| Message ID | 20180404114706.15856-1-brgl@bgdev.pl (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 4 April 2018 12:47:06 BST, Bartosz Golaszewski <brgl@bgdev.pl> wrote: >We want to work towards phasing out the at24_platform_data structure. >There are few users and its contents can be represented using generic >device properties. Using device properties only will allow us to >significantly simplify the at24 configuration code. > >Remove the at24_platform_data structure and replace it with an array >of property entries. Drop the byte_len/size property, as the model name >already implies the EEPROM's size. > >Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Looks sensible to me. Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com> Will be a while before I can test but this looks safe enough.. >--- >NOTE: resending with correct e-mail address for Jonathan Cameron. > > arch/arm/mach-pxa/stargate2.c | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > >diff --git a/arch/arm/mach-pxa/stargate2.c >b/arch/arm/mach-pxa/stargate2.c >index df62bb23dbee..bbea5fa9a140 100644 >--- a/arch/arm/mach-pxa/stargate2.c >+++ b/arch/arm/mach-pxa/stargate2.c >@@ -27,11 +27,11 @@ > > #include <linux/platform_data/i2c-pxa.h> > #include <linux/platform_data/pcf857x.h> >-#include <linux/platform_data/at24.h> > #include <linux/smc91x.h> > #include <linux/gpio/machine.h> > #include <linux/gpio.h> > #include <linux/leds.h> >+#include <linux/property.h> > > #include <asm/types.h> > #include <asm/setup.h> >@@ -795,9 +795,9 @@ static struct pcf857x_platform_data >platform_data_pcf857x = { > .context = NULL, > }; > >-static struct at24_platform_data pca9500_eeprom_pdata = { >- .byte_len = 256, >- .page_size = 4, >+static const struct property_entry pca9500_eeprom_properties[] = { >+ PROPERTY_ENTRY_U32("pagesize", 4), >+ { } > }; > > /** >@@ -935,7 +935,7 @@ static struct i2c_board_info __initdata >stargate2_i2c_board_info[] = { > }, { > .type = "24c02", > .addr = 0x57, >- .platform_data = &pca9500_eeprom_pdata, >+ .properties = pca9500_eeprom_properties, > }, { > .type = "max1238", > .addr = 0x35,
Bartosz Golaszewski <brgl@bgdev.pl> writes: > We want to work towards phasing out the at24_platform_data structure. > There are few users and its contents can be represented using generic > device properties. Using device properties only will allow us to > significantly simplify the at24 configuration code. > > Remove the at24_platform_data structure and replace it with an array > of property entries. Drop the byte_len/size property, as the model name > already implies the EEPROM's size. Hi Bartosz, I'd like a little explanation for the last sentence. Are you implying that ac24.c is using the "type" field, and if so could you point me to the correct line, because I was under the impression a property called "size" is used for byte_len value ... ? Cheers. -- Robert
2018-04-04 21:44 GMT+02:00 Robert Jarzmik <robert.jarzmik@free.fr>: > Bartosz Golaszewski <brgl@bgdev.pl> writes: > >> We want to work towards phasing out the at24_platform_data structure. >> There are few users and its contents can be represented using generic >> device properties. Using device properties only will allow us to >> significantly simplify the at24 configuration code. >> >> Remove the at24_platform_data structure and replace it with an array >> of property entries. Drop the byte_len/size property, as the model name >> already implies the EEPROM's size. > Hi Bartosz, > > I'd like a little explanation for the last sentence. Are you implying that > ac24.c is using the "type" field, and if so could you point me to the correct > line, because I was under the impression a property called "size" is used for > byte_len value ... ? > Yes, it does use the type field from i2c_board_info implicitly over i2c-core. The type field is copied over to client->name and then is matched against the i2c ID table from which we get the associated chip data (unless the type is "at24") containing the size and flags. Hope that helps. Bartosz
Bartosz Golaszewski <brgl@bgdev.pl> writes: > 2018-04-04 21:44 GMT+02:00 Robert Jarzmik <robert.jarzmik@free.fr>: >> Bartosz Golaszewski <brgl@bgdev.pl> writes: > Yes, it does use the type field from i2c_board_info implicitly over > i2c-core. The type field is copied over to client->name and then is > matched against the i2c ID table from which we get the associated chip > data (unless the type is "at24") containing the size and flags. Ah yes, the "struct i2c_device_id at24_ids" part, I see. Applied to pxa/for-next, thanks.
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index df62bb23dbee..bbea5fa9a140 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -27,11 +27,11 @@ #include <linux/platform_data/i2c-pxa.h> #include <linux/platform_data/pcf857x.h> -#include <linux/platform_data/at24.h> #include <linux/smc91x.h> #include <linux/gpio/machine.h> #include <linux/gpio.h> #include <linux/leds.h> +#include <linux/property.h> #include <asm/types.h> #include <asm/setup.h> @@ -795,9 +795,9 @@ static struct pcf857x_platform_data platform_data_pcf857x = { .context = NULL, }; -static struct at24_platform_data pca9500_eeprom_pdata = { - .byte_len = 256, - .page_size = 4, +static const struct property_entry pca9500_eeprom_properties[] = { + PROPERTY_ENTRY_U32("pagesize", 4), + { } }; /** @@ -935,7 +935,7 @@ static struct i2c_board_info __initdata stargate2_i2c_board_info[] = { }, { .type = "24c02", .addr = 0x57, - .platform_data = &pca9500_eeprom_pdata, + .properties = pca9500_eeprom_properties, }, { .type = "max1238", .addr = 0x35,
We want to work towards phasing out the at24_platform_data structure. There are few users and its contents can be represented using generic device properties. Using device properties only will allow us to significantly simplify the at24 configuration code. Remove the at24_platform_data structure and replace it with an array of property entries. Drop the byte_len/size property, as the model name already implies the EEPROM's size. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> --- NOTE: resending with correct e-mail address for Jonathan Cameron. arch/arm/mach-pxa/stargate2.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)