Message ID | 20180308133331.19464-3-niklas.cassel@axis.com (mailing list archive) |
---|---|
State | New, archived |
Delegated to: | Bjorn Helgaas |
Headers | show |
Hi Niklas, On Thursday 08 March 2018 07:03 PM, Niklas Cassel wrote: > Since a 64-bit BAR consists of a BAR pair, we need to write to both > BARs in the BAR pair to setup the BAR properly. > > Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> > --- > drivers/pci/dwc/pcie-designware-ep.c | 11 +++++++++-- > 1 file changed, 9 insertions(+), 2 deletions(-) > > diff --git a/drivers/pci/dwc/pcie-designware-ep.c b/drivers/pci/dwc/pcie-designware-ep.c > index 9236b998327f..946bbdf53c4d 100644 > --- a/drivers/pci/dwc/pcie-designware-ep.c > +++ b/drivers/pci/dwc/pcie-designware-ep.c > @@ -136,8 +136,15 @@ static int dw_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no, > return ret; > > dw_pcie_dbi_ro_wr_en(pci); > - dw_pcie_writel_dbi2(pci, reg, size - 1); > - dw_pcie_writel_dbi(pci, reg, flags); > + if (flags & PCI_BASE_ADDRESS_MEM_TYPE_64) { > + dw_pcie_writel_dbi2(pci, reg, lower_32_bits(size - 1)); > + dw_pcie_writel_dbi(pci, reg, flags); > + dw_pcie_writel_dbi2(pci, reg + 4, upper_32_bits(size - 1)); > + dw_pcie_writel_dbi(pci, reg + 4, 0); I think we should check in pci_epc_set_bar to make sure BAR_5 cannot have PCI_BASE_ADDRESS_MEM_TYPE_64 flag set as this might lead undesired result. Thanks Kishon
diff --git a/drivers/pci/dwc/pcie-designware-ep.c b/drivers/pci/dwc/pcie-designware-ep.c index 9236b998327f..946bbdf53c4d 100644 --- a/drivers/pci/dwc/pcie-designware-ep.c +++ b/drivers/pci/dwc/pcie-designware-ep.c @@ -136,8 +136,15 @@ static int dw_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no, return ret; dw_pcie_dbi_ro_wr_en(pci); - dw_pcie_writel_dbi2(pci, reg, size - 1); - dw_pcie_writel_dbi(pci, reg, flags); + if (flags & PCI_BASE_ADDRESS_MEM_TYPE_64) { + dw_pcie_writel_dbi2(pci, reg, lower_32_bits(size - 1)); + dw_pcie_writel_dbi(pci, reg, flags); + dw_pcie_writel_dbi2(pci, reg + 4, upper_32_bits(size - 1)); + dw_pcie_writel_dbi(pci, reg + 4, 0); + } else { + dw_pcie_writel_dbi2(pci, reg, size - 1); + dw_pcie_writel_dbi(pci, reg, flags); + } dw_pcie_dbi_ro_wr_dis(pci); return 0;
Since a 64-bit BAR consists of a BAR pair, we need to write to both BARs in the BAR pair to setup the BAR properly. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> --- drivers/pci/dwc/pcie-designware-ep.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)