| Message ID | 20180428054248.22387-1-bjorn.andersson@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Quoting Bjorn Andersson (2018-04-27 22:42:47) > diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi > new file mode 100644 > index 000000000000..d6665e4f801f > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi > @@ -0,0 +1,340 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ > + > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/clock/qcom,gcc-msm8998.h> > + > +/ { > + model = "Qualcomm Technologies, Inc. MSM 8998"; > + > + interrupt-parent = <&intc>; > + > + qcom,msm-id = <292 0x0>; No update to dtbtool? > + > + #address-cells = <2>; > + #size-cells = <2>; > + > + chosen { }; > + > + memory { > + device_type = "memory"; > + /* We expect the bootloader to fill in the reg */ > + reg = <0 0 0 0>; > + }; > + > + cpus { > + #address-cells = <2>; > + #size-cells = <0>; > + > + CPU0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0>; > + enable-method = "psci"; > + efficiency = <1024>; > + next-level-cache = <&L2_0>; > + L2_0: l2-cache { > + compatible = "arm,arch-cache"; > + cache-level = <2>; > + }; > + L1_I_0: l1-icache { > + compatible = "arm,arch-cache"; > + }; > + L1_D_0: l1-dcache { > + compatible = "arm,arch-cache"; > + }; > + }; > + > + CPU1: cpu@1 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x1>; > + enable-method = "psci"; > + efficiency = <1024>; > + next-level-cache = <&L2_0>; > + L1_I_1: l1-icache { > + compatible = "arm,arch-cache"; > + }; > + L1_D_1: l1-dcache { > + compatible = "arm,arch-cache"; > + }; > + }; > + > + CPU2: cpu@2 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x2>; > + enable-method = "psci"; > + efficiency = <1024>; > + next-level-cache = <&L2_0>; > + L1_I_2: l1-icache { > + compatible = "arm,arch-cache"; > + }; > + L1_D_2: l1-dcache { > + compatible = "arm,arch-cache"; > + }; > + }; > + > + CPU3: cpu@3 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x3>; > + enable-method = "psci"; > + efficiency = <1024>; > + next-level-cache = <&L2_0>; > + L1_I_3: l1-icache { > + compatible = "arm,arch-cache"; > + }; > + L1_D_3: l1-dcache { > + compatible = "arm,arch-cache"; > + }; > + }; > + > + CPU4: cpu@100 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x100>; > + enable-method = "psci"; > + efficiency = <1536>; > + next-level-cache = <&L2_1>; > + L2_1: l2-cache { > + compatible = "arm,arch-cache"; > + cache-level = <2>; > + }; > + L1_I_100: l1-icache { > + compatible = "arm,arch-cache"; > + }; > + L1_D_100: l1-dcache { > + compatible = "arm,arch-cache"; > + }; > + }; > + > + CPU5: cpu@101 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x101>; > + enable-method = "psci"; > + efficiency = <1536>; > + next-level-cache = <&L2_1>; > + L1_I_101: l1-icache { > + compatible = "arm,arch-cache"; > + }; > + L1_D_101: l1-dcache { > + compatible = "arm,arch-cache"; > + }; > + }; > + > + CPU6: cpu@102 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x102>; > + enable-method = "psci"; > + efficiency = <1536>; > + next-level-cache = <&L2_1>; > + L1_I_102: l1-icache { > + compatible = "arm,arch-cache"; > + }; > + L1_D_102: l1-dcache { > + compatible = "arm,arch-cache"; > + }; > + }; > + > + CPU7: cpu@103 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x103>; > + enable-method = "psci"; > + efficiency = <1536>; > + next-level-cache = <&L2_1>; > + L1_I_103: l1-icache { > + compatible = "arm,arch-cache"; > + }; > + L1_D_103: l1-dcache { > + compatible = "arm,arch-cache"; > + }; > + }; > + > + cpu-map { > + cluster0 { > + core0 { > + cpu = <&CPU0>; > + }; > + > + core1 { > + cpu = <&CPU1>; > + }; > + > + core2 { > + cpu = <&CPU2>; > + }; > + > + core3 { > + cpu = <&CPU3>; > + }; > + }; > + > + cluster1 { > + core0 { > + cpu = <&CPU4>; > + }; > + > + core1 { > + cpu = <&CPU5>; > + }; > + > + core2 { > + cpu = <&CPU6>; > + }; > + > + core3 { > + cpu = <&CPU7>; > + }; > + }; > + }; I still wonder if this is accurate, but OK. > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, > + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, > + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, > + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; > + }; > + > + clocks { > + xo_board { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <19200000>; > + }; > + > + sleep_clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <32764>; > + }; > + }; > + > + psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; > + > + soc: soc {}; > +}; > + > +&soc { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0 0 0 0xffffffff>; > + compatible = "simple-bus"; > + > + intc: interrupt-controller@17a00000 { > + compatible = "arm,gic-v3"; > + reg = <0x17a00000 0x10000>, /* GICD */ > + <0x17b00000 0x100000>; /* GICR * 8 */ > + #interrupt-cells = <3>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + interrupt-controller; > + #redistributor-regions = <1>; > + redistributor-stride = <0x0 0x20000>; Is this needed? The redistributor stuff can be left out if there's only one right? > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + blsp2_uart1: serial@c1b0000 { Clk name says uart2 though? > + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; > + reg = <0xc1b0000 0x1000>; > + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, > + <&gcc GCC_BLSP2_AHB_CLK>; > + clock-names = "core", "iface"; > + status = "disabled"; > + }; > +
On Mon 07 May 15:59 PDT 2018, Stephen Boyd wrote: > Quoting Bjorn Andersson (2018-04-27 22:42:47) > > diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi > > new file mode 100644 > > index 000000000000..d6665e4f801f > > --- /dev/null > > +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi > > @@ -0,0 +1,340 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ > > + > > +#include <dt-bindings/interrupt-controller/arm-gic.h> > > +#include <dt-bindings/clock/qcom,gcc-msm8998.h> > > + > > +/ { > > + model = "Qualcomm Technologies, Inc. MSM 8998"; > > + > > + interrupt-parent = <&intc>; > > + > > + qcom,msm-id = <292 0x0>; > > No update to dtbtool? > This allows me to concatenate the dtb to the Image.gz and boot the device. From my scripts I see that I tried to use dtbTool before reverting to this... [..] > > + cpu-map { > > + cluster0 { > > + core0 { > > + cpu = <&CPU0>; > > + }; > > + > > + core1 { > > + cpu = <&CPU1>; > > + }; > > + > > + core2 { > > + cpu = <&CPU2>; > > + }; > > + > > + core3 { > > + cpu = <&CPU3>; > > + }; > > + }; > > + > > + cluster1 { > > + core0 { > > + cpu = <&CPU4>; > > + }; > > + > > + core1 { > > + cpu = <&CPU5>; > > + }; > > + > > + core2 { > > + cpu = <&CPU6>; > > + }; > > + > > + core3 { > > + cpu = <&CPU7>; > > + }; > > + }; > > + }; > > I still wonder if this is accurate, but OK. > Afaict it matches downstream, not sure if I'm missing something? [..] > > + intc: interrupt-controller@17a00000 { > > + compatible = "arm,gic-v3"; > > + reg = <0x17a00000 0x10000>, /* GICD */ > > + <0x17b00000 0x100000>; /* GICR * 8 */ > > + #interrupt-cells = <3>; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges; > > + interrupt-controller; > > + #redistributor-regions = <1>; > > + redistributor-stride = <0x0 0x20000>; > > Is this needed? The redistributor stuff can be left out if there's only > one right? > #redistributor-regions is listed as optional if there's more than 1, the stride is still needed. Afaict the stride still needs to be specified, as it's different from the default 64kb. > > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + blsp2_uart1: serial@c1b0000 { > > Clk name says uart2 though? > That's because it's the wrong clock. Thanks! > > + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; > > + reg = <0xc1b0000 0x1000>; > > + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, > > + <&gcc GCC_BLSP2_AHB_CLK>; > > + clock-names = "core", "iface"; > > + status = "disabled"; > > + }; Regards, Bjorn
Quoting Bjorn Andersson (2018-05-07 16:35:11) > On Mon 07 May 15:59 PDT 2018, Stephen Boyd wrote: > > > Quoting Bjorn Andersson (2018-04-27 22:42:47) > > > diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi > > > new file mode 100644 > > > index 000000000000..d6665e4f801f > > > --- /dev/null > > > +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi > > > @@ -0,0 +1,340 @@ > > > +// SPDX-License-Identifier: GPL-2.0 > > > +/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ > > > + > > > +#include <dt-bindings/interrupt-controller/arm-gic.h> > > > +#include <dt-bindings/clock/qcom,gcc-msm8998.h> > > > + > > > +/ { > > > + model = "Qualcomm Technologies, Inc. MSM 8998"; Drop the space between MSM and 8998? > > > + > > > + interrupt-parent = <&intc>; > > > + > > > + qcom,msm-id = <292 0x0>; > > > > No update to dtbtool? > > > > This allows me to concatenate the dtb to the Image.gz and boot the > device. From my scripts I see that I tried to use dtbTool before > reverting to this... Oh, must be that the bootloader mandates the magic numbers exist in the blob and you can't concatenate a single dtb and have it ignore the magic numbers? Sounds perfect. > > [..] > > > + cpu-map { > > > + cluster0 { > > > + core0 { > > > + cpu = <&CPU0>; > > > + }; > > > + > > > + core1 { > > > + cpu = <&CPU1>; > > > + }; > > > + > > > + core2 { > > > + cpu = <&CPU2>; > > > + }; > > > + > > > + core3 { > > > + cpu = <&CPU3>; > > > + }; > > > + }; > > > + > > > + cluster1 { > > > + core0 { > > > + cpu = <&CPU4>; > > > + }; > > > + > > > + core1 { > > > + cpu = <&CPU5>; > > > + }; > > > + > > > + core2 { > > > + cpu = <&CPU6>; > > > + }; > > > + > > > + core3 { > > > + cpu = <&CPU7>; > > > + }; > > > + }; > > > + }; > > > > I still wonder if this is accurate, but OK. > > > > Afaict it matches downstream, not sure if I'm missing something? Right, it matches downstream, but I seem to recall that downstream was describing the power "clusters" for big and little, when this mapping usually follows the cache layout of the CPUs (i.e. if all CPUs share a cache then they're in the same cluster). > > [..] > > > + intc: interrupt-controller@17a00000 { > > > + compatible = "arm,gic-v3"; > > > + reg = <0x17a00000 0x10000>, /* GICD */ > > > + <0x17b00000 0x100000>; /* GICR * 8 */ > > > + #interrupt-cells = <3>; > > > + #address-cells = <1>; > > > + #size-cells = <1>; > > > + ranges; > > > + interrupt-controller; > > > + #redistributor-regions = <1>; > > > + redistributor-stride = <0x0 0x20000>; > > > > Is this needed? The redistributor stuff can be left out if there's only > > one right? > > > > #redistributor-regions is listed as optional if there's more than 1, the > stride is still needed. > > Afaict the stride still needs to be specified, as it's different from > the default 64kb. There's one region though. Marc rejected those properties in the sdm845 dts file[1] and it looks exactly the same here. It would be nice if the ITS region was described (we know it's there and it's probably the same offset as on SDM845 no doubt). > > > > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > > > + }; > > > + > > > + blsp2_uart1: serial@c1b0000 { > > > > Clk name says uart2 though? > > > > That's because it's the wrong clock. Thanks! Hah! [1] https://lkml.kernel.org/r/96fac632-8fb8-0933-cc1f-627acb38a595@arm.com
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 55ec5ee7f7e8..f658595bb347 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -6,3 +6,4 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts new file mode 100644 index 000000000000..f1853e020e57 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ + +/dts-v1/; + +#include "msm8998-mtp.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. MSM 8998 v1 MTP"; + compatible = "qcom,msm8998-mtp"; + + qcom,board-id = <8 0>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi new file mode 100644 index 000000000000..e30c95f63a05 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ + +#include "msm8998.dtsi" + +/ { + aliases { + serial0 = &blsp2_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&soc { + serial@c1b0000 { + status = "okay"; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi new file mode 100644 index 000000000000..d6665e4f801f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -0,0 +1,340 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-msm8998.h> + +/ { + model = "Qualcomm Technologies, Inc. MSM 8998"; + + interrupt-parent = <&intc>; + + qcom,msm-id = <292 0x0>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + efficiency = <1024>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "arm,arch-cache"; + cache-level = <2>; + }; + L1_I_0: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_0: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + efficiency = <1024>; + next-level-cache = <&L2_0>; + L1_I_1: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_1: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + efficiency = <1024>; + next-level-cache = <&L2_0>; + L1_I_2: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_2: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + efficiency = <1024>; + next-level-cache = <&L2_0>; + L1_I_3: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_3: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "psci"; + efficiency = <1536>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "arm,arch-cache"; + cache-level = <2>; + }; + L1_I_100: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_100: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x101>; + enable-method = "psci"; + efficiency = <1536>; + next-level-cache = <&L2_1>; + L1_I_101: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_101: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x102>; + enable-method = "psci"; + efficiency = <1536>; + next-level-cache = <&L2_1>; + L1_I_102: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_102: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x103>; + enable-method = "psci"; + efficiency = <1536>; + next-level-cache = <&L2_1>; + L1_I_103: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_103: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; + }; + + clocks { + xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + soc: soc {}; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + reg = <0x17a00000 0x10000>, /* GICD */ + <0x17b00000 0x100000>; /* GICR * 8 */ + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-msm8998"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x100000 0xb0000>; + }; + + blsp2_uart1: serial@c1b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xc1b0000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + timer@17920000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x17920000 0x1000>; + + frame@17921000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17921000 0x1000>, + <0x17922000 0x1000>; + }; + + frame@17923000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17923000 0x1000>; + status = "disabled"; + }; + + frame@17924000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17924000 0x1000>; + status = "disabled"; + }; + + frame@17925000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17925000 0x1000>; + status = "disabled"; + }; + + frame@17926000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17926000 0x1000>; + status = "disabled"; + }; + + frame@17927000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17927000 0x1000>; + status = "disabled"; + }; + + frame@17928000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17928000 0x1000>; + status = "disabled"; + }; + }; + + spmi_bus: qcom,spmi@800f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x800f000 0x1000>, + <0x8400000 0x1000000>, + <0x9400000 0x1000000>, + <0xa400000 0x220000>, + <0x800a000 0x3000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; +};