| Message ID | 1521789591-28628-3-git-send-email-smasetty@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Andy Gross |
| Headers | show |
On Fri, Mar 23, 2018 at 12:49:48PM +0530, Sharat Masetty wrote: > Add client side bindings required for the GPU to use the last level > system cache. Also add a register range in the GPU CX domain. Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Also, these should go the the devicetree lists for review (but maybe wait until the other changes have gotten further through the process). > Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> > --- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 8 ++++++-- > 1 file changed, 6 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index eb0a1b2..7e2d938 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -887,8 +887,8 @@ > compatible = "qcom,adreno-630.2", "qcom,adreno"; > #stream-id-cells = <16>; > > - reg = <0x5000000 0x40000>; > - reg-names = "kgsl_3d0_reg_memory"; > + reg = <0x5000000 0x40000>, <0x509e000 0x10>; > + reg-names = "kgsl_3d0_reg_memory", "cx_mem"; > > /* > * Look ma, no clocks! The GPU clocks and power are controlled > @@ -898,6 +898,10 @@ > interrupts = <0 300 0>; > interrupt-names = "kgsl_3d0_irq"; > > + /* GPU related llc slices */ > + cache-slice-names = "gpu", "gpuhtw"; > + cache-slices = <&llcc 12>, <&llcc 11>; > + > iommus = <&kgsl_smmu 0>; > > operating-points-v2 = <&gpu_opp_table>; > -- > 1.9.1 > > _______________________________________________ > Freedreno mailing list > Freedreno@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/freedreno
On 4/4/2018 2:52 AM, Jordan Crouse wrote: > On Fri, Mar 23, 2018 at 12:49:48PM +0530, Sharat Masetty wrote: >> Add client side bindings required for the GPU to use the last level >> system cache. Also add a register range in the GPU CX domain. > > Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> > > Also, these should go the the devicetree lists for review (but maybe wait until > the other changes have gotten further through the process). Thanks Jordan for the review and the reminder, I will send this specific patch out to the devicetree mailing list for review. > >> Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> >> --- >> arch/arm64/boot/dts/qcom/sdm845.dtsi | 8 ++++++-- >> 1 file changed, 6 insertions(+), 2 deletions(-) >> >> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi >> index eb0a1b2..7e2d938 100644 >> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi >> @@ -887,8 +887,8 @@ >> compatible = "qcom,adreno-630.2", "qcom,adreno"; >> #stream-id-cells = <16>; >> >> - reg = <0x5000000 0x40000>; >> - reg-names = "kgsl_3d0_reg_memory"; >> + reg = <0x5000000 0x40000>, <0x509e000 0x10>; >> + reg-names = "kgsl_3d0_reg_memory", "cx_mem"; >> >> /* >> * Look ma, no clocks! The GPU clocks and power are controlled >> @@ -898,6 +898,10 @@ >> interrupts = <0 300 0>; >> interrupt-names = "kgsl_3d0_irq"; >> >> + /* GPU related llc slices */ >> + cache-slice-names = "gpu", "gpuhtw"; >> + cache-slices = <&llcc 12>, <&llcc 11>; >> + >> iommus = <&kgsl_smmu 0>; >> >> operating-points-v2 = <&gpu_opp_table>; >> -- >> 1.9.1 >> >> _______________________________________________ >> Freedreno mailing list >> Freedreno@lists.freedesktop.org >> https://lists.freedesktop.org/mailman/listinfo/freedreno >
Hi Sharat, On 3/23/2018 12:49 PM, Sharat Masetty wrote: > Add client side bindings required for the GPU to use the last level > system cache. Also add a register range in the GPU CX domain. > > Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> > --- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 8 ++++++-- > 1 file changed, 6 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index eb0a1b2..7e2d938 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -887,8 +887,8 @@ > compatible = "qcom,adreno-630.2", "qcom,adreno"; > #stream-id-cells = <16>; > > - reg = <0x5000000 0x40000>; > - reg-names = "kgsl_3d0_reg_memory"; > + reg = <0x5000000 0x40000>, <0x509e000 0x10>; > + reg-names = "kgsl_3d0_reg_memory", "cx_mem"; > > /* > * Look ma, no clocks! The GPU clocks and power are controlled > @@ -898,6 +898,10 @@ > interrupts = <0 300 0>; > interrupt-names = "kgsl_3d0_irq"; > > + /* GPU related llc slices */ > + cache-slice-names = "gpu", "gpuhtw"; > + cache-slices = <&llcc 12>, <&llcc 11>; Please add corresponding binding doc changes. Best regards Vivek > + > iommus = <&kgsl_smmu 0>; > > operating-points-v2 = <&gpu_opp_table>; -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index eb0a1b2..7e2d938 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -887,8 +887,8 @@ compatible = "qcom,adreno-630.2", "qcom,adreno"; #stream-id-cells = <16>; - reg = <0x5000000 0x40000>; - reg-names = "kgsl_3d0_reg_memory"; + reg = <0x5000000 0x40000>, <0x509e000 0x10>; + reg-names = "kgsl_3d0_reg_memory", "cx_mem"; /* * Look ma, no clocks! The GPU clocks and power are controlled @@ -898,6 +898,10 @@ interrupts = <0 300 0>; interrupt-names = "kgsl_3d0_irq"; + /* GPU related llc slices */ + cache-slice-names = "gpu", "gpuhtw"; + cache-slices = <&llcc 12>, <&llcc 11>; + iommus = <&kgsl_smmu 0>; operating-points-v2 = <&gpu_opp_table>;
Add client side bindings required for the GPU to use the last level system cache. Also add a register range in the GPU CX domain. Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)