Message ID | 1522042904-26559-1-git-send-email-govinds@codeaurora.org (mailing list archive) |
---|---|
State | Changes Requested |
Delegated to: | Kalle Valo |
Headers | show |
On Sun 25 Mar 22:41 PDT 2018, Govind Singh wrote: > Add qmi message required for enabling and disabling > target to qmi server running in Q6. > > Signed-off-by: Govind Singh <govinds@codeaurora.org> > --- > drivers/net/wireless/ath/ath10k/qmi.c | 226 +++++++++++++++++++++++++++++++++- > drivers/net/wireless/ath/ath10k/qmi.h | 62 ++++++---- > 2 files changed, 264 insertions(+), 24 deletions(-) > > diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c > index f23d0fe..331a528 100644 > --- a/drivers/net/wireless/ath/ath10k/qmi.c > +++ b/drivers/net/wireless/ath/ath10k/qmi.c > @@ -35,7 +35,30 @@ > #define WLFW_CLIENT_ID 0x4b4e454c > #define WLFW_TIMEOUT 500 > > -static struct ath10k_qmi *qmi; > +static struct ath10k_qmi { > + struct platform_device *pdev; > + struct qmi_handle qmi_hdl; > + struct sockaddr_qrtr sq; > + bool fw_ready; > + bool msa_ready; > + struct work_struct work_svc_arrive; > + struct work_struct work_svc_exit; > + struct work_struct work_msa_ready; > + struct workqueue_struct *event_wq; > + spinlock_t event_lock; /* spinlock for fw ready status*/ > + u32 nr_mem_region; > + struct ath10k_msa_mem_region_info > + mem_region[MAX_NUM_MEMORY_REGIONS]; > + phys_addr_t msa_pa; > + u32 msa_mem_size; > + void *msa_va; > + struct ath10k_qmi_chip_info chip_info; > + struct ath10k_qmi_board_info board_info; > + struct ath10k_qmi_soc_info soc_info; > + struct ath10k_qmi_fw_version_info fw_version_info; > + char fw_build_id[MAX_BUILD_ID_LEN + 1]; > + struct ath10k_qmi_cal_data cal_data[MAX_NUM_CAL_V01]; > +} *qmi; Don't end your patch series with a move of this structure, fold it back into each patch. > > static int > ath10k_qmi_map_msa_permissions(struct ath10k_msa_mem_region_info *mem_region) > @@ -444,6 +467,207 @@ int ath10k_qmi_send_cal_report_req(struct ath10k_qmi *qmi) > return ret; > } > > +static int > +ath10k_qmi_mode_send_sync_msg(enum wlfw_driver_mode_enum_v01 mode) > +{ > + struct wlfw_wlan_mode_resp_msg_v01 *resp; 4 bytes > + struct wlfw_wlan_mode_req_msg_v01 *req; 6 bytes, use the stack. > + struct qmi_txn txn; > + int ret; > + > + req = kzalloc(sizeof(*req), GFP_KERNEL); > + if (!req) > + return -ENOMEM; > + > + resp = kzalloc(sizeof(*resp), GFP_KERNEL); > + if (!resp) { > + kfree(req); > + return -ENOMEM; > + } > + > + ret = qmi_txn_init(&qmi->qmi_hdl, &txn, > + wlfw_wlan_mode_resp_msg_v01_ei, > + resp); > + if (ret < 0) { > + pr_err("fail to init txn for mode req %d ret %d\n", mode, ret); > + goto out; > + } > + > + req->mode = mode; > + req->hw_debug_valid = 1; > + req->hw_debug = 0; > + > + ret = qmi_send_request(&qmi->qmi_hdl, NULL, &txn, > + QMI_WLFW_WLAN_MODE_REQ_V01, > + WLFW_WLAN_MODE_REQ_MSG_V01_MAX_MSG_LEN, > + wlfw_wlan_mode_req_msg_v01_ei, req); > + if (ret < 0) { > + qmi_txn_cancel(&txn); > + pr_err("send mode req failed, mode: %d ret: %d\n", > + mode, ret); > + goto out; > + } > + > + ret = qmi_txn_wait(&txn, WLFW_TIMEOUT * HZ); > + if (ret < 0) > + goto out; > + > + if (resp->resp.result != QMI_RESULT_SUCCESS_V01) { > + pr_err("qmi mode request rejected:"); > + pr_err("mode:%d result:%d error:%d\n", > + mode, resp->resp.result, resp->resp.error); > + ret = resp->resp.result; > + goto out; > + } > + > + pr_debug("wlan Mode request completed, mode: %d\n", mode); > + kfree(resp); > + kfree(req); > + return 0; > + > +out: > + kfree(resp); > + kfree(req); > + return ret; > +} > + > +static int > +ath10k_qmi_cfg_send_sync_msg(struct wlfw_wlan_cfg_req_msg_v01 *data) > +{ > + struct wlfw_wlan_cfg_resp_msg_v01 *resp; 4 bytes, use stack > + struct wlfw_wlan_cfg_req_msg_v01 *req; This is larger, use heap > + struct qmi_txn txn; > + int ret; > + > + req = kzalloc(sizeof(*req), GFP_KERNEL); > + if (!req) > + return -ENOMEM; > + > + resp = kzalloc(sizeof(*resp), GFP_KERNEL); > + if (!resp) { > + kfree(req); > + return -ENOMEM; > + } > + > + ret = qmi_txn_init(&qmi->qmi_hdl, &txn, > + wlfw_wlan_cfg_resp_msg_v01_ei, > + resp); > + if (ret < 0) { > + pr_err("fail to init txn for config req %d\n", ret); > + goto out; > + } > + > + memcpy(req, data, sizeof(*req)); I see no reason to create a local copy of this struct, just pass data to qmi_send_request. > + > + ret = qmi_send_request(&qmi->qmi_hdl, NULL, &txn, > + QMI_WLFW_WLAN_CFG_REQ_V01, > + WLFW_WLAN_CFG_REQ_MSG_V01_MAX_MSG_LEN, > + wlfw_wlan_cfg_req_msg_v01_ei, req); > + if (ret < 0) { > + qmi_txn_cancel(&txn); > + pr_err("send config req failed %d\n", ret); > + goto out; > + } > + > + ret = qmi_txn_wait(&txn, WLFW_TIMEOUT * HZ); > + if (ret < 0) > + goto out; > + > + if (resp->resp.result != QMI_RESULT_SUCCESS_V01) { > + pr_err("qmi cfg request rejected:"); > + pr_err("result:%d error:%d\n", > + resp->resp.result, resp->resp.error); > + ret = resp->resp.result; > + goto out; > + } > + > + pr_debug("wlan config request completed\n"); > + kfree(resp); > + kfree(req); > + return 0; > + > +out: > + kfree(resp); > + kfree(req); > + return ret; > +} > + > +int ath10k_qmi_wlan_enable(struct ath10k_qmi_wlan_enable_cfg *config, > + enum ath10k_qmi_driver_mode mode, > + const char *host_version) > +{ > + struct wlfw_wlan_cfg_req_msg_v01 req; > + int ret; > + u32 i; > + > + pr_debug("mode: %d, config: %p:\n", > + mode, config); Use dev_dbg() and dev_err() > + memset(&req, 0, sizeof(req)); > + if (!config) { > + pr_err("wlan enable Config Invalid:%p\n", > + config); > + ret = -EINVAL; > + return ret; > + } > + > + req.host_version_valid = 0; > + > + req.tgt_cfg_valid = 1; > + if (config->num_ce_tgt_cfg > QMI_WLFW_MAX_NUM_CE_V01) > + req.tgt_cfg_len = QMI_WLFW_MAX_NUM_CE_V01; > + else > + req.tgt_cfg_len = config->num_ce_tgt_cfg; > + for (i = 0; i < req.tgt_cfg_len; i++) { > + req.tgt_cfg[i].pipe_num = config->ce_tgt_cfg[i].pipe_num; > + req.tgt_cfg[i].pipe_dir = config->ce_tgt_cfg[i].pipe_dir; > + req.tgt_cfg[i].nentries = config->ce_tgt_cfg[i].nentries; > + req.tgt_cfg[i].nbytes_max = config->ce_tgt_cfg[i].nbytes_max; > + req.tgt_cfg[i].flags = config->ce_tgt_cfg[i].flags; > + } > + > + req.svc_cfg_valid = 1; > + if (config->num_ce_svc_pipe_cfg > QMI_WLFW_MAX_NUM_SVC_V01) > + req.svc_cfg_len = QMI_WLFW_MAX_NUM_SVC_V01; > + else > + req.svc_cfg_len = config->num_ce_svc_pipe_cfg; > + for (i = 0; i < req.svc_cfg_len; i++) { > + req.svc_cfg[i].service_id = config->ce_svc_cfg[i].service_id; > + req.svc_cfg[i].pipe_dir = config->ce_svc_cfg[i].pipe_dir; > + req.svc_cfg[i].pipe_num = config->ce_svc_cfg[i].pipe_num; > + } > + > + req.shadow_reg_valid = 1; > + if (config->num_shadow_reg_cfg > > + QMI_WLFW_MAX_NUM_SHADOW_REG_V01) > + req.shadow_reg_len = QMI_WLFW_MAX_NUM_SHADOW_REG_V01; > + else > + req.shadow_reg_len = config->num_shadow_reg_cfg; > + > + memcpy(req.shadow_reg, config->shadow_reg_cfg, > + sizeof(struct wlfw_shadow_reg_cfg_s_v01) * req.shadow_reg_len); > + > + ret = ath10k_qmi_cfg_send_sync_msg(&req); Either move all of the req buildup into ath10k_qmi_cfg_send_sync_msg() or inline that function here - they are logically the two parts of the same function, don't split it like this. > + if (ret) { > + pr_err("wlan qmi config send failed\n"); > + return ret; > + } > + > + ret = ath10k_qmi_mode_send_sync_msg(mode); > + if (ret) { > + pr_err("wlan qmi mode send failed\n"); > + return ret; > + } > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(ath10k_qmi_wlan_enable); Regards, Bjorn
diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c index f23d0fe..331a528 100644 --- a/drivers/net/wireless/ath/ath10k/qmi.c +++ b/drivers/net/wireless/ath/ath10k/qmi.c @@ -35,7 +35,30 @@ #define WLFW_CLIENT_ID 0x4b4e454c #define WLFW_TIMEOUT 500 -static struct ath10k_qmi *qmi; +static struct ath10k_qmi { + struct platform_device *pdev; + struct qmi_handle qmi_hdl; + struct sockaddr_qrtr sq; + bool fw_ready; + bool msa_ready; + struct work_struct work_svc_arrive; + struct work_struct work_svc_exit; + struct work_struct work_msa_ready; + struct workqueue_struct *event_wq; + spinlock_t event_lock; /* spinlock for fw ready status*/ + u32 nr_mem_region; + struct ath10k_msa_mem_region_info + mem_region[MAX_NUM_MEMORY_REGIONS]; + phys_addr_t msa_pa; + u32 msa_mem_size; + void *msa_va; + struct ath10k_qmi_chip_info chip_info; + struct ath10k_qmi_board_info board_info; + struct ath10k_qmi_soc_info soc_info; + struct ath10k_qmi_fw_version_info fw_version_info; + char fw_build_id[MAX_BUILD_ID_LEN + 1]; + struct ath10k_qmi_cal_data cal_data[MAX_NUM_CAL_V01]; +} *qmi; static int ath10k_qmi_map_msa_permissions(struct ath10k_msa_mem_region_info *mem_region) @@ -444,6 +467,207 @@ int ath10k_qmi_send_cal_report_req(struct ath10k_qmi *qmi) return ret; } +static int +ath10k_qmi_mode_send_sync_msg(enum wlfw_driver_mode_enum_v01 mode) +{ + struct wlfw_wlan_mode_resp_msg_v01 *resp; + struct wlfw_wlan_mode_req_msg_v01 *req; + struct qmi_txn txn; + int ret; + + req = kzalloc(sizeof(*req), GFP_KERNEL); + if (!req) + return -ENOMEM; + + resp = kzalloc(sizeof(*resp), GFP_KERNEL); + if (!resp) { + kfree(req); + return -ENOMEM; + } + + ret = qmi_txn_init(&qmi->qmi_hdl, &txn, + wlfw_wlan_mode_resp_msg_v01_ei, + resp); + if (ret < 0) { + pr_err("fail to init txn for mode req %d ret %d\n", mode, ret); + goto out; + } + + req->mode = mode; + req->hw_debug_valid = 1; + req->hw_debug = 0; + + ret = qmi_send_request(&qmi->qmi_hdl, NULL, &txn, + QMI_WLFW_WLAN_MODE_REQ_V01, + WLFW_WLAN_MODE_REQ_MSG_V01_MAX_MSG_LEN, + wlfw_wlan_mode_req_msg_v01_ei, req); + if (ret < 0) { + qmi_txn_cancel(&txn); + pr_err("send mode req failed, mode: %d ret: %d\n", + mode, ret); + goto out; + } + + ret = qmi_txn_wait(&txn, WLFW_TIMEOUT * HZ); + if (ret < 0) + goto out; + + if (resp->resp.result != QMI_RESULT_SUCCESS_V01) { + pr_err("qmi mode request rejected:"); + pr_err("mode:%d result:%d error:%d\n", + mode, resp->resp.result, resp->resp.error); + ret = resp->resp.result; + goto out; + } + + pr_debug("wlan Mode request completed, mode: %d\n", mode); + kfree(resp); + kfree(req); + return 0; + +out: + kfree(resp); + kfree(req); + return ret; +} + +static int +ath10k_qmi_cfg_send_sync_msg(struct wlfw_wlan_cfg_req_msg_v01 *data) +{ + struct wlfw_wlan_cfg_resp_msg_v01 *resp; + struct wlfw_wlan_cfg_req_msg_v01 *req; + struct qmi_txn txn; + int ret; + + req = kzalloc(sizeof(*req), GFP_KERNEL); + if (!req) + return -ENOMEM; + + resp = kzalloc(sizeof(*resp), GFP_KERNEL); + if (!resp) { + kfree(req); + return -ENOMEM; + } + + ret = qmi_txn_init(&qmi->qmi_hdl, &txn, + wlfw_wlan_cfg_resp_msg_v01_ei, + resp); + if (ret < 0) { + pr_err("fail to init txn for config req %d\n", ret); + goto out; + } + + memcpy(req, data, sizeof(*req)); + + ret = qmi_send_request(&qmi->qmi_hdl, NULL, &txn, + QMI_WLFW_WLAN_CFG_REQ_V01, + WLFW_WLAN_CFG_REQ_MSG_V01_MAX_MSG_LEN, + wlfw_wlan_cfg_req_msg_v01_ei, req); + if (ret < 0) { + qmi_txn_cancel(&txn); + pr_err("send config req failed %d\n", ret); + goto out; + } + + ret = qmi_txn_wait(&txn, WLFW_TIMEOUT * HZ); + if (ret < 0) + goto out; + + if (resp->resp.result != QMI_RESULT_SUCCESS_V01) { + pr_err("qmi cfg request rejected:"); + pr_err("result:%d error:%d\n", + resp->resp.result, resp->resp.error); + ret = resp->resp.result; + goto out; + } + + pr_debug("wlan config request completed\n"); + kfree(resp); + kfree(req); + return 0; + +out: + kfree(resp); + kfree(req); + return ret; +} + +int ath10k_qmi_wlan_enable(struct ath10k_qmi_wlan_enable_cfg *config, + enum ath10k_qmi_driver_mode mode, + const char *host_version) +{ + struct wlfw_wlan_cfg_req_msg_v01 req; + int ret; + u32 i; + + pr_debug("mode: %d, config: %p:\n", + mode, config); + memset(&req, 0, sizeof(req)); + if (!config) { + pr_err("wlan enable Config Invalid:%p\n", + config); + ret = -EINVAL; + return ret; + } + + req.host_version_valid = 0; + + req.tgt_cfg_valid = 1; + if (config->num_ce_tgt_cfg > QMI_WLFW_MAX_NUM_CE_V01) + req.tgt_cfg_len = QMI_WLFW_MAX_NUM_CE_V01; + else + req.tgt_cfg_len = config->num_ce_tgt_cfg; + for (i = 0; i < req.tgt_cfg_len; i++) { + req.tgt_cfg[i].pipe_num = config->ce_tgt_cfg[i].pipe_num; + req.tgt_cfg[i].pipe_dir = config->ce_tgt_cfg[i].pipe_dir; + req.tgt_cfg[i].nentries = config->ce_tgt_cfg[i].nentries; + req.tgt_cfg[i].nbytes_max = config->ce_tgt_cfg[i].nbytes_max; + req.tgt_cfg[i].flags = config->ce_tgt_cfg[i].flags; + } + + req.svc_cfg_valid = 1; + if (config->num_ce_svc_pipe_cfg > QMI_WLFW_MAX_NUM_SVC_V01) + req.svc_cfg_len = QMI_WLFW_MAX_NUM_SVC_V01; + else + req.svc_cfg_len = config->num_ce_svc_pipe_cfg; + for (i = 0; i < req.svc_cfg_len; i++) { + req.svc_cfg[i].service_id = config->ce_svc_cfg[i].service_id; + req.svc_cfg[i].pipe_dir = config->ce_svc_cfg[i].pipe_dir; + req.svc_cfg[i].pipe_num = config->ce_svc_cfg[i].pipe_num; + } + + req.shadow_reg_valid = 1; + if (config->num_shadow_reg_cfg > + QMI_WLFW_MAX_NUM_SHADOW_REG_V01) + req.shadow_reg_len = QMI_WLFW_MAX_NUM_SHADOW_REG_V01; + else + req.shadow_reg_len = config->num_shadow_reg_cfg; + + memcpy(req.shadow_reg, config->shadow_reg_cfg, + sizeof(struct wlfw_shadow_reg_cfg_s_v01) * req.shadow_reg_len); + + ret = ath10k_qmi_cfg_send_sync_msg(&req); + if (ret) { + pr_err("wlan qmi config send failed\n"); + return ret; + } + + ret = ath10k_qmi_mode_send_sync_msg(mode); + if (ret) { + pr_err("wlan qmi mode send failed\n"); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(ath10k_qmi_wlan_enable); + +int ath10k_qmi_wlan_disable(void) +{ + return ath10k_qmi_mode_send_sync_msg(QMI_WLFW_OFF_V01); +} +EXPORT_SYMBOL_GPL(ath10k_qmi_wlan_disable); + static int ath10k_qmi_cap_send_sync_msg(struct ath10k_qmi *qmi) { struct wlfw_cap_resp_msg_v01 *resp; diff --git a/drivers/net/wireless/ath/ath10k/qmi.h b/drivers/net/wireless/ath/ath10k/qmi.h index 94f14d4..4d456c8 100644 --- a/drivers/net/wireless/ath/ath10k/qmi.h +++ b/drivers/net/wireless/ath/ath10k/qmi.h @@ -29,6 +29,13 @@ enum ath10k_qmi_driver_event_type { ATH10K_QMI_EVENT_MAX, }; +enum ath10k_qmi_driver_mode { + QMI_MISSION, + QMI_FTM, + QMI_EPPING, + QMI_OFF, +}; + struct ath10k_msa_mem_region_info { u64 reg_addr; u32 size; @@ -59,28 +66,37 @@ struct ath10k_qmi_cal_data { u8 *data; }; -struct ath10k_qmi { - struct platform_device *pdev; - struct qmi_handle qmi_hdl; - struct sockaddr_qrtr sq; - bool fw_ready; - bool msa_ready; - struct work_struct work_svc_arrive; - struct work_struct work_svc_exit; - struct work_struct work_msa_ready; - struct workqueue_struct *event_wq; - spinlock_t event_lock; /* spinlock for fw ready status*/ - u32 nr_mem_region; - struct ath10k_msa_mem_region_info - mem_region[MAX_NUM_MEMORY_REGIONS]; - phys_addr_t msa_pa; - u32 msa_mem_size; - void *msa_va; - struct ath10k_qmi_chip_info chip_info; - struct ath10k_qmi_board_info board_info; - struct ath10k_qmi_soc_info soc_info; - struct ath10k_qmi_fw_version_info fw_version_info; - char fw_build_id[MAX_BUILD_ID_LEN + 1]; - struct ath10k_qmi_cal_data cal_data[MAX_NUM_CAL_V01]; +struct ath10k_tgt_pipe_cfg { + u32 pipe_num; + u32 pipe_dir; + u32 nentries; + u32 nbytes_max; + u32 flags; + u32 reserved; }; + +struct ath10k_svc_pipe_cfg { + u32 service_id; + u32 pipe_dir; + u32 pipe_num; +}; + +struct ath10k_shadow_reg_cfg { + u16 ce_id; + u16 reg_offset; +}; + +struct ath10k_qmi_wlan_enable_cfg { + u32 num_ce_tgt_cfg; + struct ath10k_tgt_pipe_cfg *ce_tgt_cfg; + u32 num_ce_svc_pipe_cfg; + struct ath10k_svc_pipe_cfg *ce_svc_cfg; + u32 num_shadow_reg_cfg; + struct ath10k_shadow_reg_cfg *shadow_reg_cfg; +}; + +int ath10k_qmi_wlan_enable(struct ath10k_qmi_wlan_enable_cfg *config, + enum ath10k_qmi_driver_mode mode, + const char *host_version); +int ath10k_qmi_wlan_disable(void); #endif /* _QMI_H_ */
Add qmi message required for enabling and disabling target to qmi server running in Q6. Signed-off-by: Govind Singh <govinds@codeaurora.org> --- drivers/net/wireless/ath/ath10k/qmi.c | 226 +++++++++++++++++++++++++++++++++- drivers/net/wireless/ath/ath10k/qmi.h | 62 ++++++---- 2 files changed, 264 insertions(+), 24 deletions(-)