diff mbox

[PATCHV3,2/4] OMAP: I2C: Remove the reset in the init path

Message ID 1311256381-25548-3-git-send-email-shubhrajyoti@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Shubhrajyoti Datta July 21, 2011, 1:52 p.m. UTC 
The reset in the driver at init is not needed
anymore as the hwmod framework takes care of
reseting it.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   73 ++++++++++++----------------------------
 1 files changed, 22 insertions(+), 51 deletions(-)

Comments

Felipe Balbi July 21, 2011, 1:59 p.m. UTC | #1 
Hi,

On Thu, Jul 21, 2011 at 07:22:59PM +0530, Shubhrajyoti D wrote:
> The reset in the driver at init is not needed
> anymore as the hwmod framework takes care of
> reseting it.
> 
> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>

this is still doing two things:

a. remove the reset from init path
b. add and use ->device_reset() when needed.
Shubhrajyoti Datta July 21, 2011, 3:24 p.m. UTC | #2 
On Thursday 21 July 2011 07:29 PM, Felipe Balbi wrote:
> Hi,
>
> On Thu, Jul 21, 2011 at 07:22:59PM +0530, Shubhrajyoti D wrote:
>> The reset in the driver at init is not needed
>> anymore as the hwmod framework takes care of
>> reseting it.
>>
>> Signed-off-by: Shubhrajyoti D<shubhrajyoti@ti.com>
> this is still doing two things:
>
> a. remove the reset from init path
> b. add and use ->device_reset() when needed.
Yes agree ,  will add it.

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Kevin Hilman July 21, 2011, 3:30 p.m. UTC | #3 
Shubhrajyoti D <shubhrajyoti@ti.com> writes:

> The reset in the driver at init is not needed
> anymore as the hwmod framework takes care of
> reseting it.

Agreed, but...

The addition of the new places for reset (after timeout, after error) is
not immediately clear, and not described here at all.

After digging myself (since it wasn't described in the changelog), I see
that since the reset was removed from omap_i2c_init(), which was called
not only during probe, but also after time out and error handling, new
reset calls were added back in those locations.

This is the kind of thing that needs to be thoroughly described in the
changelog so reviewers who are not necessarily experts in this driver
will easily and *quickly* understand what is going on without having to
dig into all the details themselves.

Summary: Descriptive, detailed changelogs are invaluable to
reviewers/maintainers.

Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 8f87a37..8dc54d5 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -155,9 +155,6 @@  enum {
 #define OMAP_I2C_SYSTEST_SDA_O		(1 << 0)	/* SDA line drive out */
 #endif
 
-/* OCP_SYSSTATUS bit definitions */
-#define SYSS_RESETDONE_MASK		(1 << 0)
-
 /* OCP_SYSCONFIG bit definitions */
 #define SYSC_CLOCKACTIVITY_MASK		(0x3 << 8)
 #define SYSC_SIDLEMODE_MASK		(0x3 << 3)
@@ -182,6 +179,7 @@  struct omap_i2c_dev {
 	u32			latency;	/* maximum mpu wkup latency */
 	void			(*set_mpu_wkup_lat)(struct device *dev,
 						    long latency);
+	int			(*device_reset)(struct device *dev);
 	u32			speed;		/* Speed of bus in Khz */
 	u16			cmd_err;
 	u8			*buf;
@@ -332,7 +330,6 @@  static int omap_i2c_init(struct omap_i2c_dev *dev)
 	u16 psc = 0, scll = 0, sclh = 0, buf = 0;
 	u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
 	unsigned long fclk_rate = 12000000;
-	unsigned long timeout;
 	unsigned long internal_clk = 0;
 	struct clk *fclk;
 	struct platform_device *pdev;
@@ -341,53 +338,16 @@  static int omap_i2c_init(struct omap_i2c_dev *dev)
 	pdev = to_platform_device(dev->dev);
 	pdata = pdev->dev.platform_data;
 
-	if (dev->rev >= OMAP_I2C_OMAP1_REV_2) {
-		/* Disable I2C controller before soft reset */
-		omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
-			omap_i2c_read_reg(dev, OMAP_I2C_CON_REG) &
-				~(OMAP_I2C_CON_EN));
-
-		omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, SYSC_SOFTRESET_MASK);
-		/* For some reason we need to set the EN bit before the
-		 * reset done bit gets set. */
-		timeout = jiffies + OMAP_I2C_TIMEOUT;
-		omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
-		while (!(omap_i2c_read_reg(dev, OMAP_I2C_SYSS_REG) &
-			 SYSS_RESETDONE_MASK)) {
-			if (time_after(jiffies, timeout)) {
-				dev_warn(dev->dev, "timeout waiting "
-						"for controller reset\n");
-				return -ETIMEDOUT;
-			}
-			msleep(1);
-		}
-
-		/* SYSC register is cleared by the reset; rewrite it */
-		if (dev->rev == OMAP_I2C_REV_ON_2430) {
-
-			omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG,
-					   SYSC_AUTOIDLE_MASK);
-
-		} else if (dev->rev >= OMAP_I2C_REV_ON_3430) {
-			dev->syscstate = SYSC_AUTOIDLE_MASK;
-			dev->syscstate |= SYSC_ENAWAKEUP_MASK;
-			dev->syscstate |= (SYSC_IDLEMODE_SMART <<
-			      __ffs(SYSC_SIDLEMODE_MASK));
-			dev->syscstate |= (SYSC_CLOCKACTIVITY_FCLK <<
-			      __ffs(SYSC_CLOCKACTIVITY_MASK));
-
-			omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG,
-							dev->syscstate);
-			/*
-			 * Enabling all wakup sources to stop I2C freezing on
-			 * WFI instruction.
-			 * REVISIT: Some wkup sources might not be needed.
-			 */
-			dev->westate = OMAP_I2C_WE_ALL;
-			if (dev->rev < OMAP_I2C_REV_ON_3530_4430)
-				omap_i2c_write_reg(dev, OMAP_I2C_WE_REG,
-								dev->westate);
-		}
+	if (dev->rev >= OMAP_I2C_REV_ON_3430) {
+		/*
+		 * Enabling all wakup sources to stop I2C freezing on
+		 * WFI instruction.
+		 * REVISIT: Some wkup sources might not be needed.
+		 */
+		dev->westate = OMAP_I2C_WE_ALL;
+		if (dev->rev < OMAP_I2C_REV_ON_3530_4430)
+			omap_i2c_write_reg(dev, OMAP_I2C_WE_REG,
+							dev->westate);
 	}
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 
@@ -612,6 +572,11 @@  static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 		return r;
 	if (r == 0) {
 		dev_err(dev->dev, "controller timed out\n");
+		if (dev->device_reset != NULL) {
+			r = dev->device_reset(dev->dev);
+			if (r < 0)
+				dev_err(dev->dev, "reset failed\n");
+		}
 		omap_i2c_init(dev);
 		return -ETIMEDOUT;
 	}
@@ -622,6 +587,11 @@  static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 	/* We have an error */
 	if (dev->cmd_err & (OMAP_I2C_STAT_AL | OMAP_I2C_STAT_ROVR |
 			    OMAP_I2C_STAT_XUDF)) {
+		if (dev->device_reset != NULL) {
+			r = dev->device_reset(dev->dev);
+			if (r < 0)
+				dev_err(dev->dev, "reset failed\n");
+		}
 		omap_i2c_init(dev);
 		return -EIO;
 	}
@@ -1024,6 +994,7 @@  omap_i2c_probe(struct platform_device *pdev)
 	if (pdata != NULL) {
 		speed = pdata->clkrate;
 		dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
+		dev->device_reset = pdata->device_reset;
 	} else {
 		speed = 100;	/* Default speed */
 		dev->set_mpu_wkup_lat = NULL;