diff mbox

[1/1] arm: dts: rockchip: default serial for Tinker Board

Message ID 20180417205623.764-1-xypron.glpk@gmx.de (mailing list archive)
State New, archived
Headers show

Commit Message

Heinrich Schuchardt April 17, 2018, 8:56 p.m. UTC 
The Asus Tinker Board uses serial 2 with 115,200 baud by default for
communication in U-Boot. The same value is also chosen for other RK3288
boards.

So let us set the same value in the Tinker Board device tree.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
---
 arch/arm/boot/dts/rk3288-tinker.dts | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Heiko Stübner April 20, 2018, 12:56 p.m. UTC | #1 
Am Dienstag, 17. April 2018, 22:56:23 CEST schrieb Heinrich Schuchardt:
> The Asus Tinker Board uses serial 2 with 115,200 baud by default for
> communication in U-Boot. The same value is also chosen for other RK3288
> boards.
> 
> So let us set the same value in the Tinker Board device tree.
> 
> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

applied for 4.18

Thanks
Heiko
diff mbox

Patch

diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
index 346b0d8b474d..127488f9f174 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dts
+++ b/arch/arm/boot/dts/rk3288-tinker.dts
@@ -49,6 +49,10 @@ 
 	model = "Rockchip RK3288 Tinker Board";
 	compatible = "asus,rk3288-tinker", "rockchip,rk3288";
 
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
 	memory {
 		reg = <0x0 0x0 0x0 0x80000000>;
 		device_type = "memory";