diff mbox

drm/dp: Correctly mask DP_TRAINING_AUX_RD_INTERVAL values for DP 1.4

Message ID 1521058806-7802-1-git-send-email-matthew.s.atwood@intel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Matt Atwood March 14, 2018, 8:20 p.m. UTC
From: Matt Atwood <matthew.s.atwood@intel.com>

DP_TRAINING_AUX_RD_INTERVAL with DP 1.3 spec changed bit scheeme from 8
bits to 7 in DPCD 0x000e. The 8th bit is used to identify extended
receiver capabilities. For panels that use this new feature wait interval
would be increased by 512 ms, when spec is max 16 ms. This behavior is
described in table 2-158 of DP 1.4 spec address 0000eh.

With the introduction of DP 1.4 spec main link clock recovery was
standardized to 100 us regardless of TRAINING_AUX_RD_INTERVAL value.

To avoid breaking panels that are not spec compiant we now warn on
invalid values.

V2: commit title/message, masking all 7 bits, warn on out of spec values.
V3: commit message, make link train clock recovery follow DP 1.4 spec.
V4: style changes
V5: typo
V6: print statement revisions, DP_REV to DPCD_REV, comment correction
V7: typo

Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
---
 drivers/gpu/drm/drm_dp_helper.c | 18 ++++++++++++++----
 include/drm/drm_dp_helper.h     |  6 ++++++
 2 files changed, 20 insertions(+), 4 deletions(-)

Comments

Rodrigo Vivi March 14, 2018, 8:59 p.m. UTC | #1
On Wed, Mar 14, 2018 at 01:20:06PM -0700, matthew.s.atwood@intel.com wrote:
> From: Matt Atwood <matthew.s.atwood@intel.com>
> 
> DP_TRAINING_AUX_RD_INTERVAL with DP 1.3 spec changed bit scheeme from 8
> bits to 7 in DPCD 0x000e. The 8th bit is used to identify extended
> receiver capabilities. For panels that use this new feature wait interval
> would be increased by 512 ms, when spec is max 16 ms. This behavior is
> described in table 2-158 of DP 1.4 spec address 0000eh.
> 
> With the introduction of DP 1.4 spec main link clock recovery was
> standardized to 100 us regardless of TRAINING_AUX_RD_INTERVAL value.
> 
> To avoid breaking panels that are not spec compiant we now warn on
> invalid values.
> 
> V2: commit title/message, masking all 7 bits, warn on out of spec values.
> V3: commit message, make link train clock recovery follow DP 1.4 spec.
> V4: style changes
> V5: typo
> V6: print statement revisions, DP_REV to DPCD_REV, comment correction
> V7: typo

https://patchwork.freedesktop.org/series/39473/
Checkpatch noticed few lines like this over 80 char.

> 
> Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
> ---
>  drivers/gpu/drm/drm_dp_helper.c | 18 ++++++++++++++----
>  include/drm/drm_dp_helper.h     |  6 ++++++
>  2 files changed, 20 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
> index adf79be..793c0ff 100644
> --- a/drivers/gpu/drm/drm_dp_helper.c
> +++ b/drivers/gpu/drm/drm_dp_helper.c
> @@ -119,18 +119,28 @@ u8 drm_dp_get_adjust_request_pre_emphasis(const u8 link_status[DP_LINK_STATUS_SI
>  EXPORT_SYMBOL(drm_dp_get_adjust_request_pre_emphasis);
>  
>  void drm_dp_link_train_clock_recovery_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) {
> -	if (dpcd[DP_TRAINING_AUX_RD_INTERVAL] == 0)
> +	int rd_interval = dpcd[DP_TRAINING_AUX_RD_INTERVAL] & DP_TRAINING_AUX_RD_MASK;

	int rd_interval = dpcd[DP_TRAINING_AUX_RD_INTERVAL] &
		DP_TRAINING_AUX_RD_MASK;

> +
> +	if (rd_interval > 4)
> +		DRM_DEBUG_KMS("AUX interval %d, out of range (max 4)\n", rd_interval);


	DRM_DEBUG_KMS("AUX interval %d, out of range (max 4)\n",
		      rd_interval);

> +
> +	if (rd_interval == 0 || (dpcd[DP_DPCD_REV] >= DPCD_REV_14))
>  		udelay(100);
>  	else
> -		mdelay(dpcd[DP_TRAINING_AUX_RD_INTERVAL] * 4);
> +		mdelay(rd_interval * 4);
>  }
>  EXPORT_SYMBOL(drm_dp_link_train_clock_recovery_delay);
>  
>  void drm_dp_link_train_channel_eq_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) {
> -	if (dpcd[DP_TRAINING_AUX_RD_INTERVAL] == 0)
> +	int rd_interval = dpcd[DP_TRAINING_AUX_RD_INTERVAL] & DP_TRAINING_AUX_RD_MASK;

ditto

> +
> +	if (rd_interval > 4)
> +		DRM_DEBUG_KMS("AUX interval %d, out of range (max 4)\n", rd_interval);

ditto

> +
> +	if (rd_interval == 0)
>  		udelay(400);
>  	else
> -		mdelay(dpcd[DP_TRAINING_AUX_RD_INTERVAL] * 4);
> +		mdelay(rd_interval * 4);
>  }
>  EXPORT_SYMBOL(drm_dp_link_train_channel_eq_delay);
>  
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index da58a42..9afea9f 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -64,6 +64,11 @@
>  /* AUX CH addresses */
>  /* DPCD */
>  #define DP_DPCD_REV                         0x000
> +# define DPCD_REV_10                        0x10
> +# define DPCD_REV_11                        0x11
> +# define DPCD_REV_12                        0x12
> +# define DPCD_REV_13                        0x13
> +# define DPCD_REV_14                        0x14

DP_DPCD_REV_ to match the reg name

>  
>  #define DP_MAX_LINK_RATE                    0x001
>  
> @@ -118,6 +123,7 @@
>  # define DP_DPCD_DISPLAY_CONTROL_CAPABLE     (1 << 3) /* edp v1.2 or higher */
>  
>  #define DP_TRAINING_AUX_RD_INTERVAL         0x00e   /* XXX 1.2? */
> +# define DP_TRAINING_AUX_RD_MASK            0x7F    /* XXX 1.2 */

maybe add "?" to be in sync with the reg offset?

>  
>  #define DP_ADAPTER_CAP			    0x00f   /* 1.2 */
>  # define DP_FORCE_LOAD_SENSE_CAP	    (1 << 0)
> -- 
> 2.7.4
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
diff mbox

Patch

diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index adf79be..793c0ff 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -119,18 +119,28 @@  u8 drm_dp_get_adjust_request_pre_emphasis(const u8 link_status[DP_LINK_STATUS_SI
 EXPORT_SYMBOL(drm_dp_get_adjust_request_pre_emphasis);
 
 void drm_dp_link_train_clock_recovery_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) {
-	if (dpcd[DP_TRAINING_AUX_RD_INTERVAL] == 0)
+	int rd_interval = dpcd[DP_TRAINING_AUX_RD_INTERVAL] & DP_TRAINING_AUX_RD_MASK;
+
+	if (rd_interval > 4)
+		DRM_DEBUG_KMS("AUX interval %d, out of range (max 4)\n", rd_interval);
+
+	if (rd_interval == 0 || (dpcd[DP_DPCD_REV] >= DPCD_REV_14))
 		udelay(100);
 	else
-		mdelay(dpcd[DP_TRAINING_AUX_RD_INTERVAL] * 4);
+		mdelay(rd_interval * 4);
 }
 EXPORT_SYMBOL(drm_dp_link_train_clock_recovery_delay);
 
 void drm_dp_link_train_channel_eq_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) {
-	if (dpcd[DP_TRAINING_AUX_RD_INTERVAL] == 0)
+	int rd_interval = dpcd[DP_TRAINING_AUX_RD_INTERVAL] & DP_TRAINING_AUX_RD_MASK;
+
+	if (rd_interval > 4)
+		DRM_DEBUG_KMS("AUX interval %d, out of range (max 4)\n", rd_interval);
+
+	if (rd_interval == 0)
 		udelay(400);
 	else
-		mdelay(dpcd[DP_TRAINING_AUX_RD_INTERVAL] * 4);
+		mdelay(rd_interval * 4);
 }
 EXPORT_SYMBOL(drm_dp_link_train_channel_eq_delay);
 
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index da58a42..9afea9f 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -64,6 +64,11 @@ 
 /* AUX CH addresses */
 /* DPCD */
 #define DP_DPCD_REV                         0x000
+# define DPCD_REV_10                        0x10
+# define DPCD_REV_11                        0x11
+# define DPCD_REV_12                        0x12
+# define DPCD_REV_13                        0x13
+# define DPCD_REV_14                        0x14
 
 #define DP_MAX_LINK_RATE                    0x001
 
@@ -118,6 +123,7 @@ 
 # define DP_DPCD_DISPLAY_CONTROL_CAPABLE     (1 << 3) /* edp v1.2 or higher */
 
 #define DP_TRAINING_AUX_RD_INTERVAL         0x00e   /* XXX 1.2? */
+# define DP_TRAINING_AUX_RD_MASK            0x7F    /* XXX 1.2 */
 
 #define DP_ADAPTER_CAP			    0x00f   /* 1.2 */
 # define DP_FORCE_LOAD_SENSE_CAP	    (1 << 0)