| Message ID | 20180503012546.2170-2-famz@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, May 03, 2018 at 09:25:45AM +0800, Fam Zheng wrote: > HMP "info usernet" has been available but it isn't ideal for programmed > use cases. This closes the gap in QMP by adding a counterpart > "query-usernet" command. It is basically translated from > the HMP slirp_connection_info() loop, which now calls the QMP > implementation and prints the data, just like other HMP info_* commands. > > The TCPS_* macros are now defined as a QAPI enum. > > Signed-off-by: Fam Zheng <famz@redhat.com> > diff --git a/qapi/net.json b/qapi/net.json > index 9117c56972..83757d0ed0 100644 > --- a/qapi/net.json > +++ b/qapi/net.json > @@ -689,3 +689,217 @@ > ## > { 'event': 'NIC_RX_FILTER_CHANGED', > 'data': { '*name': 'str', 'path': 'str' } } > + > +## > +# @TCPS: > +# > +# TCP States of a SLIRP connection. > +# > +# - States where connections are not established: none, closed, listen, syn-sent, > +# syn-received > +# > +# - States where user has closed: fin-wait-1, closing, last-ack, fin-wait-2, > +# time-wait > +# > +# - States awaiting ACK of FIN: fin-wait-1, closing, last-ack > +# > +# 'none' state is used only when host forwarding > +# > +# Since 2.13 > +# > +## > +{ 'enum': 'TCPS', I'd suggest avoiding the abbreviation, IOW use TCPState as the name. Yes that will require changnig the constants in the SLIRP code, but that's worthwhile to get this QAPI naming clearer IMHO. I wonder if we should have a common prefix too eg UsernetTCPState as this is a global QAPI namespace after all . > + 'data': > + ['closed', > + 'listen', > + 'syn-sent', > + 'syn-received', > + 'established', > + 'close-wait', > + 'fin-wait-1', > + 'closing', > + 'last-ack', > + 'fin-wait-2', > + 'time-wait', > + 'none' > + ] } > + > +## > +# @UsernetTCPConnection: > +# > +# SLIRP TCP information. > +# > +# @state: tcp connection state > +# > +# @hostfwd: whether this connection has host port forwarding > +# > +# @fd: the file descriptor of the connection > +# > +# @src-addr: source address of host port forwarding > +# > +# @src-port: source port of host port forwarding > +# > +# @dest-addr: destination address of host port forwarding > +# > +# @dest-port: destination port of host port forwarding > +# > +# @recv-buffered: number of bytes queued in the receive buffer > +# > +# @send-buffered: number of bytes queued in the send buffer > +# > +# Since: 2.13 > +## > +{ 'struct': 'UsernetTCPConnection', > + 'data': { > + 'state': 'TCPS', > + 'hostfwd': 'bool', > + 'fd': 'int', > + 'src-addr': 'str', > + 'src-port': 'int', > + 'dest-addr': 'str', > + 'dest-port': 'int', > + 'recv-buffered': 'int', > + 'send-buffered': 'int' > + } } > + > +## > +# @UsernetUDPConnection: > +# > +# SLIRP UDP information. > +# > +# @hostfwd: whether this connection has host port forwarding > +# > +# @expire-time-ms: time in microseconds after which this connection will expire > +# > +# @fd: the file descriptor of the connection > +# > +# @src-addr: source address of host port forwarding > +# > +# @src-port: source port of host port forwarding > +# > +# @dest-addr: destination address of host port forwarding > +# > +# @dest-port: destination port of host port forwarding > +# > +# @recv-buffered: number of bytes queued in the receive buffer > +# > +# @send-buffered: number of bytes queued in the send buffer > +# > +# Since: 2.13 > +## > +{ 'struct': 'UsernetUDPConnection', > + 'data': { > + 'hostfwd': 'bool', > + 'expire-time-ms': 'int', > + 'fd': 'int', > + 'src-addr': 'str', > + 'src-port': 'int', > + 'dest-addr': 'str', > + 'dest-port': 'int', > + 'recv-buffered': 'int', > + 'send-buffered': 'int' > + } } > + > +## > +# @UsernetICMPConnection: > +# > +# SLIRP ICMP information. > +# > +# @expire-time-ms: time in microseconds after which this connection will expire > +# > +# @fd: the file descriptor of the connection > +# > +# @src-addr: source address of host port forwarding > +# > +# @dest-addr: destination address of host port forwarding > +# > +# @recv-buffered: number of bytes queued in the receive buffer > +# > +# @send-buffered: number of bytes queued in the send buffer > +# > +# Since: 2.13 > +## > +{ 'struct': 'UsernetICMPConnection', > + 'data': { > + 'expire-time-ms': 'int', > + 'fd': 'int', > + 'src-addr': 'str', > + 'dest-addr': 'str', > + 'recv-buffered': 'int', > + 'send-buffered': 'int' > + } } > + > +## > +# @UsernetType: > +# > +# Available netdev drivers. > +# > +# Since: 2.13 > +## > +{ 'enum': 'UsernetType', > + 'data': [ 'tcp', 'udp', 'icmp' ] } > + > +## > +# @UsernetConnection: > +# > +# SLIRP usernet connection information. > +# > +# Since: 2.13 > +## > +{ 'union': 'UsernetConnection', > + 'discriminator': 'type', > + 'base': { 'type': 'UsernetType' }, > + 'data': { > + 'tcp': 'UsernetTCPConnection', > + 'udp': 'UsernetUDPConnection', > + 'icmp': 'UsernetICMPConnection' > + } } > + > +## > +# @UsernetInfo: > +# > +# SLIRP usernet information. > +# > +# Since: 2.13 > +## > +{ 'struct': 'UsernetInfo', > + 'data': { > + 'id': 'str', > + 'hub': 'int', > + 'connections': ['UsernetConnection'] > +} } > + > +## > +# @query-usernet: > +# > +# Return SLIRP network information. > +# > +# Since: 2.13 > +# > +# Example: > +# > +# -> { "execute": "query-usernet", "arguments": { } } > +# <- { "return": [ > +# { > +# "hub": -1, > +# "connections": [ > +# { > +# "dest-addr": "10.0.2.15", > +# "recv-buffered": 0, > +# "src-port": 10022, > +# "state": "closed", > +# "fd": 16, > +# "src-addr": "*", > +# "send-buffered": 0, > +# "dest-port": 22, > +# "type": "tcp", > +# "hostfwd": true > +# } > +# ], > +# "id": "vnet" > +# } > +# ]} > +# > +## > +{ 'command': 'query-usernet', > + 'returns': ['UsernetInfo'] } > diff --git a/slirp/libslirp.h b/slirp/libslirp.h > index 540b3e5903..3ba361ea41 100644 > --- a/slirp/libslirp.h > +++ b/slirp/libslirp.h > @@ -2,6 +2,7 @@ > #define LIBSLIRP_H > > #include "qemu-common.h" > +#include "qapi/qapi-commands-net.h" > > typedef struct Slirp Slirp; > > @@ -37,6 +38,7 @@ int slirp_add_exec(Slirp *slirp, int do_pty, const void *args, > struct in_addr *guest_addr, int guest_port); > > void slirp_connection_info(Slirp *slirp, Monitor *mon); > +void usernet_get_info(Slirp *slirp, UsernetInfo *info); > > void slirp_socket_recv(Slirp *slirp, struct in_addr guest_addr, > int guest_port, const uint8_t *buf, int size); > diff --git a/slirp/misc.c b/slirp/misc.c > index 260187b6b6..335b49aad8 100644 > --- a/slirp/misc.c > +++ b/slirp/misc.c > @@ -205,39 +205,28 @@ fork_exec(struct socket *so, const char *ex, int do_pty) > } > #endif > > -void slirp_connection_info(Slirp *slirp, Monitor *mon) > +void usernet_get_info(Slirp *slirp, UsernetInfo *info) > { > - const char * const tcpstates[] = { > - [TCPS_CLOSED] = "CLOSED", > - [TCPS_LISTEN] = "LISTEN", > - [TCPS_SYN_SENT] = "SYN_SENT", > - [TCPS_SYN_RECEIVED] = "SYN_RCVD", > - [TCPS_ESTABLISHED] = "ESTABLISHED", > - [TCPS_CLOSE_WAIT] = "CLOSE_WAIT", > - [TCPS_FIN_WAIT_1] = "FIN_WAIT_1", > - [TCPS_CLOSING] = "CLOSING", > - [TCPS_LAST_ACK] = "LAST_ACK", > - [TCPS_FIN_WAIT_2] = "FIN_WAIT_2", > - [TCPS_TIME_WAIT] = "TIME_WAIT", > - }; > struct in_addr dst_addr; > struct sockaddr_in src; > socklen_t src_len; > uint16_t dst_port; > struct socket *so; > - const char *state; > - char buf[20]; > - > - monitor_printf(mon, " Protocol[State] FD Source Address Port " > - "Dest. Address Port RecvQ SendQ\n"); > + UsernetConnectionList **p_next = &info->connections; > > for (so = slirp->tcb.so_next; so != &slirp->tcb; so = so->so_next) { > + UsernetConnection *conn = g_new0(UsernetConnection, 1); > + UsernetTCPConnection *tcp = &conn->u.tcp; > + UsernetConnectionList *list = g_new0(UsernetConnectionList, 1); > + > + list->value = conn; > if (so->so_state & SS_HOSTFWD) { > - state = "HOST_FORWARD"; > + tcp->hostfwd = true; > + tcp->state = so->so_tcpcb->t_state; > } else if (so->so_tcpcb) { > - state = tcpstates[so->so_tcpcb->t_state]; > + tcp->state = so->so_tcpcb->t_state; > } else { > - state = "NONE"; > + tcp->state = TCPS_NONE; > } > if (so->so_state & (SS_HOSTFWD | SS_INCOMING)) { > src_len = sizeof(src); > @@ -250,46 +239,125 @@ void slirp_connection_info(Slirp *slirp, Monitor *mon) > dst_addr = so->so_faddr; > dst_port = so->so_fport; > } > - snprintf(buf, sizeof(buf), " TCP[%s]", state); > - monitor_printf(mon, "%-19s %3d %15s %5d ", buf, so->s, > - src.sin_addr.s_addr ? inet_ntoa(src.sin_addr) : "*", > - ntohs(src.sin_port)); > - monitor_printf(mon, "%15s %5d %5d %5d\n", > - inet_ntoa(dst_addr), ntohs(dst_port), > - so->so_rcv.sb_cc, so->so_snd.sb_cc); > + tcp->fd = so->s; > + tcp->src_addr = > + g_strdup(src.sin_addr.s_addr ? inet_ntoa(src.sin_addr) : "*"); > + tcp->src_port = ntohs(src.sin_port); > + tcp->dest_addr = g_strdup(inet_ntoa(dst_addr)); > + tcp->dest_port = ntohs(dst_port); > + tcp->recv_buffered = so->so_rcv.sb_cc; > + tcp->send_buffered = so->so_snd.sb_cc; > + *p_next = list; > + p_next = &list->next; > } > - > for (so = slirp->udb.so_next; so != &slirp->udb; so = so->so_next) { > + UsernetConnection *conn = g_new0(UsernetConnection, 1); > + UsernetUDPConnection *udp = &conn->u.udp; > + UsernetConnectionList *list = g_new0(UsernetConnectionList, 1); > + > + list->value = conn; > if (so->so_state & SS_HOSTFWD) { > - snprintf(buf, sizeof(buf), " UDP[HOST_FORWARD]"); > + udp->hostfwd = true; > src_len = sizeof(src); > getsockname(so->s, (struct sockaddr *)&src, &src_len); > dst_addr = so->so_laddr; > dst_port = so->so_lport; > } else { > - snprintf(buf, sizeof(buf), " UDP[%d sec]", > - (so->so_expire - curtime) / 1000); > + udp->expire_time_ms = so->so_expire - curtime; > src.sin_addr = so->so_laddr; > src.sin_port = so->so_lport; > dst_addr = so->so_faddr; > dst_port = so->so_fport; > } > - monitor_printf(mon, "%-19s %3d %15s %5d ", buf, so->s, > - src.sin_addr.s_addr ? inet_ntoa(src.sin_addr) : "*", > - ntohs(src.sin_port)); > - monitor_printf(mon, "%15s %5d %5d %5d\n", > - inet_ntoa(dst_addr), ntohs(dst_port), > - so->so_rcv.sb_cc, so->so_snd.sb_cc); > + udp->fd = so->s; > + udp->src_addr = > + g_strdup(src.sin_addr.s_addr ? inet_ntoa(src.sin_addr) : "*"); > + udp->src_port = ntohs(src.sin_port); > + udp->dest_addr = g_strdup(inet_ntoa(dst_addr)); > + udp->dest_port = ntohs(dst_port); > + udp->recv_buffered = so->so_rcv.sb_cc; > + udp->send_buffered = so->so_snd.sb_cc; > + *p_next = list; > + p_next = &list->next; > } > > for (so = slirp->icmp.so_next; so != &slirp->icmp; so = so->so_next) { > - snprintf(buf, sizeof(buf), " ICMP[%d sec]", > - (so->so_expire - curtime) / 1000); > + UsernetConnection *conn = g_new0(UsernetConnection, 1); > + UsernetICMPConnection *icmp = &conn->u.icmp; > + UsernetConnectionList *list = g_new0(UsernetConnectionList, 1); > + > + icmp->expire_time_ms = so->so_expire - curtime; > src.sin_addr = so->so_laddr; > dst_addr = so->so_faddr; > - monitor_printf(mon, "%-19s %3d %15s - ", buf, so->s, > - src.sin_addr.s_addr ? inet_ntoa(src.sin_addr) : "*"); > - monitor_printf(mon, "%15s - %5d %5d\n", inet_ntoa(dst_addr), > - so->so_rcv.sb_cc, so->so_snd.sb_cc); > + icmp->fd = so->s; > + icmp->src_addr = > + g_strdup(src.sin_addr.s_addr ? inet_ntoa(src.sin_addr) : "*"); > + icmp->dest_addr = g_strdup(inet_ntoa(dst_addr)); > + icmp->recv_buffered = so->so_rcv.sb_cc; > + icmp->send_buffered = so->so_snd.sb_cc; > + *p_next = list; > + p_next = &list->next; > } > } > + > + > +void slirp_connection_info(Slirp *slirp, Monitor *mon) > +{ > + const char *state; > + char buf[64]; > + UsernetInfo *info = g_new0(UsernetInfo, 1); > + UsernetConnectionList *cl; > + > + monitor_printf(mon, " Protocol[State] FD Source Address Port " > + "Dest. Address Port RecvQ SendQ\n"); > + > + usernet_get_info(slirp, info); > + for (cl = info->connections; cl && cl->value; cl = cl->next) { > + UsernetConnection *conn = cl->value; > + > + if (conn->type == USERNET_TYPE_TCP) { > + UsernetTCPConnection *tcp = &conn->u.tcp; > + > + if (tcp->hostfwd) { > + state = "HOST_FORWARD"; > + } else { > + state = TCPS_str(tcp->state); > + } > + snprintf(buf, sizeof(buf), " TCP[%s]", state); > + monitor_printf(mon, "%-19s %3" PRId64 " %15s %5" PRId64 " ", > + buf, tcp->fd, > + tcp->src_addr, tcp->src_port); > + monitor_printf(mon, "%15s %5" PRId64 " %5" PRId64 " %5" PRId64 "\n", > + tcp->dest_addr, tcp->dest_port, > + tcp->recv_buffered, tcp->send_buffered); > + } else if (conn->type == USERNET_TYPE_UDP) { > + UsernetUDPConnection *udp = &conn->u.udp; > + > + if (udp->hostfwd) { > + snprintf(buf, sizeof(buf), " UDP[HOST_FORWARD]"); > + } else { > + snprintf(buf, sizeof(buf), " UDP[%" PRId64 " sec]", > + udp->expire_time_ms / 1000); > + } > + monitor_printf(mon, "%-19s %3" PRId64 " %15s %5" PRId64 " ", > + buf, udp->fd, > + udp->src_addr, udp->src_port); > + monitor_printf(mon, "%15s %5" PRId64 " %5" PRId64 " %5" PRId64 "\n", > + udp->dest_addr, udp->dest_port, > + udp->recv_buffered, udp->send_buffered); > + } else { > + UsernetICMPConnection *icmp = &conn->u.icmp; > + > + assert(conn->type == USERNET_TYPE_ICMP); > + snprintf(buf, sizeof(buf), " ICMP[%" PRId64 " sec]", > + icmp->expire_time_ms / 1000); > + monitor_printf(mon, "%-19s %3" PRId64 " %15s - ", buf, icmp->fd, > + icmp->src_addr); > + monitor_printf(mon, "%15s - %5" PRId64 " %5" PRId64 "\n", > + icmp->dest_addr, > + icmp->recv_buffered, icmp->send_buffered); > + } > + } > + > + qapi_free_UsernetInfo(info); > +} > diff --git a/slirp/tcp.h b/slirp/tcp.h > index 174d3d960c..155569f380 100644 > --- a/slirp/tcp.h > +++ b/slirp/tcp.h > @@ -133,21 +133,6 @@ struct tcphdr { > > #define TCP_NSTATES 11 > > -#define TCPS_CLOSED 0 /* closed */ > -#define TCPS_LISTEN 1 /* listening for connection */ > -#define TCPS_SYN_SENT 2 /* active, have sent syn */ > -#define TCPS_SYN_RECEIVED 3 /* have send and received syn */ > -/* states < TCPS_ESTABLISHED are those where connections not established */ > -#define TCPS_ESTABLISHED 4 /* established */ > -#define TCPS_CLOSE_WAIT 5 /* rcvd fin, waiting for close */ > -/* states > TCPS_CLOSE_WAIT are those where user has closed */ > -#define TCPS_FIN_WAIT_1 6 /* have closed, sent fin */ > -#define TCPS_CLOSING 7 /* closed xchd FIN; await FIN ACK */ > -#define TCPS_LAST_ACK 8 /* had fin and close; await FIN ACK */ > -/* states > TCPS_CLOSE_WAIT && < TCPS_FIN_WAIT_2 await ACK of FIN */ > -#define TCPS_FIN_WAIT_2 9 /* have closed, fin is acked */ > -#define TCPS_TIME_WAIT 10 /* in 2*msl quiet wait after close */ > - > #define TCPS_HAVERCVDSYN(s) ((s) >= TCPS_SYN_RECEIVED) > #define TCPS_HAVEESTABLISHED(s) ((s) >= TCPS_ESTABLISHED) > #define TCPS_HAVERCVDFIN(s) ((s) >= TCPS_TIME_WAIT) > -- > 2.14.3 > > Regards, Daniel
On Thu, 05/03 10:12, Daniel P. Berrangé wrote: > On Thu, May 03, 2018 at 09:25:45AM +0800, Fam Zheng wrote: > > HMP "info usernet" has been available but it isn't ideal for programmed > > use cases. This closes the gap in QMP by adding a counterpart > > "query-usernet" command. It is basically translated from > > the HMP slirp_connection_info() loop, which now calls the QMP > > implementation and prints the data, just like other HMP info_* commands. > > > > The TCPS_* macros are now defined as a QAPI enum. > > > > Signed-off-by: Fam Zheng <famz@redhat.com> > > > > diff --git a/qapi/net.json b/qapi/net.json > > index 9117c56972..83757d0ed0 100644 > > --- a/qapi/net.json > > +++ b/qapi/net.json > > @@ -689,3 +689,217 @@ > > ## > > { 'event': 'NIC_RX_FILTER_CHANGED', > > 'data': { '*name': 'str', 'path': 'str' } } > > + > > +## > > +# @TCPS: > > +# > > +# TCP States of a SLIRP connection. > > +# > > +# - States where connections are not established: none, closed, listen, syn-sent, > > +# syn-received > > +# > > +# - States where user has closed: fin-wait-1, closing, last-ack, fin-wait-2, > > +# time-wait > > +# > > +# - States awaiting ACK of FIN: fin-wait-1, closing, last-ack > > +# > > +# 'none' state is used only when host forwarding > > +# > > +# Since 2.13 > > +# > > +## > > +{ 'enum': 'TCPS', > > I'd suggest avoiding the abbreviation, IOW use TCPState as > the name. Yes that will require changnig the constants in > the SLIRP code, but that's worthwhile to get this QAPI > naming clearer IMHO. > Yes, it feels cleaner to me. I wanted to keep this patch short-ish but that change can be split into a separate patch which introduces the QAPI enum and replaces the TCPS_ macros. I will do it in v6, thanks. Fam > I wonder if we should have a common prefix too eg UsernetTCPState > as this is a global QAPI namespace after all . > > > + 'data': > > + ['closed', > > + 'listen', > > + 'syn-sent', > > + 'syn-received', > > + 'established', > > + 'close-wait', > > + 'fin-wait-1', > > + 'closing', > > + 'last-ack', > > + 'fin-wait-2', > > + 'time-wait', > > + 'none' > > + ] } > > + > > +## > > +# @UsernetTCPConnection: > > +# > > +# SLIRP TCP information. > > +# > > +# @state: tcp connection state > > +# > > +# @hostfwd: whether this connection has host port forwarding > > +# > > +# @fd: the file descriptor of the connection > > +# > > +# @src-addr: source address of host port forwarding > > +# > > +# @src-port: source port of host port forwarding > > +# > > +# @dest-addr: destination address of host port forwarding > > +# > > +# @dest-port: destination port of host port forwarding > > +# > > +# @recv-buffered: number of bytes queued in the receive buffer > > +# > > +# @send-buffered: number of bytes queued in the send buffer > > +# > > +# Since: 2.13 > > +## > > +{ 'struct': 'UsernetTCPConnection', > > + 'data': { > > + 'state': 'TCPS', > > + 'hostfwd': 'bool', > > + 'fd': 'int', > > + 'src-addr': 'str', > > + 'src-port': 'int', > > + 'dest-addr': 'str', > > + 'dest-port': 'int', > > + 'recv-buffered': 'int', > > + 'send-buffered': 'int' > > + } } > > + > > +## > > +# @UsernetUDPConnection: > > +# > > +# SLIRP UDP information. > > +# > > +# @hostfwd: whether this connection has host port forwarding > > +# > > +# @expire-time-ms: time in microseconds after which this connection will expire > > +# > > +# @fd: the file descriptor of the connection > > +# > > +# @src-addr: source address of host port forwarding > > +# > > +# @src-port: source port of host port forwarding > > +# > > +# @dest-addr: destination address of host port forwarding > > +# > > +# @dest-port: destination port of host port forwarding > > +# > > +# @recv-buffered: number of bytes queued in the receive buffer > > +# > > +# @send-buffered: number of bytes queued in the send buffer > > +# > > +# Since: 2.13 > > +## > > +{ 'struct': 'UsernetUDPConnection', > > + 'data': { > > + 'hostfwd': 'bool', > > + 'expire-time-ms': 'int', > > + 'fd': 'int', > > + 'src-addr': 'str', > > + 'src-port': 'int', > > + 'dest-addr': 'str', > > + 'dest-port': 'int', > > + 'recv-buffered': 'int', > > + 'send-buffered': 'int' > > + } } > > + > > +## > > +# @UsernetICMPConnection: > > +# > > +# SLIRP ICMP information. > > +# > > +# @expire-time-ms: time in microseconds after which this connection will expire > > +# > > +# @fd: the file descriptor of the connection > > +# > > +# @src-addr: source address of host port forwarding > > +# > > +# @dest-addr: destination address of host port forwarding > > +# > > +# @recv-buffered: number of bytes queued in the receive buffer > > +# > > +# @send-buffered: number of bytes queued in the send buffer > > +# > > +# Since: 2.13 > > +## > > +{ 'struct': 'UsernetICMPConnection', > > + 'data': { > > + 'expire-time-ms': 'int', > > + 'fd': 'int', > > + 'src-addr': 'str', > > + 'dest-addr': 'str', > > + 'recv-buffered': 'int', > > + 'send-buffered': 'int' > > + } } > > + > > +## > > +# @UsernetType: > > +# > > +# Available netdev drivers. > > +# > > +# Since: 2.13 > > +## > > +{ 'enum': 'UsernetType', > > + 'data': [ 'tcp', 'udp', 'icmp' ] } > > + > > +## > > +# @UsernetConnection: > > +# > > +# SLIRP usernet connection information. > > +# > > +# Since: 2.13 > > +## > > +{ 'union': 'UsernetConnection', > > + 'discriminator': 'type', > > + 'base': { 'type': 'UsernetType' }, > > + 'data': { > > + 'tcp': 'UsernetTCPConnection', > > + 'udp': 'UsernetUDPConnection', > > + 'icmp': 'UsernetICMPConnection' > > + } } > > + > > +## > > +# @UsernetInfo: > > +# > > +# SLIRP usernet information. > > +# > > +# Since: 2.13 > > +## > > +{ 'struct': 'UsernetInfo', > > + 'data': { > > + 'id': 'str', > > + 'hub': 'int', > > + 'connections': ['UsernetConnection'] > > +} } > > + > > +## > > +# @query-usernet: > > +# > > +# Return SLIRP network information. > > +# > > +# Since: 2.13 > > +# > > +# Example: > > +# > > +# -> { "execute": "query-usernet", "arguments": { } } > > +# <- { "return": [ > > +# { > > +# "hub": -1, > > +# "connections": [ > > +# { > > +# "dest-addr": "10.0.2.15", > > +# "recv-buffered": 0, > > +# "src-port": 10022, > > +# "state": "closed", > > +# "fd": 16, > > +# "src-addr": "*", > > +# "send-buffered": 0, > > +# "dest-port": 22, > > +# "type": "tcp", > > +# "hostfwd": true > > +# } > > +# ], > > +# "id": "vnet" > > +# } > > +# ]} > > +# > > +## > > +{ 'command': 'query-usernet', > > + 'returns': ['UsernetInfo'] } > > diff --git a/slirp/libslirp.h b/slirp/libslirp.h > > index 540b3e5903..3ba361ea41 100644 > > --- a/slirp/libslirp.h > > +++ b/slirp/libslirp.h > > @@ -2,6 +2,7 @@ > > #define LIBSLIRP_H > > > > #include "qemu-common.h" > > +#include "qapi/qapi-commands-net.h" > > > > typedef struct Slirp Slirp; > > > > @@ -37,6 +38,7 @@ int slirp_add_exec(Slirp *slirp, int do_pty, const void *args, > > struct in_addr *guest_addr, int guest_port); > > > > void slirp_connection_info(Slirp *slirp, Monitor *mon); > > +void usernet_get_info(Slirp *slirp, UsernetInfo *info); > > > > void slirp_socket_recv(Slirp *slirp, struct in_addr guest_addr, > > int guest_port, const uint8_t *buf, int size); > > diff --git a/slirp/misc.c b/slirp/misc.c > > index 260187b6b6..335b49aad8 100644 > > --- a/slirp/misc.c > > +++ b/slirp/misc.c > > @@ -205,39 +205,28 @@ fork_exec(struct socket *so, const char *ex, int do_pty) > > } > > #endif > > > > -void slirp_connection_info(Slirp *slirp, Monitor *mon) > > +void usernet_get_info(Slirp *slirp, UsernetInfo *info) > > { > > - const char * const tcpstates[] = { > > - [TCPS_CLOSED] = "CLOSED", > > - [TCPS_LISTEN] = "LISTEN", > > - [TCPS_SYN_SENT] = "SYN_SENT", > > - [TCPS_SYN_RECEIVED] = "SYN_RCVD", > > - [TCPS_ESTABLISHED] = "ESTABLISHED", > > - [TCPS_CLOSE_WAIT] = "CLOSE_WAIT", > > - [TCPS_FIN_WAIT_1] = "FIN_WAIT_1", > > - [TCPS_CLOSING] = "CLOSING", > > - [TCPS_LAST_ACK] = "LAST_ACK", > > - [TCPS_FIN_WAIT_2] = "FIN_WAIT_2", > > - [TCPS_TIME_WAIT] = "TIME_WAIT", > > - }; > > struct in_addr dst_addr; > > struct sockaddr_in src; > > socklen_t src_len; > > uint16_t dst_port; > > struct socket *so; > > - const char *state; > > - char buf[20]; > > - > > - monitor_printf(mon, " Protocol[State] FD Source Address Port " > > - "Dest. Address Port RecvQ SendQ\n"); > > + UsernetConnectionList **p_next = &info->connections; > > > > for (so = slirp->tcb.so_next; so != &slirp->tcb; so = so->so_next) { > > + UsernetConnection *conn = g_new0(UsernetConnection, 1); > > + UsernetTCPConnection *tcp = &conn->u.tcp; > > + UsernetConnectionList *list = g_new0(UsernetConnectionList, 1); > > + > > + list->value = conn; > > if (so->so_state & SS_HOSTFWD) { > > - state = "HOST_FORWARD"; > > + tcp->hostfwd = true; > > + tcp->state = so->so_tcpcb->t_state; > > } else if (so->so_tcpcb) { > > - state = tcpstates[so->so_tcpcb->t_state]; > > + tcp->state = so->so_tcpcb->t_state; > > } else { > > - state = "NONE"; > > + tcp->state = TCPS_NONE; > > } > > if (so->so_state & (SS_HOSTFWD | SS_INCOMING)) { > > src_len = sizeof(src); > > @@ -250,46 +239,125 @@ void slirp_connection_info(Slirp *slirp, Monitor *mon) > > dst_addr = so->so_faddr; > > dst_port = so->so_fport; > > } > > - snprintf(buf, sizeof(buf), " TCP[%s]", state); > > - monitor_printf(mon, "%-19s %3d %15s %5d ", buf, so->s, > > - src.sin_addr.s_addr ? inet_ntoa(src.sin_addr) : "*", > > - ntohs(src.sin_port)); > > - monitor_printf(mon, "%15s %5d %5d %5d\n", > > - inet_ntoa(dst_addr), ntohs(dst_port), > > - so->so_rcv.sb_cc, so->so_snd.sb_cc); > > + tcp->fd = so->s; > > + tcp->src_addr = > > + g_strdup(src.sin_addr.s_addr ? inet_ntoa(src.sin_addr) : "*"); > > + tcp->src_port = ntohs(src.sin_port); > > + tcp->dest_addr = g_strdup(inet_ntoa(dst_addr)); > > + tcp->dest_port = ntohs(dst_port); > > + tcp->recv_buffered = so->so_rcv.sb_cc; > > + tcp->send_buffered = so->so_snd.sb_cc; > > + *p_next = list; > > + p_next = &list->next; > > } > > - > > for (so = slirp->udb.so_next; so != &slirp->udb; so = so->so_next) { > > + UsernetConnection *conn = g_new0(UsernetConnection, 1); > > + UsernetUDPConnection *udp = &conn->u.udp; > > + UsernetConnectionList *list = g_new0(UsernetConnectionList, 1); > > + > > + list->value = conn; > > if (so->so_state & SS_HOSTFWD) { > > - snprintf(buf, sizeof(buf), " UDP[HOST_FORWARD]"); > > + udp->hostfwd = true; > > src_len = sizeof(src); > > getsockname(so->s, (struct sockaddr *)&src, &src_len); > > dst_addr = so->so_laddr; > > dst_port = so->so_lport; > > } else { > > - snprintf(buf, sizeof(buf), " UDP[%d sec]", > > - (so->so_expire - curtime) / 1000); > > + udp->expire_time_ms = so->so_expire - curtime; > > src.sin_addr = so->so_laddr; > > src.sin_port = so->so_lport; > > dst_addr = so->so_faddr; > > dst_port = so->so_fport; > > } > > - monitor_printf(mon, "%-19s %3d %15s %5d ", buf, so->s, > > - src.sin_addr.s_addr ? inet_ntoa(src.sin_addr) : "*", > > - ntohs(src.sin_port)); > > - monitor_printf(mon, "%15s %5d %5d %5d\n", > > - inet_ntoa(dst_addr), ntohs(dst_port), > > - so->so_rcv.sb_cc, so->so_snd.sb_cc); > > + udp->fd = so->s; > > + udp->src_addr = > > + g_strdup(src.sin_addr.s_addr ? inet_ntoa(src.sin_addr) : "*"); > > + udp->src_port = ntohs(src.sin_port); > > + udp->dest_addr = g_strdup(inet_ntoa(dst_addr)); > > + udp->dest_port = ntohs(dst_port); > > + udp->recv_buffered = so->so_rcv.sb_cc; > > + udp->send_buffered = so->so_snd.sb_cc; > > + *p_next = list; > > + p_next = &list->next; > > } > > > > for (so = slirp->icmp.so_next; so != &slirp->icmp; so = so->so_next) { > > - snprintf(buf, sizeof(buf), " ICMP[%d sec]", > > - (so->so_expire - curtime) / 1000); > > + UsernetConnection *conn = g_new0(UsernetConnection, 1); > > + UsernetICMPConnection *icmp = &conn->u.icmp; > > + UsernetConnectionList *list = g_new0(UsernetConnectionList, 1); > > + > > + icmp->expire_time_ms = so->so_expire - curtime; > > src.sin_addr = so->so_laddr; > > dst_addr = so->so_faddr; > > - monitor_printf(mon, "%-19s %3d %15s - ", buf, so->s, > > - src.sin_addr.s_addr ? inet_ntoa(src.sin_addr) : "*"); > > - monitor_printf(mon, "%15s - %5d %5d\n", inet_ntoa(dst_addr), > > - so->so_rcv.sb_cc, so->so_snd.sb_cc); > > + icmp->fd = so->s; > > + icmp->src_addr = > > + g_strdup(src.sin_addr.s_addr ? inet_ntoa(src.sin_addr) : "*"); > > + icmp->dest_addr = g_strdup(inet_ntoa(dst_addr)); > > + icmp->recv_buffered = so->so_rcv.sb_cc; > > + icmp->send_buffered = so->so_snd.sb_cc; > > + *p_next = list; > > + p_next = &list->next; > > } > > } > > + > > + > > +void slirp_connection_info(Slirp *slirp, Monitor *mon) > > +{ > > + const char *state; > > + char buf[64]; > > + UsernetInfo *info = g_new0(UsernetInfo, 1); > > + UsernetConnectionList *cl; > > + > > + monitor_printf(mon, " Protocol[State] FD Source Address Port " > > + "Dest. Address Port RecvQ SendQ\n"); > > + > > + usernet_get_info(slirp, info); > > + for (cl = info->connections; cl && cl->value; cl = cl->next) { > > + UsernetConnection *conn = cl->value; > > + > > + if (conn->type == USERNET_TYPE_TCP) { > > + UsernetTCPConnection *tcp = &conn->u.tcp; > > + > > + if (tcp->hostfwd) { > > + state = "HOST_FORWARD"; > > + } else { > > + state = TCPS_str(tcp->state); > > + } > > + snprintf(buf, sizeof(buf), " TCP[%s]", state); > > + monitor_printf(mon, "%-19s %3" PRId64 " %15s %5" PRId64 " ", > > + buf, tcp->fd, > > + tcp->src_addr, tcp->src_port); > > + monitor_printf(mon, "%15s %5" PRId64 " %5" PRId64 " %5" PRId64 "\n", > > + tcp->dest_addr, tcp->dest_port, > > + tcp->recv_buffered, tcp->send_buffered); > > + } else if (conn->type == USERNET_TYPE_UDP) { > > + UsernetUDPConnection *udp = &conn->u.udp; > > + > > + if (udp->hostfwd) { > > + snprintf(buf, sizeof(buf), " UDP[HOST_FORWARD]"); > > + } else { > > + snprintf(buf, sizeof(buf), " UDP[%" PRId64 " sec]", > > + udp->expire_time_ms / 1000); > > + } > > + monitor_printf(mon, "%-19s %3" PRId64 " %15s %5" PRId64 " ", > > + buf, udp->fd, > > + udp->src_addr, udp->src_port); > > + monitor_printf(mon, "%15s %5" PRId64 " %5" PRId64 " %5" PRId64 "\n", > > + udp->dest_addr, udp->dest_port, > > + udp->recv_buffered, udp->send_buffered); > > + } else { > > + UsernetICMPConnection *icmp = &conn->u.icmp; > > + > > + assert(conn->type == USERNET_TYPE_ICMP); > > + snprintf(buf, sizeof(buf), " ICMP[%" PRId64 " sec]", > > + icmp->expire_time_ms / 1000); > > + monitor_printf(mon, "%-19s %3" PRId64 " %15s - ", buf, icmp->fd, > > + icmp->src_addr); > > + monitor_printf(mon, "%15s - %5" PRId64 " %5" PRId64 "\n", > > + icmp->dest_addr, > > + icmp->recv_buffered, icmp->send_buffered); > > + } > > + } > > + > > + qapi_free_UsernetInfo(info); > > +} > > diff --git a/slirp/tcp.h b/slirp/tcp.h > > index 174d3d960c..155569f380 100644 > > --- a/slirp/tcp.h > > +++ b/slirp/tcp.h > > @@ -133,21 +133,6 @@ struct tcphdr { > > > > #define TCP_NSTATES 11 > > > > -#define TCPS_CLOSED 0 /* closed */ > > -#define TCPS_LISTEN 1 /* listening for connection */ > > -#define TCPS_SYN_SENT 2 /* active, have sent syn */ > > -#define TCPS_SYN_RECEIVED 3 /* have send and received syn */ > > -/* states < TCPS_ESTABLISHED are those where connections not established */ > > -#define TCPS_ESTABLISHED 4 /* established */ > > -#define TCPS_CLOSE_WAIT 5 /* rcvd fin, waiting for close */ > > -/* states > TCPS_CLOSE_WAIT are those where user has closed */ > > -#define TCPS_FIN_WAIT_1 6 /* have closed, sent fin */ > > -#define TCPS_CLOSING 7 /* closed xchd FIN; await FIN ACK */ > > -#define TCPS_LAST_ACK 8 /* had fin and close; await FIN ACK */ > > -/* states > TCPS_CLOSE_WAIT && < TCPS_FIN_WAIT_2 await ACK of FIN */ > > -#define TCPS_FIN_WAIT_2 9 /* have closed, fin is acked */ > > -#define TCPS_TIME_WAIT 10 /* in 2*msl quiet wait after close */ > > - > > #define TCPS_HAVERCVDSYN(s) ((s) >= TCPS_SYN_RECEIVED) > > #define TCPS_HAVEESTABLISHED(s) ((s) >= TCPS_ESTABLISHED) > > #define TCPS_HAVERCVDFIN(s) ((s) >= TCPS_TIME_WAIT) > > -- > > 2.14.3 > > > > > > Regards, > Daniel > -- > |: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| > |: https://libvirt.org -o- https://fstop138.berrange.com :| > |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
On 05/03/2018 04:12 AM, Daniel P. Berrangé wrote: > On Thu, May 03, 2018 at 09:25:45AM +0800, Fam Zheng wrote: >> HMP "info usernet" has been available but it isn't ideal for programmed >> use cases. This closes the gap in QMP by adding a counterpart >> "query-usernet" command. It is basically translated from >> the HMP slirp_connection_info() loop, which now calls the QMP >> implementation and prints the data, just like other HMP info_* commands. >> >> The TCPS_* macros are now defined as a QAPI enum. >> >> Signed-off-by: Fam Zheng <famz@redhat.com> > >> +## >> +{ 'enum': 'TCPS', > > I'd suggest avoiding the abbreviation, IOW use TCPState as > the name. Yes that will require changnig the constants in > the SLIRP code, but that's worthwhile to get this QAPI > naming clearer IMHO. > > I wonder if we should have a common prefix too eg UsernetTCPState > as this is a global QAPI namespace after all . You could also use { 'enum': 'UsernetTCPState', 'prefix': 'TCPS', ... for minimizing code churn (if 'prefix' is present, that overrides what the generator would use for enum values); although I'm not sure if that is any better (we haven't used 'prefix' much, and Markus wasn't the biggest fan of it in the first place, as it is more of a hack).
Eric Blake <eblake@redhat.com> writes: > On 05/03/2018 04:12 AM, Daniel P. Berrangé wrote: >> On Thu, May 03, 2018 at 09:25:45AM +0800, Fam Zheng wrote: >>> HMP "info usernet" has been available but it isn't ideal for programmed >>> use cases. This closes the gap in QMP by adding a counterpart >>> "query-usernet" command. It is basically translated from >>> the HMP slirp_connection_info() loop, which now calls the QMP >>> implementation and prints the data, just like other HMP info_* commands. >>> >>> The TCPS_* macros are now defined as a QAPI enum. >>> >>> Signed-off-by: Fam Zheng <famz@redhat.com> >> > >>> +## >>> +{ 'enum': 'TCPS', >> >> I'd suggest avoiding the abbreviation, IOW use TCPState as >> the name. Yes that will require changnig the constants in >> the SLIRP code, but that's worthwhile to get this QAPI >> naming clearer IMHO. >> >> I wonder if we should have a common prefix too eg UsernetTCPState >> as this is a global QAPI namespace after all . > > You could also use > > { 'enum': 'UsernetTCPState', 'prefix': 'TCPS', ... > > for minimizing code churn (if 'prefix' is present, that overrides what > the generator would use for enum values); although I'm not sure if > that is any better (we haven't used 'prefix' much, and Markus wasn't > the biggest fan of it in the first place, as it is more of a hack). Please avoid 'prefix' unless you have a really, really good reason to use it. $ git-grep TCPS_ | wc -l 99 doesn't look like one.
diff --git a/net/slirp.c b/net/slirp.c index 8991816bbf..9c48a882ec 100644 --- a/net/slirp.c +++ b/net/slirp.c @@ -36,6 +36,7 @@ #include "monitor/monitor.h" #include "qemu/error-report.h" #include "qemu/sockets.h" +#include "slirp/slirp.h" #include "slirp/libslirp.h" #include "slirp/ip6.h" #include "chardev/char-fe.h" @@ -43,6 +44,7 @@ #include "qemu/cutils.h" #include "qapi/error.h" #include "qapi/qmp/qdict.h" +#include "qapi/qapi-commands-net.h" static int get_str_sep(char *buf, int buf_size, const char **pp, int sep) { @@ -864,6 +866,30 @@ static int slirp_guestfwd(SlirpState *s, const char *config_str, return -1; } +UsernetInfoList *qmp_query_usernet(Error **errp) +{ + SlirpState *s; + UsernetInfoList *list = NULL; + UsernetInfoList **p = &list; + + QTAILQ_FOREACH(s, &slirp_stacks, entry) { + int hub; + UsernetInfoList *il = g_new0(UsernetInfoList, 1); + UsernetInfo *info = il->value = g_new0(UsernetInfo, 1); + + info->id = g_strdup(s->nc.name); + if (!net_hub_id_for_client(&s->nc, &hub)) { + info->hub = hub; + } else { + info->hub = -1; + } + usernet_get_info(s->slirp, info); + *p = il; + p = &il->next; + } + return list; +} + void hmp_info_usernet(Monitor *mon, const QDict *qdict) { SlirpState *s; diff --git a/qapi/net.json b/qapi/net.json index 9117c56972..83757d0ed0 100644 --- a/qapi/net.json +++ b/qapi/net.json @@ -689,3 +689,217 @@ ## { 'event': 'NIC_RX_FILTER_CHANGED', 'data': { '*name': 'str', 'path': 'str' } } + +## +# @TCPS: +# +# TCP States of a SLIRP connection. +# +# - States where connections are not established: none, closed, listen, syn-sent, +# syn-received +# +# - States where user has closed: fin-wait-1, closing, last-ack, fin-wait-2, +# time-wait +# +# - States awaiting ACK of FIN: fin-wait-1, closing, last-ack +# +# 'none' state is used only when host forwarding +# +# Since 2.13 +# +## +{ 'enum': 'TCPS', + 'data': + ['closed', + 'listen', + 'syn-sent', + 'syn-received', + 'established', + 'close-wait', + 'fin-wait-1', + 'closing', + 'last-ack', + 'fin-wait-2', + 'time-wait', + 'none' + ] } + +## +# @UsernetTCPConnection: +# +# SLIRP TCP information. +# +# @state: tcp connection state +# +# @hostfwd: whether this connection has host port forwarding +# +# @fd: the file descriptor of the connection +# +# @src-addr: source address of host port forwarding +# +# @src-port: source port of host port forwarding +# +# @dest-addr: destination address of host port forwarding +# +# @dest-port: destination port of host port forwarding +# +# @recv-buffered: number of bytes queued in the receive buffer +# +# @send-buffered: number of bytes queued in the send buffer +# +# Since: 2.13 +## +{ 'struct': 'UsernetTCPConnection', + 'data': { + 'state': 'TCPS', + 'hostfwd': 'bool', + 'fd': 'int', + 'src-addr': 'str', + 'src-port': 'int', + 'dest-addr': 'str', + 'dest-port': 'int', + 'recv-buffered': 'int', + 'send-buffered': 'int' + } } + +## +# @UsernetUDPConnection: +# +# SLIRP UDP information. +# +# @hostfwd: whether this connection has host port forwarding +# +# @expire-time-ms: time in microseconds after which this connection will expire +# +# @fd: the file descriptor of the connection +# +# @src-addr: source address of host port forwarding +# +# @src-port: source port of host port forwarding +# +# @dest-addr: destination address of host port forwarding +# +# @dest-port: destination port of host port forwarding +# +# @recv-buffered: number of bytes queued in the receive buffer +# +# @send-buffered: number of bytes queued in the send buffer +# +# Since: 2.13 +## +{ 'struct': 'UsernetUDPConnection', + 'data': { + 'hostfwd': 'bool', + 'expire-time-ms': 'int', + 'fd': 'int', + 'src-addr': 'str', + 'src-port': 'int', + 'dest-addr': 'str', + 'dest-port': 'int', + 'recv-buffered': 'int', + 'send-buffered': 'int' + } } + +## +# @UsernetICMPConnection: +# +# SLIRP ICMP information. +# +# @expire-time-ms: time in microseconds after which this connection will expire +# +# @fd: the file descriptor of the connection +# +# @src-addr: source address of host port forwarding +# +# @dest-addr: destination address of host port forwarding +# +# @recv-buffered: number of bytes queued in the receive buffer +# +# @send-buffered: number of bytes queued in the send buffer +# +# Since: 2.13 +## +{ 'struct': 'UsernetICMPConnection', + 'data': { + 'expire-time-ms': 'int', + 'fd': 'int', + 'src-addr': 'str', + 'dest-addr': 'str', + 'recv-buffered': 'int', + 'send-buffered': 'int' + } } + +## +# @UsernetType: +# +# Available netdev drivers. +# +# Since: 2.13 +## +{ 'enum': 'UsernetType', + 'data': [ 'tcp', 'udp', 'icmp' ] } + +## +# @UsernetConnection: +# +# SLIRP usernet connection information. +# +# Since: 2.13 +## +{ 'union': 'UsernetConnection', + 'discriminator': 'type', + 'base': { 'type': 'UsernetType' }, + 'data': { + 'tcp': 'UsernetTCPConnection', + 'udp': 'UsernetUDPConnection', + 'icmp': 'UsernetICMPConnection' + } } + +## +# @UsernetInfo: +# +# SLIRP usernet information. +# +# Since: 2.13 +## +{ 'struct': 'UsernetInfo', + 'data': { + 'id': 'str', + 'hub': 'int', + 'connections': ['UsernetConnection'] +} } + +## +# @query-usernet: +# +# Return SLIRP network information. +# +# Since: 2.13 +# +# Example: +# +# -> { "execute": "query-usernet", "arguments": { } } +# <- { "return": [ +# { +# "hub": -1, +# "connections": [ +# { +# "dest-addr": "10.0.2.15", +# "recv-buffered": 0, +# "src-port": 10022, +# "state": "closed", +# "fd": 16, +# "src-addr": "*", +# "send-buffered": 0, +# "dest-port": 22, +# "type": "tcp", +# "hostfwd": true +# } +# ], +# "id": "vnet" +# } +# ]} +# +## +{ 'command': 'query-usernet', + 'returns': ['UsernetInfo'] } diff --git a/slirp/libslirp.h b/slirp/libslirp.h index 540b3e5903..3ba361ea41 100644 --- a/slirp/libslirp.h +++ b/slirp/libslirp.h @@ -2,6 +2,7 @@ #define LIBSLIRP_H #include "qemu-common.h" +#include "qapi/qapi-commands-net.h" typedef struct Slirp Slirp; @@ -37,6 +38,7 @@ int slirp_add_exec(Slirp *slirp, int do_pty, const void *args, struct in_addr *guest_addr, int guest_port); void slirp_connection_info(Slirp *slirp, Monitor *mon); +void usernet_get_info(Slirp *slirp, UsernetInfo *info); void slirp_socket_recv(Slirp *slirp, struct in_addr guest_addr, int guest_port, const uint8_t *buf, int size); diff --git a/slirp/misc.c b/slirp/misc.c index 260187b6b6..335b49aad8 100644 --- a/slirp/misc.c +++ b/slirp/misc.c @@ -205,39 +205,28 @@ fork_exec(struct socket *so, const char *ex, int do_pty) } #endif -void slirp_connection_info(Slirp *slirp, Monitor *mon) +void usernet_get_info(Slirp *slirp, UsernetInfo *info) { - const char * const tcpstates[] = { - [TCPS_CLOSED] = "CLOSED", - [TCPS_LISTEN] = "LISTEN", - [TCPS_SYN_SENT] = "SYN_SENT", - [TCPS_SYN_RECEIVED] = "SYN_RCVD", - [TCPS_ESTABLISHED] = "ESTABLISHED", - [TCPS_CLOSE_WAIT] = "CLOSE_WAIT", - [TCPS_FIN_WAIT_1] = "FIN_WAIT_1", - [TCPS_CLOSING] = "CLOSING", - [TCPS_LAST_ACK] = "LAST_ACK", - [TCPS_FIN_WAIT_2] = "FIN_WAIT_2", - [TCPS_TIME_WAIT] = "TIME_WAIT", - }; struct in_addr dst_addr; struct sockaddr_in src; socklen_t src_len; uint16_t dst_port; struct socket *so; - const char *state; - char buf[20]; - - monitor_printf(mon, " Protocol[State] FD Source Address Port " - "Dest. Address Port RecvQ SendQ\n"); + UsernetConnectionList **p_next = &info->connections; for (so = slirp->tcb.so_next; so != &slirp->tcb; so = so->so_next) { + UsernetConnection *conn = g_new0(UsernetConnection, 1); + UsernetTCPConnection *tcp = &conn->u.tcp; + UsernetConnectionList *list = g_new0(UsernetConnectionList, 1); + + list->value = conn; if (so->so_state & SS_HOSTFWD) { - state = "HOST_FORWARD"; + tcp->hostfwd = true; + tcp->state = so->so_tcpcb->t_state; } else if (so->so_tcpcb) { - state = tcpstates[so->so_tcpcb->t_state]; + tcp->state = so->so_tcpcb->t_state; } else { - state = "NONE"; + tcp->state = TCPS_NONE; } if (so->so_state & (SS_HOSTFWD | SS_INCOMING)) { src_len = sizeof(src); @@ -250,46 +239,125 @@ void slirp_connection_info(Slirp *slirp, Monitor *mon) dst_addr = so->so_faddr; dst_port = so->so_fport; } - snprintf(buf, sizeof(buf), " TCP[%s]", state); - monitor_printf(mon, "%-19s %3d %15s %5d ", buf, so->s, - src.sin_addr.s_addr ? inet_ntoa(src.sin_addr) : "*", - ntohs(src.sin_port)); - monitor_printf(mon, "%15s %5d %5d %5d\n", - inet_ntoa(dst_addr), ntohs(dst_port), - so->so_rcv.sb_cc, so->so_snd.sb_cc); + tcp->fd = so->s; + tcp->src_addr = + g_strdup(src.sin_addr.s_addr ? inet_ntoa(src.sin_addr) : "*"); + tcp->src_port = ntohs(src.sin_port); + tcp->dest_addr = g_strdup(inet_ntoa(dst_addr)); + tcp->dest_port = ntohs(dst_port); + tcp->recv_buffered = so->so_rcv.sb_cc; + tcp->send_buffered = so->so_snd.sb_cc; + *p_next = list; + p_next = &list->next; } - for (so = slirp->udb.so_next; so != &slirp->udb; so = so->so_next) { + UsernetConnection *conn = g_new0(UsernetConnection, 1); + UsernetUDPConnection *udp = &conn->u.udp; + UsernetConnectionList *list = g_new0(UsernetConnectionList, 1); + + list->value = conn; if (so->so_state & SS_HOSTFWD) { - snprintf(buf, sizeof(buf), " UDP[HOST_FORWARD]"); + udp->hostfwd = true; src_len = sizeof(src); getsockname(so->s, (struct sockaddr *)&src, &src_len); dst_addr = so->so_laddr; dst_port = so->so_lport; } else { - snprintf(buf, sizeof(buf), " UDP[%d sec]", - (so->so_expire - curtime) / 1000); + udp->expire_time_ms = so->so_expire - curtime; src.sin_addr = so->so_laddr; src.sin_port = so->so_lport; dst_addr = so->so_faddr; dst_port = so->so_fport; } - monitor_printf(mon, "%-19s %3d %15s %5d ", buf, so->s, - src.sin_addr.s_addr ? inet_ntoa(src.sin_addr) : "*", - ntohs(src.sin_port)); - monitor_printf(mon, "%15s %5d %5d %5d\n", - inet_ntoa(dst_addr), ntohs(dst_port), - so->so_rcv.sb_cc, so->so_snd.sb_cc); + udp->fd = so->s; + udp->src_addr = + g_strdup(src.sin_addr.s_addr ? inet_ntoa(src.sin_addr) : "*"); + udp->src_port = ntohs(src.sin_port); + udp->dest_addr = g_strdup(inet_ntoa(dst_addr)); + udp->dest_port = ntohs(dst_port); + udp->recv_buffered = so->so_rcv.sb_cc; + udp->send_buffered = so->so_snd.sb_cc; + *p_next = list; + p_next = &list->next; } for (so = slirp->icmp.so_next; so != &slirp->icmp; so = so->so_next) { - snprintf(buf, sizeof(buf), " ICMP[%d sec]", - (so->so_expire - curtime) / 1000); + UsernetConnection *conn = g_new0(UsernetConnection, 1); + UsernetICMPConnection *icmp = &conn->u.icmp; + UsernetConnectionList *list = g_new0(UsernetConnectionList, 1); + + icmp->expire_time_ms = so->so_expire - curtime; src.sin_addr = so->so_laddr; dst_addr = so->so_faddr; - monitor_printf(mon, "%-19s %3d %15s - ", buf, so->s, - src.sin_addr.s_addr ? inet_ntoa(src.sin_addr) : "*"); - monitor_printf(mon, "%15s - %5d %5d\n", inet_ntoa(dst_addr), - so->so_rcv.sb_cc, so->so_snd.sb_cc); + icmp->fd = so->s; + icmp->src_addr = + g_strdup(src.sin_addr.s_addr ? inet_ntoa(src.sin_addr) : "*"); + icmp->dest_addr = g_strdup(inet_ntoa(dst_addr)); + icmp->recv_buffered = so->so_rcv.sb_cc; + icmp->send_buffered = so->so_snd.sb_cc; + *p_next = list; + p_next = &list->next; } } + + +void slirp_connection_info(Slirp *slirp, Monitor *mon) +{ + const char *state; + char buf[64]; + UsernetInfo *info = g_new0(UsernetInfo, 1); + UsernetConnectionList *cl; + + monitor_printf(mon, " Protocol[State] FD Source Address Port " + "Dest. Address Port RecvQ SendQ\n"); + + usernet_get_info(slirp, info); + for (cl = info->connections; cl && cl->value; cl = cl->next) { + UsernetConnection *conn = cl->value; + + if (conn->type == USERNET_TYPE_TCP) { + UsernetTCPConnection *tcp = &conn->u.tcp; + + if (tcp->hostfwd) { + state = "HOST_FORWARD"; + } else { + state = TCPS_str(tcp->state); + } + snprintf(buf, sizeof(buf), " TCP[%s]", state); + monitor_printf(mon, "%-19s %3" PRId64 " %15s %5" PRId64 " ", + buf, tcp->fd, + tcp->src_addr, tcp->src_port); + monitor_printf(mon, "%15s %5" PRId64 " %5" PRId64 " %5" PRId64 "\n", + tcp->dest_addr, tcp->dest_port, + tcp->recv_buffered, tcp->send_buffered); + } else if (conn->type == USERNET_TYPE_UDP) { + UsernetUDPConnection *udp = &conn->u.udp; + + if (udp->hostfwd) { + snprintf(buf, sizeof(buf), " UDP[HOST_FORWARD]"); + } else { + snprintf(buf, sizeof(buf), " UDP[%" PRId64 " sec]", + udp->expire_time_ms / 1000); + } + monitor_printf(mon, "%-19s %3" PRId64 " %15s %5" PRId64 " ", + buf, udp->fd, + udp->src_addr, udp->src_port); + monitor_printf(mon, "%15s %5" PRId64 " %5" PRId64 " %5" PRId64 "\n", + udp->dest_addr, udp->dest_port, + udp->recv_buffered, udp->send_buffered); + } else { + UsernetICMPConnection *icmp = &conn->u.icmp; + + assert(conn->type == USERNET_TYPE_ICMP); + snprintf(buf, sizeof(buf), " ICMP[%" PRId64 " sec]", + icmp->expire_time_ms / 1000); + monitor_printf(mon, "%-19s %3" PRId64 " %15s - ", buf, icmp->fd, + icmp->src_addr); + monitor_printf(mon, "%15s - %5" PRId64 " %5" PRId64 "\n", + icmp->dest_addr, + icmp->recv_buffered, icmp->send_buffered); + } + } + + qapi_free_UsernetInfo(info); +} diff --git a/slirp/tcp.h b/slirp/tcp.h index 174d3d960c..155569f380 100644 --- a/slirp/tcp.h +++ b/slirp/tcp.h @@ -133,21 +133,6 @@ struct tcphdr { #define TCP_NSTATES 11 -#define TCPS_CLOSED 0 /* closed */ -#define TCPS_LISTEN 1 /* listening for connection */ -#define TCPS_SYN_SENT 2 /* active, have sent syn */ -#define TCPS_SYN_RECEIVED 3 /* have send and received syn */ -/* states < TCPS_ESTABLISHED are those where connections not established */ -#define TCPS_ESTABLISHED 4 /* established */ -#define TCPS_CLOSE_WAIT 5 /* rcvd fin, waiting for close */ -/* states > TCPS_CLOSE_WAIT are those where user has closed */ -#define TCPS_FIN_WAIT_1 6 /* have closed, sent fin */ -#define TCPS_CLOSING 7 /* closed xchd FIN; await FIN ACK */ -#define TCPS_LAST_ACK 8 /* had fin and close; await FIN ACK */ -/* states > TCPS_CLOSE_WAIT && < TCPS_FIN_WAIT_2 await ACK of FIN */ -#define TCPS_FIN_WAIT_2 9 /* have closed, fin is acked */ -#define TCPS_TIME_WAIT 10 /* in 2*msl quiet wait after close */ - #define TCPS_HAVERCVDSYN(s) ((s) >= TCPS_SYN_RECEIVED) #define TCPS_HAVEESTABLISHED(s) ((s) >= TCPS_ESTABLISHED) #define TCPS_HAVERCVDFIN(s) ((s) >= TCPS_TIME_WAIT)
HMP "info usernet" has been available but it isn't ideal for programmed use cases. This closes the gap in QMP by adding a counterpart "query-usernet" command. It is basically translated from the HMP slirp_connection_info() loop, which now calls the QMP implementation and prints the data, just like other HMP info_* commands. The TCPS_* macros are now defined as a QAPI enum. Signed-off-by: Fam Zheng <famz@redhat.com> --- net/slirp.c | 26 +++++++ qapi/net.json | 214 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ slirp/libslirp.h | 2 + slirp/misc.c | 158 ++++++++++++++++++++++++++++------------ slirp/tcp.h | 15 ---- 5 files changed, 355 insertions(+), 60 deletions(-)