| Message ID | 20180417131052.16336-3-peda@axentia.se (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Peter, On Tue, 17 Apr 2018 15:10:48 +0200 Peter Rosin <peda@axentia.se> wrote: > With bus-type/bus-width properties in the endpoint nodes, the video- > interface of the connection can be specified for cases where the > heuristic fails to select the correct output mode. This can happen > e.g. if not all RGB pins are routed on the PCB; the driver has no > way of knowing this, and needs to be told explicitly. > > This is critical for the devices that have the "conflicting output > formats" issue (SAM9N12, SAM9X5, SAMA5D3), since the most significant > RGB bits move around depending on the selected output mode. For > devices that do not have the "conflicting output formats" issue > (SAMA5D2, SAMA5D4), this is completely irrelevant. > > Signed-off-by: Peter Rosin <peda@axentia.se> > --- > Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt > index 82f2acb3d374..244b48869eb4 100644 > --- a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt > +++ b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt > @@ -15,6 +15,14 @@ Required children nodes: > to external devices using the OF graph reprensentation (see ../graph.txt). > At least one port node is required. > > +Optional properties in grandchild nodes: > + Any endpoint grandchild node may specify a desired video interface > + according to ../../media/video-interfaces.txt, specifically > + - bus-type: must be <0>. > + - bus-width: recognized values are <12>, <16>, <18> and <24>, and > + override any output mode selection hueristic, forcing "rgb444", > + "rgb565", "rgb666" and "rgb888" respectively. > + Can you add an example or update the existing one to show how this should be defined? > Example: > > hlcdc: hlcdc@f0030000 { Thanks, Boris
On 2018-04-18 09:16, Boris Brezillon wrote: > Hi Peter, > > On Tue, 17 Apr 2018 15:10:48 +0200 > Peter Rosin <peda@axentia.se> wrote: > >> With bus-type/bus-width properties in the endpoint nodes, the video- >> interface of the connection can be specified for cases where the >> heuristic fails to select the correct output mode. This can happen >> e.g. if not all RGB pins are routed on the PCB; the driver has no >> way of knowing this, and needs to be told explicitly. >> >> This is critical for the devices that have the "conflicting output >> formats" issue (SAM9N12, SAM9X5, SAMA5D3), since the most significant >> RGB bits move around depending on the selected output mode. For >> devices that do not have the "conflicting output formats" issue >> (SAMA5D2, SAMA5D4), this is completely irrelevant. >> >> Signed-off-by: Peter Rosin <peda@axentia.se> >> --- >> Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt | 8 ++++++++ >> 1 file changed, 8 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt >> index 82f2acb3d374..244b48869eb4 100644 >> --- a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt >> +++ b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt >> @@ -15,6 +15,14 @@ Required children nodes: >> to external devices using the OF graph reprensentation (see ../graph.txt). >> At least one port node is required. >> >> +Optional properties in grandchild nodes: >> + Any endpoint grandchild node may specify a desired video interface >> + according to ../../media/video-interfaces.txt, specifically >> + - bus-type: must be <0>. >> + - bus-width: recognized values are <12>, <16>, <18> and <24>, and >> + override any output mode selection hueristic, forcing "rgb444", heuristic, I'll fix that for v3, so please review as if it wasn't there... >> + "rgb565", "rgb666" and "rgb888" respectively. >> + > > Can you add an example or update the existing one to show how this > should be defined? For v3, I'll extend the binding with this after the preexisting example: ------------------8<----------------- Example 2: With a video interface override to force rgb565, as above but with these changes/additions: &hlcdc { hlcdc-display-controller { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>; port@0 { hlcdc_panel_output: endpoint@0 { bus-type = <0>; bus-width = <16>; }; }; }; }; ------------------8<----------------- Is that a good plan, or should I perhaps duplicate the whole example? Cheers, Peter >> Example: >> >> hlcdc: hlcdc@f0030000 { > > > Thanks, > > Boris >
On Wed, 18 Apr 2018 09:31:53 +0200 Peter Rosin <peda@axentia.se> wrote: > On 2018-04-18 09:16, Boris Brezillon wrote: > > Hi Peter, > > > > On Tue, 17 Apr 2018 15:10:48 +0200 > > Peter Rosin <peda@axentia.se> wrote: > > > >> With bus-type/bus-width properties in the endpoint nodes, the video- > >> interface of the connection can be specified for cases where the > >> heuristic fails to select the correct output mode. This can happen > >> e.g. if not all RGB pins are routed on the PCB; the driver has no > >> way of knowing this, and needs to be told explicitly. > >> > >> This is critical for the devices that have the "conflicting output > >> formats" issue (SAM9N12, SAM9X5, SAMA5D3), since the most significant > >> RGB bits move around depending on the selected output mode. For > >> devices that do not have the "conflicting output formats" issue > >> (SAMA5D2, SAMA5D4), this is completely irrelevant. > >> > >> Signed-off-by: Peter Rosin <peda@axentia.se> > >> --- > >> Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt | 8 ++++++++ > >> 1 file changed, 8 insertions(+) > >> > >> diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt > >> index 82f2acb3d374..244b48869eb4 100644 > >> --- a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt > >> +++ b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt > >> @@ -15,6 +15,14 @@ Required children nodes: > >> to external devices using the OF graph reprensentation (see ../graph.txt). > >> At least one port node is required. > >> > >> +Optional properties in grandchild nodes: > >> + Any endpoint grandchild node may specify a desired video interface > >> + according to ../../media/video-interfaces.txt, specifically > >> + - bus-type: must be <0>. > >> + - bus-width: recognized values are <12>, <16>, <18> and <24>, and > >> + override any output mode selection hueristic, forcing "rgb444", > > heuristic, I'll fix that for v3, so please review as if it wasn't there... > > >> + "rgb565", "rgb666" and "rgb888" respectively. > >> + > > > > Can you add an example or update the existing one to show how this > > should be defined? > > For v3, I'll extend the binding with this after the preexisting example: > > ------------------8<----------------- > Example 2: With a video interface override to force rgb565, as above > but with these changes/additions: > > &hlcdc { > hlcdc-display-controller { > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>; > > port@0 { > hlcdc_panel_output: endpoint@0 { > bus-type = <0>; > bus-width = <16>; > }; > }; > }; > }; > ------------------8<----------------- > > Is that a good plan, or should I perhaps duplicate the whole example? Looks good to me, no need to add a new example. Thanks, Boris
diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt index 82f2acb3d374..244b48869eb4 100644 --- a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt +++ b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt @@ -15,6 +15,14 @@ Required children nodes: to external devices using the OF graph reprensentation (see ../graph.txt). At least one port node is required. +Optional properties in grandchild nodes: + Any endpoint grandchild node may specify a desired video interface + according to ../../media/video-interfaces.txt, specifically + - bus-type: must be <0>. + - bus-width: recognized values are <12>, <16>, <18> and <24>, and + override any output mode selection hueristic, forcing "rgb444", + "rgb565", "rgb666" and "rgb888" respectively. + Example: hlcdc: hlcdc@f0030000 {
With bus-type/bus-width properties in the endpoint nodes, the video- interface of the connection can be specified for cases where the heuristic fails to select the correct output mode. This can happen e.g. if not all RGB pins are routed on the PCB; the driver has no way of knowing this, and needs to be told explicitly. This is critical for the devices that have the "conflicting output formats" issue (SAM9N12, SAM9X5, SAMA5D3), since the most significant RGB bits move around depending on the selected output mode. For devices that do not have the "conflicting output formats" issue (SAMA5D2, SAMA5D4), this is completely irrelevant. Signed-off-by: Peter Rosin <peda@axentia.se> --- Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt | 8 ++++++++ 1 file changed, 8 insertions(+)