[usb-next,v10,3/8] usb: core: add a wrapper for the USB PHYs on the HCD

+some TI folks

Hi Martin,

On 18/02/18 20:44, Martin Blumenstingl wrote:
> Many SoC platforms have separate devices for the USB PHY which are
> registered through the generic PHY framework. These PHYs have to be
> enabled to make the USB controller actually work. They also have to be
> disabled again on shutdown/suspend.
> 
> Currently (at least) the following HCI platform drivers are using custom
> code to obtain all PHYs via devicetree for the roothub/controller and
> disable/enable them when required:
> - ehci-platform.c has ehci_platform_power_{on,off}
> - xhci-mtk.c has xhci_mtk_phy_{init,exit,power_on,power_off}
> - ohci-platform.c has ohci_platform_power_{on,off}
> 
> With this new wrapper the USB PHYs can be specified directly in the
> USB controller's devicetree node (just like on the drivers listed
> above). This allows SoCs like the Amlogic Meson GXL family to operate
> correctly once this is wired up correctly. These SoCs use a dwc3
> controller and require all USB PHYs to be initialized (if one of the USB
> PHYs it not initialized then none of USB port works at all).
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Tested-by: Yixun Lan <yixun.lan@amlogic.com>
> Cc: Neil Armstrong <narmstrong@baylibre.com>
> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>

This patch is breaking low power cases on TI SoCs when USB is in host mode.
I'll explain why below.

> ---
>  drivers/usb/core/Makefile |   2 +-
>  drivers/usb/core/phy.c    | 158 ++++++++++++++++++++++++++++++++++++++++++++++
>  drivers/usb/core/phy.h    |   7 ++
>  3 files changed, 166 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/usb/core/phy.c
>  create mode 100644 drivers/usb/core/phy.h
> 
> diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile
> index 92c9cefb4317..18e874b0441e 100644
> --- a/drivers/usb/core/Makefile
> +++ b/drivers/usb/core/Makefile
> @@ -6,7 +6,7 @@
>  usbcore-y := usb.o hub.o hcd.o urb.o message.o driver.o
>  usbcore-y += config.o file.o buffer.o sysfs.o endpoint.o
>  usbcore-y += devio.o notify.o generic.o quirks.o devices.o
> -usbcore-y += port.o
> +usbcore-y += phy.o port.o
>  
>  usbcore-$(CONFIG_OF)		+= of.o
>  usbcore-$(CONFIG_USB_PCI)		+= hcd-pci.o
> diff --git a/drivers/usb/core/phy.c b/drivers/usb/core/phy.c
> new file mode 100644
> index 000000000000..09b7c43c0ea4
> --- /dev/null
> +++ b/drivers/usb/core/phy.c
> @@ -0,0 +1,158 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * A wrapper for multiple PHYs which passes all phy_* function calls to
> + * multiple (actual) PHY devices. This is comes handy when initializing
> + * all PHYs on a HCD and to keep them all in the same state.
> + *
> + * Copyright (C) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> + */
> +
> +#include <linux/device.h>
> +#include <linux/list.h>
> +#include <linux/phy/phy.h>
> +#include <linux/of.h>
> +
> +#include "phy.h"
> +
> +struct usb_phy_roothub {
> +	struct phy		*phy;
> +	struct list_head	list;
> +};
> +
> +static struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev)
> +{
> +	struct usb_phy_roothub *roothub_entry;
> +
> +	roothub_entry = devm_kzalloc(dev, sizeof(*roothub_entry), GFP_KERNEL);
> +	if (!roothub_entry)
> +		return ERR_PTR(-ENOMEM);
> +
> +	INIT_LIST_HEAD(&roothub_entry->list);
> +
> +	return roothub_entry;
> +}
> +
> +static int usb_phy_roothub_add_phy(struct device *dev, int index,
> +				   struct list_head *list)
> +{
> +	struct usb_phy_roothub *roothub_entry;
> +	struct phy *phy = devm_of_phy_get_by_index(dev, dev->of_node, index);
> +
> +	if (IS_ERR_OR_NULL(phy)) {
> +		if (!phy || PTR_ERR(phy) == -ENODEV)
> +			return 0;
> +		else
> +			return PTR_ERR(phy);
> +	}
> +
> +	roothub_entry = usb_phy_roothub_alloc(dev);
> +	if (IS_ERR(roothub_entry))
> +		return PTR_ERR(roothub_entry);
> +
> +	roothub_entry->phy = phy;
> +
> +	list_add_tail(&roothub_entry->list, list);
> +
> +	return 0;
> +}
> +
> +struct usb_phy_roothub *usb_phy_roothub_init(struct device *dev)
> +{
> +	struct usb_phy_roothub *phy_roothub;
> +	struct usb_phy_roothub *roothub_entry;
> +	struct list_head *head;
> +	int i, num_phys, err;
> +
> +	num_phys = of_count_phandle_with_args(dev->of_node, "phys",
> +					      "#phy-cells");
> +	if (num_phys <= 0)
> +		return NULL;
> +
> +	phy_roothub = usb_phy_roothub_alloc(dev);
> +	if (IS_ERR(phy_roothub))
> +		return phy_roothub;
> +
> +	for (i = 0; i < num_phys; i++) {
> +		err = usb_phy_roothub_add_phy(dev, i, &phy_roothub->list);
> +		if (err)
> +			goto err_out;
> +	}
> +
> +	head = &phy_roothub->list;
> +
> +	list_for_each_entry(roothub_entry, head, list) {
> +		err = phy_init(roothub_entry->phy);

The phy_init() function actually enables the PHY clocks.
It should be moved to the usb_phy_roothub_exit() routine just before calling phy_power_on().

> +		if (err)
> +			goto err_exit_phys;
> +	}
> +
> +	return phy_roothub;
> +
> +err_exit_phys:
> +	list_for_each_entry_continue_reverse(roothub_entry, head, list)
> +		phy_exit(roothub_entry->phy);
> +
> +err_out:
> +	return ERR_PTR(err);
> +}
> +EXPORT_SYMBOL_GPL(usb_phy_roothub_init);
> +
> +int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub)
> +{
> +	struct usb_phy_roothub *roothub_entry;
> +	struct list_head *head;
> +	int err, ret = 0;
> +
> +	if (!phy_roothub)
> +		return 0;
> +
> +	head = &phy_roothub->list;
> +
> +	list_for_each_entry(roothub_entry, head, list) {
> +		err = phy_exit(roothub_entry->phy);
> +		if (err)
> +			ret = ret;
> +	}

phy_exit() should be moved to usb_phy_roothub_poweroff() just after calling phy_power_off().

With that there is nothing else being done here. Shouldn't we be doing the equivalent of
usb_phy_roothub_del_phy() and usb_phy_roothub_free() here?

> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(usb_phy_roothub_exit);
> +
> +int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub)
> +{
> +	struct usb_phy_roothub *roothub_entry;
> +	struct list_head *head;
> +	int err;
> +
> +	if (!phy_roothub)
> +		return 0;
> +
> +	head = &phy_roothub->list;
> +
> +	list_for_each_entry(roothub_entry, head, list) {
> +		err = phy_power_on(roothub_entry->phy);
> +		if (err)
> +			goto err_out;
> +	}
> +
> +	return 0;
> +
> +err_out:
> +	list_for_each_entry_continue_reverse(roothub_entry, head, list)
> +		phy_power_off(roothub_entry->phy);
> +
> +	return err;
> +}
> +EXPORT_SYMBOL_GPL(usb_phy_roothub_power_on);
> +
> +void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub)
> +{
> +	struct usb_phy_roothub *roothub_entry;
> +
> +	if (!phy_roothub)
> +		return;
> +
> +	list_for_each_entry_reverse(roothub_entry, &phy_roothub->list, list)
> +		phy_power_off(roothub_entry->phy);

Not doing the phy_exit() here leaves the clocks enabled on our SoC and
we're no longer able to reach low power states on system suspend.

> +}
> +EXPORT_SYMBOL_GPL(usb_phy_roothub_power_off);
> diff --git a/drivers/usb/core/phy.h b/drivers/usb/core/phy.h
> new file mode 100644
> index 000000000000..6fde59bfbff8
> --- /dev/null
> +++ b/drivers/usb/core/phy.h
> @@ -0,0 +1,7 @@
> +struct usb_phy_roothub;
> +
> +struct usb_phy_roothub *usb_phy_roothub_init(struct device *dev);
> +int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub);
> +
> +int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub);
> +void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub);
> 

The following patch fixes the issue for me. Let me know what you think and I can post it officially.

[usb-next,v10,3/8] usb: core: add a wrapper for the USB PHYs on the HCD

Commit Message

Comments

Patch