| Message ID | 20180530141133.3711-7-faiz_abbas@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* Faiz Abbas <faiz_abbas@ti.com> [180530 14:12]: > From: Franklin S Cooper Jr <fcooper@ti.com> > > Add support for the MCAN peripheral which supports both classic > CAN messages along with the new CAN-FD message. ... > --- a/arch/arm/boot/dts/dra76x.dtsi > +++ b/arch/arm/boot/dts/dra76x.dtsi > @@ -27,6 +27,21 @@ > ti,syss-mask = <1>; > clocks = <&wkupaon_clkctrl DRA7_ADC_CLKCTRL 0>; > clock-names = "fck"; > + > + m_can0: mcan@42c01a00 { > + compatible = "bosch,m_can"; > + reg = <0x1a00 0x4000>, <0x0 0x18FC>; > + reg-names = "m_can", "message_ram"; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "int0", "int1"; > + ti,hwmods = "mcan"; The "ti,hwmods" should be in the parent node now. But you may not even need it, see the reset comment I made for the parent node patch. > + clocks = <&mcan_clk>, <&l3_iclk_div>; > + clock-names = "cclk", "hclk"; > + bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>; > + status = "disabled"; And then you should be able to also leave out status = "disabled" as the hardware is there for sure and we can idle it. Then a board specific dts file can set it to "disabled" if reallly needed. Setting everything manually to "disabled" and then again to "enabled" is the wrong way around, the default is "enabled". Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index 2deb96405d06..277765257410 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -404,3 +404,10 @@ phys = <&pcie1_phy>, <&pcie2_phy>; phy-names = "pcie-phy0", "pcie-phy1"; }; + +&m_can0 { + status = "okay"; + can-transceiver { + max-bitrate = <5000000>; + }; +}; diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi index 57b8dc0fe719..d7a8cc569808 100644 --- a/arch/arm/boot/dts/dra76x.dtsi +++ b/arch/arm/boot/dts/dra76x.dtsi @@ -27,6 +27,21 @@ ti,syss-mask = <1>; clocks = <&wkupaon_clkctrl DRA7_ADC_CLKCTRL 0>; clock-names = "fck"; + + m_can0: mcan@42c01a00 { + compatible = "bosch,m_can"; + reg = <0x1a00 0x4000>, <0x0 0x18FC>; + reg-names = "m_can", "message_ram"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + ti,hwmods = "mcan"; + clocks = <&mcan_clk>, <&l3_iclk_div>; + clock-names = "cclk", "hclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>; + status = "disabled"; + }; }; };