarch64. * The serial output is sent to PL011 directly. * The physical memory base for mach-virt machine is 0x40000000. We change the start_address and end_address for aarch64. In addition to providing the binary, this patch also includes the source code and the build script in tests/migration/. So users can change the source and/or re-compile the binary as they wish. Signed-off-by: Wei Huang <wei@redhat.com> --- tests/Makefile.include | 1 + tests/migration-test.c | 44 +++++++++++++++++++-- tests/migration/Makefile | 12 +++++- tests/migration/aarch64-a-b-kernel.S | 75 ++++++++++++++++++++++++++++++++++++ tests/migration/aarch64-a-b-kernel.h | 19 +++++++++ tests/migration/migration-test.h | 9 +++++ 6 files changed, 154 insertions(+), 6 deletions(-) create mode 100644 tests/migration/aarch64-a-b-kernel.S create mode 100644 tests/migration/aarch64-a-b-kernel.h