Message ID | 1526556740-25494-3-git-send-email-vgarodia@codeaurora.org (mailing list archive) |
---|---|
State | Not Applicable, archived |
Delegated to: | Andy Gross |
Headers | show |
On Thu, May 17, 2018 at 05:02:18PM +0530, Vikash Garodia wrote: > Add a new routine to reset the ARM9 and brings it > out of reset. This is in preparation to add PIL > functionality in venus driver. > > Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org> > --- > drivers/media/platform/qcom/venus/firmware.c | 26 ++++++++++++++++++++++++ > drivers/media/platform/qcom/venus/firmware.h | 1 + > drivers/media/platform/qcom/venus/hfi_venus_io.h | 5 +++++ > 3 files changed, 32 insertions(+) > > diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c > index c4a5778..8f25375 100644 > --- a/drivers/media/platform/qcom/venus/firmware.c > +++ b/drivers/media/platform/qcom/venus/firmware.c > @@ -14,6 +14,7 @@ > > #include <linux/device.h> > #include <linux/firmware.h> > +#include <linux/delay.h> > #include <linux/kernel.h> > #include <linux/io.h> > #include <linux/of.h> > @@ -22,11 +23,36 @@ > #include <linux/sizes.h> > #include <linux/soc/qcom/mdt_loader.h> > > +#include "core.h" > #include "firmware.h" > +#include "hfi_venus_io.h" > > #define VENUS_PAS_ID 9 > #define VENUS_FW_MEM_SIZE (6 * SZ_1M) > > +void venus_reset_hw(struct venus_core *core) > +{ > + void __iomem *reg_base = core->base; > + > + writel(0, reg_base + WRAPPER_FW_START_ADDR); > + writel(VENUS_FW_MEM_SIZE, reg_base + WRAPPER_FW_END_ADDR); > + writel(0, reg_base + WRAPPER_CPA_START_ADDR); > + writel(VENUS_FW_MEM_SIZE, reg_base + WRAPPER_CPA_END_ADDR); > + writel(0x0, reg_base + WRAPPER_CPU_CGC_DIS); > + writel(0x0, reg_base + WRAPPER_CPU_CLOCK_CONFIG); If you are going to have a bunch of writel() functions followed by a barrier it wouldn't hurt to use writel_relaxed() instead. Jordan > + /* Make sure all register writes are committed. */ > + mb(); > + > + /* > + * Need to wait 10 cycles of internal clocks before bringing ARM9 > + * out of reset. > + */ > + udelay(1); > + > + /* Bring Arm9 out of reset */ > + writel_relaxed(0, reg_base + WRAPPER_A9SS_SW_RESET); > +} > int venus_boot(struct device *dev, const char *fwname) > { > const struct firmware *mdt; > diff --git a/drivers/media/platform/qcom/venus/firmware.h b/drivers/media/platform/qcom/venus/firmware.h > index 428efb5..d56f5b2 100644 > --- a/drivers/media/platform/qcom/venus/firmware.h > +++ b/drivers/media/platform/qcom/venus/firmware.h > @@ -18,5 +18,6 @@ > > int venus_boot(struct device *dev, const char *fwname); > int venus_shutdown(struct device *dev); > +void venus_reset_hw(struct venus_core *core); > > #endif > diff --git a/drivers/media/platform/qcom/venus/hfi_venus_io.h b/drivers/media/platform/qcom/venus/hfi_venus_io.h > index 76f4793..39afa5d 100644 > --- a/drivers/media/platform/qcom/venus/hfi_venus_io.h > +++ b/drivers/media/platform/qcom/venus/hfi_venus_io.h > @@ -109,6 +109,11 @@ > #define WRAPPER_CPU_CGC_DIS (WRAPPER_BASE + 0x2010) > #define WRAPPER_CPU_STATUS (WRAPPER_BASE + 0x2014) > #define WRAPPER_SW_RESET (WRAPPER_BASE + 0x3000) > +#define WRAPPER_CPA_START_ADDR (WRAPPER_BASE + 0x1020) > +#define WRAPPER_CPA_END_ADDR (WRAPPER_BASE + 0x1024) > +#define WRAPPER_FW_START_ADDR (WRAPPER_BASE + 0x1028) > +#define WRAPPER_FW_END_ADDR (WRAPPER_BASE + 0x102C) > +#define WRAPPER_A9SS_SW_RESET (WRAPPER_BASE + 0x3000) > > /* Venus 4xx */ > #define WRAPPER_VCODEC0_MMCC_POWER_STATUS (WRAPPER_BASE + 0x90)
diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c index c4a5778..8f25375 100644 --- a/drivers/media/platform/qcom/venus/firmware.c +++ b/drivers/media/platform/qcom/venus/firmware.c @@ -14,6 +14,7 @@ #include <linux/device.h> #include <linux/firmware.h> +#include <linux/delay.h> #include <linux/kernel.h> #include <linux/io.h> #include <linux/of.h> @@ -22,11 +23,36 @@ #include <linux/sizes.h> #include <linux/soc/qcom/mdt_loader.h> +#include "core.h" #include "firmware.h" +#include "hfi_venus_io.h" #define VENUS_PAS_ID 9 #define VENUS_FW_MEM_SIZE (6 * SZ_1M) +void venus_reset_hw(struct venus_core *core) +{ + void __iomem *reg_base = core->base; + + writel(0, reg_base + WRAPPER_FW_START_ADDR); + writel(VENUS_FW_MEM_SIZE, reg_base + WRAPPER_FW_END_ADDR); + writel(0, reg_base + WRAPPER_CPA_START_ADDR); + writel(VENUS_FW_MEM_SIZE, reg_base + WRAPPER_CPA_END_ADDR); + writel(0x0, reg_base + WRAPPER_CPU_CGC_DIS); + writel(0x0, reg_base + WRAPPER_CPU_CLOCK_CONFIG); + + /* Make sure all register writes are committed. */ + mb(); + + /* + * Need to wait 10 cycles of internal clocks before bringing ARM9 + * out of reset. + */ + udelay(1); + + /* Bring Arm9 out of reset */ + writel_relaxed(0, reg_base + WRAPPER_A9SS_SW_RESET); +} int venus_boot(struct device *dev, const char *fwname) { const struct firmware *mdt; diff --git a/drivers/media/platform/qcom/venus/firmware.h b/drivers/media/platform/qcom/venus/firmware.h index 428efb5..d56f5b2 100644 --- a/drivers/media/platform/qcom/venus/firmware.h +++ b/drivers/media/platform/qcom/venus/firmware.h @@ -18,5 +18,6 @@ int venus_boot(struct device *dev, const char *fwname); int venus_shutdown(struct device *dev); +void venus_reset_hw(struct venus_core *core); #endif diff --git a/drivers/media/platform/qcom/venus/hfi_venus_io.h b/drivers/media/platform/qcom/venus/hfi_venus_io.h index 76f4793..39afa5d 100644 --- a/drivers/media/platform/qcom/venus/hfi_venus_io.h +++ b/drivers/media/platform/qcom/venus/hfi_venus_io.h @@ -109,6 +109,11 @@ #define WRAPPER_CPU_CGC_DIS (WRAPPER_BASE + 0x2010) #define WRAPPER_CPU_STATUS (WRAPPER_BASE + 0x2014) #define WRAPPER_SW_RESET (WRAPPER_BASE + 0x3000) +#define WRAPPER_CPA_START_ADDR (WRAPPER_BASE + 0x1020) +#define WRAPPER_CPA_END_ADDR (WRAPPER_BASE + 0x1024) +#define WRAPPER_FW_START_ADDR (WRAPPER_BASE + 0x1028) +#define WRAPPER_FW_END_ADDR (WRAPPER_BASE + 0x102C) +#define WRAPPER_A9SS_SW_RESET (WRAPPER_BASE + 0x3000) /* Venus 4xx */ #define WRAPPER_VCODEC0_MMCC_POWER_STATUS (WRAPPER_BASE + 0x90)
Add a new routine to reset the ARM9 and brings it out of reset. This is in preparation to add PIL functionality in venus driver. Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org> --- drivers/media/platform/qcom/venus/firmware.c | 26 ++++++++++++++++++++++++ drivers/media/platform/qcom/venus/firmware.h | 1 + drivers/media/platform/qcom/venus/hfi_venus_io.h | 5 +++++ 3 files changed, 32 insertions(+)