@@ -783,6 +783,8 @@ static int drm_atomic_plane_set_property(struct drm_plane *plane,
state->src_w = val;
} else if (property == config->prop_src_h) {
state->src_h = val;
+ } else if (property == plane->blend_mode_property) {
+ state->pixel_blend_mode = val;
} else if (property == plane->rotation_property) {
if (!is_power_of_2(val & DRM_MODE_ROTATE_MASK))
return -EINVAL;
@@ -848,6 +850,8 @@ static int drm_atomic_plane_set_property(struct drm_plane *plane,
*val = state->src_w;
} else if (property == config->prop_src_h) {
*val = state->src_h;
+ } else if (property == plane->blend_mode_property) {
+ *val = state->pixel_blend_mode;
} else if (property == plane->rotation_property) {
*val = state->rotation;
} else if (property == plane->zpos_property) {
@@ -3484,6 +3484,7 @@ void drm_atomic_helper_plane_reset(struct drm_plane *plane)
if (plane->state) {
plane->state->plane = plane;
plane->state->rotation = DRM_MODE_ROTATE_0;
+ plane->state->pixel_blend_mode = DRM_MODE_BLEND_PREMULTI;
}
}
EXPORT_SYMBOL(drm_atomic_helper_plane_reset);
@@ -100,6 +100,41 @@
* planes. Without this property the primary plane is always below the cursor
* plane, and ordering between all other planes is undefined.
*
+ * pixel blend mode:
+ * Pixel blend mode is set up with drm_plane_create_blend_mode_property().
+ * It adds a blend mode for alpha blending equation selection, describing
+ * how the pixels from the current plane are composited with the
+ * background.
+ *
+ * Three alpha blending equations(note that the fg.rgb or bg.rgb notation
+ * means each of the R, G or B channels for the foreground and background
+ * colors, respectively):
+ *
+ * "None": Blend formula that ignores the pixel alpha.
+ * out.rgb = plane_alpha * fg.rgb + (1 - plane_alpha) * bg.rgb
+ *
+ * "Pre-multiplied": Blend formula that assumes the pixel color values
+ * have been already pre-multiplied with the alpha
+ * channel values.
+ * out.rgb = plane_alpha * fg.rgb + (1 - (plane_alpha * fg.alpha)) * bg.rgb
+ *
+ * "Coverage": Blend formula that assumes the pixel color values have not
+ * been pre-multiplied and will do so when blending them to the background
+ * color values.
+ * out.rgb = plane_alpha * fg.alpha * fg.rgb +
+ * (1 - (plane_alpha * fg.alpha)) * bg.rgb
+ *
+ * fg.rgb: Each of the RGB component values from the plane's pixel
+ * fg.alpha: Alpha component value from the plane's pixel
+ * bg.rgb: Each of the RGB component values from the background
+ * plane_alpha: Plane alpha value set by the plane alpha property (if
+ * applicable).
+ *
+ * This property has no effect on formats with no pixel alpha, as fg.alpha
+ * is assumed to be 1.0. If the plane does not expose the "alpha" property,
+ * then plane_alpha is assumed to be 1.0, otherwise, it is the value of the
+ * "alpha" property.
+ *
* Note that all the property extensions described here apply either to the
* plane or the CRTC (e.g. for the background color, which currently is not
* exposed and assumed to be black).
@@ -409,3 +444,78 @@ int drm_atomic_normalize_zpos(struct drm_device *dev,
return 0;
}
EXPORT_SYMBOL(drm_atomic_normalize_zpos);
+
+/**
+ * drm_plane_create_blend_mode_property - create a new blend mode property
+ * @plane: drm plane
+ * @supported_modes: bitmask of supported modes, must include
+ * BIT(DRM_MODE_BLEND_PREMULTI)
+ *
+ * This creates a new property describing the blend mode.
+ *
+ * The property exposed to userspace is an enumeration property (see
+ * drm_property_create_enum()) called "pixel blend mode" and has the
+ * following enumeration values:
+ *
+ * "None": Blend formula that ignores the pixel alpha.
+ *
+ * "Pre-multiplied": Blend formula that assumes the pixel color values have
+ * been already pre-multiplied with the alpha channel values.
+ *
+ * "Coverage": Blend formula that assumes the pixel color values have not been
+ * pre-multiplied and will do so when blending them to the
+ * background color values.
+ *
+ * RETURNS:
+ * Zero for success or -errno
+ */
+int drm_plane_create_blend_mode_property(struct drm_plane *plane,
+ unsigned int supported_modes)
+{
+ struct drm_device *dev = plane->dev;
+ struct drm_property *prop;
+ static const struct drm_prop_enum_list props[] = {
+ { DRM_MODE_BLEND_PIXEL_NONE, "None" },
+ { DRM_MODE_BLEND_PREMULTI, "Pre-multiplied" },
+ { DRM_MODE_BLEND_COVERAGE, "Coverage" },
+ };
+ unsigned int valid_mode_mask = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+ BIT(DRM_MODE_BLEND_PREMULTI) |
+ BIT(DRM_MODE_BLEND_COVERAGE);
+ int i, j = 0;
+
+ if (WARN_ON((supported_modes & ~valid_mode_mask) ||
+ ((supported_modes & BIT(DRM_MODE_BLEND_PREMULTI)) == 0)))
+ return -EINVAL;
+
+ prop = drm_property_create(dev, DRM_MODE_PROP_ENUM,
+ "pixel blend mode",
+ hweight32(supported_modes));
+ if (!prop)
+ return -ENOMEM;
+
+ for (i = 0; i < ARRAY_SIZE(props); i++) {
+ int ret;
+
+ if (!(BIT(props[i].type) & supported_modes))
+ continue;
+
+ ret = drm_property_add_enum(prop, j++, props[i].type,
+ props[i].name);
+
+ if (ret) {
+ drm_property_destroy(dev, prop);
+
+ return ret;
+ }
+ }
+
+ drm_object_attach_property(&plane->base, prop, DRM_MODE_BLEND_PREMULTI);
+ plane->blend_mode_property = prop;
+
+ if (plane->state)
+ plane->state->pixel_blend_mode = DRM_MODE_BLEND_PREMULTI;
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_plane_create_blend_mode_property);
@@ -27,6 +27,10 @@
#include <linux/ctype.h>
#include <drm/drm_mode.h>
+#define DRM_MODE_BLEND_PIXEL_NONE 0
+#define DRM_MODE_BLEND_PREMULTI 1
+#define DRM_MODE_BLEND_COVERAGE 2
+
struct drm_device;
struct drm_atomic_state;
struct drm_plane;
@@ -49,4 +53,6 @@ int drm_plane_create_zpos_immutable_property(struct drm_plane *plane,
unsigned int zpos);
int drm_atomic_normalize_zpos(struct drm_device *dev,
struct drm_atomic_state *state);
+int drm_plane_create_blend_mode_property(struct drm_plane *plane,
+ unsigned int supported_modes);
#endif
@@ -43,6 +43,8 @@
* plane (in 16.16)
* @src_w: width of visible portion of plane (in 16.16)
* @src_h: height of visible portion of plane (in 16.16)
+ * @pixel_blend_mode: how the plane's framebuffer alpha channel is used when
+ * blending with the background colour.
* @rotation: rotation of the plane
* @zpos: priority of the given plane on crtc (optional)
* Note that multiple active planes on the same crtc can have an identical
@@ -106,6 +108,8 @@ struct drm_plane_state {
uint32_t src_x, src_y;
uint32_t src_h, src_w;
+ uint16_t pixel_blend_mode;
+
/* Plane rotation */
unsigned int rotation;
@@ -498,6 +502,7 @@ enum drm_plane_type {
* @type: type of plane (overlay, primary, cursor)
* @zpos_property: zpos property for this plane
* @rotation_property: rotation property for this plane
+ * @blend_mode_property: blend mode property for this plane
* @helper_private: mid-layer private data
*/
struct drm_plane {
@@ -573,6 +578,7 @@ struct drm_plane {
struct drm_property *zpos_property;
struct drm_property *rotation_property;
+ struct drm_property *blend_mode_property;
/**
* @color_encoding_property:
Pixel blend modes represent the alpha blending equation selection, describing how the pixels from the current plane are composited with the background. Add a pixel_blend_mode to drm_plane_state and a blend_mode_property to drm_plane, and related support functions. Defines three blend modes in drm_blend.h. Signed-off-by: Lowry Li <lowry.li@arm.com> --- drivers/gpu/drm/drm_atomic.c | 4 ++ drivers/gpu/drm/drm_atomic_helper.c | 1 + drivers/gpu/drm/drm_blend.c | 110 ++++++++++++++++++++++++++++++++++++ include/drm/drm_blend.h | 6 ++ include/drm/drm_plane.h | 6 ++ 5 files changed, 127 insertions(+)