Message ID | 20180629221907.3662-3-venu.busireddy@oracle.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Fri, Jun 29, 2018 at 3:19 PM, Venu Busireddy <venu.busireddy@oracle.com> wrote: > Add the "Vendor-Specific" capability to the Red Hat PCI bridge device > "pci-bridge", to contain the "Group Identifier" that will be used to pair > a virtio device with the passthrough device attached to that bridge. Also, > change the Device ID of the bridge to PCI_DEVICE_ID_REDHAT_BRIDGE_FAILOVER > to avoid confusion with bridges that don't have this capability. > > This capability is added to the bridge iff the "failover-group-id" > option is specified for the bridge. > > Signed-off-by: Venu Busireddy <venu.busireddy@oracle.com> > --- > hw/pci-bridge/pci_bridge_dev.c | 10 ++++++++++ > hw/pci/pci_bridge.c | 34 +++++++++++++++++++++++++++++++++ > include/hw/pci/pci.h | 35 +++++++++++++++++----------------- > include/hw/pci/pci_bridge.h | 2 ++ > 4 files changed, 64 insertions(+), 17 deletions(-) > > diff --git a/hw/pci-bridge/pci_bridge_dev.c b/hw/pci-bridge/pci_bridge_dev.c > index b2d861d216..d3879071a8 100644 > --- a/hw/pci-bridge/pci_bridge_dev.c > +++ b/hw/pci-bridge/pci_bridge_dev.c > @@ -71,6 +71,13 @@ static void pci_bridge_dev_realize(PCIDevice *dev, Error **errp) > bridge_dev->msi = ON_OFF_AUTO_OFF; > } > > + err = pci_bridge_vendor_init(dev, 0, PCI_DEVICE_ID_REDHAT_BRIDGE_FAILOVER, > + errp); > + if (err < 0) { > + error_append_hint(errp, "Can't init group ID, error %d\n", err); > + goto vendor_cap_err; > + } > + > err = slotid_cap_init(dev, 0, bridge_dev->chassis_nr, 0, errp); > if (err) { > goto slotid_error; > @@ -109,6 +116,7 @@ slotid_error: > if (shpc_present(dev)) { > shpc_cleanup(dev, &bridge_dev->bar); > } > +vendor_cap_err: > shpc_error: > pci_bridge_exitfn(dev); > } > @@ -162,6 +170,8 @@ static Property pci_bridge_dev_properties[] = { > ON_OFF_AUTO_AUTO), > DEFINE_PROP_BIT(PCI_BRIDGE_DEV_PROP_SHPC, PCIBridgeDev, flags, > PCI_BRIDGE_DEV_F_SHPC_REQ, true), > + DEFINE_PROP_UINT64(COMPAT_PROP_FAILOVER_GROUP_ID, > + PCIDevice, failover_group_id, ULLONG_MAX), > DEFINE_PROP_END_OF_LIST(), > }; > > diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c > index 40a39f57cb..68cc619c20 100644 > --- a/hw/pci/pci_bridge.c > +++ b/hw/pci/pci_bridge.c > @@ -40,6 +40,10 @@ > #define PCI_SSVID_SVID 4 > #define PCI_SSVID_SSID 6 > > +#define PCI_VENDOR_SIZEOF 12 > +#define PCI_VENDOR_CAP_LEN_OFFSET 2 > +#define PCI_VENDOR_GROUP_ID_OFFSET 4 > + > int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset, > uint16_t svid, uint16_t ssid, > Error **errp) > @@ -57,6 +61,36 @@ int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset, > return pos; > } > > +int pci_bridge_vendor_init(PCIDevice *d, uint8_t offset, > + uint16_t device_id, Error **errp) > +{ > + int pos; > + PCIDeviceClass *dc = PCI_DEVICE_GET_CLASS(d); > + > + if (d->failover_group_id == ULLONG_MAX) { > + return 0; > + } > + > + pos = pci_add_capability(d, PCI_CAP_ID_VNDR, offset, PCI_VENDOR_SIZEOF, > + errp); > + if (pos < 0) { > + return pos; > + } > + > + /* > + * Tweak the Device ID to avoid confusion > + * with bridges that don't have the group id capability. > + */ > + dc->device_id = device_id; > + pci_set_word(d->config + PCI_DEVICE_ID, device_id); > + > + pci_set_word(d->config + pos + PCI_VENDOR_CAP_LEN_OFFSET, > + PCI_VENDOR_SIZEOF); > + memcpy(d->config + pos + PCI_VENDOR_GROUP_ID_OFFSET, > + &d->failover_group_id, sizeof(uint64_t)); You should use pci_set_quad() on a 64bit value instead to avoid potential endianess issue. -Siwei > + return pos; > +} > + > /* Accessor function to get parent bridge device from pci bus. */ > PCIDevice *pci_bridge_get_device(PCIBus *bus) > { > diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h > index b59c3e7e38..bc38032761 100644 > --- a/include/hw/pci/pci.h > +++ b/include/hw/pci/pci.h > @@ -86,23 +86,24 @@ extern bool pci_available; > #define PCI_DEVICE_ID_VIRTIO_9P 0x1009 > #define PCI_DEVICE_ID_VIRTIO_VSOCK 0x1012 > > -#define PCI_VENDOR_ID_REDHAT 0x1b36 > -#define PCI_DEVICE_ID_REDHAT_BRIDGE 0x0001 > -#define PCI_DEVICE_ID_REDHAT_SERIAL 0x0002 > -#define PCI_DEVICE_ID_REDHAT_SERIAL2 0x0003 > -#define PCI_DEVICE_ID_REDHAT_SERIAL4 0x0004 > -#define PCI_DEVICE_ID_REDHAT_TEST 0x0005 > -#define PCI_DEVICE_ID_REDHAT_ROCKER 0x0006 > -#define PCI_DEVICE_ID_REDHAT_SDHCI 0x0007 > -#define PCI_DEVICE_ID_REDHAT_PCIE_HOST 0x0008 > -#define PCI_DEVICE_ID_REDHAT_PXB 0x0009 > -#define PCI_DEVICE_ID_REDHAT_BRIDGE_SEAT 0x000a > -#define PCI_DEVICE_ID_REDHAT_PXB_PCIE 0x000b > -#define PCI_DEVICE_ID_REDHAT_PCIE_RP 0x000c > -#define PCI_DEVICE_ID_REDHAT_XHCI 0x000d > -#define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE 0x000e > -#define PCI_DEVICE_ID_REDHAT_MDPY 0x000f > -#define PCI_DEVICE_ID_REDHAT_QXL 0x0100 > +#define PCI_VENDOR_ID_REDHAT 0x1b36 > +#define PCI_DEVICE_ID_REDHAT_BRIDGE 0x0001 > +#define PCI_DEVICE_ID_REDHAT_SERIAL 0x0002 > +#define PCI_DEVICE_ID_REDHAT_SERIAL2 0x0003 > +#define PCI_DEVICE_ID_REDHAT_SERIAL4 0x0004 > +#define PCI_DEVICE_ID_REDHAT_TEST 0x0005 > +#define PCI_DEVICE_ID_REDHAT_ROCKER 0x0006 > +#define PCI_DEVICE_ID_REDHAT_SDHCI 0x0007 > +#define PCI_DEVICE_ID_REDHAT_PCIE_HOST 0x0008 > +#define PCI_DEVICE_ID_REDHAT_PXB 0x0009 > +#define PCI_DEVICE_ID_REDHAT_BRIDGE_SEAT 0x000a > +#define PCI_DEVICE_ID_REDHAT_PXB_PCIE 0x000b > +#define PCI_DEVICE_ID_REDHAT_PCIE_RP 0x000c > +#define PCI_DEVICE_ID_REDHAT_XHCI 0x000d > +#define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE 0x000e > +#define PCI_DEVICE_ID_REDHAT_MDPY 0x000f > +#define PCI_DEVICE_ID_REDHAT_BRIDGE_FAILOVER 0x0010 > +#define PCI_DEVICE_ID_REDHAT_QXL 0x0100 > > #define FMT_PCIBUS PRIx64 > > diff --git a/include/hw/pci/pci_bridge.h b/include/hw/pci/pci_bridge.h > index 0347da52d2..aa471ec5a4 100644 > --- a/include/hw/pci/pci_bridge.h > +++ b/include/hw/pci/pci_bridge.h > @@ -83,6 +83,8 @@ struct PCIBridge { > int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset, > uint16_t svid, uint16_t ssid, > Error **errp); > +int pci_bridge_vendor_init(PCIDevice *dev, uint8_t offset, > + uint16_t device_id, Error **errp); > > PCIDevice *pci_bridge_get_device(PCIBus *bus); > PCIBus *pci_bridge_get_sec_bus(PCIBridge *br); > > --------------------------------------------------------------------- > To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org > For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org >
diff --git a/hw/pci-bridge/pci_bridge_dev.c b/hw/pci-bridge/pci_bridge_dev.c index b2d861d216..d3879071a8 100644 --- a/hw/pci-bridge/pci_bridge_dev.c +++ b/hw/pci-bridge/pci_bridge_dev.c @@ -71,6 +71,13 @@ static void pci_bridge_dev_realize(PCIDevice *dev, Error **errp) bridge_dev->msi = ON_OFF_AUTO_OFF; } + err = pci_bridge_vendor_init(dev, 0, PCI_DEVICE_ID_REDHAT_BRIDGE_FAILOVER, + errp); + if (err < 0) { + error_append_hint(errp, "Can't init group ID, error %d\n", err); + goto vendor_cap_err; + } + err = slotid_cap_init(dev, 0, bridge_dev->chassis_nr, 0, errp); if (err) { goto slotid_error; @@ -109,6 +116,7 @@ slotid_error: if (shpc_present(dev)) { shpc_cleanup(dev, &bridge_dev->bar); } +vendor_cap_err: shpc_error: pci_bridge_exitfn(dev); } @@ -162,6 +170,8 @@ static Property pci_bridge_dev_properties[] = { ON_OFF_AUTO_AUTO), DEFINE_PROP_BIT(PCI_BRIDGE_DEV_PROP_SHPC, PCIBridgeDev, flags, PCI_BRIDGE_DEV_F_SHPC_REQ, true), + DEFINE_PROP_UINT64(COMPAT_PROP_FAILOVER_GROUP_ID, + PCIDevice, failover_group_id, ULLONG_MAX), DEFINE_PROP_END_OF_LIST(), }; diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c index 40a39f57cb..68cc619c20 100644 --- a/hw/pci/pci_bridge.c +++ b/hw/pci/pci_bridge.c @@ -40,6 +40,10 @@ #define PCI_SSVID_SVID 4 #define PCI_SSVID_SSID 6 +#define PCI_VENDOR_SIZEOF 12 +#define PCI_VENDOR_CAP_LEN_OFFSET 2 +#define PCI_VENDOR_GROUP_ID_OFFSET 4 + int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset, uint16_t svid, uint16_t ssid, Error **errp) @@ -57,6 +61,36 @@ int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset, return pos; } +int pci_bridge_vendor_init(PCIDevice *d, uint8_t offset, + uint16_t device_id, Error **errp) +{ + int pos; + PCIDeviceClass *dc = PCI_DEVICE_GET_CLASS(d); + + if (d->failover_group_id == ULLONG_MAX) { + return 0; + } + + pos = pci_add_capability(d, PCI_CAP_ID_VNDR, offset, PCI_VENDOR_SIZEOF, + errp); + if (pos < 0) { + return pos; + } + + /* + * Tweak the Device ID to avoid confusion + * with bridges that don't have the group id capability. + */ + dc->device_id = device_id; + pci_set_word(d->config + PCI_DEVICE_ID, device_id); + + pci_set_word(d->config + pos + PCI_VENDOR_CAP_LEN_OFFSET, + PCI_VENDOR_SIZEOF); + memcpy(d->config + pos + PCI_VENDOR_GROUP_ID_OFFSET, + &d->failover_group_id, sizeof(uint64_t)); + return pos; +} + /* Accessor function to get parent bridge device from pci bus. */ PCIDevice *pci_bridge_get_device(PCIBus *bus) { diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h index b59c3e7e38..bc38032761 100644 --- a/include/hw/pci/pci.h +++ b/include/hw/pci/pci.h @@ -86,23 +86,24 @@ extern bool pci_available; #define PCI_DEVICE_ID_VIRTIO_9P 0x1009 #define PCI_DEVICE_ID_VIRTIO_VSOCK 0x1012 -#define PCI_VENDOR_ID_REDHAT 0x1b36 -#define PCI_DEVICE_ID_REDHAT_BRIDGE 0x0001 -#define PCI_DEVICE_ID_REDHAT_SERIAL 0x0002 -#define PCI_DEVICE_ID_REDHAT_SERIAL2 0x0003 -#define PCI_DEVICE_ID_REDHAT_SERIAL4 0x0004 -#define PCI_DEVICE_ID_REDHAT_TEST 0x0005 -#define PCI_DEVICE_ID_REDHAT_ROCKER 0x0006 -#define PCI_DEVICE_ID_REDHAT_SDHCI 0x0007 -#define PCI_DEVICE_ID_REDHAT_PCIE_HOST 0x0008 -#define PCI_DEVICE_ID_REDHAT_PXB 0x0009 -#define PCI_DEVICE_ID_REDHAT_BRIDGE_SEAT 0x000a -#define PCI_DEVICE_ID_REDHAT_PXB_PCIE 0x000b -#define PCI_DEVICE_ID_REDHAT_PCIE_RP 0x000c -#define PCI_DEVICE_ID_REDHAT_XHCI 0x000d -#define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE 0x000e -#define PCI_DEVICE_ID_REDHAT_MDPY 0x000f -#define PCI_DEVICE_ID_REDHAT_QXL 0x0100 +#define PCI_VENDOR_ID_REDHAT 0x1b36 +#define PCI_DEVICE_ID_REDHAT_BRIDGE 0x0001 +#define PCI_DEVICE_ID_REDHAT_SERIAL 0x0002 +#define PCI_DEVICE_ID_REDHAT_SERIAL2 0x0003 +#define PCI_DEVICE_ID_REDHAT_SERIAL4 0x0004 +#define PCI_DEVICE_ID_REDHAT_TEST 0x0005 +#define PCI_DEVICE_ID_REDHAT_ROCKER 0x0006 +#define PCI_DEVICE_ID_REDHAT_SDHCI 0x0007 +#define PCI_DEVICE_ID_REDHAT_PCIE_HOST 0x0008 +#define PCI_DEVICE_ID_REDHAT_PXB 0x0009 +#define PCI_DEVICE_ID_REDHAT_BRIDGE_SEAT 0x000a +#define PCI_DEVICE_ID_REDHAT_PXB_PCIE 0x000b +#define PCI_DEVICE_ID_REDHAT_PCIE_RP 0x000c +#define PCI_DEVICE_ID_REDHAT_XHCI 0x000d +#define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE 0x000e +#define PCI_DEVICE_ID_REDHAT_MDPY 0x000f +#define PCI_DEVICE_ID_REDHAT_BRIDGE_FAILOVER 0x0010 +#define PCI_DEVICE_ID_REDHAT_QXL 0x0100 #define FMT_PCIBUS PRIx64 diff --git a/include/hw/pci/pci_bridge.h b/include/hw/pci/pci_bridge.h index 0347da52d2..aa471ec5a4 100644 --- a/include/hw/pci/pci_bridge.h +++ b/include/hw/pci/pci_bridge.h @@ -83,6 +83,8 @@ struct PCIBridge { int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset, uint16_t svid, uint16_t ssid, Error **errp); +int pci_bridge_vendor_init(PCIDevice *dev, uint8_t offset, + uint16_t device_id, Error **errp); PCIDevice *pci_bridge_get_device(PCIBus *bus); PCIBus *pci_bridge_get_sec_bus(PCIBridge *br);
Add the "Vendor-Specific" capability to the Red Hat PCI bridge device "pci-bridge", to contain the "Group Identifier" that will be used to pair a virtio device with the passthrough device attached to that bridge. Also, change the Device ID of the bridge to PCI_DEVICE_ID_REDHAT_BRIDGE_FAILOVER to avoid confusion with bridges that don't have this capability. This capability is added to the bridge iff the "failover-group-id" option is specified for the bridge. Signed-off-by: Venu Busireddy <venu.busireddy@oracle.com> --- hw/pci-bridge/pci_bridge_dev.c | 10 ++++++++++ hw/pci/pci_bridge.c | 34 +++++++++++++++++++++++++++++++++ include/hw/pci/pci.h | 35 +++++++++++++++++----------------- include/hw/pci/pci_bridge.h | 2 ++ 4 files changed, 64 insertions(+), 17 deletions(-)