diff mbox

[v17,04/10] PCI: Apply the new generic I/O management on PCI IO hosts

Message ID 1521051359-34473-5-git-send-email-john.garry@huawei.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

John Garry March 14, 2018, 6:15 p.m. UTC 
From: Zhichang Yuan <yuanzhichang@hisilicon.com>

After introducing the new generic I/O space management(Logical PIO), the
original PCI MMIO relevant helpers need to be updated based on the new
interfaces defined in logical PIO.
This patch adapts the corresponding code to match the changes introduced
by logical PIO.

Signed-off-by: Zhichang Yuan <yuanzhichang@hisilicon.com>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>        #earlier draft
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
---
 drivers/pci/pci.c        | 92 +++++++++---------------------------------------
 include/asm-generic/io.h |  2 +-
 2 files changed, 18 insertions(+), 76 deletions(-)

Comments

Thierry Reding April 3, 2018, 1:45 p.m. UTC | #1 
On Thu, Mar 15, 2018 at 02:15:53AM +0800, John Garry wrote:
> From: Zhichang Yuan <yuanzhichang@hisilicon.com>
> 
> After introducing the new generic I/O space management(Logical PIO), the
> original PCI MMIO relevant helpers need to be updated based on the new
> interfaces defined in logical PIO.
> This patch adapts the corresponding code to match the changes introduced
> by logical PIO.
> 
> Signed-off-by: Zhichang Yuan <yuanzhichang@hisilicon.com>
> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>        #earlier draft
> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Tested-by: dann frazier <dann.frazier@canonical.com>
> ---
>  drivers/pci/pci.c        | 92 +++++++++---------------------------------------
>  include/asm-generic/io.h |  2 +-
>  2 files changed, 18 insertions(+), 76 deletions(-)

Today's linux-next regresses on NFS boot for Jetson TK1. I was able to
bisect it to this commit. I'll comment below for where I think this is
buggy.

> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 3f30b7d..09c2490 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -22,6 +22,7 @@
>  #include <linux/spinlock.h>
>  #include <linux/string.h>
>  #include <linux/log2.h>
> +#include <linux/logic_pio.h>
>  #include <linux/pci-aspm.h>
>  #include <linux/pm_wakeup.h>
>  #include <linux/interrupt.h>
> @@ -3436,17 +3437,6 @@ int pci_request_regions_exclusive(struct pci_dev *pdev, const char *res_name)
>  }
>  EXPORT_SYMBOL(pci_request_regions_exclusive);
>  
> -#ifdef PCI_IOBASE
> -struct io_range {
> -	struct list_head list;
> -	phys_addr_t start;
> -	resource_size_t size;
> -};
> -
> -static LIST_HEAD(io_range_list);
> -static DEFINE_SPINLOCK(io_range_lock);
> -#endif
> -
>  /*
>   * Record the PCI IO range (expressed as CPU physical address + size).
>   * Return a negative value if an error has occured, zero otherwise
> @@ -3454,51 +3444,28 @@ struct io_range {
>  int pci_register_io_range(struct fwnode_handle *fwnode, phys_addr_t addr,
>  			resource_size_t	size)
>  {
> -	int err = 0;
> -
> +	int ret = 0;
>  #ifdef PCI_IOBASE
> -	struct io_range *range;
> -	resource_size_t allocated_size = 0;
> -
> -	/* check if the range hasn't been previously recorded */
> -	spin_lock(&io_range_lock);
> -	list_for_each_entry(range, &io_range_list, list) {
> -		if (addr >= range->start && addr + size <= range->start + size) {
> -			/* range already registered, bail out */
> -			goto end_register;
> -		}
> -		allocated_size += range->size;
> -	}
> +	struct logic_pio_hwaddr *range;
>  
> -	/* range not registed yet, check for available space */
> -	if (allocated_size + size - 1 > IO_SPACE_LIMIT) {
> -		/* if it's too big check if 64K space can be reserved */
> -		if (allocated_size + SZ_64K - 1 > IO_SPACE_LIMIT) {
> -			err = -E2BIG;
> -			goto end_register;
> -		}
> -
> -		size = SZ_64K;
> -		pr_warn("Requested IO range too big, new size set to 64K\n");
> -	}
> +	if (!size || addr + size < addr)
> +		return -EINVAL;
>  
> -	/* add the range to the list */
>  	range = kzalloc(sizeof(*range), GFP_ATOMIC);
> -	if (!range) {
> -		err = -ENOMEM;
> -		goto end_register;
> -	}
> +	if (!range)
> +		return -ENOMEM;
>  
> -	range->start = addr;
> +	range->fwnode = fwnode;
>  	range->size = size;
> +	range->hw_start = addr;
> +	range->flags = LOGIC_PIO_CPU_MMIO;
>  
> -	list_add_tail(&range->list, &io_range_list);
> -
> -end_register:
> -	spin_unlock(&io_range_lock);
> +	ret = logic_pio_register_range(range);

This ends up returning -EFAULT at some point, causing the driver's
(pci-tegra.c) ->probe() to fail.

Let me comment on a prior patch to pinpoint what exactly goes wrong.

Thierry
John Garry April 3, 2018, 2:02 p.m. UTC | #2 
On 03/04/2018 14:45, Thierry Reding wrote:
> On Thu, Mar 15, 2018 at 02:15:53AM +0800, John Garry wrote:
>> From: Zhichang Yuan <yuanzhichang@hisilicon.com>
>>
>> After introducing the new generic I/O space management(Logical PIO), the
>> original PCI MMIO relevant helpers need to be updated based on the new
>> interfaces defined in logical PIO.
>> This patch adapts the corresponding code to match the changes introduced
>> by logical PIO.
>>
>> Signed-off-by: Zhichang Yuan <yuanzhichang@hisilicon.com>
>> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
>> Signed-off-by: Arnd Bergmann <arnd@arndb.de>        #earlier draft
>> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
>> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
>> Tested-by: dann frazier <dann.frazier@canonical.com>
>> ---
>>  drivers/pci/pci.c        | 92 +++++++++---------------------------------------
>>  include/asm-generic/io.h |  2 +-
>>  2 files changed, 18 insertions(+), 76 deletions(-)
>
> Today's linux-next regresses on NFS boot for Jetson TK1. I was able to
> bisect it to this commit. I'll comment below for where I think this is
> buggy.
>
>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>> index 3f30b7d..09c2490 100644
>> --- a/drivers/pci/pci.c
>> +++ b/drivers/pci/pci.c
>> @@ -22,6 +22,7 @@
>>  #include <linux/spinlock.h>
>>  #include <linux/string.h>
>>  #include <linux/log2.h>
>> +#include <linux/logic_pio.h>
>>  #include <linux/pci-aspm.h>
>>  #include <linux/pm_wakeup.h>
>>  #include <linux/interrupt.h>
>> @@ -3436,17 +3437,6 @@ int pci_request_regions_exclusive(struct pci_dev *pdev, const char *res_name)
>>  }
>>  EXPORT_SYMBOL(pci_request_regions_exclusive);
>>
>> -#ifdef PCI_IOBASE
>> -struct io_range {
>> -	struct list_head list;
>> -	phys_addr_t start;
>> -	resource_size_t size;
>> -};
>> -
>> -static LIST_HEAD(io_range_list);
>> -static DEFINE_SPINLOCK(io_range_lock);
>> -#endif
>> -
>>  /*
>>   * Record the PCI IO range (expressed as CPU physical address + size).
>>   * Return a negative value if an error has occured, zero otherwise
>> @@ -3454,51 +3444,28 @@ struct io_range {
>>  int pci_register_io_range(struct fwnode_handle *fwnode, phys_addr_t addr,
>>  			resource_size_t	size)
>>  {
>> -	int err = 0;
>> -
>> +	int ret = 0;
>>  #ifdef PCI_IOBASE
>> -	struct io_range *range;
>> -	resource_size_t allocated_size = 0;
>> -
>> -	/* check if the range hasn't been previously recorded */
>> -	spin_lock(&io_range_lock);
>> -	list_for_each_entry(range, &io_range_list, list) {
>> -		if (addr >= range->start && addr + size <= range->start + size) {
>> -			/* range already registered, bail out */
>> -			goto end_register;
>> -		}
>> -		allocated_size += range->size;
>> -	}
>> +	struct logic_pio_hwaddr *range;
>>
>> -	/* range not registed yet, check for available space */
>> -	if (allocated_size + size - 1 > IO_SPACE_LIMIT) {
>> -		/* if it's too big check if 64K space can be reserved */
>> -		if (allocated_size + SZ_64K - 1 > IO_SPACE_LIMIT) {
>> -			err = -E2BIG;
>> -			goto end_register;
>> -		}
>> -
>> -		size = SZ_64K;
>> -		pr_warn("Requested IO range too big, new size set to 64K\n");
>> -	}
>> +	if (!size || addr + size < addr)
>> +		return -EINVAL;
>>
>> -	/* add the range to the list */
>>  	range = kzalloc(sizeof(*range), GFP_ATOMIC);
>> -	if (!range) {
>> -		err = -ENOMEM;
>> -		goto end_register;
>> -	}
>> +	if (!range)
>> +		return -ENOMEM;
>>
>> -	range->start = addr;
>> +	range->fwnode = fwnode;
>>  	range->size = size;
>> +	range->hw_start = addr;
>> +	range->flags = LOGIC_PIO_CPU_MMIO;
>>
>> -	list_add_tail(&range->list, &io_range_list);
>> -
>> -end_register:
>> -	spin_unlock(&io_range_lock);
>> +	ret = logic_pio_register_range(range);
>
> This ends up returning -EFAULT at some point, causing the driver's
> (pci-tegra.c) ->probe() to fail.
>
> Let me comment on a prior patch to pinpoint what exactly goes wrong.

Hi Thierry,

Thanks for the notification. So this patch is where we transistion from 
using the PCI internal pio management to the new framework.

I already had tried today's linux-next with hisi PCI host controller in 
pcie-hisi.c on an arm64 system, and it looked ok.

Function logic_pio_register_range() returns fault when we try to 
register the same range twice or there is an overlap in ranges.

I wonder if is there something special about this host controller driver 
in terms of IO space management. And what arch/system was the host?

John

>
> Thierry
>


--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 3f30b7d..09c2490 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -22,6 +22,7 @@ 
 #include <linux/spinlock.h>
 #include <linux/string.h>
 #include <linux/log2.h>
+#include <linux/logic_pio.h>
 #include <linux/pci-aspm.h>
 #include <linux/pm_wakeup.h>
 #include <linux/interrupt.h>
@@ -3436,17 +3437,6 @@  int pci_request_regions_exclusive(struct pci_dev *pdev, const char *res_name)
 }
 EXPORT_SYMBOL(pci_request_regions_exclusive);
 
-#ifdef PCI_IOBASE
-struct io_range {
-	struct list_head list;
-	phys_addr_t start;
-	resource_size_t size;
-};
-
-static LIST_HEAD(io_range_list);
-static DEFINE_SPINLOCK(io_range_lock);
-#endif
-
 /*
  * Record the PCI IO range (expressed as CPU physical address + size).
  * Return a negative value if an error has occured, zero otherwise
@@ -3454,51 +3444,28 @@  struct io_range {
 int pci_register_io_range(struct fwnode_handle *fwnode, phys_addr_t addr,
 			resource_size_t	size)
 {
-	int err = 0;
-
+	int ret = 0;
 #ifdef PCI_IOBASE
-	struct io_range *range;
-	resource_size_t allocated_size = 0;
-
-	/* check if the range hasn't been previously recorded */
-	spin_lock(&io_range_lock);
-	list_for_each_entry(range, &io_range_list, list) {
-		if (addr >= range->start && addr + size <= range->start + size) {
-			/* range already registered, bail out */
-			goto end_register;
-		}
-		allocated_size += range->size;
-	}
+	struct logic_pio_hwaddr *range;
 
-	/* range not registed yet, check for available space */
-	if (allocated_size + size - 1 > IO_SPACE_LIMIT) {
-		/* if it's too big check if 64K space can be reserved */
-		if (allocated_size + SZ_64K - 1 > IO_SPACE_LIMIT) {
-			err = -E2BIG;
-			goto end_register;
-		}
-
-		size = SZ_64K;
-		pr_warn("Requested IO range too big, new size set to 64K\n");
-	}
+	if (!size || addr + size < addr)
+		return -EINVAL;
 
-	/* add the range to the list */
 	range = kzalloc(sizeof(*range), GFP_ATOMIC);
-	if (!range) {
-		err = -ENOMEM;
-		goto end_register;
-	}
+	if (!range)
+		return -ENOMEM;
 
-	range->start = addr;
+	range->fwnode = fwnode;
 	range->size = size;
+	range->hw_start = addr;
+	range->flags = LOGIC_PIO_CPU_MMIO;
 
-	list_add_tail(&range->list, &io_range_list);
-
-end_register:
-	spin_unlock(&io_range_lock);
+	ret = logic_pio_register_range(range);
+	if (ret)
+		kfree(range);
 #endif
 
-	return err;
+	return ret;
 }
 
 phys_addr_t pci_pio_to_address(unsigned long pio)
@@ -3506,21 +3473,10 @@  phys_addr_t pci_pio_to_address(unsigned long pio)
 	phys_addr_t address = (phys_addr_t)OF_BAD_ADDR;
 
 #ifdef PCI_IOBASE
-	struct io_range *range;
-	resource_size_t allocated_size = 0;
-
-	if (pio > IO_SPACE_LIMIT)
+	if (pio >= MMIO_UPPER_LIMIT)
 		return address;
 
-	spin_lock(&io_range_lock);
-	list_for_each_entry(range, &io_range_list, list) {
-		if (pio >= allocated_size && pio < allocated_size + range->size) {
-			address = range->start + pio - allocated_size;
-			break;
-		}
-		allocated_size += range->size;
-	}
-	spin_unlock(&io_range_lock);
+	address = logic_pio_to_hwaddr(pio);
 #endif
 
 	return address;
@@ -3529,21 +3485,7 @@  phys_addr_t pci_pio_to_address(unsigned long pio)
 unsigned long __weak pci_address_to_pio(phys_addr_t address)
 {
 #ifdef PCI_IOBASE
-	struct io_range *res;
-	resource_size_t offset = 0;
-	unsigned long addr = -1;
-
-	spin_lock(&io_range_lock);
-	list_for_each_entry(res, &io_range_list, list) {
-		if (address >= res->start && address < res->start + res->size) {
-			addr = address - res->start + offset;
-			break;
-		}
-		offset += res->size;
-	}
-	spin_unlock(&io_range_lock);
-
-	return addr;
+	return logic_pio_trans_cpuaddr(address);
 #else
 	if (address > IO_SPACE_LIMIT)
 		return (unsigned long)-1;
diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h
index f76fbd6..0016413 100644
--- a/include/asm-generic/io.h
+++ b/include/asm-generic/io.h
@@ -901,7 +901,7 @@  static inline void __iomem *ioremap_wt(phys_addr_t offset, size_t size)
 #define ioport_map ioport_map
 static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
 {
-	return PCI_IOBASE + (port & IO_SPACE_LIMIT);
+	return PCI_IOBASE + (port & MMIO_UPPER_LIMIT);
 }
 #endif