diff mbox

[1/4] platform: x86: intel_cht_int33fe: Fix dependencies

Message ID 20180430124158.45269-2-heikki.krogerus@linux.intel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Heikki Krogerus April 30, 2018, 12:41 p.m. UTC 
The driver will not probe unless bq24190 is loaded, so
making it a dependency.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/Kconfig   | 3 +--
 drivers/platform/x86/Kconfig | 4 ++--
 2 files changed, 3 insertions(+), 4 deletions(-)

Comments

Hans de Goede May 1, 2018, 9:53 a.m. UTC | #1 
Hi,

On 30-04-18 14:41, Heikki Krogerus wrote:
> The driver will not probe unless bq24190 is loaded, so
> making it a dependency.

Hmm, the dependency is pure run-time, with this Kconfig
change if a user now decides to builtin the intel_cht_int33fe
driver, the bq24190 driver must also be builtin, I'm not sure
if that is a good thing.

Regards,

Hans


> 
> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Cc: Wolfram Sang <wsa@the-dreams.de>
> Cc: Darren Hart <dvhart@infradead.org>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>   drivers/i2c/busses/Kconfig   | 3 +--
>   drivers/platform/x86/Kconfig | 4 ++--
>   2 files changed, 3 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 8d21b9825d71..fce9f2ca0570 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -202,8 +202,7 @@ config I2C_CHT_WC
>   
>   	  Note this controller is hooked up to a TI bq24292i charger-IC,
>   	  combined with a FUSB302 Type-C port-controller as such it is advised
> -	  to also select CONFIG_CHARGER_BQ24190=m and CONFIG_TYPEC_FUSB302=m
> -	  (the fusb302 driver currently is in drivers/staging).
> +	  to also select CONFIG_TYPEC_FUSB302=m.
>   
>   config I2C_NFORCE2
>   	tristate "Nvidia nForce2, nForce3 and nForce4"
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 39d06dd1f63a..1dbd9d547e60 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -866,6 +866,7 @@ config ACPI_CMPC
>   config INTEL_CHT_INT33FE
>   	tristate "Intel Cherry Trail ACPI INT33FE Driver"
>   	depends on X86 && ACPI && I2C && REGULATOR
> +	depends on CHARGER_BQ24190
>   	---help---
>   	  This driver add support for the INT33FE ACPI device found on
>   	  some Intel Cherry Trail devices.
> @@ -877,8 +878,7 @@ config INTEL_CHT_INT33FE
>   	  i2c drivers for these chips can bind to the them.
>   
>   	  If you enable this driver it is advised to also select
> -	  CONFIG_TYPEC_FUSB302=m, CONFIG_CHARGER_BQ24190=m and
> -	  CONFIG_BATTERY_MAX17042=m.
> +	  CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m.
>   
>   config INTEL_INT0002_VGPIO
>   	tristate "Intel ACPI INT0002 Virtual GPIO driver"
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Heikki Krogerus May 2, 2018, 6:59 a.m. UTC | #2 
On Tue, May 01, 2018 at 11:53:24AM +0200, Hans de Goede wrote:
> Hi,
> 
> On 30-04-18 14:41, Heikki Krogerus wrote:
> > The driver will not probe unless bq24190 is loaded, so
> > making it a dependency.
> 
> Hmm, the dependency is pure run-time, with this Kconfig
> change if a user now decides to builtin the intel_cht_int33fe
> driver, the bq24190 driver must also be builtin, I'm not sure
> if that is a good thing.

OK. That should be possible to sort out with something like this:

depends on CHARGER_BQ24190=y || CHARGER_BQ24190=INTEL_CHT_INT33FE

I'll fix this one.

> > Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> > Cc: Wolfram Sang <wsa@the-dreams.de>
> > Cc: Darren Hart <dvhart@infradead.org>
> > Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > ---
> >   drivers/i2c/busses/Kconfig   | 3 +--
> >   drivers/platform/x86/Kconfig | 4 ++--
> >   2 files changed, 3 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> > index 8d21b9825d71..fce9f2ca0570 100644
> > --- a/drivers/i2c/busses/Kconfig
> > +++ b/drivers/i2c/busses/Kconfig
> > @@ -202,8 +202,7 @@ config I2C_CHT_WC
> >   	  Note this controller is hooked up to a TI bq24292i charger-IC,
> >   	  combined with a FUSB302 Type-C port-controller as such it is advised
> > -	  to also select CONFIG_CHARGER_BQ24190=m and CONFIG_TYPEC_FUSB302=m
> > -	  (the fusb302 driver currently is in drivers/staging).
> > +	  to also select CONFIG_TYPEC_FUSB302=m.
> >   config I2C_NFORCE2
> >   	tristate "Nvidia nForce2, nForce3 and nForce4"
> > diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> > index 39d06dd1f63a..1dbd9d547e60 100644
> > --- a/drivers/platform/x86/Kconfig
> > +++ b/drivers/platform/x86/Kconfig
> > @@ -866,6 +866,7 @@ config ACPI_CMPC
> >   config INTEL_CHT_INT33FE
> >   	tristate "Intel Cherry Trail ACPI INT33FE Driver"
> >   	depends on X86 && ACPI && I2C && REGULATOR
> > +	depends on CHARGER_BQ24190
> >   	---help---
> >   	  This driver add support for the INT33FE ACPI device found on
> >   	  some Intel Cherry Trail devices.
> > @@ -877,8 +878,7 @@ config INTEL_CHT_INT33FE
> >   	  i2c drivers for these chips can bind to the them.
> >   	  If you enable this driver it is advised to also select
> > -	  CONFIG_TYPEC_FUSB302=m, CONFIG_CHARGER_BQ24190=m and
> > -	  CONFIG_BATTERY_MAX17042=m.
> > +	  CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m.
> >   config INTEL_INT0002_VGPIO
> >   	tristate "Intel ACPI INT0002 Virtual GPIO driver"
> > 

Thanks,
diff mbox

Patch

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 8d21b9825d71..fce9f2ca0570 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -202,8 +202,7 @@  config I2C_CHT_WC
 
 	  Note this controller is hooked up to a TI bq24292i charger-IC,
 	  combined with a FUSB302 Type-C port-controller as such it is advised
-	  to also select CONFIG_CHARGER_BQ24190=m and CONFIG_TYPEC_FUSB302=m
-	  (the fusb302 driver currently is in drivers/staging).
+	  to also select CONFIG_TYPEC_FUSB302=m.
 
 config I2C_NFORCE2
 	tristate "Nvidia nForce2, nForce3 and nForce4"
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 39d06dd1f63a..1dbd9d547e60 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -866,6 +866,7 @@  config ACPI_CMPC
 config INTEL_CHT_INT33FE
 	tristate "Intel Cherry Trail ACPI INT33FE Driver"
 	depends on X86 && ACPI && I2C && REGULATOR
+	depends on CHARGER_BQ24190
 	---help---
 	  This driver add support for the INT33FE ACPI device found on
 	  some Intel Cherry Trail devices.
@@ -877,8 +878,7 @@  config INTEL_CHT_INT33FE
 	  i2c drivers for these chips can bind to the them.
 
 	  If you enable this driver it is advised to also select
-	  CONFIG_TYPEC_FUSB302=m, CONFIG_CHARGER_BQ24190=m and
-	  CONFIG_BATTERY_MAX17042=m.
+	  CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m.
 
 config INTEL_INT0002_VGPIO
 	tristate "Intel ACPI INT0002 Virtual GPIO driver"