| Message ID | 20180408130942.19148-1-marek.vasut+renesas@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On 04/08/2018 06:09 AM, Marek Vasut wrote: > This patch replaces the (1 << n) with BIT(n) and cleans up whitespace, > no functional change. > > Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> > Cc: Geert Uytterhoeven <geert+renesas@glider.be> > Cc: Phil Edworthy <phil.edworthy@renesas.com> > Cc: Simon Horman <horms+renesas@verge.net.au> > Cc: Wolfram Sang <wsa@the-dreams.de> > Cc: linux-renesas-soc@vger.kernel.org > --- > V2: Reword the commit message > --- > drivers/pci/host/pcie-rcar.c | 52 ++++++++++++++++++++++---------------------- > 1 file changed, 26 insertions(+), 26 deletions(-) > > diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c > index 25f68305322c..5ab7bf6a8de0 100644 > --- a/drivers/pci/host/pcie-rcar.c > +++ b/drivers/pci/host/pcie-rcar.c > @@ -30,9 +30,9 @@ missing this: #include <linux/bitops.h> > #define PCIECAR 0x000010 > #define PCIECCTLR 0x000018 > -#define CONFIG_SEND_ENABLE (1 << 31) > +#define CONFIG_SEND_ENABLE BIT(31) > #define TYPE0 (0 << 8) > -#define TYPE1 (1 << 8) > +#define TYPE1 BIT(8) > #define PCIECDR 0x000020 > #define PCIEMSR 0x000028 > #define PCIEINTXR 0x000400 > @@ -44,7 +44,7 @@ > #define PCIETSTR 0x02004 > #define DATA_LINK_ACTIVE 1 > #define PCIEERRFR 0x02020 > -#define UNSUPPORTED_REQUEST (1 << 4) > +#define UNSUPPORTED_REQUEST BIT(4) > #define PCIEMSIFR 0x02044 > #define PCIEMSIALR 0x02048 > #define MSIFE 1 > @@ -57,17 +57,17 @@ > /* local address reg & mask */ > #define PCIELAR(x) (0x02200 + ((x) * 0x20)) > #define PCIELAMR(x) (0x02208 + ((x) * 0x20)) > -#define LAM_PREFETCH (1 << 3) > -#define LAM_64BIT (1 << 2) > -#define LAR_ENABLE (1 << 1) > +#define LAM_PREFETCH BIT(3) > +#define LAM_64BIT BIT(2) > +#define LAR_ENABLE BIT(1) > > /* PCIe address reg & mask */ > #define PCIEPALR(x) (0x03400 + ((x) * 0x20)) > #define PCIEPAUR(x) (0x03404 + ((x) * 0x20)) > #define PCIEPAMR(x) (0x03408 + ((x) * 0x20)) > #define PCIEPTCTLR(x) (0x0340c + ((x) * 0x20)) > -#define PAR_ENABLE (1 << 31) > -#define IO_SPACE (1 << 8) > +#define PAR_ENABLE BIT(31) > +#define IO_SPACE BIT(8)
On 04/08/2018 05:27 PM, Randy Dunlap wrote: > On 04/08/2018 06:09 AM, Marek Vasut wrote: >> This patch replaces the (1 << n) with BIT(n) and cleans up whitespace, >> no functional change. >> >> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> >> Cc: Geert Uytterhoeven <geert+renesas@glider.be> >> Cc: Phil Edworthy <phil.edworthy@renesas.com> >> Cc: Simon Horman <horms+renesas@verge.net.au> >> Cc: Wolfram Sang <wsa@the-dreams.de> >> Cc: linux-renesas-soc@vger.kernel.org >> --- >> V2: Reword the commit message >> --- >> drivers/pci/host/pcie-rcar.c | 52 ++++++++++++++++++++++---------------------- >> 1 file changed, 26 insertions(+), 26 deletions(-) >> >> diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c >> index 25f68305322c..5ab7bf6a8de0 100644 >> --- a/drivers/pci/host/pcie-rcar.c >> +++ b/drivers/pci/host/pcie-rcar.c >> @@ -30,9 +30,9 @@ > > missing this: > > #include <linux/bitops.h> This compiles just fine without it though, which means it's probably pulled in through some of the other includes already present.
On 04/08/2018 09:34 AM, Marek Vasut wrote: > On 04/08/2018 05:27 PM, Randy Dunlap wrote: >> On 04/08/2018 06:09 AM, Marek Vasut wrote: >>> This patch replaces the (1 << n) with BIT(n) and cleans up whitespace, >>> no functional change. >>> >>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> >>> Cc: Geert Uytterhoeven <geert+renesas@glider.be> >>> Cc: Phil Edworthy <phil.edworthy@renesas.com> >>> Cc: Simon Horman <horms+renesas@verge.net.au> >>> Cc: Wolfram Sang <wsa@the-dreams.de> >>> Cc: linux-renesas-soc@vger.kernel.org >>> --- >>> V2: Reword the commit message >>> --- >>> drivers/pci/host/pcie-rcar.c | 52 ++++++++++++++++++++++---------------------- >>> 1 file changed, 26 insertions(+), 26 deletions(-) >>> >>> diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c >>> index 25f68305322c..5ab7bf6a8de0 100644 >>> --- a/drivers/pci/host/pcie-rcar.c >>> +++ b/drivers/pci/host/pcie-rcar.c >>> @@ -30,9 +30,9 @@ >> >> missing this: >> >> #include <linux/bitops.h> > > This compiles just fine without it though, which means it's probably > pulled in through some of the other includes already present. > I suspected that. However, please see rule #1 in Documentation/process/submit-checklist.rst: 1) If you use a facility then #include the file that defines/declares that facility. Don't depend on other header files pulling in ones that you use.
On 04/08/2018 06:51 PM, Randy Dunlap wrote: > On 04/08/2018 09:34 AM, Marek Vasut wrote: >> On 04/08/2018 05:27 PM, Randy Dunlap wrote: >>> On 04/08/2018 06:09 AM, Marek Vasut wrote: >>>> This patch replaces the (1 << n) with BIT(n) and cleans up whitespace, >>>> no functional change. >>>> >>>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> >>>> Cc: Geert Uytterhoeven <geert+renesas@glider.be> >>>> Cc: Phil Edworthy <phil.edworthy@renesas.com> >>>> Cc: Simon Horman <horms+renesas@verge.net.au> >>>> Cc: Wolfram Sang <wsa@the-dreams.de> >>>> Cc: linux-renesas-soc@vger.kernel.org >>>> --- >>>> V2: Reword the commit message >>>> --- >>>> drivers/pci/host/pcie-rcar.c | 52 ++++++++++++++++++++++---------------------- >>>> 1 file changed, 26 insertions(+), 26 deletions(-) >>>> >>>> diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c >>>> index 25f68305322c..5ab7bf6a8de0 100644 >>>> --- a/drivers/pci/host/pcie-rcar.c >>>> +++ b/drivers/pci/host/pcie-rcar.c >>>> @@ -30,9 +30,9 @@ >>> >>> missing this: >>> >>> #include <linux/bitops.h> >> >> This compiles just fine without it though, which means it's probably >> pulled in through some of the other includes already present. >> > > I suspected that. However, please see rule #1 in > Documentation/process/submit-checklist.rst: > > 1) If you use a facility then #include the file that defines/declares > that facility. Don't depend on other header files pulling in ones > that you use. If I was to include every single header from which I use something, wouldn't that make the list real long then ? Is that really worth it?
Hi Marek, Thanks for your work. On 2018-04-08 15:09:42 +0200, Marek Vasut wrote: > This patch replaces the (1 << n) with BIT(n) and cleans up whitespace, > no functional change. > > Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> > Cc: Geert Uytterhoeven <geert+renesas@glider.be> > Cc: Phil Edworthy <phil.edworthy@renesas.com> > Cc: Simon Horman <horms+renesas@verge.net.au> > Cc: Wolfram Sang <wsa@the-dreams.de> > Cc: linux-renesas-soc@vger.kernel.org I like this cleanup! I have no input on Randy's comment about if you should include bitops.h or not. But for the macro changes themselves. Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > --- > V2: Reword the commit message > --- > drivers/pci/host/pcie-rcar.c | 52 ++++++++++++++++++++++---------------------- > 1 file changed, 26 insertions(+), 26 deletions(-) > > diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c > index 25f68305322c..5ab7bf6a8de0 100644 > --- a/drivers/pci/host/pcie-rcar.c > +++ b/drivers/pci/host/pcie-rcar.c > @@ -30,9 +30,9 @@ > > #define PCIECAR 0x000010 > #define PCIECCTLR 0x000018 > -#define CONFIG_SEND_ENABLE (1 << 31) > +#define CONFIG_SEND_ENABLE BIT(31) > #define TYPE0 (0 << 8) > -#define TYPE1 (1 << 8) > +#define TYPE1 BIT(8) > #define PCIECDR 0x000020 > #define PCIEMSR 0x000028 > #define PCIEINTXR 0x000400 > @@ -44,7 +44,7 @@ > #define PCIETSTR 0x02004 > #define DATA_LINK_ACTIVE 1 > #define PCIEERRFR 0x02020 > -#define UNSUPPORTED_REQUEST (1 << 4) > +#define UNSUPPORTED_REQUEST BIT(4) > #define PCIEMSIFR 0x02044 > #define PCIEMSIALR 0x02048 > #define MSIFE 1 > @@ -57,17 +57,17 @@ > /* local address reg & mask */ > #define PCIELAR(x) (0x02200 + ((x) * 0x20)) > #define PCIELAMR(x) (0x02208 + ((x) * 0x20)) > -#define LAM_PREFETCH (1 << 3) > -#define LAM_64BIT (1 << 2) > -#define LAR_ENABLE (1 << 1) > +#define LAM_PREFETCH BIT(3) > +#define LAM_64BIT BIT(2) > +#define LAR_ENABLE BIT(1) > > /* PCIe address reg & mask */ > #define PCIEPALR(x) (0x03400 + ((x) * 0x20)) > #define PCIEPAUR(x) (0x03404 + ((x) * 0x20)) > #define PCIEPAMR(x) (0x03408 + ((x) * 0x20)) > #define PCIEPTCTLR(x) (0x0340c + ((x) * 0x20)) > -#define PAR_ENABLE (1 << 31) > -#define IO_SPACE (1 << 8) > +#define PAR_ENABLE BIT(31) > +#define IO_SPACE BIT(8) > > /* Configuration */ > #define PCICONF(x) (0x010000 + ((x) * 0x4)) > @@ -79,23 +79,23 @@ > #define IDSETR1 0x011004 > #define TLCTLR 0x011048 > #define MACSR 0x011054 > -#define SPCHGFIN (1 << 4) > -#define SPCHGFAIL (1 << 6) > -#define SPCHGSUC (1 << 7) > +#define SPCHGFIN BIT(4) > +#define SPCHGFAIL BIT(6) > +#define SPCHGSUC BIT(7) > #define LINK_SPEED (0xf << 16) > #define LINK_SPEED_2_5GTS (1 << 16) > #define LINK_SPEED_5_0GTS (2 << 16) > #define MACCTLR 0x011058 > -#define SPEED_CHANGE (1 << 24) > -#define SCRAMBLE_DISABLE (1 << 27) > +#define SPEED_CHANGE BIT(24) > +#define SCRAMBLE_DISABLE BIT(27) > #define MACS2R 0x011078 > #define MACCGSPSETR 0x011084 > -#define SPCNGRSN (1 << 31) > +#define SPCNGRSN BIT(31) > > /* R-Car H1 PHY */ > #define H1_PCIEPHYADRR 0x04000c > -#define WRITE_CMD (1 << 16) > -#define PHY_ACK (1 << 24) > +#define WRITE_CMD BIT(16) > +#define PHY_ACK BIT(24) > #define RATE_POS 12 > #define LANE_POS 8 > #define ADR_POS 0 > @@ -107,19 +107,19 @@ > #define GEN2_PCIEPHYDATA 0x784 > #define GEN2_PCIEPHYCTRL 0x78c > > -#define INT_PCI_MSI_NR 32 > +#define INT_PCI_MSI_NR 32 > > -#define RCONF(x) (PCICONF(0)+(x)) > -#define RPMCAP(x) (PMCAP(0)+(x)) > -#define REXPCAP(x) (EXPCAP(0)+(x)) > -#define RVCCAP(x) (VCCAP(0)+(x)) > +#define RCONF(x) (PCICONF(0) + (x)) > +#define RPMCAP(x) (PMCAP(0) + (x)) > +#define REXPCAP(x) (EXPCAP(0) + (x)) > +#define RVCCAP(x) (VCCAP(0) + (x)) > > -#define PCIE_CONF_BUS(b) (((b) & 0xff) << 24) > -#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 19) > -#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 16) > +#define PCIE_CONF_BUS(b) (((b) & 0xff) << 24) > +#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 19) > +#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 16) > > -#define RCAR_PCI_MAX_RESOURCES 4 > -#define MAX_NR_INBOUND_MAPS 6 > +#define RCAR_PCI_MAX_RESOURCES 4 > +#define MAX_NR_INBOUND_MAPS 6 > > struct rcar_msi { > DECLARE_BITMAP(used, INT_PCI_MSI_NR); > -- > 2.16.2 >
On 04/08/2018 09:53 AM, Marek Vasut wrote: > On 04/08/2018 06:51 PM, Randy Dunlap wrote: >> On 04/08/2018 09:34 AM, Marek Vasut wrote: >>> On 04/08/2018 05:27 PM, Randy Dunlap wrote: >>>> On 04/08/2018 06:09 AM, Marek Vasut wrote: >>>>> This patch replaces the (1 << n) with BIT(n) and cleans up whitespace, >>>>> no functional change. >>>>> >>>>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> >>>>> Cc: Geert Uytterhoeven <geert+renesas@glider.be> >>>>> Cc: Phil Edworthy <phil.edworthy@renesas.com> >>>>> Cc: Simon Horman <horms+renesas@verge.net.au> >>>>> Cc: Wolfram Sang <wsa@the-dreams.de> >>>>> Cc: linux-renesas-soc@vger.kernel.org >>>>> --- >>>>> V2: Reword the commit message >>>>> --- >>>>> drivers/pci/host/pcie-rcar.c | 52 ++++++++++++++++++++++---------------------- >>>>> 1 file changed, 26 insertions(+), 26 deletions(-) >>>>> >>>>> diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c >>>>> index 25f68305322c..5ab7bf6a8de0 100644 >>>>> --- a/drivers/pci/host/pcie-rcar.c >>>>> +++ b/drivers/pci/host/pcie-rcar.c >>>>> @@ -30,9 +30,9 @@ >>>> >>>> missing this: >>>> >>>> #include <linux/bitops.h> >>> >>> This compiles just fine without it though, which means it's probably >>> pulled in through some of the other includes already present. >>> >> >> I suspected that. However, please see rule #1 in >> Documentation/process/submit-checklist.rst: >> >> 1) If you use a facility then #include the file that defines/declares >> that facility. Don't depend on other header files pulling in ones >> that you use. > > If I was to include every single header from which I use something, > wouldn't that make the list real long then ? Is that really worth it? The length of the list of headers is not an issue. And if you are "cleaning up," you might as well do a full job of it. Just because it builds on one $ARCH (with various pulled-in headers) does not mean that it will build on another $ARCH (with different pulled-in headers). Or did you build it on all linux/arch/* ? thanks,
On 04/08/2018 08:03 PM, Randy Dunlap wrote: > On 04/08/2018 09:53 AM, Marek Vasut wrote: >> On 04/08/2018 06:51 PM, Randy Dunlap wrote: >>> On 04/08/2018 09:34 AM, Marek Vasut wrote: >>>> On 04/08/2018 05:27 PM, Randy Dunlap wrote: >>>>> On 04/08/2018 06:09 AM, Marek Vasut wrote: >>>>>> This patch replaces the (1 << n) with BIT(n) and cleans up whitespace, >>>>>> no functional change. >>>>>> >>>>>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> >>>>>> Cc: Geert Uytterhoeven <geert+renesas@glider.be> >>>>>> Cc: Phil Edworthy <phil.edworthy@renesas.com> >>>>>> Cc: Simon Horman <horms+renesas@verge.net.au> >>>>>> Cc: Wolfram Sang <wsa@the-dreams.de> >>>>>> Cc: linux-renesas-soc@vger.kernel.org >>>>>> --- >>>>>> V2: Reword the commit message >>>>>> --- >>>>>> drivers/pci/host/pcie-rcar.c | 52 ++++++++++++++++++++++---------------------- >>>>>> 1 file changed, 26 insertions(+), 26 deletions(-) >>>>>> >>>>>> diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c >>>>>> index 25f68305322c..5ab7bf6a8de0 100644 >>>>>> --- a/drivers/pci/host/pcie-rcar.c >>>>>> +++ b/drivers/pci/host/pcie-rcar.c >>>>>> @@ -30,9 +30,9 @@ >>>>> >>>>> missing this: >>>>> >>>>> #include <linux/bitops.h> >>>> >>>> This compiles just fine without it though, which means it's probably >>>> pulled in through some of the other includes already present. >>>> >>> >>> I suspected that. However, please see rule #1 in >>> Documentation/process/submit-checklist.rst: >>> >>> 1) If you use a facility then #include the file that defines/declares >>> that facility. Don't depend on other header files pulling in ones >>> that you use. >> >> If I was to include every single header from which I use something, >> wouldn't that make the list real long then ? Is that really worth it? > > The length of the list of headers is not an issue. > And if you are "cleaning up," you might as well do a full job of it. I sent a V3 of this "clean up". > Just because it builds on one $ARCH (with various pulled-in headers) does > not mean that it will build on another $ARCH (with different pulled-in headers). > > Or did you build it on all linux/arch/* ? No, since it is limited in Kconfig: depends on ARCH_RENESAS || (ARM && COMPILE_TEST)
diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c index 25f68305322c..5ab7bf6a8de0 100644 --- a/drivers/pci/host/pcie-rcar.c +++ b/drivers/pci/host/pcie-rcar.c @@ -30,9 +30,9 @@ #define PCIECAR 0x000010 #define PCIECCTLR 0x000018 -#define CONFIG_SEND_ENABLE (1 << 31) +#define CONFIG_SEND_ENABLE BIT(31) #define TYPE0 (0 << 8) -#define TYPE1 (1 << 8) +#define TYPE1 BIT(8) #define PCIECDR 0x000020 #define PCIEMSR 0x000028 #define PCIEINTXR 0x000400 @@ -44,7 +44,7 @@ #define PCIETSTR 0x02004 #define DATA_LINK_ACTIVE 1 #define PCIEERRFR 0x02020 -#define UNSUPPORTED_REQUEST (1 << 4) +#define UNSUPPORTED_REQUEST BIT(4) #define PCIEMSIFR 0x02044 #define PCIEMSIALR 0x02048 #define MSIFE 1 @@ -57,17 +57,17 @@ /* local address reg & mask */ #define PCIELAR(x) (0x02200 + ((x) * 0x20)) #define PCIELAMR(x) (0x02208 + ((x) * 0x20)) -#define LAM_PREFETCH (1 << 3) -#define LAM_64BIT (1 << 2) -#define LAR_ENABLE (1 << 1) +#define LAM_PREFETCH BIT(3) +#define LAM_64BIT BIT(2) +#define LAR_ENABLE BIT(1) /* PCIe address reg & mask */ #define PCIEPALR(x) (0x03400 + ((x) * 0x20)) #define PCIEPAUR(x) (0x03404 + ((x) * 0x20)) #define PCIEPAMR(x) (0x03408 + ((x) * 0x20)) #define PCIEPTCTLR(x) (0x0340c + ((x) * 0x20)) -#define PAR_ENABLE (1 << 31) -#define IO_SPACE (1 << 8) +#define PAR_ENABLE BIT(31) +#define IO_SPACE BIT(8) /* Configuration */ #define PCICONF(x) (0x010000 + ((x) * 0x4)) @@ -79,23 +79,23 @@ #define IDSETR1 0x011004 #define TLCTLR 0x011048 #define MACSR 0x011054 -#define SPCHGFIN (1 << 4) -#define SPCHGFAIL (1 << 6) -#define SPCHGSUC (1 << 7) +#define SPCHGFIN BIT(4) +#define SPCHGFAIL BIT(6) +#define SPCHGSUC BIT(7) #define LINK_SPEED (0xf << 16) #define LINK_SPEED_2_5GTS (1 << 16) #define LINK_SPEED_5_0GTS (2 << 16) #define MACCTLR 0x011058 -#define SPEED_CHANGE (1 << 24) -#define SCRAMBLE_DISABLE (1 << 27) +#define SPEED_CHANGE BIT(24) +#define SCRAMBLE_DISABLE BIT(27) #define MACS2R 0x011078 #define MACCGSPSETR 0x011084 -#define SPCNGRSN (1 << 31) +#define SPCNGRSN BIT(31) /* R-Car H1 PHY */ #define H1_PCIEPHYADRR 0x04000c -#define WRITE_CMD (1 << 16) -#define PHY_ACK (1 << 24) +#define WRITE_CMD BIT(16) +#define PHY_ACK BIT(24) #define RATE_POS 12 #define LANE_POS 8 #define ADR_POS 0 @@ -107,19 +107,19 @@ #define GEN2_PCIEPHYDATA 0x784 #define GEN2_PCIEPHYCTRL 0x78c -#define INT_PCI_MSI_NR 32 +#define INT_PCI_MSI_NR 32 -#define RCONF(x) (PCICONF(0)+(x)) -#define RPMCAP(x) (PMCAP(0)+(x)) -#define REXPCAP(x) (EXPCAP(0)+(x)) -#define RVCCAP(x) (VCCAP(0)+(x)) +#define RCONF(x) (PCICONF(0) + (x)) +#define RPMCAP(x) (PMCAP(0) + (x)) +#define REXPCAP(x) (EXPCAP(0) + (x)) +#define RVCCAP(x) (VCCAP(0) + (x)) -#define PCIE_CONF_BUS(b) (((b) & 0xff) << 24) -#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 19) -#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 16) +#define PCIE_CONF_BUS(b) (((b) & 0xff) << 24) +#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 19) +#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 16) -#define RCAR_PCI_MAX_RESOURCES 4 -#define MAX_NR_INBOUND_MAPS 6 +#define RCAR_PCI_MAX_RESOURCES 4 +#define MAX_NR_INBOUND_MAPS 6 struct rcar_msi { DECLARE_BITMAP(used, INT_PCI_MSI_NR);
This patch replaces the (1 << n) with BIT(n) and cleans up whitespace, no functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: linux-renesas-soc@vger.kernel.org --- V2: Reword the commit message --- drivers/pci/host/pcie-rcar.c | 52 ++++++++++++++++++++++---------------------- 1 file changed, 26 insertions(+), 26 deletions(-)