| Message ID | 20180619163228.13790-3-venu.busireddy@oracle.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 2018-06-19 20:24:12 +0300, Michael S. Tsirkin wrote: > On Tue, Jun 19, 2018 at 11:32:26AM -0500, Venu Busireddy wrote: > > Add a "Vendor-Specific" capability to the PCIe bridge, to contain the > > "Group Identifier" (UUID) that will be used to pair a virtio device with > > the passthrough device attached to that bridge. > > > > This capability is added to the bridge iff the "uuid" option is specified > > for the bridge device, via the qemu command line. Also, the bridge's > > Device ID is changed to PCI_VENDOR_ID_REDHAT, and Vendor ID is changed > > to PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE (from the default values), when the > > "uuid" option is present. > > > > Signed-off-by: Venu Busireddy <venu.busireddy@oracle.com> > > I don't see why we should add it to all bridges. > Let's just add it to ones that already have the RH vendor ID? No. I am not adding the capability to all bridges. In the earlier discussions, we agreed that the bridge be left as Intel bridge if we do not intend to use it for storing the pairing information. If we do intend to store the pairing information in the bridge, we wanted to change the bridge's Vendor ID to RH Vendor ID to avoid confusion. In other words, bridge's with RH Vendor ID come into existence only when there is an intent to store the pairing information in the bridge. Accordingly, if the "uuid" option is specified for the bridge, it is assumed that the user intends to use the bridge for storing the pairing information, and hence, the capability is added to the bridge, and the Vendor ID is changed to RH Vendor ID. If the "uuid" option is not specified, the bridge remains as Intel bridge, and without the vendor-specific capability. Venu > > > > --- > > hw/pci-bridge/ioh3420.c | 2 ++ > > hw/pci-bridge/pcie_root_port.c | 7 +++++++ > > hw/pci/pci_bridge.c | 32 ++++++++++++++++++++++++++++++++ > > include/hw/pci/pci.h | 2 ++ > > include/hw/pci/pcie.h | 1 + > > include/hw/pci/pcie_port.h | 1 + > > 6 files changed, 45 insertions(+) > > > > diff --git a/hw/pci-bridge/ioh3420.c b/hw/pci-bridge/ioh3420.c > > index a451d74ee6..b6b9ebc726 100644 > > --- a/hw/pci-bridge/ioh3420.c > > +++ b/hw/pci-bridge/ioh3420.c > > @@ -35,6 +35,7 @@ > > #define IOH_EP_MSI_SUPPORTED_FLAGS PCI_MSI_FLAGS_MASKBIT > > #define IOH_EP_MSI_NR_VECTOR 2 > > #define IOH_EP_EXP_OFFSET 0x90 > > +#define IOH_EP_VENDOR_OFFSET 0xCC > > #define IOH_EP_AER_OFFSET 0x100 > > > > /* > > @@ -111,6 +112,7 @@ static void ioh3420_class_init(ObjectClass *klass, void *data) > > rpc->exp_offset = IOH_EP_EXP_OFFSET; > > rpc->aer_offset = IOH_EP_AER_OFFSET; > > rpc->ssvid_offset = IOH_EP_SSVID_OFFSET; > > + rpc->vendor_offset = IOH_EP_VENDOR_OFFSET; > > rpc->ssid = IOH_EP_SSVID_SSID; > > } > > > > diff --git a/hw/pci-bridge/pcie_root_port.c b/hw/pci-bridge/pcie_root_port.c > > index 45f9e8cd4a..ba470c7fda 100644 > > --- a/hw/pci-bridge/pcie_root_port.c > > +++ b/hw/pci-bridge/pcie_root_port.c > > @@ -71,6 +71,12 @@ static void rp_realize(PCIDevice *d, Error **errp) > > goto err_bridge; > > } > > > > + rc = pci_bridge_vendor_init(d, rpc->vendor_offset, errp); > > + if (rc < 0) { > > + error_append_hint(errp, "Can't init group ID, error %d\n", rc); > > + goto err_bridge; > > + } > > + > > if (rpc->interrupts_init) { > > rc = rpc->interrupts_init(d, errp); > > if (rc < 0) { > > @@ -137,6 +143,7 @@ static void rp_exit(PCIDevice *d) > > static Property rp_props[] = { > > DEFINE_PROP_BIT(COMPAT_PROP_PCP, PCIDevice, cap_present, > > QEMU_PCIE_SLTCAP_PCP_BITNR, true), > > + DEFINE_PROP_UUID(COMPAT_PROP_UUID, PCIDevice, uuid, false), > > DEFINE_PROP_END_OF_LIST() > > }; > > > > diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c > > index 40a39f57cb..c63bc439f7 100644 > > --- a/hw/pci/pci_bridge.c > > +++ b/hw/pci/pci_bridge.c > > @@ -34,12 +34,17 @@ > > #include "hw/pci/pci_bus.h" > > #include "qemu/range.h" > > #include "qapi/error.h" > > +#include "qemu/uuid.h" > > > > /* PCI bridge subsystem vendor ID helper functions */ > > #define PCI_SSVID_SIZEOF 8 > > #define PCI_SSVID_SVID 4 > > #define PCI_SSVID_SSID 6 > > > > +#define PCI_VENDOR_SIZEOF 20 > > +#define PCI_VENDOR_CAP_LEN_OFFSET 2 > > +#define PCI_VENDOR_GROUP_ID_OFFSET 4 > > + > > int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset, > > uint16_t svid, uint16_t ssid, > > Error **errp) > > @@ -57,6 +62,33 @@ int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset, > > return pos; > > } > > > > +int pci_bridge_vendor_init(PCIDevice *d, uint8_t offset, Error **errp) > > +{ > > + int pos; > > + PCIDeviceClass *dc = PCI_DEVICE_GET_CLASS(d); > > + > > + if (qemu_uuid_is_null(&d->uuid)) { > > + return 0; > > + } > > + > > + pos = pci_add_capability(d, PCI_CAP_ID_VNDR, offset, PCI_VENDOR_SIZEOF, > > + errp); > > + if (pos < 0) { > > + return pos; > > + } > > + > > + dc->vendor_id = PCI_VENDOR_ID_REDHAT; > > + dc->device_id = PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE; > > + pci_set_word(d->config + PCI_VENDOR_ID, PCI_VENDOR_ID_REDHAT); > > + pci_set_word(d->config + PCI_DEVICE_ID, PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE); > > + > > + pci_set_word(d->config + pos + PCI_VENDOR_CAP_LEN_OFFSET, > > + PCI_VENDOR_SIZEOF); > > + memcpy(d->config + offset + PCI_VENDOR_GROUP_ID_OFFSET, &d->uuid, > > + sizeof(QemuUUID)); > > + return pos; > > +} > > + > > /* Accessor function to get parent bridge device from pci bus. */ > > PCIDevice *pci_bridge_get_device(PCIBus *bus) > > { > > diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h > > index 990d6fcbde..ee234c5a6f 100644 > > --- a/include/hw/pci/pci.h > > +++ b/include/hw/pci/pci.h > > @@ -4,6 +4,7 @@ > > #include "hw/qdev.h" > > #include "exec/memory.h" > > #include "sysemu/dma.h" > > +#include "qemu/uuid.h" > > > > /* PCI includes legacy ISA access. */ > > #include "hw/isa/isa.h" > > @@ -343,6 +344,7 @@ struct PCIDevice { > > bool has_rom; > > MemoryRegion rom; > > uint32_t rom_bar; > > + QemuUUID uuid; > > > > /* INTx routing notifier */ > > PCIINTxRoutingNotifier intx_routing_notifier; > > diff --git a/include/hw/pci/pcie.h b/include/hw/pci/pcie.h > > index b71e369703..b4189d0ce3 100644 > > --- a/include/hw/pci/pcie.h > > +++ b/include/hw/pci/pcie.h > > @@ -82,6 +82,7 @@ struct PCIExpressDevice { > > }; > > > > #define COMPAT_PROP_PCP "power_controller_present" > > +#define COMPAT_PROP_UUID "uuid" > > > > /* PCI express capability helper functions */ > > int pcie_cap_init(PCIDevice *dev, uint8_t offset, uint8_t type, > > diff --git a/include/hw/pci/pcie_port.h b/include/hw/pci/pcie_port.h > > index 0736014bfd..40db6dbbe7 100644 > > --- a/include/hw/pci/pcie_port.h > > +++ b/include/hw/pci/pcie_port.h > > @@ -74,6 +74,7 @@ typedef struct PCIERootPortClass { > > int exp_offset; > > int aer_offset; > > int ssvid_offset; > > + int vendor_offset; > > int ssid; > > } PCIERootPortClass; > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org > For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org >
On Tue, Jun 19, 2018 at 01:14:06PM -0500, Venu Busireddy wrote: > On 2018-06-19 20:24:12 +0300, Michael S. Tsirkin wrote: > > On Tue, Jun 19, 2018 at 11:32:26AM -0500, Venu Busireddy wrote: > > > Add a "Vendor-Specific" capability to the PCIe bridge, to contain the > > > "Group Identifier" (UUID) that will be used to pair a virtio device with > > > the passthrough device attached to that bridge. > > > > > > This capability is added to the bridge iff the "uuid" option is specified > > > for the bridge device, via the qemu command line. Also, the bridge's > > > Device ID is changed to PCI_VENDOR_ID_REDHAT, and Vendor ID is changed > > > to PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE (from the default values), when the > > > "uuid" option is present. > > > > > > Signed-off-by: Venu Busireddy <venu.busireddy@oracle.com> > > > > I don't see why we should add it to all bridges. > > Let's just add it to ones that already have the RH vendor ID? > > No. I am not adding the capability to all bridges. > > In the earlier discussions, we agreed that the bridge be left as > Intel bridge if we do not intend to use it for storing the pairing > information. If we do intend to store the pairing information in the > bridge, we wanted to change the bridge's Vendor ID to RH Vendor ID to > avoid confusion. In other words, bridge's with RH Vendor ID come into > existence only when there is an intent to store the pairing information > in the bridge. > > Accordingly, if the "uuid" option is specified for the bridge, it > is assumed that the user intends to use the bridge for storing the > pairing information, and hence, the capability is added to the bridge, > and the Vendor ID is changed to RH Vendor ID. If the "uuid" option > is not specified, the bridge remains as Intel bridge, and without the > vendor-specific capability. > > Venu Yes but the way to do it is not to tweak the vendor and device ID, instead, just add the UUID property to bridges that already have the correct vendor and device id. > > > > > > > --- > > > hw/pci-bridge/ioh3420.c | 2 ++ > > > hw/pci-bridge/pcie_root_port.c | 7 +++++++ > > > hw/pci/pci_bridge.c | 32 ++++++++++++++++++++++++++++++++ > > > include/hw/pci/pci.h | 2 ++ > > > include/hw/pci/pcie.h | 1 + > > > include/hw/pci/pcie_port.h | 1 + > > > 6 files changed, 45 insertions(+) > > > > > > diff --git a/hw/pci-bridge/ioh3420.c b/hw/pci-bridge/ioh3420.c > > > index a451d74ee6..b6b9ebc726 100644 > > > --- a/hw/pci-bridge/ioh3420.c > > > +++ b/hw/pci-bridge/ioh3420.c > > > @@ -35,6 +35,7 @@ > > > #define IOH_EP_MSI_SUPPORTED_FLAGS PCI_MSI_FLAGS_MASKBIT > > > #define IOH_EP_MSI_NR_VECTOR 2 > > > #define IOH_EP_EXP_OFFSET 0x90 > > > +#define IOH_EP_VENDOR_OFFSET 0xCC > > > #define IOH_EP_AER_OFFSET 0x100 > > > > > > /* > > > @@ -111,6 +112,7 @@ static void ioh3420_class_init(ObjectClass *klass, void *data) > > > rpc->exp_offset = IOH_EP_EXP_OFFSET; > > > rpc->aer_offset = IOH_EP_AER_OFFSET; > > > rpc->ssvid_offset = IOH_EP_SSVID_OFFSET; > > > + rpc->vendor_offset = IOH_EP_VENDOR_OFFSET; > > > rpc->ssid = IOH_EP_SSVID_SSID; > > > } > > > > > > diff --git a/hw/pci-bridge/pcie_root_port.c b/hw/pci-bridge/pcie_root_port.c > > > index 45f9e8cd4a..ba470c7fda 100644 > > > --- a/hw/pci-bridge/pcie_root_port.c > > > +++ b/hw/pci-bridge/pcie_root_port.c > > > @@ -71,6 +71,12 @@ static void rp_realize(PCIDevice *d, Error **errp) > > > goto err_bridge; > > > } > > > > > > + rc = pci_bridge_vendor_init(d, rpc->vendor_offset, errp); > > > + if (rc < 0) { > > > + error_append_hint(errp, "Can't init group ID, error %d\n", rc); > > > + goto err_bridge; > > > + } > > > + > > > if (rpc->interrupts_init) { > > > rc = rpc->interrupts_init(d, errp); > > > if (rc < 0) { > > > @@ -137,6 +143,7 @@ static void rp_exit(PCIDevice *d) > > > static Property rp_props[] = { > > > DEFINE_PROP_BIT(COMPAT_PROP_PCP, PCIDevice, cap_present, > > > QEMU_PCIE_SLTCAP_PCP_BITNR, true), > > > + DEFINE_PROP_UUID(COMPAT_PROP_UUID, PCIDevice, uuid, false), > > > DEFINE_PROP_END_OF_LIST() > > > }; > > > > > > diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c > > > index 40a39f57cb..c63bc439f7 100644 > > > --- a/hw/pci/pci_bridge.c > > > +++ b/hw/pci/pci_bridge.c > > > @@ -34,12 +34,17 @@ > > > #include "hw/pci/pci_bus.h" > > > #include "qemu/range.h" > > > #include "qapi/error.h" > > > +#include "qemu/uuid.h" > > > > > > /* PCI bridge subsystem vendor ID helper functions */ > > > #define PCI_SSVID_SIZEOF 8 > > > #define PCI_SSVID_SVID 4 > > > #define PCI_SSVID_SSID 6 > > > > > > +#define PCI_VENDOR_SIZEOF 20 > > > +#define PCI_VENDOR_CAP_LEN_OFFSET 2 > > > +#define PCI_VENDOR_GROUP_ID_OFFSET 4 > > > + > > > int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset, > > > uint16_t svid, uint16_t ssid, > > > Error **errp) > > > @@ -57,6 +62,33 @@ int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset, > > > return pos; > > > } > > > > > > +int pci_bridge_vendor_init(PCIDevice *d, uint8_t offset, Error **errp) > > > +{ > > > + int pos; > > > + PCIDeviceClass *dc = PCI_DEVICE_GET_CLASS(d); > > > + > > > + if (qemu_uuid_is_null(&d->uuid)) { > > > + return 0; > > > + } > > > + > > > + pos = pci_add_capability(d, PCI_CAP_ID_VNDR, offset, PCI_VENDOR_SIZEOF, > > > + errp); > > > + if (pos < 0) { > > > + return pos; > > > + } > > > + > > > + dc->vendor_id = PCI_VENDOR_ID_REDHAT; > > > + dc->device_id = PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE; > > > + pci_set_word(d->config + PCI_VENDOR_ID, PCI_VENDOR_ID_REDHAT); > > > + pci_set_word(d->config + PCI_DEVICE_ID, PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE); > > > + > > > + pci_set_word(d->config + pos + PCI_VENDOR_CAP_LEN_OFFSET, > > > + PCI_VENDOR_SIZEOF); > > > + memcpy(d->config + offset + PCI_VENDOR_GROUP_ID_OFFSET, &d->uuid, > > > + sizeof(QemuUUID)); > > > + return pos; > > > +} > > > + > > > /* Accessor function to get parent bridge device from pci bus. */ > > > PCIDevice *pci_bridge_get_device(PCIBus *bus) > > > { > > > diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h > > > index 990d6fcbde..ee234c5a6f 100644 > > > --- a/include/hw/pci/pci.h > > > +++ b/include/hw/pci/pci.h > > > @@ -4,6 +4,7 @@ > > > #include "hw/qdev.h" > > > #include "exec/memory.h" > > > #include "sysemu/dma.h" > > > +#include "qemu/uuid.h" > > > > > > /* PCI includes legacy ISA access. */ > > > #include "hw/isa/isa.h" > > > @@ -343,6 +344,7 @@ struct PCIDevice { > > > bool has_rom; > > > MemoryRegion rom; > > > uint32_t rom_bar; > > > + QemuUUID uuid; > > > > > > /* INTx routing notifier */ > > > PCIINTxRoutingNotifier intx_routing_notifier; > > > diff --git a/include/hw/pci/pcie.h b/include/hw/pci/pcie.h > > > index b71e369703..b4189d0ce3 100644 > > > --- a/include/hw/pci/pcie.h > > > +++ b/include/hw/pci/pcie.h > > > @@ -82,6 +82,7 @@ struct PCIExpressDevice { > > > }; > > > > > > #define COMPAT_PROP_PCP "power_controller_present" > > > +#define COMPAT_PROP_UUID "uuid" > > > > > > /* PCI express capability helper functions */ > > > int pcie_cap_init(PCIDevice *dev, uint8_t offset, uint8_t type, > > > diff --git a/include/hw/pci/pcie_port.h b/include/hw/pci/pcie_port.h > > > index 0736014bfd..40db6dbbe7 100644 > > > --- a/include/hw/pci/pcie_port.h > > > +++ b/include/hw/pci/pcie_port.h > > > @@ -74,6 +74,7 @@ typedef struct PCIERootPortClass { > > > int exp_offset; > > > int aer_offset; > > > int ssvid_offset; > > > + int vendor_offset; > > > int ssid; > > > } PCIERootPortClass; > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org > > For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org > >
On 2018-06-19 21:21:23 +0300, Michael S. Tsirkin wrote: > On Tue, Jun 19, 2018 at 01:14:06PM -0500, Venu Busireddy wrote: > > On 2018-06-19 20:24:12 +0300, Michael S. Tsirkin wrote: > > > On Tue, Jun 19, 2018 at 11:32:26AM -0500, Venu Busireddy wrote: > > > > Add a "Vendor-Specific" capability to the PCIe bridge, to contain the > > > > "Group Identifier" (UUID) that will be used to pair a virtio device with > > > > the passthrough device attached to that bridge. > > > > > > > > This capability is added to the bridge iff the "uuid" option is specified > > > > for the bridge device, via the qemu command line. Also, the bridge's > > > > Device ID is changed to PCI_VENDOR_ID_REDHAT, and Vendor ID is changed > > > > to PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE (from the default values), when the > > > > "uuid" option is present. > > > > > > > > Signed-off-by: Venu Busireddy <venu.busireddy@oracle.com> > > > > > > I don't see why we should add it to all bridges. > > > Let's just add it to ones that already have the RH vendor ID? > > > > No. I am not adding the capability to all bridges. > > > > In the earlier discussions, we agreed that the bridge be left as > > Intel bridge if we do not intend to use it for storing the pairing > > information. If we do intend to store the pairing information in the > > bridge, we wanted to change the bridge's Vendor ID to RH Vendor ID to > > avoid confusion. In other words, bridge's with RH Vendor ID come into > > existence only when there is an intent to store the pairing information > > in the bridge. > > > > Accordingly, if the "uuid" option is specified for the bridge, it > > is assumed that the user intends to use the bridge for storing the > > pairing information, and hence, the capability is added to the bridge, > > and the Vendor ID is changed to RH Vendor ID. If the "uuid" option > > is not specified, the bridge remains as Intel bridge, and without the > > vendor-specific capability. > > > > Venu > > Yes but the way to do it is not to tweak the vendor and device ID, > instead, just add the UUID property to bridges that already have the > correct vendor and device id. I was using ioh3420 as the bridge device, because that is what is recommended here: https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/pcie.txt;hb=HEAD ioh3420 defaults to the Intel Vendor ID. Hence the tweak to change the Vendor ID to RH Vendor ID. Is there another bridge device other than ioh3420 that I should use? what device do you suggest? Thanks, Venu > > > > > > > > > > > > --- > > > > hw/pci-bridge/ioh3420.c | 2 ++ > > > > hw/pci-bridge/pcie_root_port.c | 7 +++++++ > > > > hw/pci/pci_bridge.c | 32 ++++++++++++++++++++++++++++++++ > > > > include/hw/pci/pci.h | 2 ++ > > > > include/hw/pci/pcie.h | 1 + > > > > include/hw/pci/pcie_port.h | 1 + > > > > 6 files changed, 45 insertions(+) > > > > > > > > diff --git a/hw/pci-bridge/ioh3420.c b/hw/pci-bridge/ioh3420.c > > > > index a451d74ee6..b6b9ebc726 100644 > > > > --- a/hw/pci-bridge/ioh3420.c > > > > +++ b/hw/pci-bridge/ioh3420.c > > > > @@ -35,6 +35,7 @@ > > > > #define IOH_EP_MSI_SUPPORTED_FLAGS PCI_MSI_FLAGS_MASKBIT > > > > #define IOH_EP_MSI_NR_VECTOR 2 > > > > #define IOH_EP_EXP_OFFSET 0x90 > > > > +#define IOH_EP_VENDOR_OFFSET 0xCC > > > > #define IOH_EP_AER_OFFSET 0x100 > > > > > > > > /* > > > > @@ -111,6 +112,7 @@ static void ioh3420_class_init(ObjectClass *klass, void *data) > > > > rpc->exp_offset = IOH_EP_EXP_OFFSET; > > > > rpc->aer_offset = IOH_EP_AER_OFFSET; > > > > rpc->ssvid_offset = IOH_EP_SSVID_OFFSET; > > > > + rpc->vendor_offset = IOH_EP_VENDOR_OFFSET; > > > > rpc->ssid = IOH_EP_SSVID_SSID; > > > > } > > > > > > > > diff --git a/hw/pci-bridge/pcie_root_port.c b/hw/pci-bridge/pcie_root_port.c > > > > index 45f9e8cd4a..ba470c7fda 100644 > > > > --- a/hw/pci-bridge/pcie_root_port.c > > > > +++ b/hw/pci-bridge/pcie_root_port.c > > > > @@ -71,6 +71,12 @@ static void rp_realize(PCIDevice *d, Error **errp) > > > > goto err_bridge; > > > > } > > > > > > > > + rc = pci_bridge_vendor_init(d, rpc->vendor_offset, errp); > > > > + if (rc < 0) { > > > > + error_append_hint(errp, "Can't init group ID, error %d\n", rc); > > > > + goto err_bridge; > > > > + } > > > > + > > > > if (rpc->interrupts_init) { > > > > rc = rpc->interrupts_init(d, errp); > > > > if (rc < 0) { > > > > @@ -137,6 +143,7 @@ static void rp_exit(PCIDevice *d) > > > > static Property rp_props[] = { > > > > DEFINE_PROP_BIT(COMPAT_PROP_PCP, PCIDevice, cap_present, > > > > QEMU_PCIE_SLTCAP_PCP_BITNR, true), > > > > + DEFINE_PROP_UUID(COMPAT_PROP_UUID, PCIDevice, uuid, false), > > > > DEFINE_PROP_END_OF_LIST() > > > > }; > > > > > > > > diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c > > > > index 40a39f57cb..c63bc439f7 100644 > > > > --- a/hw/pci/pci_bridge.c > > > > +++ b/hw/pci/pci_bridge.c > > > > @@ -34,12 +34,17 @@ > > > > #include "hw/pci/pci_bus.h" > > > > #include "qemu/range.h" > > > > #include "qapi/error.h" > > > > +#include "qemu/uuid.h" > > > > > > > > /* PCI bridge subsystem vendor ID helper functions */ > > > > #define PCI_SSVID_SIZEOF 8 > > > > #define PCI_SSVID_SVID 4 > > > > #define PCI_SSVID_SSID 6 > > > > > > > > +#define PCI_VENDOR_SIZEOF 20 > > > > +#define PCI_VENDOR_CAP_LEN_OFFSET 2 > > > > +#define PCI_VENDOR_GROUP_ID_OFFSET 4 > > > > + > > > > int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset, > > > > uint16_t svid, uint16_t ssid, > > > > Error **errp) > > > > @@ -57,6 +62,33 @@ int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset, > > > > return pos; > > > > } > > > > > > > > +int pci_bridge_vendor_init(PCIDevice *d, uint8_t offset, Error **errp) > > > > +{ > > > > + int pos; > > > > + PCIDeviceClass *dc = PCI_DEVICE_GET_CLASS(d); > > > > + > > > > + if (qemu_uuid_is_null(&d->uuid)) { > > > > + return 0; > > > > + } > > > > + > > > > + pos = pci_add_capability(d, PCI_CAP_ID_VNDR, offset, PCI_VENDOR_SIZEOF, > > > > + errp); > > > > + if (pos < 0) { > > > > + return pos; > > > > + } > > > > + > > > > + dc->vendor_id = PCI_VENDOR_ID_REDHAT; > > > > + dc->device_id = PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE; > > > > + pci_set_word(d->config + PCI_VENDOR_ID, PCI_VENDOR_ID_REDHAT); > > > > + pci_set_word(d->config + PCI_DEVICE_ID, PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE); > > > > + > > > > + pci_set_word(d->config + pos + PCI_VENDOR_CAP_LEN_OFFSET, > > > > + PCI_VENDOR_SIZEOF); > > > > + memcpy(d->config + offset + PCI_VENDOR_GROUP_ID_OFFSET, &d->uuid, > > > > + sizeof(QemuUUID)); > > > > + return pos; > > > > +} > > > > + > > > > /* Accessor function to get parent bridge device from pci bus. */ > > > > PCIDevice *pci_bridge_get_device(PCIBus *bus) > > > > { > > > > diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h > > > > index 990d6fcbde..ee234c5a6f 100644 > > > > --- a/include/hw/pci/pci.h > > > > +++ b/include/hw/pci/pci.h > > > > @@ -4,6 +4,7 @@ > > > > #include "hw/qdev.h" > > > > #include "exec/memory.h" > > > > #include "sysemu/dma.h" > > > > +#include "qemu/uuid.h" > > > > > > > > /* PCI includes legacy ISA access. */ > > > > #include "hw/isa/isa.h" > > > > @@ -343,6 +344,7 @@ struct PCIDevice { > > > > bool has_rom; > > > > MemoryRegion rom; > > > > uint32_t rom_bar; > > > > + QemuUUID uuid; > > > > > > > > /* INTx routing notifier */ > > > > PCIINTxRoutingNotifier intx_routing_notifier; > > > > diff --git a/include/hw/pci/pcie.h b/include/hw/pci/pcie.h > > > > index b71e369703..b4189d0ce3 100644 > > > > --- a/include/hw/pci/pcie.h > > > > +++ b/include/hw/pci/pcie.h > > > > @@ -82,6 +82,7 @@ struct PCIExpressDevice { > > > > }; > > > > > > > > #define COMPAT_PROP_PCP "power_controller_present" > > > > +#define COMPAT_PROP_UUID "uuid" > > > > > > > > /* PCI express capability helper functions */ > > > > int pcie_cap_init(PCIDevice *dev, uint8_t offset, uint8_t type, > > > > diff --git a/include/hw/pci/pcie_port.h b/include/hw/pci/pcie_port.h > > > > index 0736014bfd..40db6dbbe7 100644 > > > > --- a/include/hw/pci/pcie_port.h > > > > +++ b/include/hw/pci/pcie_port.h > > > > @@ -74,6 +74,7 @@ typedef struct PCIERootPortClass { > > > > int exp_offset; > > > > int aer_offset; > > > > int ssvid_offset; > > > > + int vendor_offset; > > > > int ssid; > > > > } PCIERootPortClass; > > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org > > > For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org > > >
On Tue, Jun 19, 2018 at 01:36:17PM -0500, Venu Busireddy wrote: > On 2018-06-19 21:21:23 +0300, Michael S. Tsirkin wrote: > > On Tue, Jun 19, 2018 at 01:14:06PM -0500, Venu Busireddy wrote: > > > On 2018-06-19 20:24:12 +0300, Michael S. Tsirkin wrote: > > > > On Tue, Jun 19, 2018 at 11:32:26AM -0500, Venu Busireddy wrote: > > > > > Add a "Vendor-Specific" capability to the PCIe bridge, to contain the > > > > > "Group Identifier" (UUID) that will be used to pair a virtio device with > > > > > the passthrough device attached to that bridge. > > > > > > > > > > This capability is added to the bridge iff the "uuid" option is specified > > > > > for the bridge device, via the qemu command line. Also, the bridge's > > > > > Device ID is changed to PCI_VENDOR_ID_REDHAT, and Vendor ID is changed > > > > > to PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE (from the default values), when the > > > > > "uuid" option is present. > > > > > > > > > > Signed-off-by: Venu Busireddy <venu.busireddy@oracle.com> > > > > > > > > I don't see why we should add it to all bridges. > > > > Let's just add it to ones that already have the RH vendor ID? > > > > > > No. I am not adding the capability to all bridges. > > > > > > In the earlier discussions, we agreed that the bridge be left as > > > Intel bridge if we do not intend to use it for storing the pairing > > > information. If we do intend to store the pairing information in the > > > bridge, we wanted to change the bridge's Vendor ID to RH Vendor ID to > > > avoid confusion. In other words, bridge's with RH Vendor ID come into > > > existence only when there is an intent to store the pairing information > > > in the bridge. > > > > > > Accordingly, if the "uuid" option is specified for the bridge, it > > > is assumed that the user intends to use the bridge for storing the > > > pairing information, and hence, the capability is added to the bridge, > > > and the Vendor ID is changed to RH Vendor ID. If the "uuid" option > > > is not specified, the bridge remains as Intel bridge, and without the > > > vendor-specific capability. > > > > > > Venu > > > > Yes but the way to do it is not to tweak the vendor and device ID, > > instead, just add the UUID property to bridges that already have the > > correct vendor and device id. > > I was using ioh3420 as the bridge device, because that is what is > recommended here: > > https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/pcie.txt;hb=HEAD > > ioh3420 defaults to the Intel Vendor ID. Hence the tweak to change the > Vendor ID to RH Vendor ID. > > Is there another bridge device other than ioh3420 that I should use? > what device do you suggest? > > Thanks, > > Venu For pci, use hw/pci-bridge/pci_bridge_dev.c Maybe allocate a special ID for grouping bridges. For express, add your own downstream port. > > > > > > > > > > > > > > > > > --- > > > > > hw/pci-bridge/ioh3420.c | 2 ++ > > > > > hw/pci-bridge/pcie_root_port.c | 7 +++++++ > > > > > hw/pci/pci_bridge.c | 32 ++++++++++++++++++++++++++++++++ > > > > > include/hw/pci/pci.h | 2 ++ > > > > > include/hw/pci/pcie.h | 1 + > > > > > include/hw/pci/pcie_port.h | 1 + > > > > > 6 files changed, 45 insertions(+) > > > > > > > > > > diff --git a/hw/pci-bridge/ioh3420.c b/hw/pci-bridge/ioh3420.c > > > > > index a451d74ee6..b6b9ebc726 100644 > > > > > --- a/hw/pci-bridge/ioh3420.c > > > > > +++ b/hw/pci-bridge/ioh3420.c > > > > > @@ -35,6 +35,7 @@ > > > > > #define IOH_EP_MSI_SUPPORTED_FLAGS PCI_MSI_FLAGS_MASKBIT > > > > > #define IOH_EP_MSI_NR_VECTOR 2 > > > > > #define IOH_EP_EXP_OFFSET 0x90 > > > > > +#define IOH_EP_VENDOR_OFFSET 0xCC > > > > > #define IOH_EP_AER_OFFSET 0x100 > > > > > > > > > > /* > > > > > @@ -111,6 +112,7 @@ static void ioh3420_class_init(ObjectClass *klass, void *data) > > > > > rpc->exp_offset = IOH_EP_EXP_OFFSET; > > > > > rpc->aer_offset = IOH_EP_AER_OFFSET; > > > > > rpc->ssvid_offset = IOH_EP_SSVID_OFFSET; > > > > > + rpc->vendor_offset = IOH_EP_VENDOR_OFFSET; > > > > > rpc->ssid = IOH_EP_SSVID_SSID; > > > > > } > > > > > > > > > > diff --git a/hw/pci-bridge/pcie_root_port.c b/hw/pci-bridge/pcie_root_port.c > > > > > index 45f9e8cd4a..ba470c7fda 100644 > > > > > --- a/hw/pci-bridge/pcie_root_port.c > > > > > +++ b/hw/pci-bridge/pcie_root_port.c > > > > > @@ -71,6 +71,12 @@ static void rp_realize(PCIDevice *d, Error **errp) > > > > > goto err_bridge; > > > > > } > > > > > > > > > > + rc = pci_bridge_vendor_init(d, rpc->vendor_offset, errp); > > > > > + if (rc < 0) { > > > > > + error_append_hint(errp, "Can't init group ID, error %d\n", rc); > > > > > + goto err_bridge; > > > > > + } > > > > > + > > > > > if (rpc->interrupts_init) { > > > > > rc = rpc->interrupts_init(d, errp); > > > > > if (rc < 0) { > > > > > @@ -137,6 +143,7 @@ static void rp_exit(PCIDevice *d) > > > > > static Property rp_props[] = { > > > > > DEFINE_PROP_BIT(COMPAT_PROP_PCP, PCIDevice, cap_present, > > > > > QEMU_PCIE_SLTCAP_PCP_BITNR, true), > > > > > + DEFINE_PROP_UUID(COMPAT_PROP_UUID, PCIDevice, uuid, false), > > > > > DEFINE_PROP_END_OF_LIST() > > > > > }; > > > > > > > > > > diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c > > > > > index 40a39f57cb..c63bc439f7 100644 > > > > > --- a/hw/pci/pci_bridge.c > > > > > +++ b/hw/pci/pci_bridge.c > > > > > @@ -34,12 +34,17 @@ > > > > > #include "hw/pci/pci_bus.h" > > > > > #include "qemu/range.h" > > > > > #include "qapi/error.h" > > > > > +#include "qemu/uuid.h" > > > > > > > > > > /* PCI bridge subsystem vendor ID helper functions */ > > > > > #define PCI_SSVID_SIZEOF 8 > > > > > #define PCI_SSVID_SVID 4 > > > > > #define PCI_SSVID_SSID 6 > > > > > > > > > > +#define PCI_VENDOR_SIZEOF 20 > > > > > +#define PCI_VENDOR_CAP_LEN_OFFSET 2 > > > > > +#define PCI_VENDOR_GROUP_ID_OFFSET 4 > > > > > + > > > > > int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset, > > > > > uint16_t svid, uint16_t ssid, > > > > > Error **errp) > > > > > @@ -57,6 +62,33 @@ int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset, > > > > > return pos; > > > > > } > > > > > > > > > > +int pci_bridge_vendor_init(PCIDevice *d, uint8_t offset, Error **errp) > > > > > +{ > > > > > + int pos; > > > > > + PCIDeviceClass *dc = PCI_DEVICE_GET_CLASS(d); > > > > > + > > > > > + if (qemu_uuid_is_null(&d->uuid)) { > > > > > + return 0; > > > > > + } > > > > > + > > > > > + pos = pci_add_capability(d, PCI_CAP_ID_VNDR, offset, PCI_VENDOR_SIZEOF, > > > > > + errp); > > > > > + if (pos < 0) { > > > > > + return pos; > > > > > + } > > > > > + > > > > > + dc->vendor_id = PCI_VENDOR_ID_REDHAT; > > > > > + dc->device_id = PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE; > > > > > + pci_set_word(d->config + PCI_VENDOR_ID, PCI_VENDOR_ID_REDHAT); > > > > > + pci_set_word(d->config + PCI_DEVICE_ID, PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE); > > > > > + > > > > > + pci_set_word(d->config + pos + PCI_VENDOR_CAP_LEN_OFFSET, > > > > > + PCI_VENDOR_SIZEOF); > > > > > + memcpy(d->config + offset + PCI_VENDOR_GROUP_ID_OFFSET, &d->uuid, > > > > > + sizeof(QemuUUID)); > > > > > + return pos; > > > > > +} > > > > > + > > > > > /* Accessor function to get parent bridge device from pci bus. */ > > > > > PCIDevice *pci_bridge_get_device(PCIBus *bus) > > > > > { > > > > > diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h > > > > > index 990d6fcbde..ee234c5a6f 100644 > > > > > --- a/include/hw/pci/pci.h > > > > > +++ b/include/hw/pci/pci.h > > > > > @@ -4,6 +4,7 @@ > > > > > #include "hw/qdev.h" > > > > > #include "exec/memory.h" > > > > > #include "sysemu/dma.h" > > > > > +#include "qemu/uuid.h" > > > > > > > > > > /* PCI includes legacy ISA access. */ > > > > > #include "hw/isa/isa.h" > > > > > @@ -343,6 +344,7 @@ struct PCIDevice { > > > > > bool has_rom; > > > > > MemoryRegion rom; > > > > > uint32_t rom_bar; > > > > > + QemuUUID uuid; > > > > > > > > > > /* INTx routing notifier */ > > > > > PCIINTxRoutingNotifier intx_routing_notifier; > > > > > diff --git a/include/hw/pci/pcie.h b/include/hw/pci/pcie.h > > > > > index b71e369703..b4189d0ce3 100644 > > > > > --- a/include/hw/pci/pcie.h > > > > > +++ b/include/hw/pci/pcie.h > > > > > @@ -82,6 +82,7 @@ struct PCIExpressDevice { > > > > > }; > > > > > > > > > > #define COMPAT_PROP_PCP "power_controller_present" > > > > > +#define COMPAT_PROP_UUID "uuid" > > > > > > > > > > /* PCI express capability helper functions */ > > > > > int pcie_cap_init(PCIDevice *dev, uint8_t offset, uint8_t type, > > > > > diff --git a/include/hw/pci/pcie_port.h b/include/hw/pci/pcie_port.h > > > > > index 0736014bfd..40db6dbbe7 100644 > > > > > --- a/include/hw/pci/pcie_port.h > > > > > +++ b/include/hw/pci/pcie_port.h > > > > > @@ -74,6 +74,7 @@ typedef struct PCIERootPortClass { > > > > > int exp_offset; > > > > > int aer_offset; > > > > > int ssvid_offset; > > > > > + int vendor_offset; > > > > > int ssid; > > > > > } PCIERootPortClass; > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org > > > > For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org > > > >
On 2018-06-19 21:53:01 +0300, Michael S. Tsirkin wrote: > On Tue, Jun 19, 2018 at 01:36:17PM -0500, Venu Busireddy wrote: > > On 2018-06-19 21:21:23 +0300, Michael S. Tsirkin wrote: > > > On Tue, Jun 19, 2018 at 01:14:06PM -0500, Venu Busireddy wrote: > > > > On 2018-06-19 20:24:12 +0300, Michael S. Tsirkin wrote: > > > > > On Tue, Jun 19, 2018 at 11:32:26AM -0500, Venu Busireddy wrote: > > > > > > Add a "Vendor-Specific" capability to the PCIe bridge, to contain the > > > > > > "Group Identifier" (UUID) that will be used to pair a virtio device with > > > > > > the passthrough device attached to that bridge. > > > > > > > > > > > > This capability is added to the bridge iff the "uuid" option is specified > > > > > > for the bridge device, via the qemu command line. Also, the bridge's > > > > > > Device ID is changed to PCI_VENDOR_ID_REDHAT, and Vendor ID is changed > > > > > > to PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE (from the default values), when the > > > > > > "uuid" option is present. > > > > > > > > > > > > Signed-off-by: Venu Busireddy <venu.busireddy@oracle.com> > > > > > > > > > > I don't see why we should add it to all bridges. > > > > > Let's just add it to ones that already have the RH vendor ID? > > > > > > > > No. I am not adding the capability to all bridges. > > > > > > > > In the earlier discussions, we agreed that the bridge be left as > > > > Intel bridge if we do not intend to use it for storing the pairing > > > > information. If we do intend to store the pairing information in the > > > > bridge, we wanted to change the bridge's Vendor ID to RH Vendor ID to > > > > avoid confusion. In other words, bridge's with RH Vendor ID come into > > > > existence only when there is an intent to store the pairing information > > > > in the bridge. > > > > > > > > Accordingly, if the "uuid" option is specified for the bridge, it > > > > is assumed that the user intends to use the bridge for storing the > > > > pairing information, and hence, the capability is added to the bridge, > > > > and the Vendor ID is changed to RH Vendor ID. If the "uuid" option > > > > is not specified, the bridge remains as Intel bridge, and without the > > > > vendor-specific capability. > > > > > > > > Venu > > > > > > Yes but the way to do it is not to tweak the vendor and device ID, > > > instead, just add the UUID property to bridges that already have the > > > correct vendor and device id. > > > > I was using ioh3420 as the bridge device, because that is what is > > recommended here: > > > > https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/pcie.txt;hb=HEAD > > > > ioh3420 defaults to the Intel Vendor ID. Hence the tweak to change the > > Vendor ID to RH Vendor ID. > > > > Is there another bridge device other than ioh3420 that I should use? > > what device do you suggest? > > > > Thanks, > > > > Venu > > For pci, use hw/pci-bridge/pci_bridge_dev.c > Maybe allocate a special ID for grouping bridges. > > For express, add your own downstream port. Specifically, on the command line, what device does the user specify? For example: qemu-system-x86_64 --device ${Bridge_Device},uuid="uuid string",<blah blah> What does the user specify for ${Bridge_Device} from the following: "i82801b11-bridge", bus PCI "ioh3420", bus PCI, desc "Intel IOH device id 3420 PCIE Root Port" "pci-bridge", bus PCI, desc "Standard PCI Bridge" "pci-bridge-seat", bus PCI, desc "Standard PCI Bridge (multiseat)" "pcie-pci-bridge", bus PCI "pcie-root-port", bus PCI, desc "PCI Express Root Port" "pxb", bus PCI, desc "PCI Expander Bridge" "pxb-pcie", bus PCI, desc "PCI Express Expander Bridge" "usb-host", bus usb-bus "usb-hub", bus usb-bus "vfio-pci-igd-lpc-bridge", bus PCI, desc "VFIO dummy ISA/LPC bridge for IGD assignment" "x3130-upstream", bus PCI, desc "TI X3130 Upstream Port of PCI Express Switch" "xio3130-downstream", bus PCI, desc "TI X3130 Downstream Port of PCI Express Switch" Or, are you suggesting that I add a new type of device? If latter, what should it be called? Thanks, > > > > > > > > > > > > > > > > > > > > > > > > --- > > > > > > hw/pci-bridge/ioh3420.c | 2 ++ > > > > > > hw/pci-bridge/pcie_root_port.c | 7 +++++++ > > > > > > hw/pci/pci_bridge.c | 32 ++++++++++++++++++++++++++++++++ > > > > > > include/hw/pci/pci.h | 2 ++ > > > > > > include/hw/pci/pcie.h | 1 + > > > > > > include/hw/pci/pcie_port.h | 1 + > > > > > > 6 files changed, 45 insertions(+) > > > > > > > > > > > > diff --git a/hw/pci-bridge/ioh3420.c b/hw/pci-bridge/ioh3420.c > > > > > > index a451d74ee6..b6b9ebc726 100644 > > > > > > --- a/hw/pci-bridge/ioh3420.c > > > > > > +++ b/hw/pci-bridge/ioh3420.c > > > > > > @@ -35,6 +35,7 @@ > > > > > > #define IOH_EP_MSI_SUPPORTED_FLAGS PCI_MSI_FLAGS_MASKBIT > > > > > > #define IOH_EP_MSI_NR_VECTOR 2 > > > > > > #define IOH_EP_EXP_OFFSET 0x90 > > > > > > +#define IOH_EP_VENDOR_OFFSET 0xCC > > > > > > #define IOH_EP_AER_OFFSET 0x100 > > > > > > > > > > > > /* > > > > > > @@ -111,6 +112,7 @@ static void ioh3420_class_init(ObjectClass *klass, void *data) > > > > > > rpc->exp_offset = IOH_EP_EXP_OFFSET; > > > > > > rpc->aer_offset = IOH_EP_AER_OFFSET; > > > > > > rpc->ssvid_offset = IOH_EP_SSVID_OFFSET; > > > > > > + rpc->vendor_offset = IOH_EP_VENDOR_OFFSET; > > > > > > rpc->ssid = IOH_EP_SSVID_SSID; > > > > > > } > > > > > > > > > > > > diff --git a/hw/pci-bridge/pcie_root_port.c b/hw/pci-bridge/pcie_root_port.c > > > > > > index 45f9e8cd4a..ba470c7fda 100644 > > > > > > --- a/hw/pci-bridge/pcie_root_port.c > > > > > > +++ b/hw/pci-bridge/pcie_root_port.c > > > > > > @@ -71,6 +71,12 @@ static void rp_realize(PCIDevice *d, Error **errp) > > > > > > goto err_bridge; > > > > > > } > > > > > > > > > > > > + rc = pci_bridge_vendor_init(d, rpc->vendor_offset, errp); > > > > > > + if (rc < 0) { > > > > > > + error_append_hint(errp, "Can't init group ID, error %d\n", rc); > > > > > > + goto err_bridge; > > > > > > + } > > > > > > + > > > > > > if (rpc->interrupts_init) { > > > > > > rc = rpc->interrupts_init(d, errp); > > > > > > if (rc < 0) { > > > > > > @@ -137,6 +143,7 @@ static void rp_exit(PCIDevice *d) > > > > > > static Property rp_props[] = { > > > > > > DEFINE_PROP_BIT(COMPAT_PROP_PCP, PCIDevice, cap_present, > > > > > > QEMU_PCIE_SLTCAP_PCP_BITNR, true), > > > > > > + DEFINE_PROP_UUID(COMPAT_PROP_UUID, PCIDevice, uuid, false), > > > > > > DEFINE_PROP_END_OF_LIST() > > > > > > }; > > > > > > > > > > > > diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c > > > > > > index 40a39f57cb..c63bc439f7 100644 > > > > > > --- a/hw/pci/pci_bridge.c > > > > > > +++ b/hw/pci/pci_bridge.c > > > > > > @@ -34,12 +34,17 @@ > > > > > > #include "hw/pci/pci_bus.h" > > > > > > #include "qemu/range.h" > > > > > > #include "qapi/error.h" > > > > > > +#include "qemu/uuid.h" > > > > > > > > > > > > /* PCI bridge subsystem vendor ID helper functions */ > > > > > > #define PCI_SSVID_SIZEOF 8 > > > > > > #define PCI_SSVID_SVID 4 > > > > > > #define PCI_SSVID_SSID 6 > > > > > > > > > > > > +#define PCI_VENDOR_SIZEOF 20 > > > > > > +#define PCI_VENDOR_CAP_LEN_OFFSET 2 > > > > > > +#define PCI_VENDOR_GROUP_ID_OFFSET 4 > > > > > > + > > > > > > int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset, > > > > > > uint16_t svid, uint16_t ssid, > > > > > > Error **errp) > > > > > > @@ -57,6 +62,33 @@ int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset, > > > > > > return pos; > > > > > > } > > > > > > > > > > > > +int pci_bridge_vendor_init(PCIDevice *d, uint8_t offset, Error **errp) > > > > > > +{ > > > > > > + int pos; > > > > > > + PCIDeviceClass *dc = PCI_DEVICE_GET_CLASS(d); > > > > > > + > > > > > > + if (qemu_uuid_is_null(&d->uuid)) { > > > > > > + return 0; > > > > > > + } > > > > > > + > > > > > > + pos = pci_add_capability(d, PCI_CAP_ID_VNDR, offset, PCI_VENDOR_SIZEOF, > > > > > > + errp); > > > > > > + if (pos < 0) { > > > > > > + return pos; > > > > > > + } > > > > > > + > > > > > > + dc->vendor_id = PCI_VENDOR_ID_REDHAT; > > > > > > + dc->device_id = PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE; > > > > > > + pci_set_word(d->config + PCI_VENDOR_ID, PCI_VENDOR_ID_REDHAT); > > > > > > + pci_set_word(d->config + PCI_DEVICE_ID, PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE); > > > > > > + > > > > > > + pci_set_word(d->config + pos + PCI_VENDOR_CAP_LEN_OFFSET, > > > > > > + PCI_VENDOR_SIZEOF); > > > > > > + memcpy(d->config + offset + PCI_VENDOR_GROUP_ID_OFFSET, &d->uuid, > > > > > > + sizeof(QemuUUID)); > > > > > > + return pos; > > > > > > +} > > > > > > + > > > > > > /* Accessor function to get parent bridge device from pci bus. */ > > > > > > PCIDevice *pci_bridge_get_device(PCIBus *bus) > > > > > > { > > > > > > diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h > > > > > > index 990d6fcbde..ee234c5a6f 100644 > > > > > > --- a/include/hw/pci/pci.h > > > > > > +++ b/include/hw/pci/pci.h > > > > > > @@ -4,6 +4,7 @@ > > > > > > #include "hw/qdev.h" > > > > > > #include "exec/memory.h" > > > > > > #include "sysemu/dma.h" > > > > > > +#include "qemu/uuid.h" > > > > > > > > > > > > /* PCI includes legacy ISA access. */ > > > > > > #include "hw/isa/isa.h" > > > > > > @@ -343,6 +344,7 @@ struct PCIDevice { > > > > > > bool has_rom; > > > > > > MemoryRegion rom; > > > > > > uint32_t rom_bar; > > > > > > + QemuUUID uuid; > > > > > > > > > > > > /* INTx routing notifier */ > > > > > > PCIINTxRoutingNotifier intx_routing_notifier; > > > > > > diff --git a/include/hw/pci/pcie.h b/include/hw/pci/pcie.h > > > > > > index b71e369703..b4189d0ce3 100644 > > > > > > --- a/include/hw/pci/pcie.h > > > > > > +++ b/include/hw/pci/pcie.h > > > > > > @@ -82,6 +82,7 @@ struct PCIExpressDevice { > > > > > > }; > > > > > > > > > > > > #define COMPAT_PROP_PCP "power_controller_present" > > > > > > +#define COMPAT_PROP_UUID "uuid" > > > > > > > > > > > > /* PCI express capability helper functions */ > > > > > > int pcie_cap_init(PCIDevice *dev, uint8_t offset, uint8_t type, > > > > > > diff --git a/include/hw/pci/pcie_port.h b/include/hw/pci/pcie_port.h > > > > > > index 0736014bfd..40db6dbbe7 100644 > > > > > > --- a/include/hw/pci/pcie_port.h > > > > > > +++ b/include/hw/pci/pcie_port.h > > > > > > @@ -74,6 +74,7 @@ typedef struct PCIERootPortClass { > > > > > > int exp_offset; > > > > > > int aer_offset; > > > > > > int ssvid_offset; > > > > > > + int vendor_offset; > > > > > > int ssid; > > > > > > } PCIERootPortClass; > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org > > > > > For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org > > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org > For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org >
On Tue, Jun 19, 2018 at 02:02:10PM -0500, Venu Busireddy wrote: > On 2018-06-19 21:53:01 +0300, Michael S. Tsirkin wrote: > > On Tue, Jun 19, 2018 at 01:36:17PM -0500, Venu Busireddy wrote: > > > On 2018-06-19 21:21:23 +0300, Michael S. Tsirkin wrote: > > > > On Tue, Jun 19, 2018 at 01:14:06PM -0500, Venu Busireddy wrote: > > > > > On 2018-06-19 20:24:12 +0300, Michael S. Tsirkin wrote: > > > > > > On Tue, Jun 19, 2018 at 11:32:26AM -0500, Venu Busireddy wrote: > > > > > > > Add a "Vendor-Specific" capability to the PCIe bridge, to contain the > > > > > > > "Group Identifier" (UUID) that will be used to pair a virtio device with > > > > > > > the passthrough device attached to that bridge. > > > > > > > > > > > > > > This capability is added to the bridge iff the "uuid" option is specified > > > > > > > for the bridge device, via the qemu command line. Also, the bridge's > > > > > > > Device ID is changed to PCI_VENDOR_ID_REDHAT, and Vendor ID is changed > > > > > > > to PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE (from the default values), when the > > > > > > > "uuid" option is present. > > > > > > > > > > > > > > Signed-off-by: Venu Busireddy <venu.busireddy@oracle.com> > > > > > > > > > > > > I don't see why we should add it to all bridges. > > > > > > Let's just add it to ones that already have the RH vendor ID? > > > > > > > > > > No. I am not adding the capability to all bridges. > > > > > > > > > > In the earlier discussions, we agreed that the bridge be left as > > > > > Intel bridge if we do not intend to use it for storing the pairing > > > > > information. If we do intend to store the pairing information in the > > > > > bridge, we wanted to change the bridge's Vendor ID to RH Vendor ID to > > > > > avoid confusion. In other words, bridge's with RH Vendor ID come into > > > > > existence only when there is an intent to store the pairing information > > > > > in the bridge. > > > > > > > > > > Accordingly, if the "uuid" option is specified for the bridge, it > > > > > is assumed that the user intends to use the bridge for storing the > > > > > pairing information, and hence, the capability is added to the bridge, > > > > > and the Vendor ID is changed to RH Vendor ID. If the "uuid" option > > > > > is not specified, the bridge remains as Intel bridge, and without the > > > > > vendor-specific capability. > > > > > > > > > > Venu > > > > > > > > Yes but the way to do it is not to tweak the vendor and device ID, > > > > instead, just add the UUID property to bridges that already have the > > > > correct vendor and device id. > > > > > > I was using ioh3420 as the bridge device, because that is what is > > > recommended here: > > > > > > https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/pcie.txt;hb=HEAD > > > > > > ioh3420 defaults to the Intel Vendor ID. Hence the tweak to change the > > > Vendor ID to RH Vendor ID. > > > > > > Is there another bridge device other than ioh3420 that I should use? > > > what device do you suggest? > > > > > > Thanks, > > > > > > Venu > > > > For pci, use hw/pci-bridge/pci_bridge_dev.c > > Maybe allocate a special ID for grouping bridges. > > > > For express, add your own downstream port. > > Specifically, on the command line, what device does the user specify? > For example: > > qemu-system-x86_64 --device ${Bridge_Device},uuid="uuid string",<blah blah> > > What does the user specify for ${Bridge_Device} from the following: > > "i82801b11-bridge", bus PCI > "ioh3420", bus PCI, desc "Intel IOH device id 3420 PCIE Root Port" > "pci-bridge", bus PCI, desc "Standard PCI Bridge" This one. Or add pci-bridge-group. > "pci-bridge-seat", bus PCI, desc "Standard PCI Bridge (multiseat)" > "pcie-pci-bridge", bus PCI > "pcie-root-port", bus PCI, desc "PCI Express Root Port" > "pxb", bus PCI, desc "PCI Expander Bridge" > "pxb-pcie", bus PCI, desc "PCI Express Expander Bridge" > "usb-host", bus usb-bus > "usb-hub", bus usb-bus > "vfio-pci-igd-lpc-bridge", bus PCI, desc "VFIO dummy ISA/LPC bridge for IGD assignment" > "x3130-upstream", bus PCI, desc "TI X3130 Upstream Port of PCI Express Switch" > "xio3130-downstream", bus PCI, desc "TI X3130 Downstream Port of PCI Express Switch" > > Or, are you suggesting that I add a new type of device? If latter, what > should it be called? > > Thanks, > For express, add pcie-downstream or pcie-downstream-group. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --- > > > > > > > hw/pci-bridge/ioh3420.c | 2 ++ > > > > > > > hw/pci-bridge/pcie_root_port.c | 7 +++++++ > > > > > > > hw/pci/pci_bridge.c | 32 ++++++++++++++++++++++++++++++++ > > > > > > > include/hw/pci/pci.h | 2 ++ > > > > > > > include/hw/pci/pcie.h | 1 + > > > > > > > include/hw/pci/pcie_port.h | 1 + > > > > > > > 6 files changed, 45 insertions(+) > > > > > > > > > > > > > > diff --git a/hw/pci-bridge/ioh3420.c b/hw/pci-bridge/ioh3420.c > > > > > > > index a451d74ee6..b6b9ebc726 100644 > > > > > > > --- a/hw/pci-bridge/ioh3420.c > > > > > > > +++ b/hw/pci-bridge/ioh3420.c > > > > > > > @@ -35,6 +35,7 @@ > > > > > > > #define IOH_EP_MSI_SUPPORTED_FLAGS PCI_MSI_FLAGS_MASKBIT > > > > > > > #define IOH_EP_MSI_NR_VECTOR 2 > > > > > > > #define IOH_EP_EXP_OFFSET 0x90 > > > > > > > +#define IOH_EP_VENDOR_OFFSET 0xCC > > > > > > > #define IOH_EP_AER_OFFSET 0x100 > > > > > > > > > > > > > > /* > > > > > > > @@ -111,6 +112,7 @@ static void ioh3420_class_init(ObjectClass *klass, void *data) > > > > > > > rpc->exp_offset = IOH_EP_EXP_OFFSET; > > > > > > > rpc->aer_offset = IOH_EP_AER_OFFSET; > > > > > > > rpc->ssvid_offset = IOH_EP_SSVID_OFFSET; > > > > > > > + rpc->vendor_offset = IOH_EP_VENDOR_OFFSET; > > > > > > > rpc->ssid = IOH_EP_SSVID_SSID; > > > > > > > } > > > > > > > > > > > > > > diff --git a/hw/pci-bridge/pcie_root_port.c b/hw/pci-bridge/pcie_root_port.c > > > > > > > index 45f9e8cd4a..ba470c7fda 100644 > > > > > > > --- a/hw/pci-bridge/pcie_root_port.c > > > > > > > +++ b/hw/pci-bridge/pcie_root_port.c > > > > > > > @@ -71,6 +71,12 @@ static void rp_realize(PCIDevice *d, Error **errp) > > > > > > > goto err_bridge; > > > > > > > } > > > > > > > > > > > > > > + rc = pci_bridge_vendor_init(d, rpc->vendor_offset, errp); > > > > > > > + if (rc < 0) { > > > > > > > + error_append_hint(errp, "Can't init group ID, error %d\n", rc); > > > > > > > + goto err_bridge; > > > > > > > + } > > > > > > > + > > > > > > > if (rpc->interrupts_init) { > > > > > > > rc = rpc->interrupts_init(d, errp); > > > > > > > if (rc < 0) { > > > > > > > @@ -137,6 +143,7 @@ static void rp_exit(PCIDevice *d) > > > > > > > static Property rp_props[] = { > > > > > > > DEFINE_PROP_BIT(COMPAT_PROP_PCP, PCIDevice, cap_present, > > > > > > > QEMU_PCIE_SLTCAP_PCP_BITNR, true), > > > > > > > + DEFINE_PROP_UUID(COMPAT_PROP_UUID, PCIDevice, uuid, false), > > > > > > > DEFINE_PROP_END_OF_LIST() > > > > > > > }; > > > > > > > > > > > > > > diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c > > > > > > > index 40a39f57cb..c63bc439f7 100644 > > > > > > > --- a/hw/pci/pci_bridge.c > > > > > > > +++ b/hw/pci/pci_bridge.c > > > > > > > @@ -34,12 +34,17 @@ > > > > > > > #include "hw/pci/pci_bus.h" > > > > > > > #include "qemu/range.h" > > > > > > > #include "qapi/error.h" > > > > > > > +#include "qemu/uuid.h" > > > > > > > > > > > > > > /* PCI bridge subsystem vendor ID helper functions */ > > > > > > > #define PCI_SSVID_SIZEOF 8 > > > > > > > #define PCI_SSVID_SVID 4 > > > > > > > #define PCI_SSVID_SSID 6 > > > > > > > > > > > > > > +#define PCI_VENDOR_SIZEOF 20 > > > > > > > +#define PCI_VENDOR_CAP_LEN_OFFSET 2 > > > > > > > +#define PCI_VENDOR_GROUP_ID_OFFSET 4 > > > > > > > + > > > > > > > int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset, > > > > > > > uint16_t svid, uint16_t ssid, > > > > > > > Error **errp) > > > > > > > @@ -57,6 +62,33 @@ int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset, > > > > > > > return pos; > > > > > > > } > > > > > > > > > > > > > > +int pci_bridge_vendor_init(PCIDevice *d, uint8_t offset, Error **errp) > > > > > > > +{ > > > > > > > + int pos; > > > > > > > + PCIDeviceClass *dc = PCI_DEVICE_GET_CLASS(d); > > > > > > > + > > > > > > > + if (qemu_uuid_is_null(&d->uuid)) { > > > > > > > + return 0; > > > > > > > + } > > > > > > > + > > > > > > > + pos = pci_add_capability(d, PCI_CAP_ID_VNDR, offset, PCI_VENDOR_SIZEOF, > > > > > > > + errp); > > > > > > > + if (pos < 0) { > > > > > > > + return pos; > > > > > > > + } > > > > > > > + > > > > > > > + dc->vendor_id = PCI_VENDOR_ID_REDHAT; > > > > > > > + dc->device_id = PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE; > > > > > > > + pci_set_word(d->config + PCI_VENDOR_ID, PCI_VENDOR_ID_REDHAT); > > > > > > > + pci_set_word(d->config + PCI_DEVICE_ID, PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE); > > > > > > > + > > > > > > > + pci_set_word(d->config + pos + PCI_VENDOR_CAP_LEN_OFFSET, > > > > > > > + PCI_VENDOR_SIZEOF); > > > > > > > + memcpy(d->config + offset + PCI_VENDOR_GROUP_ID_OFFSET, &d->uuid, > > > > > > > + sizeof(QemuUUID)); > > > > > > > + return pos; > > > > > > > +} > > > > > > > + > > > > > > > /* Accessor function to get parent bridge device from pci bus. */ > > > > > > > PCIDevice *pci_bridge_get_device(PCIBus *bus) > > > > > > > { > > > > > > > diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h > > > > > > > index 990d6fcbde..ee234c5a6f 100644 > > > > > > > --- a/include/hw/pci/pci.h > > > > > > > +++ b/include/hw/pci/pci.h > > > > > > > @@ -4,6 +4,7 @@ > > > > > > > #include "hw/qdev.h" > > > > > > > #include "exec/memory.h" > > > > > > > #include "sysemu/dma.h" > > > > > > > +#include "qemu/uuid.h" > > > > > > > > > > > > > > /* PCI includes legacy ISA access. */ > > > > > > > #include "hw/isa/isa.h" > > > > > > > @@ -343,6 +344,7 @@ struct PCIDevice { > > > > > > > bool has_rom; > > > > > > > MemoryRegion rom; > > > > > > > uint32_t rom_bar; > > > > > > > + QemuUUID uuid; > > > > > > > > > > > > > > /* INTx routing notifier */ > > > > > > > PCIINTxRoutingNotifier intx_routing_notifier; > > > > > > > diff --git a/include/hw/pci/pcie.h b/include/hw/pci/pcie.h > > > > > > > index b71e369703..b4189d0ce3 100644 > > > > > > > --- a/include/hw/pci/pcie.h > > > > > > > +++ b/include/hw/pci/pcie.h > > > > > > > @@ -82,6 +82,7 @@ struct PCIExpressDevice { > > > > > > > }; > > > > > > > > > > > > > > #define COMPAT_PROP_PCP "power_controller_present" > > > > > > > +#define COMPAT_PROP_UUID "uuid" > > > > > > > > > > > > > > /* PCI express capability helper functions */ > > > > > > > int pcie_cap_init(PCIDevice *dev, uint8_t offset, uint8_t type, > > > > > > > diff --git a/include/hw/pci/pcie_port.h b/include/hw/pci/pcie_port.h > > > > > > > index 0736014bfd..40db6dbbe7 100644 > > > > > > > --- a/include/hw/pci/pcie_port.h > > > > > > > +++ b/include/hw/pci/pcie_port.h > > > > > > > @@ -74,6 +74,7 @@ typedef struct PCIERootPortClass { > > > > > > > int exp_offset; > > > > > > > int aer_offset; > > > > > > > int ssvid_offset; > > > > > > > + int vendor_offset; > > > > > > > int ssid; > > > > > > > } PCIERootPortClass; > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org > > > > > > For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org > > > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org > > For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org > >
diff --git a/hw/pci-bridge/ioh3420.c b/hw/pci-bridge/ioh3420.c index a451d74ee6..b6b9ebc726 100644 --- a/hw/pci-bridge/ioh3420.c +++ b/hw/pci-bridge/ioh3420.c @@ -35,6 +35,7 @@ #define IOH_EP_MSI_SUPPORTED_FLAGS PCI_MSI_FLAGS_MASKBIT #define IOH_EP_MSI_NR_VECTOR 2 #define IOH_EP_EXP_OFFSET 0x90 +#define IOH_EP_VENDOR_OFFSET 0xCC #define IOH_EP_AER_OFFSET 0x100 /* @@ -111,6 +112,7 @@ static void ioh3420_class_init(ObjectClass *klass, void *data) rpc->exp_offset = IOH_EP_EXP_OFFSET; rpc->aer_offset = IOH_EP_AER_OFFSET; rpc->ssvid_offset = IOH_EP_SSVID_OFFSET; + rpc->vendor_offset = IOH_EP_VENDOR_OFFSET; rpc->ssid = IOH_EP_SSVID_SSID; } diff --git a/hw/pci-bridge/pcie_root_port.c b/hw/pci-bridge/pcie_root_port.c index 45f9e8cd4a..ba470c7fda 100644 --- a/hw/pci-bridge/pcie_root_port.c +++ b/hw/pci-bridge/pcie_root_port.c @@ -71,6 +71,12 @@ static void rp_realize(PCIDevice *d, Error **errp) goto err_bridge; } + rc = pci_bridge_vendor_init(d, rpc->vendor_offset, errp); + if (rc < 0) { + error_append_hint(errp, "Can't init group ID, error %d\n", rc); + goto err_bridge; + } + if (rpc->interrupts_init) { rc = rpc->interrupts_init(d, errp); if (rc < 0) { @@ -137,6 +143,7 @@ static void rp_exit(PCIDevice *d) static Property rp_props[] = { DEFINE_PROP_BIT(COMPAT_PROP_PCP, PCIDevice, cap_present, QEMU_PCIE_SLTCAP_PCP_BITNR, true), + DEFINE_PROP_UUID(COMPAT_PROP_UUID, PCIDevice, uuid, false), DEFINE_PROP_END_OF_LIST() }; diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c index 40a39f57cb..c63bc439f7 100644 --- a/hw/pci/pci_bridge.c +++ b/hw/pci/pci_bridge.c @@ -34,12 +34,17 @@ #include "hw/pci/pci_bus.h" #include "qemu/range.h" #include "qapi/error.h" +#include "qemu/uuid.h" /* PCI bridge subsystem vendor ID helper functions */ #define PCI_SSVID_SIZEOF 8 #define PCI_SSVID_SVID 4 #define PCI_SSVID_SSID 6 +#define PCI_VENDOR_SIZEOF 20 +#define PCI_VENDOR_CAP_LEN_OFFSET 2 +#define PCI_VENDOR_GROUP_ID_OFFSET 4 + int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset, uint16_t svid, uint16_t ssid, Error **errp) @@ -57,6 +62,33 @@ int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset, return pos; } +int pci_bridge_vendor_init(PCIDevice *d, uint8_t offset, Error **errp) +{ + int pos; + PCIDeviceClass *dc = PCI_DEVICE_GET_CLASS(d); + + if (qemu_uuid_is_null(&d->uuid)) { + return 0; + } + + pos = pci_add_capability(d, PCI_CAP_ID_VNDR, offset, PCI_VENDOR_SIZEOF, + errp); + if (pos < 0) { + return pos; + } + + dc->vendor_id = PCI_VENDOR_ID_REDHAT; + dc->device_id = PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE; + pci_set_word(d->config + PCI_VENDOR_ID, PCI_VENDOR_ID_REDHAT); + pci_set_word(d->config + PCI_DEVICE_ID, PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE); + + pci_set_word(d->config + pos + PCI_VENDOR_CAP_LEN_OFFSET, + PCI_VENDOR_SIZEOF); + memcpy(d->config + offset + PCI_VENDOR_GROUP_ID_OFFSET, &d->uuid, + sizeof(QemuUUID)); + return pos; +} + /* Accessor function to get parent bridge device from pci bus. */ PCIDevice *pci_bridge_get_device(PCIBus *bus) { diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h index 990d6fcbde..ee234c5a6f 100644 --- a/include/hw/pci/pci.h +++ b/include/hw/pci/pci.h @@ -4,6 +4,7 @@ #include "hw/qdev.h" #include "exec/memory.h" #include "sysemu/dma.h" +#include "qemu/uuid.h" /* PCI includes legacy ISA access. */ #include "hw/isa/isa.h" @@ -343,6 +344,7 @@ struct PCIDevice { bool has_rom; MemoryRegion rom; uint32_t rom_bar; + QemuUUID uuid; /* INTx routing notifier */ PCIINTxRoutingNotifier intx_routing_notifier; diff --git a/include/hw/pci/pcie.h b/include/hw/pci/pcie.h index b71e369703..b4189d0ce3 100644 --- a/include/hw/pci/pcie.h +++ b/include/hw/pci/pcie.h @@ -82,6 +82,7 @@ struct PCIExpressDevice { }; #define COMPAT_PROP_PCP "power_controller_present" +#define COMPAT_PROP_UUID "uuid" /* PCI express capability helper functions */ int pcie_cap_init(PCIDevice *dev, uint8_t offset, uint8_t type, diff --git a/include/hw/pci/pcie_port.h b/include/hw/pci/pcie_port.h index 0736014bfd..40db6dbbe7 100644 --- a/include/hw/pci/pcie_port.h +++ b/include/hw/pci/pcie_port.h @@ -74,6 +74,7 @@ typedef struct PCIERootPortClass { int exp_offset; int aer_offset; int ssvid_offset; + int vendor_offset; int ssid; } PCIERootPortClass;
Add a "Vendor-Specific" capability to the PCIe bridge, to contain the "Group Identifier" (UUID) that will be used to pair a virtio device with the passthrough device attached to that bridge. This capability is added to the bridge iff the "uuid" option is specified for the bridge device, via the qemu command line. Also, the bridge's Device ID is changed to PCI_VENDOR_ID_REDHAT, and Vendor ID is changed to PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE (from the default values), when the "uuid" option is present. Signed-off-by: Venu Busireddy <venu.busireddy@oracle.com> --- hw/pci-bridge/ioh3420.c | 2 ++ hw/pci-bridge/pcie_root_port.c | 7 +++++++ hw/pci/pci_bridge.c | 32 ++++++++++++++++++++++++++++++++ include/hw/pci/pci.h | 2 ++ include/hw/pci/pcie.h | 1 + include/hw/pci/pcie_port.h | 1 + 6 files changed, 45 insertions(+)