| Message ID | 1525295174-15995-7-git-send-email-mgautam@codeaurora.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
Hi, On Wed, May 2, 2018 at 2:06 PM, Manu Gautam <mgautam@codeaurora.org> wrote: > To improve eye diagram for PHYs on different boards of same SOC, > some parameters may need to be changed. Provide device tree > properties to override these from board specific device tree > files. While at it, replace "qcom,qusb2-v2-phy" with compatible > string for USB2 PHY on sdm845 which was earlier added for > sdm845 only. > > Signed-off-by: Manu Gautam <mgautam@codeaurora.org> > --- > .../devicetree/bindings/phy/qcom-qusb2-phy.txt | 23 +++++++++++++- > include/dt-bindings/phy/phy-qcom-qusb2.h | 37 ++++++++++++++++++++++ > 2 files changed, 59 insertions(+), 1 deletion(-) > create mode 100644 include/dt-bindings/phy/phy-qcom-qusb2.h Thanks for adding the #defines, describing the defaults, and including which SoCs the new properties work on. This looks great to me now, thanks! Reviewed-by: Douglas Anderson <dianders@chromium.org> -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, May 03, 2018 at 02:36:13AM +0530, Manu Gautam wrote: > To improve eye diagram for PHYs on different boards of same SOC, > some parameters may need to be changed. Provide device tree > properties to override these from board specific device tree > files. While at it, replace "qcom,qusb2-v2-phy" with compatible > string for USB2 PHY on sdm845 which was earlier added for > sdm845 only. > > Signed-off-by: Manu Gautam <mgautam@codeaurora.org> > --- > .../devicetree/bindings/phy/qcom-qusb2-phy.txt | 23 +++++++++++++- > include/dt-bindings/phy/phy-qcom-qusb2.h | 37 ++++++++++++++++++++++ > 2 files changed, 59 insertions(+), 1 deletion(-) > create mode 100644 include/dt-bindings/phy/phy-qcom-qusb2.h > > diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt > index 42c9742..03025d9 100644 > --- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt > +++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt > @@ -6,7 +6,7 @@ QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. > Required properties: > - compatible: compatible list, contains > "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996, > - "qcom,qusb2-v2-phy" for QUSB2 V2 PHY. > + "qcom,sdm845-qusb2-phy" for 10nm PHY on sdm845. > > - reg: offset and length of the PHY register set. > - #phy-cells: must be 0. > @@ -27,6 +27,27 @@ Optional properties: > tuning parameter value for qusb2 phy. > > - qcom,tcsr-syscon: Phandle to TCSR syscon register region. > + - qcom,imp-res-offset-value: It is a 6 bit value that specifies offset to be > + added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY > + tuning parameter that may vary for different boards of same SOC. > + This property is applicable to only QUSB2 v2 PHY (sdm845). > + - qcom,hstx-trim-value: It is a 4 bit value that specifies tuning for HSTX > + output current. > + Possible range is - 15mA to 24mA (stepsize of 600 uA). > + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. > + This property is applicable to only QUSB2 v2 PHY (sdm845). > + Default value is 22.2mA for sdm845. > + - qcom,preemphasis-level: It is a 2 bit value that specifies pre-emphasis level. > + Possible range is 0 to 15% (stepsize of 5%). > + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. > + This property is applicable to only QUSB2 v2 PHY (sdm845). > + Default value is 10% for sdm845. > +- qcom,preemphasis-width: It is a 1 bit value that specifies how long the HSTX > + pre-emphasis (specified using qcom,preemphasis-level) must be in > + effect. Duration could be half-bit of full-bit. s/of/or/ But I'd just make this a boolean instead: qcom,preemphasis-half-bit > + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. > + This property is applicable to only QUSB2 v2 PHY (sdm845). > + Default value is full-bit width for sdm845. -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Rob, On Mon, May 7, 2018 at 8:53 AM, Rob Herring <robh@kernel.org> wrote: > On Thu, May 03, 2018 at 02:36:13AM +0530, Manu Gautam wrote: >> To improve eye diagram for PHYs on different boards of same SOC, >> some parameters may need to be changed. Provide device tree >> properties to override these from board specific device tree >> files. While at it, replace "qcom,qusb2-v2-phy" with compatible >> string for USB2 PHY on sdm845 which was earlier added for >> sdm845 only. >> >> Signed-off-by: Manu Gautam <mgautam@codeaurora.org> >> --- >> .../devicetree/bindings/phy/qcom-qusb2-phy.txt | 23 +++++++++++++- >> include/dt-bindings/phy/phy-qcom-qusb2.h | 37 ++++++++++++++++++++++ >> 2 files changed, 59 insertions(+), 1 deletion(-) >> create mode 100644 include/dt-bindings/phy/phy-qcom-qusb2.h >> >> diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt >> index 42c9742..03025d9 100644 >> --- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt >> +++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt >> @@ -6,7 +6,7 @@ QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. >> Required properties: >> - compatible: compatible list, contains >> "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996, >> - "qcom,qusb2-v2-phy" for QUSB2 V2 PHY. >> + "qcom,sdm845-qusb2-phy" for 10nm PHY on sdm845. >> >> - reg: offset and length of the PHY register set. >> - #phy-cells: must be 0. >> @@ -27,6 +27,27 @@ Optional properties: >> tuning parameter value for qusb2 phy. >> >> - qcom,tcsr-syscon: Phandle to TCSR syscon register region. >> + - qcom,imp-res-offset-value: It is a 6 bit value that specifies offset to be >> + added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY >> + tuning parameter that may vary for different boards of same SOC. >> + This property is applicable to only QUSB2 v2 PHY (sdm845). >> + - qcom,hstx-trim-value: It is a 4 bit value that specifies tuning for HSTX >> + output current. >> + Possible range is - 15mA to 24mA (stepsize of 600 uA). >> + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. >> + This property is applicable to only QUSB2 v2 PHY (sdm845). >> + Default value is 22.2mA for sdm845. >> + - qcom,preemphasis-level: It is a 2 bit value that specifies pre-emphasis level. >> + Possible range is 0 to 15% (stepsize of 5%). >> + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. >> + This property is applicable to only QUSB2 v2 PHY (sdm845). >> + Default value is 10% for sdm845. >> +- qcom,preemphasis-width: It is a 1 bit value that specifies how long the HSTX >> + pre-emphasis (specified using qcom,preemphasis-level) must be in >> + effect. Duration could be half-bit of full-bit. > > s/of/or/ > > But I'd just make this a boolean instead: qcom,preemphasis-half-bit I had this same comment in the post of v4. See <https://patchwork.kernel.org/patch/10314923/>. Specifically, I said: > Perhaps just make this a boolean property. If it exists then you get > the non-default case. AKA: if the default is full bit width, then > you'd allow a boolean property "qcom,preemphasis-half-width" to > override. If the default is half bit width then you'd allow > "qcom,preemphasis-full-width" to override. Manu replied: > Default property value for an SOC is specified in driver and could vary from > soc to soc. Hence, from board devicetree for different SOCs we might need > to select separate widths overriding default driver values. > Alternative is to have two bool properties each for half and full-width. Did > you actually mean that? IMHO given Manu's argument it seems fine to specify it the way he did. Please advise if you agree or disagree. -Doug -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, May 7, 2018 at 10:57 AM, Doug Anderson <dianders@chromium.org> wrote: > Rob, > > On Mon, May 7, 2018 at 8:53 AM, Rob Herring <robh@kernel.org> wrote: >> On Thu, May 03, 2018 at 02:36:13AM +0530, Manu Gautam wrote: >>> To improve eye diagram for PHYs on different boards of same SOC, >>> some parameters may need to be changed. Provide device tree >>> properties to override these from board specific device tree >>> files. While at it, replace "qcom,qusb2-v2-phy" with compatible >>> string for USB2 PHY on sdm845 which was earlier added for >>> sdm845 only. >>> >>> Signed-off-by: Manu Gautam <mgautam@codeaurora.org> >>> --- >>> .../devicetree/bindings/phy/qcom-qusb2-phy.txt | 23 +++++++++++++- >>> include/dt-bindings/phy/phy-qcom-qusb2.h | 37 ++++++++++++++++++++++ >>> 2 files changed, 59 insertions(+), 1 deletion(-) >>> create mode 100644 include/dt-bindings/phy/phy-qcom-qusb2.h >>> >>> diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt >>> index 42c9742..03025d9 100644 >>> --- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt >>> +++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt >>> @@ -6,7 +6,7 @@ QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. >>> Required properties: >>> - compatible: compatible list, contains >>> "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996, >>> - "qcom,qusb2-v2-phy" for QUSB2 V2 PHY. >>> + "qcom,sdm845-qusb2-phy" for 10nm PHY on sdm845. >>> >>> - reg: offset and length of the PHY register set. >>> - #phy-cells: must be 0. >>> @@ -27,6 +27,27 @@ Optional properties: >>> tuning parameter value for qusb2 phy. >>> >>> - qcom,tcsr-syscon: Phandle to TCSR syscon register region. >>> + - qcom,imp-res-offset-value: It is a 6 bit value that specifies offset to be >>> + added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY >>> + tuning parameter that may vary for different boards of same SOC. >>> + This property is applicable to only QUSB2 v2 PHY (sdm845). >>> + - qcom,hstx-trim-value: It is a 4 bit value that specifies tuning for HSTX >>> + output current. >>> + Possible range is - 15mA to 24mA (stepsize of 600 uA). >>> + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. >>> + This property is applicable to only QUSB2 v2 PHY (sdm845). >>> + Default value is 22.2mA for sdm845. >>> + - qcom,preemphasis-level: It is a 2 bit value that specifies pre-emphasis level. >>> + Possible range is 0 to 15% (stepsize of 5%). >>> + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. >>> + This property is applicable to only QUSB2 v2 PHY (sdm845). >>> + Default value is 10% for sdm845. >>> +- qcom,preemphasis-width: It is a 1 bit value that specifies how long the HSTX >>> + pre-emphasis (specified using qcom,preemphasis-level) must be in >>> + effect. Duration could be half-bit of full-bit. >> >> s/of/or/ >> >> But I'd just make this a boolean instead: qcom,preemphasis-half-bit > > I had this same comment in the post of v4. See > <https://patchwork.kernel.org/patch/10314923/>. Specifically, I said: > >> Perhaps just make this a boolean property. If it exists then you get >> the non-default case. AKA: if the default is full bit width, then >> you'd allow a boolean property "qcom,preemphasis-half-width" to >> override. If the default is half bit width then you'd allow >> "qcom,preemphasis-full-width" to override. > > Manu replied: > >> Default property value for an SOC is specified in driver and could vary from >> soc to soc. Hence, from board devicetree for different SOCs we might need >> to select separate widths overriding default driver values. >> Alternative is to have two bool properties each for half and full-width. Did >> you actually mean that? > > > IMHO given Manu's argument it seems fine to specify it the way he did. > Please advise if you agree or disagree. Okay. Reviewed-by: Rob Herring <robh@kernel.org> -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt index 42c9742..03025d9 100644 --- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt @@ -6,7 +6,7 @@ QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. Required properties: - compatible: compatible list, contains "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996, - "qcom,qusb2-v2-phy" for QUSB2 V2 PHY. + "qcom,sdm845-qusb2-phy" for 10nm PHY on sdm845. - reg: offset and length of the PHY register set. - #phy-cells: must be 0. @@ -27,6 +27,27 @@ Optional properties: tuning parameter value for qusb2 phy. - qcom,tcsr-syscon: Phandle to TCSR syscon register region. + - qcom,imp-res-offset-value: It is a 6 bit value that specifies offset to be + added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY + tuning parameter that may vary for different boards of same SOC. + This property is applicable to only QUSB2 v2 PHY (sdm845). + - qcom,hstx-trim-value: It is a 4 bit value that specifies tuning for HSTX + output current. + Possible range is - 15mA to 24mA (stepsize of 600 uA). + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + This property is applicable to only QUSB2 v2 PHY (sdm845). + Default value is 22.2mA for sdm845. + - qcom,preemphasis-level: It is a 2 bit value that specifies pre-emphasis level. + Possible range is 0 to 15% (stepsize of 5%). + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + This property is applicable to only QUSB2 v2 PHY (sdm845). + Default value is 10% for sdm845. +- qcom,preemphasis-width: It is a 1 bit value that specifies how long the HSTX + pre-emphasis (specified using qcom,preemphasis-level) must be in + effect. Duration could be half-bit of full-bit. + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + This property is applicable to only QUSB2 v2 PHY (sdm845). + Default value is full-bit width for sdm845. Example: hsusb_phy: phy@7411000 { diff --git a/include/dt-bindings/phy/phy-qcom-qusb2.h b/include/dt-bindings/phy/phy-qcom-qusb2.h new file mode 100644 index 0000000..aea814a --- /dev/null +++ b/include/dt-bindings/phy/phy-qcom-qusb2.h @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_QCOM_PHY_QUSB2_H_ +#define _DT_BINDINGS_QCOM_PHY_QUSB2_H_ + +/* PHY HSTX TRIM bit values (24mA to 15mA) */ +#define QUSB2_V2_HSTX_TRIM_24_0_MA 0x0 +#define QUSB2_V2_HSTX_TRIM_23_4_MA 0x1 +#define QUSB2_V2_HSTX_TRIM_22_8_MA 0x2 +#define QUSB2_V2_HSTX_TRIM_22_2_MA 0x3 +#define QUSB2_V2_HSTX_TRIM_21_6_MA 0x4 +#define QUSB2_V2_HSTX_TRIM_21_0_MA 0x5 +#define QUSB2_V2_HSTX_TRIM_20_4_MA 0x6 +#define QUSB2_V2_HSTX_TRIM_19_8_MA 0x7 +#define QUSB2_V2_HSTX_TRIM_19_2_MA 0x8 +#define QUSB2_V2_HSTX_TRIM_18_6_MA 0x9 +#define QUSB2_V2_HSTX_TRIM_18_0_MA 0xa +#define QUSB2_V2_HSTX_TRIM_17_4_MA 0xb +#define QUSB2_V2_HSTX_TRIM_16_8_MA 0xc +#define QUSB2_V2_HSTX_TRIM_16_2_MA 0xd +#define QUSB2_V2_HSTX_TRIM_15_6_MA 0xe +#define QUSB2_V2_HSTX_TRIM_15_0_MA 0xf + +/* PHY PREEMPHASIS bit values */ +#define QUSB2_V2_PREEMPHASIS_NONE 0 +#define QUSB2_V2_PREEMPHASIS_5_PERCENT 1 +#define QUSB2_V2_PREEMPHASIS_10_PERCENT 2 +#define QUSB2_V2_PREEMPHASIS_15_PERCENT 3 + +/* PHY PREEMPHASIS-WIDTH bit values */ +#define QUSB2_V2_PREEMPHASIS_WIDTH_FULL_BIT 0 +#define QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT 1 + +#endif
To improve eye diagram for PHYs on different boards of same SOC, some parameters may need to be changed. Provide device tree properties to override these from board specific device tree files. While at it, replace "qcom,qusb2-v2-phy" with compatible string for USB2 PHY on sdm845 which was earlier added for sdm845 only. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> --- .../devicetree/bindings/phy/qcom-qusb2-phy.txt | 23 +++++++++++++- include/dt-bindings/phy/phy-qcom-qusb2.h | 37 ++++++++++++++++++++++ 2 files changed, 59 insertions(+), 1 deletion(-) create mode 100644 include/dt-bindings/phy/phy-qcom-qusb2.h