| Message ID | 20180626013409.5125-2-elder@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon 25 Jun 18:34 PDT 2018, Alex Elder wrote: > From: Bjorn Andersson <bjorn.andersson@linaro.org> > > "start" and "stop" are more suitable names for how these two operations > are used, and they fit better with the upcoming introduction of two > additional operations in the struct. > > [elder@linaro.org: minor comment edits] > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > Acked-by: Alex Elder <elder@linaro.org> > Tested-by: Fabien Dessenne <fabien.dessenne@st.com> Sorry for not spotting this before, but per section 11 of Documentation/process/submitting-patches.rst the tag part should read: Tested-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [elder@linaro.org: minor comment edits] Signed-off-by: Alex Elder <elder@linaro.org> I.e. as you're sending the email you must be the last one certifying the origin of the patch. Regards, Bjorn > --- > drivers/remoteproc/remoteproc_core.c | 30 ++++++++++++++-------------- > include/linux/remoteproc.h | 14 ++++++------- > 2 files changed, 22 insertions(+), 22 deletions(-) > > diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c > index a9609d971f7f..5dd58e6bea88 100644 > --- a/drivers/remoteproc/remoteproc_core.c > +++ b/drivers/remoteproc/remoteproc_core.c > @@ -774,13 +774,13 @@ static int rproc_handle_resources(struct rproc *rproc, > return ret; > } > > -static int rproc_probe_subdevices(struct rproc *rproc) > +static int rproc_start_subdevices(struct rproc *rproc) > { > struct rproc_subdev *subdev; > int ret; > > list_for_each_entry(subdev, &rproc->subdevs, node) { > - ret = subdev->probe(subdev); > + ret = subdev->start(subdev); > if (ret) > goto unroll_registration; > } > @@ -789,17 +789,17 @@ static int rproc_probe_subdevices(struct rproc *rproc) > > unroll_registration: > list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node) > - subdev->remove(subdev, true); > + subdev->stop(subdev, true); > > return ret; > } > > -static void rproc_remove_subdevices(struct rproc *rproc, bool crashed) > +static void rproc_stop_subdevices(struct rproc *rproc, bool crashed) > { > struct rproc_subdev *subdev; > > list_for_each_entry_reverse(subdev, &rproc->subdevs, node) > - subdev->remove(subdev, crashed); > + subdev->stop(subdev, crashed); > } > > /** > @@ -901,8 +901,8 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw) > return ret; > } > > - /* probe any subdevices for the remote processor */ > - ret = rproc_probe_subdevices(rproc); > + /* Start any subdevices for the remote processor */ > + ret = rproc_start_subdevices(rproc); > if (ret) { > dev_err(dev, "failed to probe subdevices for %s: %d\n", > rproc->name, ret); > @@ -1014,8 +1014,8 @@ static int rproc_stop(struct rproc *rproc, bool crashed) > struct device *dev = &rproc->dev; > int ret; > > - /* remove any subdevices for the remote processor */ > - rproc_remove_subdevices(rproc, crashed); > + /* Stop any subdevices for the remote processor */ > + rproc_stop_subdevices(rproc, crashed); > > /* the installed resource table is no longer accessible */ > rproc->table_ptr = rproc->cached_table; > @@ -1657,16 +1657,16 @@ EXPORT_SYMBOL(rproc_del); > * rproc_add_subdev() - add a subdevice to a remoteproc > * @rproc: rproc handle to add the subdevice to > * @subdev: subdev handle to register > - * @probe: function to call when the rproc boots > - * @remove: function to call when the rproc shuts down > + * @start: function to call after the rproc is started > + * @stop: function to call before the rproc is stopped > */ > void rproc_add_subdev(struct rproc *rproc, > struct rproc_subdev *subdev, > - int (*probe)(struct rproc_subdev *subdev), > - void (*remove)(struct rproc_subdev *subdev, bool crashed)) > + int (*start)(struct rproc_subdev *subdev), > + void (*stop)(struct rproc_subdev *subdev, bool crashed)) > { > - subdev->probe = probe; > - subdev->remove = remove; > + subdev->start = start; > + subdev->stop = stop; > > list_add_tail(&subdev->node, &rproc->subdevs); > } > diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h > index dfdaede9139e..bf55bf2a5ee1 100644 > --- a/include/linux/remoteproc.h > +++ b/include/linux/remoteproc.h > @@ -477,15 +477,15 @@ struct rproc { > /** > * struct rproc_subdev - subdevice tied to a remoteproc > * @node: list node related to the rproc subdevs list > - * @probe: probe function, called as the rproc is started > - * @remove: remove function, called as the rproc is being stopped, the @crashed > - * parameter indicates if this originates from the a recovery > + * @start: start function, called after the rproc has been started > + * @stop: stop function, called before the rproc is stopped; the @crashed > + * parameter indicates if this originates from a recovery > */ > struct rproc_subdev { > struct list_head node; > > - int (*probe)(struct rproc_subdev *subdev); > - void (*remove)(struct rproc_subdev *subdev, bool crashed); > + int (*start)(struct rproc_subdev *subdev); > + void (*stop)(struct rproc_subdev *subdev, bool crashed); > }; > > /* we currently support only two vrings per rvdev */ > @@ -568,8 +568,8 @@ static inline struct rproc *vdev_to_rproc(struct virtio_device *vdev) > > void rproc_add_subdev(struct rproc *rproc, > struct rproc_subdev *subdev, > - int (*probe)(struct rproc_subdev *subdev), > - void (*remove)(struct rproc_subdev *subdev, bool crashed)); > + int (*start)(struct rproc_subdev *subdev), > + void (*stop)(struct rproc_subdev *subdev, bool crashed)); > > void rproc_remove_subdev(struct rproc *rproc, struct rproc_subdev *subdev); > > -- > 2.17.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index a9609d971f7f..5dd58e6bea88 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -774,13 +774,13 @@ static int rproc_handle_resources(struct rproc *rproc, return ret; } -static int rproc_probe_subdevices(struct rproc *rproc) +static int rproc_start_subdevices(struct rproc *rproc) { struct rproc_subdev *subdev; int ret; list_for_each_entry(subdev, &rproc->subdevs, node) { - ret = subdev->probe(subdev); + ret = subdev->start(subdev); if (ret) goto unroll_registration; } @@ -789,17 +789,17 @@ static int rproc_probe_subdevices(struct rproc *rproc) unroll_registration: list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node) - subdev->remove(subdev, true); + subdev->stop(subdev, true); return ret; } -static void rproc_remove_subdevices(struct rproc *rproc, bool crashed) +static void rproc_stop_subdevices(struct rproc *rproc, bool crashed) { struct rproc_subdev *subdev; list_for_each_entry_reverse(subdev, &rproc->subdevs, node) - subdev->remove(subdev, crashed); + subdev->stop(subdev, crashed); } /** @@ -901,8 +901,8 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw) return ret; } - /* probe any subdevices for the remote processor */ - ret = rproc_probe_subdevices(rproc); + /* Start any subdevices for the remote processor */ + ret = rproc_start_subdevices(rproc); if (ret) { dev_err(dev, "failed to probe subdevices for %s: %d\n", rproc->name, ret); @@ -1014,8 +1014,8 @@ static int rproc_stop(struct rproc *rproc, bool crashed) struct device *dev = &rproc->dev; int ret; - /* remove any subdevices for the remote processor */ - rproc_remove_subdevices(rproc, crashed); + /* Stop any subdevices for the remote processor */ + rproc_stop_subdevices(rproc, crashed); /* the installed resource table is no longer accessible */ rproc->table_ptr = rproc->cached_table; @@ -1657,16 +1657,16 @@ EXPORT_SYMBOL(rproc_del); * rproc_add_subdev() - add a subdevice to a remoteproc * @rproc: rproc handle to add the subdevice to * @subdev: subdev handle to register - * @probe: function to call when the rproc boots - * @remove: function to call when the rproc shuts down + * @start: function to call after the rproc is started + * @stop: function to call before the rproc is stopped */ void rproc_add_subdev(struct rproc *rproc, struct rproc_subdev *subdev, - int (*probe)(struct rproc_subdev *subdev), - void (*remove)(struct rproc_subdev *subdev, bool crashed)) + int (*start)(struct rproc_subdev *subdev), + void (*stop)(struct rproc_subdev *subdev, bool crashed)) { - subdev->probe = probe; - subdev->remove = remove; + subdev->start = start; + subdev->stop = stop; list_add_tail(&subdev->node, &rproc->subdevs); } diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h index dfdaede9139e..bf55bf2a5ee1 100644 --- a/include/linux/remoteproc.h +++ b/include/linux/remoteproc.h @@ -477,15 +477,15 @@ struct rproc { /** * struct rproc_subdev - subdevice tied to a remoteproc * @node: list node related to the rproc subdevs list - * @probe: probe function, called as the rproc is started - * @remove: remove function, called as the rproc is being stopped, the @crashed - * parameter indicates if this originates from the a recovery + * @start: start function, called after the rproc has been started + * @stop: stop function, called before the rproc is stopped; the @crashed + * parameter indicates if this originates from a recovery */ struct rproc_subdev { struct list_head node; - int (*probe)(struct rproc_subdev *subdev); - void (*remove)(struct rproc_subdev *subdev, bool crashed); + int (*start)(struct rproc_subdev *subdev); + void (*stop)(struct rproc_subdev *subdev, bool crashed); }; /* we currently support only two vrings per rvdev */ @@ -568,8 +568,8 @@ static inline struct rproc *vdev_to_rproc(struct virtio_device *vdev) void rproc_add_subdev(struct rproc *rproc, struct rproc_subdev *subdev, - int (*probe)(struct rproc_subdev *subdev), - void (*remove)(struct rproc_subdev *subdev, bool crashed)); + int (*start)(struct rproc_subdev *subdev), + void (*stop)(struct rproc_subdev *subdev, bool crashed)); void rproc_remove_subdev(struct rproc *rproc, struct rproc_subdev *subdev);