| Message ID | 20180415145329.855-1-hch@lst.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sun, 15 Apr 2018, Christoph Hellwig wrote: > USB host controllers now must handle highmem, so we can get rid of bounce > buffering highmem pages in the block layer. Sorry, I don't quite understand what you are saying. Do you mean that all USB host controllers now magically _do_ handle highmem? Or do you mean that if they _don't_ handle highmem, we will not support them any more? Alan Stern > Signed-off-by: Christoph Hellwig <hch@lst.de> > --- > drivers/usb/storage/scsiglue.c | 9 --------- > 1 file changed, 9 deletions(-) > > diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c > index c267f2812a04..4e453d9d45d5 100644 > --- a/drivers/usb/storage/scsiglue.c > +++ b/drivers/usb/storage/scsiglue.c > @@ -130,15 +130,6 @@ static int slave_configure(struct scsi_device *sdev) > blk_queue_max_hw_sectors(sdev->request_queue, 2048); > } > > - /* > - * Some USB host controllers can't do DMA; they have to use PIO. > - * They indicate this by setting their dma_mask to NULL. For > - * such controllers we need to make sure the block layer sets > - * up bounce buffers in addressable memory. > - */ > - if (!us->pusb_dev->bus->controller->dma_mask) > - blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH); > - > /* > * We can't put these settings in slave_alloc() because that gets > * called before the device type is known. Consequently these > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sun, Apr 15, 2018 at 11:24:11AM -0400, Alan Stern wrote: > On Sun, 15 Apr 2018, Christoph Hellwig wrote: > > > USB host controllers now must handle highmem, so we can get rid of bounce > > buffering highmem pages in the block layer. > > Sorry, I don't quite understand what you are saying. Do you mean that > all USB host controllers now magically _do_ handle highmem? Or do you > mean that if they _don't_ handle highmem, we will not support them any > more? USB controller themselves never cared about highmem, drivers did. For PIO based controllers they'd have to kmap any address no in the kernel drirect mapping. Nothing in drivers/usb/host or the other diretories related to host drivers calls page_address (only used in a single gadget) or sg_virt (only used in a few upper level drivers), which makes me assume semi-confidently that no USB host driver is not highmem aware these days. Greg, does this match your observation as the USB maintainer? -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, 27 Apr 2018, Christoph Hellwig wrote: > On Sun, Apr 15, 2018 at 11:24:11AM -0400, Alan Stern wrote: > > On Sun, 15 Apr 2018, Christoph Hellwig wrote: > > > > > USB host controllers now must handle highmem, so we can get rid of bounce > > > buffering highmem pages in the block layer. > > > > Sorry, I don't quite understand what you are saying. Do you mean that > > all USB host controllers now magically _do_ handle highmem? Or do you > > mean that if they _don't_ handle highmem, we will not support them any > > more? > > USB controller themselves never cared about highmem, drivers did. For > PIO based controllers they'd have to kmap any address no in the kernel > drirect mapping. > > Nothing in drivers/usb/host or the other diretories related to host > drivers calls page_address (only used in a single gadget) or sg_virt > (only used in a few upper level drivers), which makes me assume > semi-confidently that no USB host driver is not highmem aware these > days. sg_virt is called in drivers/usb/core/message.c. (Maybe that's what you meant by "upper level drivers".) I'm not sure just how important that usage is. Alan Stern > Greg, does this match your observation as the USB maintainer? -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Apr 27, 2018 at 10:09:17AM -0400, Alan Stern wrote: > On Fri, 27 Apr 2018, Christoph Hellwig wrote: > > > On Sun, Apr 15, 2018 at 11:24:11AM -0400, Alan Stern wrote: > > > On Sun, 15 Apr 2018, Christoph Hellwig wrote: > > > > > > > USB host controllers now must handle highmem, so we can get rid of bounce > > > > buffering highmem pages in the block layer. > > > > > > Sorry, I don't quite understand what you are saying. Do you mean that > > > all USB host controllers now magically _do_ handle highmem? Or do you > > > mean that if they _don't_ handle highmem, we will not support them any > > > more? > > > > USB controller themselves never cared about highmem, drivers did. For > > PIO based controllers they'd have to kmap any address no in the kernel > > drirect mapping. > > > > Nothing in drivers/usb/host or the other diretories related to host > > drivers calls page_address (only used in a single gadget) or sg_virt > > (only used in a few upper level drivers), which makes me assume > > semi-confidently that no USB host driver is not highmem aware these > > days. > > sg_virt is called in drivers/usb/core/message.c. (Maybe that's what > you meant by "upper level drivers".) I'm not sure just how important > that usage is. I don't really know either. I'll need some guidance from the usb maintainers on: - when drivers can submit urbs with a scatterlist - if there are any drivers that do not want to take highmem Unfortunately the way dma mapping works in usb is just so deeply convoluted that I have a hard time following it, and often wonder what is intentional and what is accidental in it. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, 2 May 2018, Christoph Hellwig wrote: > On Fri, Apr 27, 2018 at 10:09:17AM -0400, Alan Stern wrote: > > On Fri, 27 Apr 2018, Christoph Hellwig wrote: > > > > > On Sun, Apr 15, 2018 at 11:24:11AM -0400, Alan Stern wrote: > > > > On Sun, 15 Apr 2018, Christoph Hellwig wrote: > > > > > > > > > USB host controllers now must handle highmem, so we can get rid of bounce > > > > > buffering highmem pages in the block layer. > > > > > > > > Sorry, I don't quite understand what you are saying. Do you mean that > > > > all USB host controllers now magically _do_ handle highmem? Or do you > > > > mean that if they _don't_ handle highmem, we will not support them any > > > > more? > > > > > > USB controller themselves never cared about highmem, drivers did. For > > > PIO based controllers they'd have to kmap any address no in the kernel > > > drirect mapping. > > > > > > Nothing in drivers/usb/host or the other diretories related to host > > > drivers calls page_address (only used in a single gadget) or sg_virt > > > (only used in a few upper level drivers), which makes me assume > > > semi-confidently that no USB host driver is not highmem aware these > > > days. > > > > sg_virt is called in drivers/usb/core/message.c. (Maybe that's what > > you meant by "upper level drivers".) I'm not sure just how important > > that usage is. > > I don't really know either. I'll need some guidance from the usb > maintainers on: > > - when drivers can submit urbs with a scatterlist > - if there are any drivers that do not want to take highmem > > Unfortunately the way dma mapping works in usb is just so deeply > convoluted that I have a hard time following it, and often wonder > what is intentional and what is accidental in it. I can help explain some of this. Drivers are allowed to submit bulk URBs with scatterlists. Isochronous definitely does not support scatterlists. I suppose control/interrupt might or might not support it (depending on how the host controller driver is written), but (1) support is not guaranteed so drivers can't rely on it, and (2) nobody ever needs to use scatter-gather I/O for control or interrupt transfers anyway. In practice, mass storage (usb_storage, uas, and f_tcm) is the only important USB application that I know uses scatterlists. The usbtest driver includes scatter-gather support, but it is purely for testing and verification purposes. Also, the usbfs driver (core/devio.c) can use SG, but in this case the scatterlist is constructed by the driver itself rather than received from someone else. Scatter-gather I/O is handled at two different levels in the USB subsystem. Some of the host controller drivers have native SG support; for them it isn't a problem, so we only have to worry about the other ones. Most of those use normal DMA transfers, so high memory issues should be handled by the block layer and DMA core. However, a few of the drivers rely on PIO or special memory that is local to the controller hardware. You can see all the different possibilities if you read through core/hcd.c: map_urb_for_dma() and usb_hcd_map_urb_for_dma(). I don't remember which drivers are special, but you can search the driver source code for dma_mask and HCD_LOCAL_MEM. At a higher level, there are some library routines in core/message.c that provide a poor-man's form of SG for cases where the host controller driver doesn't have native support; see usb_sg_init() and the surrounding routines. (The library predates the native SG support by many years.) This is really the only interesting case; the code creates an individual URB for each entry in the scatterlist and submits them all. The question is whether the host controller driver will be able to access the data given by the scatterlist entries. Do you have any particular questions about accidental vs. intentional aspects of the DMA support? Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index c267f2812a04..4e453d9d45d5 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -130,15 +130,6 @@ static int slave_configure(struct scsi_device *sdev) blk_queue_max_hw_sectors(sdev->request_queue, 2048); } - /* - * Some USB host controllers can't do DMA; they have to use PIO. - * They indicate this by setting their dma_mask to NULL. For - * such controllers we need to make sure the block layer sets - * up bounce buffers in addressable memory. - */ - if (!us->pusb_dev->bus->controller->dma_mask) - blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH); - /* * We can't put these settings in slave_alloc() because that gets * called before the device type is known. Consequently these
USB host controllers now must handle highmem, so we can get rid of bounce buffering highmem pages in the block layer. Signed-off-by: Christoph Hellwig <hch@lst.de> --- drivers/usb/storage/scsiglue.c | 9 --------- 1 file changed, 9 deletions(-)