| Message ID | 20180625063840.30173-2-vkoul@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Jun 25, 2018 at 12:08:36PM +0530, Vinod Koul wrote: > The Power On driver for Qcom PM 8xxx is a MFD supporting pwrkey and > resin along with the Android reboot-mode. > Add the binding describing this. > > Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> > Signed-off-by: Vinod Koul <vkoul@kernel.org> > --- > .../devicetree/bindings/power/reset/qcom,pon.txt | 45 ++++++++++++++++++++++ > 1 file changed, 45 insertions(+) > create mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.txt > > diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt > new file mode 100644 > index 000000000000..0dc24c9b93d5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt > @@ -0,0 +1,45 @@ > +Qualcomm PON Driver Bindings are for h/w, not drivers... > + > +The Power On driver for Qualcomm PM8xxx is MFD supporting pwrkey and > +resin along with the Android reboot-mode. > + > +This DT node has pwrkey and resin as sub nodes. > + > +Required Properties: > +-compatible: "qcom,pm8916-pon" > +-reg: Specifies the physical address of the pon register > + > +Optional subnodes: > +-prwrkey: Specifies the subnode pwrkey and should follow the typo > + qcom,pm8xxx-pwrkey.txt description. > +-resin: Specifies the subnode resin and should follow the > + qcom,pm8xxx-pwrkey.txt description. > + > +The rest of the properties should follow the generic reboot-mode description > +found in reboot-mode.txt > + > +Example: > + > + pon@800 { > + compatible = "qcom,pm8916-pon"; > + > + reg = <0x800>; > + mode-bootloader = <0x2>; > + mode-recovery = <0x1>; > + > + pwrkey { > + compatible = "qcom,pm8941-pwrkey"; > + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; > + debounce = <15625>; > + bias-pull-up; > + linux,code = <KEY_POWER>; > + }; > + > + resin { > + compatible = "qcom,pm8941-resin"; Not documented. > + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; > + debounce = <15625>; > + bias-pull-up; > + linux,code = <KEY_VOLUMEDOWN>; > + }; > + }; > -- > 2.14.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 25-06-18, 11:27, Rob Herring wrote: > On Mon, Jun 25, 2018 at 12:08:36PM +0530, Vinod Koul wrote: > > The Power On driver for Qcom PM 8xxx is a MFD supporting pwrkey and > > resin along with the Android reboot-mode. > > Add the binding describing this. > > > > Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > Signed-off-by: Vinod Koul <vkoul@kernel.org> > > --- > > .../devicetree/bindings/power/reset/qcom,pon.txt | 45 ++++++++++++++++++++++ > > 1 file changed, 45 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.txt > > > > diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt > > new file mode 100644 > > index 000000000000..0dc24c9b93d5 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt > > @@ -0,0 +1,45 @@ > > +Qualcomm PON Driver > > Bindings are for h/w, not drivers... Thanks, will fix > > +The Power On driver for Qualcomm PM8xxx is MFD supporting pwrkey and > > +resin along with the Android reboot-mode. > > + > > +This DT node has pwrkey and resin as sub nodes. > > + > > +Required Properties: > > +-compatible: "qcom,pm8916-pon" > > +-reg: Specifies the physical address of the pon register > > + > > +Optional subnodes: > > +-prwrkey: Specifies the subnode pwrkey and should follow the > > typo Hmmm which one? > > + qcom,pm8xxx-pwrkey.txt description. > > +-resin: Specifies the subnode resin and should follow the > > + qcom,pm8xxx-pwrkey.txt description. > > + > > +The rest of the properties should follow the generic reboot-mode description > > +found in reboot-mode.txt > > + > > +Example: > > + > > + pon@800 { > > + compatible = "qcom,pm8916-pon"; > > + > > + reg = <0x800>; > > + mode-bootloader = <0x2>; > > + mode-recovery = <0x1>; > > + > > + pwrkey { > > + compatible = "qcom,pm8941-pwrkey"; > > + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; > > + debounce = <15625>; > > + bias-pull-up; > > + linux,code = <KEY_POWER>; > > + }; > > + > > + resin { > > + compatible = "qcom,pm8941-resin"; > > Not documented. qcom,pm8xxx-pwrkey.txt documents this. Subnode documentation is not provided here
On Mon, Jun 25, 2018 at 9:51 PM Vinod <vkoul@kernel.org> wrote: > > On 25-06-18, 11:27, Rob Herring wrote: > > On Mon, Jun 25, 2018 at 12:08:36PM +0530, Vinod Koul wrote: > > > The Power On driver for Qcom PM 8xxx is a MFD supporting pwrkey and > > > resin along with the Android reboot-mode. > > > Add the binding describing this. > > > > > > Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > > Signed-off-by: Vinod Koul <vkoul@kernel.org> > > > --- > > > .../devicetree/bindings/power/reset/qcom,pon.txt | 45 ++++++++++++++++++++++ > > > 1 file changed, 45 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.txt > > > > > > diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt > > > new file mode 100644 > > > index 000000000000..0dc24c9b93d5 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt > > > @@ -0,0 +1,45 @@ > > > +Qualcomm PON Driver > > > > Bindings are for h/w, not drivers... > > Thanks, will fix > > > > +The Power On driver for Qualcomm PM8xxx is MFD supporting pwrkey and > > > +resin along with the Android reboot-mode. > > > + > > > +This DT node has pwrkey and resin as sub nodes. > > > + > > > +Required Properties: > > > +-compatible: "qcom,pm8916-pon" > > > +-reg: Specifies the physical address of the pon register > > > + > > > +Optional subnodes: > > > +-prwrkey: Specifies the subnode pwrkey and should follow the > > > > typo > > > Hmmm which one? s/prwrkey/pwrkey/ > > > > + qcom,pm8xxx-pwrkey.txt description. > > > +-resin: Specifies the subnode resin and should follow the > > > + qcom,pm8xxx-pwrkey.txt description. > > > + > > > +The rest of the properties should follow the generic reboot-mode description > > > +found in reboot-mode.txt > > > + > > > +Example: > > > + > > > + pon@800 { > > > + compatible = "qcom,pm8916-pon"; > > > + > > > + reg = <0x800>; > > > + mode-bootloader = <0x2>; > > > + mode-recovery = <0x1>; > > > + > > > + pwrkey { > > > + compatible = "qcom,pm8941-pwrkey"; > > > + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; > > > + debounce = <15625>; > > > + bias-pull-up; > > > + linux,code = <KEY_POWER>; > > > + }; > > > + > > > + resin { > > > + compatible = "qcom,pm8941-resin"; > > > > Not documented. > > qcom,pm8xxx-pwrkey.txt documents this. Subnode documentation is not > provided here Is it new because it is not in any tree I see. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 26-06-18, 08:47, Rob Herring wrote: > > > > +-prwrkey: Specifies the subnode pwrkey and should follow the > > > > > > typo > > > > > > Hmmm which one? > > s/prwrkey/pwrkey/ Ah good spot, will fix > > > > + resin { > > > > + compatible = "qcom,pm8941-resin"; > > > > > > Not documented. > > > > qcom,pm8xxx-pwrkey.txt documents this. Subnode documentation is not > > provided here > > Is it new because it is not in any tree I see. Sorry wrong name, it is Documented in Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt and I missed adding qcom,pm8941-resin, will add to this series. Thanks
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt new file mode 100644 index 000000000000..0dc24c9b93d5 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt @@ -0,0 +1,45 @@ +Qualcomm PON Driver + +The Power On driver for Qualcomm PM8xxx is MFD supporting pwrkey and +resin along with the Android reboot-mode. + +This DT node has pwrkey and resin as sub nodes. + +Required Properties: +-compatible: "qcom,pm8916-pon" +-reg: Specifies the physical address of the pon register + +Optional subnodes: +-prwrkey: Specifies the subnode pwrkey and should follow the + qcom,pm8xxx-pwrkey.txt description. +-resin: Specifies the subnode resin and should follow the + qcom,pm8xxx-pwrkey.txt description. + +The rest of the properties should follow the generic reboot-mode description +found in reboot-mode.txt + +Example: + + pon@800 { + compatible = "qcom,pm8916-pon"; + + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; + };