| Message ID | 20180627150150.23951-2-robert.jarzmik@free.fr (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
Hello, On Wed, 27 Jun 2018 17:01:50 +0200, Robert Jarzmik wrote: > The RTC controller is fed by an external fixed 32kHz clock. Yet the > driver wants to acquire this clock, even though it doesn't make any use > of it, ie. doesn't get the rate to make calculation. > > Therefore, use the exported 32.768kHz clock in the PXA clock tree to > make the driver happy and working. > > Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> > --- > Since v1: change the dummy clock by the actual 32.768kHz > --- > arch/arm/boot/dts/pxa25x.dtsi | 4 ++++ > arch/arm/boot/dts/pxa27x.dtsi | 4 ++++ > 2 files changed, 8 insertions(+) > > diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi > index 95d59be97213..78a413ea0e88 100644 > --- a/arch/arm/boot/dts/pxa25x.dtsi > +++ b/arch/arm/boot/dts/pxa25x.dtsi > @@ -80,6 +80,10 @@ > #pwm-cells = <1>; > clocks = <&clks CLK_PWM1>; > }; > + > + rtc@40900000 { > + clocks = <&clks CLK_OSC32k768>>; Double closing bracket, doesn't look good. Best regards, Thomas
Thomas Petazzoni <thomas.petazzoni@bootlin.com> writes: > Hello, >> + rtc@40900000 { >> + clocks = <&clks CLK_OSC32k768>>; > > Double closing bracket, doesn't look good. Rrrr you're right ... I swear this patchset is cursed ... Thanks for spotting that, I'll send a v4. Cheers.
diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi index 95d59be97213..78a413ea0e88 100644 --- a/arch/arm/boot/dts/pxa25x.dtsi +++ b/arch/arm/boot/dts/pxa25x.dtsi @@ -80,6 +80,10 @@ #pwm-cells = <1>; clocks = <&clks CLK_PWM1>; }; + + rtc@40900000 { + clocks = <&clks CLK_OSC32k768>>; + }; }; timer@40a00000 { diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index 747f750f675d..2ab6986433c8 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -113,6 +113,10 @@ status = "disabled"; }; + + rtc@40900000 { + clocks = <&clks CLK_OSC32k768>; + }; }; clocks {
The RTC controller is fed by an external fixed 32kHz clock. Yet the driver wants to acquire this clock, even though it doesn't make any use of it, ie. doesn't get the rate to make calculation. Therefore, use the exported 32.768kHz clock in the PXA clock tree to make the driver happy and working. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> --- Since v1: change the dummy clock by the actual 32.768kHz --- arch/arm/boot/dts/pxa25x.dtsi | 4 ++++ arch/arm/boot/dts/pxa27x.dtsi | 4 ++++ 2 files changed, 8 insertions(+)