| Message ID | 3bcbc5d2c4dd644f81e3ab35a836c7648bfd0454.1529607879.git.vilhelm.gray@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, 21 Jun 2018 17:08:20 -0400 William Breathitt Gray <vilhelm.gray@gmail.com> wrote: > From: Benjamin Gaignard <benjamin.gaignard@st.com> > > Implement counter part of the STM32 timer hardware block by using > counter API. Hardware only supports X2 and X4 quadrature modes. A > ceiling value can be set to define the maximum value reachable by the > counter. > > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> > Co-authored-by: Fabrice Gasnier <fabrice.gasnier@st.com> > Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > --- > drivers/counter/Kconfig | 10 + > drivers/counter/Makefile | 1 + > drivers/counter/stm32-timer-cnt.c | 390 ++++++++++++++++++++++++++++++ > 3 files changed, 401 insertions(+) > create mode 100644 drivers/counter/stm32-timer-cnt.c > > diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig > index 7646f5df76f3..fcfbaa935122 100644 > --- a/drivers/counter/Kconfig > +++ b/drivers/counter/Kconfig > @@ -36,4 +36,14 @@ config 104_QUAD_8 > The base port addresses for the devices may be configured via the base > array module parameter. > > +config STM32_TIMER_CNT > + tristate "STM32 Timer encoder counter driver" > + depends on MFD_STM32_TIMERS || COMPILE_TEST > + help > + Select this option to enable STM32 Timer quadrature encoder > + and counter driver. > + > + To compile this driver as a module, choose M here: the > + module will be called stm32-timer-cnt. > + > endif # COUNTER > diff --git a/drivers/counter/Makefile b/drivers/counter/Makefile > index 23a4f6263e45..ff024259fb46 100644 > --- a/drivers/counter/Makefile > +++ b/drivers/counter/Makefile > @@ -8,3 +8,4 @@ obj-$(CONFIG_COUNTER) += counter.o > counter-y := generic-counter.o > > obj-$(CONFIG_104_QUAD_8) += 104-quad-8.o > +obj-$(CONFIG_STM32_TIMER_CNT) += stm32-timer-cnt.o > diff --git a/drivers/counter/stm32-timer-cnt.c b/drivers/counter/stm32-timer-cnt.c > new file mode 100644 > index 000000000000..0b15e729798b > --- /dev/null > +++ b/drivers/counter/stm32-timer-cnt.c > @@ -0,0 +1,390 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * STM32 Timer Encoder and Counter driver > + * > + * Copyright (C) STMicroelectronics 2018 > + * > + * Author: Benjamin Gaignard <benjamin.gaignard@st.com> > + * If I was being really really fussy - this blank line doesn't add anything ;) > + */ > +#include <linux/counter.h> > +#include <linux/iio/iio.h> > +#include <linux/iio/types.h> > +#include <linux/mfd/stm32-timers.h> > +#include <linux/module.h> > +#include <linux/platform_device.h> > + > +#define TIM_CCMR_CCXS (BIT(8) | BIT(0)) > +#define TIM_CCMR_MASK (TIM_CCMR_CC1S | TIM_CCMR_CC2S | \ > + TIM_CCMR_IC1F | TIM_CCMR_IC2F) > +#define TIM_CCER_MASK (TIM_CCER_CC1P | TIM_CCER_CC1NP | \ > + TIM_CCER_CC2P | TIM_CCER_CC2NP) > + > +struct stm32_timer_cnt { > + struct counter_device counter; > + struct regmap *regmap; > + struct clk *clk; > + u32 ceiling; > +}; > + > +/** > + * stm32_count_function - enumerates stm32 timer counter encoder modes > + * @STM32_COUNT_SLAVE_MODE_DISABLED: counts on internal clock when CEN=1 > + * @STM32_COUNT_ENCODER_MODE_1: counts TI1FP1 edges, depending on TI2FP2 level > + * @STM32_COUNT_ENCODER_MODE_2: counts TI2FP2 edges, depending on TI1FP1 level > + * @STM32_COUNT_ENCODER_MODE_3: counts on both TI1FP1 and TI2FP2 edges > + */ > +enum stm32_count_function { > + STM32_COUNT_SLAVE_MODE_DISABLED = -1, > + STM32_COUNT_ENCODER_MODE_1, > + STM32_COUNT_ENCODER_MODE_2, > + STM32_COUNT_ENCODER_MODE_3, > +}; > + > +static enum count_function stm32_count_functions[] = { > + [STM32_COUNT_ENCODER_MODE_1] = COUNT_FUNCTION_QUADRATURE_X2_A, > + [STM32_COUNT_ENCODER_MODE_2] = COUNT_FUNCTION_QUADRATURE_X2_B, > + [STM32_COUNT_ENCODER_MODE_3] = COUNT_FUNCTION_QUADRATURE_X4, > +}; > + > +static int stm32_count_read(struct counter_device *counter, > + struct counter_count *count, > + struct count_read_value *val) > +{ > + struct stm32_timer_cnt *const priv = counter->priv; > + u32 cnt; > + > + regmap_read(priv->regmap, TIM_CNT, &cnt); > + count_read_value_set(val, COUNT_POSITION, &cnt); > + > + return 0; > +} > + > +static int stm32_count_write(struct counter_device *counter, > + struct counter_count *count, > + struct count_write_value *val) > +{ > + struct stm32_timer_cnt *const priv = counter->priv; > + u32 cnt; > + int err; > + > + err = count_write_value_get(&cnt, COUNT_POSITION, val); > + if (err) > + return err; > + > + if (cnt > priv->ceiling) > + return -EINVAL; > + > + return regmap_write(priv->regmap, TIM_CNT, cnt); > +} > + > +static int stm32_count_function_get(struct counter_device *counter, > + struct counter_count *count, > + size_t *function) > +{ > + struct stm32_timer_cnt *const priv = counter->priv; > + u32 smcr; > + > + regmap_read(priv->regmap, TIM_SMCR, &smcr); > + > + switch (smcr & TIM_SMCR_SMS) { > + case 1: > + *function = STM32_COUNT_ENCODER_MODE_1; > + return 0; > + case 2: > + *function = STM32_COUNT_ENCODER_MODE_2; > + return 0; > + case 3: > + *function = STM32_COUNT_ENCODER_MODE_3; > + return 0; > + } > + > + return -EINVAL; > +} > + > +static int stm32_count_function_set(struct counter_device *counter, > + struct counter_count *count, > + size_t function) > +{ > + struct stm32_timer_cnt *const priv = counter->priv; > + u32 cr1, sms; > + > + switch (function) { > + case STM32_COUNT_ENCODER_MODE_1: > + sms = 1; > + break; > + case STM32_COUNT_ENCODER_MODE_2: > + sms = 2; > + break; > + case STM32_COUNT_ENCODER_MODE_3: > + sms = 3; > + break; > + default: > + sms = 0; > + break; > + } > + > + /* Store enable status */ > + regmap_read(priv->regmap, TIM_CR1, &cr1); > + > + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0); > + > + /* TIMx_ARR register shouldn't be buffered (ARPE=0) */ > + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, 0); > + regmap_write(priv->regmap, TIM_ARR, priv->ceiling); > + > + regmap_update_bits(priv->regmap, TIM_SMCR, TIM_SMCR_SMS, sms); > + > + /* Make sure that registers are updated */ > + regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG); > + > + /* Restore the enable status */ > + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, cr1); > + > + return 0; > +} > + > +static ssize_t stm32_count_direction_read(struct counter_device *counter, > + struct counter_count *count, > + void *private, char *buf) > +{ > + struct stm32_timer_cnt *const priv = counter->priv; > + const char *direction; > + u32 cr1; > + > + regmap_read(priv->regmap, TIM_CR1, &cr1); > + direction = (cr1 & TIM_CR1_DIR) ? "backward" : "forward"; > + > + return scnprintf(buf, PAGE_SIZE, "%s\n", direction); > +} > + > +static ssize_t stm32_count_ceiling_read(struct counter_device *counter, > + struct counter_count *count, > + void *private, char *buf) > +{ > + struct stm32_timer_cnt *const priv = counter->priv; > + u32 arr; > + > + regmap_read(priv->regmap, TIM_ARR, &arr); > + > + return snprintf(buf, PAGE_SIZE, "%u\n", arr); > +} > + > +static ssize_t stm32_count_ceiling_write(struct counter_device *counter, > + struct counter_count *count, > + void *private, > + const char *buf, size_t len) > +{ > + struct stm32_timer_cnt *const priv = counter->priv; > + unsigned int ceiling; > + int ret; > + > + ret = kstrtouint(buf, 0, &ceiling); > + if (ret) > + return ret; > + > + /* TIMx_ARR register shouldn't be buffered (ARPE=0) */ > + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, 0); > + regmap_write(priv->regmap, TIM_ARR, ceiling); > + > + priv->ceiling = ceiling; > + return len; > +} > + > +static ssize_t stm32_count_enable_read(struct counter_device *counter, > + struct counter_count *count, > + void *private, char *buf) > +{ > + struct stm32_timer_cnt *const priv = counter->priv; > + u32 cr1; > + > + regmap_read(priv->regmap, TIM_CR1, &cr1); > + > + return scnprintf(buf, PAGE_SIZE, "%d\n", (bool)(cr1 & TIM_CR1_CEN)); > +} > + > +static ssize_t stm32_count_enable_write(struct counter_device *counter, > + struct counter_count *count, > + void *private, > + const char *buf, size_t len) > +{ > + struct stm32_timer_cnt *const priv = counter->priv; > + int err; > + u32 cr1; > + bool enable; > + > + err = kstrtobool(buf, &enable); > + if (err) > + return err; > + > + if (enable) { > + regmap_read(priv->regmap, TIM_CR1, &cr1); > + if (!(cr1 & TIM_CR1_CEN)) > + clk_enable(priv->clk); > + > + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, > + TIM_CR1_CEN); > + } else { > + regmap_read(priv->regmap, TIM_CR1, &cr1); > + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0); > + if (cr1 & TIM_CR1_CEN) > + clk_disable(priv->clk); > + } > + > + return len; > +} > + > +static const struct counter_count_ext stm32_count_ext[] = { > + { > + .name = "direction", > + .read = stm32_count_direction_read, > + }, > + { > + .name = "enable", > + .read = stm32_count_enable_read, > + .write = stm32_count_enable_write > + }, > + { > + .name = "ceiling", > + .read = stm32_count_ceiling_read, > + .write = stm32_count_ceiling_write > + }, > +}; > + > +enum stm32_synapse_action { > + STM32_SYNAPSE_ACTION_NONE, > + STM32_SYNAPSE_ACTION_BOTH_EDGES > +}; > + > +static enum synapse_action stm32_synapse_actions[] = { > + [STM32_SYNAPSE_ACTION_NONE] = SYNAPSE_ACTION_NONE, > + [STM32_SYNAPSE_ACTION_BOTH_EDGES] = SYNAPSE_ACTION_BOTH_EDGES > +}; > + > +static int stm32_action_get(struct counter_device *counter, > + struct counter_count *count, > + struct counter_synapse *synapse, > + size_t *action) > +{ > + size_t function; > + int err; > + > + /* Default action mode (e.g. STM32_COUNT_SLAVE_MODE_DISABLED) */ > + *action = STM32_SYNAPSE_ACTION_NONE; > + > + err = stm32_count_function_get(counter, count, &function); > + if (err) > + return 0; > + > + switch (function) { > + case STM32_COUNT_ENCODER_MODE_1: > + /* counts up/down on TI1FP1 edge depending on TI2FP2 level */ > + if (synapse->signal->id == count->synapses[0].signal->id) > + *action = STM32_SYNAPSE_ACTION_BOTH_EDGES; > + break; > + case STM32_COUNT_ENCODER_MODE_2: > + /* counts up/down on TI2FP2 edge depending on TI1FP1 level */ > + if (synapse->signal->id == count->synapses[1].signal->id) > + *action = STM32_SYNAPSE_ACTION_BOTH_EDGES; > + break; > + case STM32_COUNT_ENCODER_MODE_3: > + /* counts up/down on both TI1FP1 and TI2FP2 edges */ > + *action = STM32_SYNAPSE_ACTION_BOTH_EDGES; > + break; > + } > + > + return 0; > +} > + > +static const struct counter_ops stm32_timer_cnt_ops = { > + .count_read = stm32_count_read, > + .count_write = stm32_count_write, > + .function_get = stm32_count_function_get, > + .function_set = stm32_count_function_set, > + .action_get = stm32_action_get, > +}; > + > +static struct counter_signal stm32_signals[] = { > + { > + .id = 0, > + .name = "Channel 1 Quadrature A" > + }, > + { > + .id = 1, > + .name = "Channel 1 Quadrature B" > + } > +}; > + > +static struct counter_synapse stm32_count_synapses[] = { > + { > + .actions_list = stm32_synapse_actions, > + .num_actions = ARRAY_SIZE(stm32_synapse_actions), > + .signal = &stm32_signals[0] > + }, > + { > + .actions_list = stm32_synapse_actions, > + .num_actions = ARRAY_SIZE(stm32_synapse_actions), > + .signal = &stm32_signals[1] > + } > +}; > + > +static struct counter_count stm32_counts = { > + .id = 0, > + .name = "Channel 1 Count", > + .functions_list = stm32_count_functions, > + .num_functions = ARRAY_SIZE(stm32_count_functions), > + .synapses = stm32_count_synapses, > + .num_synapses = ARRAY_SIZE(stm32_count_synapses), > + .ext = stm32_count_ext, > + .num_ext = ARRAY_SIZE(stm32_count_ext) > +}; > + > +static int stm32_timer_cnt_probe(struct platform_device *pdev) > +{ > + struct stm32_timers *ddata = dev_get_drvdata(pdev->dev.parent); > + struct device *dev = &pdev->dev; > + struct stm32_timer_cnt *priv; > + > + if (IS_ERR_OR_NULL(ddata)) > + return -EINVAL; > + > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); > + if (!priv) > + return -ENOMEM; > + > + priv->regmap = ddata->regmap; > + priv->clk = ddata->clk; > + priv->ceiling = ddata->max_arr; > + > + priv->counter.name = dev_name(dev); > + priv->counter.parent = dev; > + priv->counter.ops = &stm32_timer_cnt_ops; > + priv->counter.counts = &stm32_counts; > + priv->counter.num_counts = 1; > + priv->counter.signals = stm32_signals; > + priv->counter.num_signals = ARRAY_SIZE(stm32_signals); > + priv->counter.priv = priv; > + > + /* Register Counter device */ > + return devm_counter_register(dev, &priv->counter); > +} > + > +static const struct of_device_id stm32_timer_cnt_of_match[] = { > + { .compatible = "st,stm32-timer-counter", }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, stm32_timer_cnt_of_match); > + > +static struct platform_driver stm32_timer_cnt_driver = { > + .probe = stm32_timer_cnt_probe, > + .driver = { > + .name = "stm32-timer-counter", > + .of_match_table = stm32_timer_cnt_of_match, > + }, > +}; > +module_platform_driver(stm32_timer_cnt_driver); > + > +MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard@st.com>"); > +MODULE_ALIAS("platform:stm32-timer-counter"); > +MODULE_DESCRIPTION("STMicroelectronics STM32 TIMER counter driver"); > +MODULE_LICENSE("GPL v2");
diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig index 7646f5df76f3..fcfbaa935122 100644 --- a/drivers/counter/Kconfig +++ b/drivers/counter/Kconfig @@ -36,4 +36,14 @@ config 104_QUAD_8 The base port addresses for the devices may be configured via the base array module parameter. +config STM32_TIMER_CNT + tristate "STM32 Timer encoder counter driver" + depends on MFD_STM32_TIMERS || COMPILE_TEST + help + Select this option to enable STM32 Timer quadrature encoder + and counter driver. + + To compile this driver as a module, choose M here: the + module will be called stm32-timer-cnt. + endif # COUNTER diff --git a/drivers/counter/Makefile b/drivers/counter/Makefile index 23a4f6263e45..ff024259fb46 100644 --- a/drivers/counter/Makefile +++ b/drivers/counter/Makefile @@ -8,3 +8,4 @@ obj-$(CONFIG_COUNTER) += counter.o counter-y := generic-counter.o obj-$(CONFIG_104_QUAD_8) += 104-quad-8.o +obj-$(CONFIG_STM32_TIMER_CNT) += stm32-timer-cnt.o diff --git a/drivers/counter/stm32-timer-cnt.c b/drivers/counter/stm32-timer-cnt.c new file mode 100644 index 000000000000..0b15e729798b --- /dev/null +++ b/drivers/counter/stm32-timer-cnt.c @@ -0,0 +1,390 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * STM32 Timer Encoder and Counter driver + * + * Copyright (C) STMicroelectronics 2018 + * + * Author: Benjamin Gaignard <benjamin.gaignard@st.com> + * + */ +#include <linux/counter.h> +#include <linux/iio/iio.h> +#include <linux/iio/types.h> +#include <linux/mfd/stm32-timers.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#define TIM_CCMR_CCXS (BIT(8) | BIT(0)) +#define TIM_CCMR_MASK (TIM_CCMR_CC1S | TIM_CCMR_CC2S | \ + TIM_CCMR_IC1F | TIM_CCMR_IC2F) +#define TIM_CCER_MASK (TIM_CCER_CC1P | TIM_CCER_CC1NP | \ + TIM_CCER_CC2P | TIM_CCER_CC2NP) + +struct stm32_timer_cnt { + struct counter_device counter; + struct regmap *regmap; + struct clk *clk; + u32 ceiling; +}; + +/** + * stm32_count_function - enumerates stm32 timer counter encoder modes + * @STM32_COUNT_SLAVE_MODE_DISABLED: counts on internal clock when CEN=1 + * @STM32_COUNT_ENCODER_MODE_1: counts TI1FP1 edges, depending on TI2FP2 level + * @STM32_COUNT_ENCODER_MODE_2: counts TI2FP2 edges, depending on TI1FP1 level + * @STM32_COUNT_ENCODER_MODE_3: counts on both TI1FP1 and TI2FP2 edges + */ +enum stm32_count_function { + STM32_COUNT_SLAVE_MODE_DISABLED = -1, + STM32_COUNT_ENCODER_MODE_1, + STM32_COUNT_ENCODER_MODE_2, + STM32_COUNT_ENCODER_MODE_3, +}; + +static enum count_function stm32_count_functions[] = { + [STM32_COUNT_ENCODER_MODE_1] = COUNT_FUNCTION_QUADRATURE_X2_A, + [STM32_COUNT_ENCODER_MODE_2] = COUNT_FUNCTION_QUADRATURE_X2_B, + [STM32_COUNT_ENCODER_MODE_3] = COUNT_FUNCTION_QUADRATURE_X4, +}; + +static int stm32_count_read(struct counter_device *counter, + struct counter_count *count, + struct count_read_value *val) +{ + struct stm32_timer_cnt *const priv = counter->priv; + u32 cnt; + + regmap_read(priv->regmap, TIM_CNT, &cnt); + count_read_value_set(val, COUNT_POSITION, &cnt); + + return 0; +} + +static int stm32_count_write(struct counter_device *counter, + struct counter_count *count, + struct count_write_value *val) +{ + struct stm32_timer_cnt *const priv = counter->priv; + u32 cnt; + int err; + + err = count_write_value_get(&cnt, COUNT_POSITION, val); + if (err) + return err; + + if (cnt > priv->ceiling) + return -EINVAL; + + return regmap_write(priv->regmap, TIM_CNT, cnt); +} + +static int stm32_count_function_get(struct counter_device *counter, + struct counter_count *count, + size_t *function) +{ + struct stm32_timer_cnt *const priv = counter->priv; + u32 smcr; + + regmap_read(priv->regmap, TIM_SMCR, &smcr); + + switch (smcr & TIM_SMCR_SMS) { + case 1: + *function = STM32_COUNT_ENCODER_MODE_1; + return 0; + case 2: + *function = STM32_COUNT_ENCODER_MODE_2; + return 0; + case 3: + *function = STM32_COUNT_ENCODER_MODE_3; + return 0; + } + + return -EINVAL; +} + +static int stm32_count_function_set(struct counter_device *counter, + struct counter_count *count, + size_t function) +{ + struct stm32_timer_cnt *const priv = counter->priv; + u32 cr1, sms; + + switch (function) { + case STM32_COUNT_ENCODER_MODE_1: + sms = 1; + break; + case STM32_COUNT_ENCODER_MODE_2: + sms = 2; + break; + case STM32_COUNT_ENCODER_MODE_3: + sms = 3; + break; + default: + sms = 0; + break; + } + + /* Store enable status */ + regmap_read(priv->regmap, TIM_CR1, &cr1); + + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0); + + /* TIMx_ARR register shouldn't be buffered (ARPE=0) */ + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, 0); + regmap_write(priv->regmap, TIM_ARR, priv->ceiling); + + regmap_update_bits(priv->regmap, TIM_SMCR, TIM_SMCR_SMS, sms); + + /* Make sure that registers are updated */ + regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG); + + /* Restore the enable status */ + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, cr1); + + return 0; +} + +static ssize_t stm32_count_direction_read(struct counter_device *counter, + struct counter_count *count, + void *private, char *buf) +{ + struct stm32_timer_cnt *const priv = counter->priv; + const char *direction; + u32 cr1; + + regmap_read(priv->regmap, TIM_CR1, &cr1); + direction = (cr1 & TIM_CR1_DIR) ? "backward" : "forward"; + + return scnprintf(buf, PAGE_SIZE, "%s\n", direction); +} + +static ssize_t stm32_count_ceiling_read(struct counter_device *counter, + struct counter_count *count, + void *private, char *buf) +{ + struct stm32_timer_cnt *const priv = counter->priv; + u32 arr; + + regmap_read(priv->regmap, TIM_ARR, &arr); + + return snprintf(buf, PAGE_SIZE, "%u\n", arr); +} + +static ssize_t stm32_count_ceiling_write(struct counter_device *counter, + struct counter_count *count, + void *private, + const char *buf, size_t len) +{ + struct stm32_timer_cnt *const priv = counter->priv; + unsigned int ceiling; + int ret; + + ret = kstrtouint(buf, 0, &ceiling); + if (ret) + return ret; + + /* TIMx_ARR register shouldn't be buffered (ARPE=0) */ + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, 0); + regmap_write(priv->regmap, TIM_ARR, ceiling); + + priv->ceiling = ceiling; + return len; +} + +static ssize_t stm32_count_enable_read(struct counter_device *counter, + struct counter_count *count, + void *private, char *buf) +{ + struct stm32_timer_cnt *const priv = counter->priv; + u32 cr1; + + regmap_read(priv->regmap, TIM_CR1, &cr1); + + return scnprintf(buf, PAGE_SIZE, "%d\n", (bool)(cr1 & TIM_CR1_CEN)); +} + +static ssize_t stm32_count_enable_write(struct counter_device *counter, + struct counter_count *count, + void *private, + const char *buf, size_t len) +{ + struct stm32_timer_cnt *const priv = counter->priv; + int err; + u32 cr1; + bool enable; + + err = kstrtobool(buf, &enable); + if (err) + return err; + + if (enable) { + regmap_read(priv->regmap, TIM_CR1, &cr1); + if (!(cr1 & TIM_CR1_CEN)) + clk_enable(priv->clk); + + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, + TIM_CR1_CEN); + } else { + regmap_read(priv->regmap, TIM_CR1, &cr1); + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0); + if (cr1 & TIM_CR1_CEN) + clk_disable(priv->clk); + } + + return len; +} + +static const struct counter_count_ext stm32_count_ext[] = { + { + .name = "direction", + .read = stm32_count_direction_read, + }, + { + .name = "enable", + .read = stm32_count_enable_read, + .write = stm32_count_enable_write + }, + { + .name = "ceiling", + .read = stm32_count_ceiling_read, + .write = stm32_count_ceiling_write + }, +}; + +enum stm32_synapse_action { + STM32_SYNAPSE_ACTION_NONE, + STM32_SYNAPSE_ACTION_BOTH_EDGES +}; + +static enum synapse_action stm32_synapse_actions[] = { + [STM32_SYNAPSE_ACTION_NONE] = SYNAPSE_ACTION_NONE, + [STM32_SYNAPSE_ACTION_BOTH_EDGES] = SYNAPSE_ACTION_BOTH_EDGES +}; + +static int stm32_action_get(struct counter_device *counter, + struct counter_count *count, + struct counter_synapse *synapse, + size_t *action) +{ + size_t function; + int err; + + /* Default action mode (e.g. STM32_COUNT_SLAVE_MODE_DISABLED) */ + *action = STM32_SYNAPSE_ACTION_NONE; + + err = stm32_count_function_get(counter, count, &function); + if (err) + return 0; + + switch (function) { + case STM32_COUNT_ENCODER_MODE_1: + /* counts up/down on TI1FP1 edge depending on TI2FP2 level */ + if (synapse->signal->id == count->synapses[0].signal->id) + *action = STM32_SYNAPSE_ACTION_BOTH_EDGES; + break; + case STM32_COUNT_ENCODER_MODE_2: + /* counts up/down on TI2FP2 edge depending on TI1FP1 level */ + if (synapse->signal->id == count->synapses[1].signal->id) + *action = STM32_SYNAPSE_ACTION_BOTH_EDGES; + break; + case STM32_COUNT_ENCODER_MODE_3: + /* counts up/down on both TI1FP1 and TI2FP2 edges */ + *action = STM32_SYNAPSE_ACTION_BOTH_EDGES; + break; + } + + return 0; +} + +static const struct counter_ops stm32_timer_cnt_ops = { + .count_read = stm32_count_read, + .count_write = stm32_count_write, + .function_get = stm32_count_function_get, + .function_set = stm32_count_function_set, + .action_get = stm32_action_get, +}; + +static struct counter_signal stm32_signals[] = { + { + .id = 0, + .name = "Channel 1 Quadrature A" + }, + { + .id = 1, + .name = "Channel 1 Quadrature B" + } +}; + +static struct counter_synapse stm32_count_synapses[] = { + { + .actions_list = stm32_synapse_actions, + .num_actions = ARRAY_SIZE(stm32_synapse_actions), + .signal = &stm32_signals[0] + }, + { + .actions_list = stm32_synapse_actions, + .num_actions = ARRAY_SIZE(stm32_synapse_actions), + .signal = &stm32_signals[1] + } +}; + +static struct counter_count stm32_counts = { + .id = 0, + .name = "Channel 1 Count", + .functions_list = stm32_count_functions, + .num_functions = ARRAY_SIZE(stm32_count_functions), + .synapses = stm32_count_synapses, + .num_synapses = ARRAY_SIZE(stm32_count_synapses), + .ext = stm32_count_ext, + .num_ext = ARRAY_SIZE(stm32_count_ext) +}; + +static int stm32_timer_cnt_probe(struct platform_device *pdev) +{ + struct stm32_timers *ddata = dev_get_drvdata(pdev->dev.parent); + struct device *dev = &pdev->dev; + struct stm32_timer_cnt *priv; + + if (IS_ERR_OR_NULL(ddata)) + return -EINVAL; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->regmap = ddata->regmap; + priv->clk = ddata->clk; + priv->ceiling = ddata->max_arr; + + priv->counter.name = dev_name(dev); + priv->counter.parent = dev; + priv->counter.ops = &stm32_timer_cnt_ops; + priv->counter.counts = &stm32_counts; + priv->counter.num_counts = 1; + priv->counter.signals = stm32_signals; + priv->counter.num_signals = ARRAY_SIZE(stm32_signals); + priv->counter.priv = priv; + + /* Register Counter device */ + return devm_counter_register(dev, &priv->counter); +} + +static const struct of_device_id stm32_timer_cnt_of_match[] = { + { .compatible = "st,stm32-timer-counter", }, + {}, +}; +MODULE_DEVICE_TABLE(of, stm32_timer_cnt_of_match); + +static struct platform_driver stm32_timer_cnt_driver = { + .probe = stm32_timer_cnt_probe, + .driver = { + .name = "stm32-timer-counter", + .of_match_table = stm32_timer_cnt_of_match, + }, +}; +module_platform_driver(stm32_timer_cnt_driver); + +MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard@st.com>"); +MODULE_ALIAS("platform:stm32-timer-counter"); +MODULE_DESCRIPTION("STMicroelectronics STM32 TIMER counter driver"); +MODULE_LICENSE("GPL v2");