@@ -11,7 +11,7 @@ Description:
Kernel code may export it for complete or partial access.
GPIOs are identified as they are inside the kernel, using integers in
- the range 0..INT_MAX. See Documentation/gpio/gpio.txt for more information.
+ the range 0..INT_MAX. See Documentation/gpio for more information.
/sys/class/gpio
/export ... asks the kernel to export a GPIO to userspace
@@ -30,7 +30,7 @@ Optional properties:
- nxp,calib-gpios: calibration GPIO, which must correspond with the
gpio used for the TDA998x interrupt pin.
-[1] Documentation/sound/alsa/soc/DAI.txt
+[1] Documentation/sound/soc/dai.rst
[2] include/dt-bindings/display/tda998x.h
Example:
@@ -8,7 +8,7 @@ Event Tracing
1. Introduction
===============
-Tracepoints (see Documentation/trace/tracepoints.txt) can be used
+Tracepoints (see Documentation/trace/tracepoints.rst) can be used
without creating custom kernel modules to register probe functions
using the event tracing infrastructure.
@@ -6,7 +6,7 @@ Notes on Analysing Behaviour Using Events and Tracepoints
1. Introduction
===============
-Tracepoints (see Documentation/trace/tracepoints.txt) can be used without
+Tracepoints (see Documentation/trace/tracepoints.rst) can be used without
creating custom kernel modules to register probe functions using the event
tracing infrastructure.
@@ -107,7 +107,7 @@ Linux 2.6:
程序测试的指导，请参阅
Documentation/power/drivers-testing.txt。有关驱动程序电
源管理问题相对全面的概述，请参阅
- Documentation/power/admin-guide/devices.rst。
+ Documentation/driver-api/pm/devices.rst。
管理： 如果一个驱动程序的作者还在进行有效的维护，那么通常除了那
些明显正确且不需要任何检查的补丁以外，其他所有的补丁都会
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/gpio.txt
+Chinese translated version of Documentation/gpio
If you have any comment or update to the content, please contact the
original document maintainer directly. However, if you have a problem
@@ -10,7 +10,7 @@ Maintainer: Grant Likely <grant.likely@secretlab.ca>
Linus Walleij <linus.walleij@linaro.org>
Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
---------------------------------------------------------------------
-Documentation/gpio.txt 的中文翻译
+Documentation/gpio 的中文翻译
如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
@@ -13312,7 +13312,7 @@ L: alsa-devel@alsa-project.org (moderated for non-subscribers)
W: http://alsa-project.org/main/index.php/ASoC
S: Supported
F: Documentation/devicetree/bindings/sound/
-F: Documentation/sound/alsa/soc/
+F: Documentation/sound/soc/
F: sound/soc/
F: include/sound/soc*
@@ -14,7 +14,7 @@ config USB_HID
You can't use this driver and the HIDBP (Boot Protocol) keyboard
and mouse drivers at the same time. More information is available:
- <file:Documentation/input/input.txt>.
+ <file:Documentation/input/input.rst>.
If unsure, say Y.
@@ -16,7 +16,7 @@ config INPUT
Say N here if you have a headless (no monitor, no keyboard) system.
- More information is available: <file:Documentation/input/input.txt>
+ More information is available: <file:Documentation/input/input.rst>
If unsure, say Y.
@@ -144,7 +144,7 @@ config INPUT_JOYDEV
If unsure, say Y.
- More information is available: <file:Documentation/input/joystick.txt>
+ More information is available: <file:Documentation/input/joydev/joystick.rst>
To compile this driver as a module, choose M here: the
module will be called joydev.
@@ -9,7 +9,7 @@ menuconfig INPUT_JOYSTICK
and the list of supported devices will be displayed. This option
doesn't affect the kernel.
- Please read the file <file:Documentation/input/joystick.txt> which
+ Please read the file <file:Documentation/input/joydev/joystick.rst> which
contains more information.
if INPUT_JOYSTICK
@@ -25,7 +25,7 @@ config JOYSTICK_ANALOG
Flightstick Pro, ThrustMaster FCS, 6 and 8 button gamepads, or
Saitek Cyborg joysticks.
- Please read the file <file:Documentation/input/joystick.txt> which
+ Please read the file <file:Documentation/input/joydev/joystick.rst> which
contains more information.
To compile this driver as a module, choose M here: the
@@ -27,6 +27,6 @@ config JOYSTICK_IFORCE_232
connected to your serial (COM) port.
You will need an additional utility called inputattach, see
- <file:Documentation/input/joystick.txt>
- and <file:Documentation/input/ff.txt>.
+ <file:Documentation/input/joydev/joystick.rst>
+ and <file:Documentation/input/ff.rst>.
@@ -47,7 +47,7 @@ config SERIO_SERPORT
Say Y here if you plan to use an input device (mouse, joystick,
tablet, 6dof) that communicates over the RS232 serial (COM) port.
- More information is available: <file:Documentation/input/input.txt>
+ More information is available: <file:Documentation/input/input.rst>
If unsure, say Y.
@@ -78,7 +78,7 @@ config SERIO_PARKBD
Say Y here if you built a simple parallel port adapter to attach
an additional AT keyboard, XT keyboard or PS/2 mouse.
- More information is available: <file:Documentation/input/input.txt>
+ More information is available: <file:Documentation/input/input.rst>
If unsure, say N.
@@ -11,7 +11,7 @@ pool management for network interfaces.
This document provides an overview the Linux DPIO driver, its
subcomponents, and its APIs.
-See Documentation/dpaa2/overview.txt for a general overview of DPAA2
+See Documentation/networking/dpaa2/overview.rst for a general overview of DPAA2
and the general DPAA2 driver architecture in Linux.
Driver Overview
@@ -836,7 +836,7 @@ static void xxxfb_remove(struct pci_dev *dev)
* @dev: PCI device
* @msg: the suspend event code.
*
- * See Documentation/power/admin-guide/devices.rst for more information
+ * See Documentation/driver-api/pm/devices.rst for more information
*/
static int xxxfb_suspend(struct pci_dev *dev, pm_message_t msg)
{
@@ -851,7 +851,7 @@ static int xxxfb_suspend(struct pci_dev *dev, pm_message_t msg)
* xxxfb_resume - Optional but recommended function. Resume the device.
* @dev: PCI device
*
- * See Documentation/power/admin-guide/devices.rst for more information
+ * See Documentation/driver-api/pm/devices.rst for more information
*/
static int xxxfb_resume(struct pci_dev *dev)
{
@@ -915,7 +915,7 @@ static void __exit xxxfb_exit(void)
* @dev: platform device
* @msg: the suspend event code.
*
- * See Documentation/power/admin-guide/devices.rst for more information
+ * See Documentation/driver-api/pm/devices.rst for more information
*/
static int xxxfb_suspend(struct platform_device *dev, pm_message_t msg)
{
@@ -930,7 +930,7 @@ static int xxxfb_suspend(struct platform_device *dev, pm_message_t msg)
* xxxfb_resume - Optional but recommended function. Resume the device.
* @dev: platform device
*
- * See Documentation/power/admin-guide/devices.rst for more information
+ * See Documentation/driver-api/pm/devices.rst for more information
*/
static int xxxfb_resume(struct platform_dev *dev)
{
@@ -4,7 +4,7 @@
/*
* Kernel Tracepoint API.
*
- * See Documentation/trace/tracepoints.txt.
+ * See Documentation/trace/tracepoints.rst.
*
* Copyright (C) 2008-2014 Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
*
@@ -509,7 +509,7 @@ static inline int may_allow_all(struct dev_cgroup *parent)
* This is one of the three key functions for hierarchy implementation.
* This function is responsible for re-evaluating all the cgroup's active
* exceptions due to a parent's exception change.
- * Refer to Documentation/cgroups/devices.txt for more details.
+ * Refer to Documentation/cgroup-v1/devices.txt for more details.
*/
static void revalidate_active_exceptions(struct dev_cgroup *devcg)
{