| Message ID | 20180309222327.18689-21-enric.balletbo@collabora.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Saturday 10 March 2018 03:53 AM, Enric Balletbo i Serra wrote: > From: zain wang <wzz@rock-chips.com> > > There is no register named ANALOGIX_DP_PLL_CTL in Rockchip edp phy reg > list. We should use BIT_4 in ANALOGIX_DP_PD to control the pll power > instead of ANALOGIX_DP_PLL_CTL. > Reviewed-by: Archit Taneja <architt@codeaurora.org> Thanks, Archit > Cc: Douglas Anderson <dianders@chromium.org> > Signed-off-by: zain wang <wzz@rock-chips.com> > Signed-off-by: Sean Paul <seanpaul@chromium.org> > Signed-off-by: Thierry Escande <thierry.escande@collabora.com> > Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> > Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > > drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 20 ++++++++++++-------- > 1 file changed, 12 insertions(+), 8 deletions(-) > > diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c > index 7b7fd227e1f9..02ab1aaa9993 100644 > --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c > +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c > @@ -230,16 +230,20 @@ enum pll_status analogix_dp_get_pll_lock_status(struct analogix_dp_device *dp) > void analogix_dp_set_pll_power_down(struct analogix_dp_device *dp, bool enable) > { > u32 reg; > + u32 mask = DP_PLL_PD; > + u32 pd_addr = ANALOGIX_DP_PLL_CTL; > > - if (enable) { > - reg = readl(dp->reg_base + ANALOGIX_DP_PLL_CTL); > - reg |= DP_PLL_PD; > - writel(reg, dp->reg_base + ANALOGIX_DP_PLL_CTL); > - } else { > - reg = readl(dp->reg_base + ANALOGIX_DP_PLL_CTL); > - reg &= ~DP_PLL_PD; > - writel(reg, dp->reg_base + ANALOGIX_DP_PLL_CTL); > + if (dp->plat_data && is_rockchip(dp->plat_data->dev_type)) { > + pd_addr = ANALOGIX_DP_PD; > + mask = RK_PLL_PD; > } > + > + reg = readl(dp->reg_base + pd_addr); > + if (enable) > + reg |= mask; > + else > + reg &= ~mask; > + writel(reg, dp->reg_base + pd_addr); > } > > void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp, > -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c index 7b7fd227e1f9..02ab1aaa9993 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c @@ -230,16 +230,20 @@ enum pll_status analogix_dp_get_pll_lock_status(struct analogix_dp_device *dp) void analogix_dp_set_pll_power_down(struct analogix_dp_device *dp, bool enable) { u32 reg; + u32 mask = DP_PLL_PD; + u32 pd_addr = ANALOGIX_DP_PLL_CTL; - if (enable) { - reg = readl(dp->reg_base + ANALOGIX_DP_PLL_CTL); - reg |= DP_PLL_PD; - writel(reg, dp->reg_base + ANALOGIX_DP_PLL_CTL); - } else { - reg = readl(dp->reg_base + ANALOGIX_DP_PLL_CTL); - reg &= ~DP_PLL_PD; - writel(reg, dp->reg_base + ANALOGIX_DP_PLL_CTL); + if (dp->plat_data && is_rockchip(dp->plat_data->dev_type)) { + pd_addr = ANALOGIX_DP_PD; + mask = RK_PLL_PD; } + + reg = readl(dp->reg_base + pd_addr); + if (enable) + reg |= mask; + else + reg &= ~mask; + writel(reg, dp->reg_base + pd_addr); } void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,