| Message ID | 1527013340-8036-1-git-send-email-j-keerthy@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* Keerthy <j-keerthy@ti.com> [180522 11:24]: > Add the save and restore for clksrc as part of suspend and resume > so that it saves the counter value and restores. This is needed in > modes like rtc+ddr in self-refresh not doing this stalls the time. Can't we now do this all in drivers/clocksource/timer-ti-*.c? > @@ -490,6 +513,15 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id, > res = omap_dm_timer_init_one(&clksrc, fck_source, property, > &clocksource_gpt.name, > OMAP_TIMER_NONPOSTED); > + > + if (soc_is_am43xx()) { > + clocksource_gpt.suspend = omap2_gptimer_clksrc_suspend; > + clocksource_gpt.resume = omap2_gptimer_clksrc_resume; > + > + clocksource_gpt_hwmod = > + omap_hwmod_lookup(clocksource_gpt.name); > + } > + Then you can do this based on a quirk flag set by compatible. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 5/24/2018 12:11 AM, Tony Lindgren wrote: > * Keerthy <j-keerthy@ti.com> [180522 11:24]: >> Add the save and restore for clksrc as part of suspend and resume >> so that it saves the counter value and restores. This is needed in >> modes like rtc+ddr in self-refresh not doing this stalls the time. > Can't we now do this all in drivers/clocksource/timer-ti-*.c? arch/arm/boot/dts/am4372.dtsi has compatible ti,omap-counter32k which is arch/arm/mach-omap2/timer.c compatible IMHO clocksource suspend resume best fits under mach-omap2/timer.c just like clockevent has suspend/resume. > >> @@ -490,6 +513,15 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id, >> res = omap_dm_timer_init_one(&clksrc, fck_source, property, >> &clocksource_gpt.name, >> OMAP_TIMER_NONPOSTED); >> + >> + if (soc_is_am43xx()) { >> + clocksource_gpt.suspend = omap2_gptimer_clksrc_suspend; >> + clocksource_gpt.resume = omap2_gptimer_clksrc_resume; >> + >> + clocksource_gpt_hwmod = >> + omap_hwmod_lookup(clocksource_gpt.name); >> + } >> + > Then you can do this based on a quirk flag set by compatible. > > Regards, > > Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* J, KEERTHY <j-keerthy@ti.com> [180523 20:40]: > > > On 5/24/2018 12:11 AM, Tony Lindgren wrote: > > * Keerthy <j-keerthy@ti.com> [180522 11:24]: > > > Add the save and restore for clksrc as part of suspend and resume > > > so that it saves the counter value and restores. This is needed in > > > modes like rtc+ddr in self-refresh not doing this stalls the time. > > Can't we now do this all in drivers/clocksource/timer-ti-*.c? > > arch/arm/boot/dts/am4372.dtsi has compatible ti,omap-counter32k > which is arch/arm/mach-omap2/timer.c compatible Oh OK. > IMHO clocksource suspend resume best fits under mach-omap2/timer.c > just like clockevent has suspend/resume. Yup you're right. Applying into omap-for-v4.18/soc thanks. No guarantees at this point it will get merged though. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 5a70ab6..98ed5ac 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -70,6 +70,9 @@ /* Clockevent hwmod for am335x and am437x suspend */ static struct omap_hwmod *clockevent_gpt_hwmod; +/* Clockesource hwmod for am437x suspend */ +static struct omap_hwmod *clocksource_gpt_hwmod; + #ifdef CONFIG_SOC_HAS_REALTIME_COUNTER static unsigned long arch_timer_freq; @@ -478,6 +481,26 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void) return ret; } +static unsigned int omap2_gptimer_clksrc_load; + +static void omap2_gptimer_clksrc_suspend(struct clocksource *unused) +{ + omap2_gptimer_clksrc_load = + __omap_dm_timer_read_counter(&clksrc, OMAP_TIMER_NONPOSTED); + + omap_hwmod_idle(clocksource_gpt_hwmod); +} + +static void omap2_gptimer_clksrc_resume(struct clocksource *unused) +{ + omap_hwmod_enable(clocksource_gpt_hwmod); + + __omap_dm_timer_load_start(&clksrc, + OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, + omap2_gptimer_clksrc_load, + OMAP_TIMER_NONPOSTED); +} + static void __init omap2_gptimer_clocksource_init(int gptimer_id, const char *fck_source, const char *property) @@ -490,6 +513,15 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id, res = omap_dm_timer_init_one(&clksrc, fck_source, property, &clocksource_gpt.name, OMAP_TIMER_NONPOSTED); + + if (soc_is_am43xx()) { + clocksource_gpt.suspend = omap2_gptimer_clksrc_suspend; + clocksource_gpt.resume = omap2_gptimer_clksrc_resume; + + clocksource_gpt_hwmod = + omap_hwmod_lookup(clocksource_gpt.name); + } + BUG_ON(res); __omap_dm_timer_load_start(&clksrc,
Add the save and restore for clksrc as part of suspend and resume so that it saves the counter value and restores. This is needed in modes like rtc+ddr in self-refresh not doing this stalls the time. Signed-off-by: Keerthy <j-keerthy@ti.com> --- Changes in v2: * Instead of everytime looking up for clksrc hwmod doing it once during init * Tested on am437x-gp-evm Probably too late for 4.18! arch/arm/mach-omap2/timer.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+)