| Message ID | 20180703145716.31860-3-yixun.lan@amlogic.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On Tue, 3 Jul 2018 14:57:15 +0000 Yixun Lan <yixun.lan@amlogic.com> wrote: > Add two clock bindings IDs which provided by the EMMC clock controller, > These two clocks will be used by EMMC or NAND driver. > > Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> > --- > include/dt-bindings/clock/emmc-clkc.h | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > create mode 100644 include/dt-bindings/clock/emmc-clkc.h > > diff --git a/include/dt-bindings/clock/emmc-clkc.h b/include/dt-bindings/clock/emmc-clkc.h > new file mode 100644 > index 000000000000..d9972c400e58 > --- /dev/null > +++ b/include/dt-bindings/clock/emmc-clkc.h > @@ -0,0 +1,14 @@ > +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ > +/* > + * Meson EMMC sub clock tree IDs > + * > + * Copyright (c) 2018 Amlogic, Inc. All rights reserved. > + */ > + > +#ifndef __EMMC_CLKC_H > +#define __EMMC_CLKC_H > + > +#define CLKID_EMMC_C_MUX 0 Looks like the MUX clk is the parent of the DIV one, and I guess the clk driver is able to select the best parent+div pair for a requested rate. Do you really need to expose the MUX to users? > +#define CLKID_EMMC_C_DIV 1 > + > +#endif
Hi Broris thanks for your quick response, and see my comments below On 07/03/18 15:21, Boris Brezillon wrote: > On Tue, 3 Jul 2018 14:57:15 +0000 > Yixun Lan <yixun.lan@amlogic.com> wrote: > >> Add two clock bindings IDs which provided by the EMMC clock controller, >> These two clocks will be used by EMMC or NAND driver. >> >> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> >> --- >> include/dt-bindings/clock/emmc-clkc.h | 14 ++++++++++++++ >> 1 file changed, 14 insertions(+) >> create mode 100644 include/dt-bindings/clock/emmc-clkc.h >> >> diff --git a/include/dt-bindings/clock/emmc-clkc.h b/include/dt-bindings/clock/emmc-clkc.h >> new file mode 100644 >> index 000000000000..d9972c400e58 >> --- /dev/null >> +++ b/include/dt-bindings/clock/emmc-clkc.h >> @@ -0,0 +1,14 @@ >> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >> +/* >> + * Meson EMMC sub clock tree IDs >> + * >> + * Copyright (c) 2018 Amlogic, Inc. All rights reserved. >> + */ >> + >> +#ifndef __EMMC_CLKC_H >> +#define __EMMC_CLKC_H >> + >> +#define CLKID_EMMC_C_MUX 0 > > Looks like the MUX clk is the parent of the DIV one, and I guess the clk > driver is able to select the best parent+div pair for a requested rate. > Do you really need to expose the MUX to users? > Yes, It's true, the mux is parent of the div clock. while testing for the NAND driver, I find it's kind of loose about the parent of the clock, so selecting the div (and let CCF decide freely) is actually works fine but for the EMMC driver, especially when running at high clock, it's kind of picky about the parent of the clock, so the driver may want to manually choose the parent of the mux clock (example fclk_div2 here). That's why I'm exporting this clock ID. >> +#define CLKID_EMMC_C_DIV 1 >> + >> +#endif > > . >
On Tue, 2018-07-03 at 15:36 +0800, Yixun Lan wrote: > Hi Broris > > thanks for your quick response, and see my comments below > > On 07/03/18 15:21, Boris Brezillon wrote: > > On Tue, 3 Jul 2018 14:57:15 +0000 > > Yixun Lan <yixun.lan@amlogic.com> wrote: > > > > > Add two clock bindings IDs which provided by the EMMC clock controller, > > > These two clocks will be used by EMMC or NAND driver. > > > > > > Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> > > > --- > > > include/dt-bindings/clock/emmc-clkc.h | 14 ++++++++++++++ > > > 1 file changed, 14 insertions(+) > > > create mode 100644 include/dt-bindings/clock/emmc-clkc.h > > > > > > diff --git a/include/dt-bindings/clock/emmc-clkc.h b/include/dt-bindings/clock/emmc-clkc.h > > > new file mode 100644 > > > index 000000000000..d9972c400e58 > > > --- /dev/null > > > +++ b/include/dt-bindings/clock/emmc-clkc.h > > > @@ -0,0 +1,14 @@ > > > +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ > > > +/* > > > + * Meson EMMC sub clock tree IDs > > > + * > > > + * Copyright (c) 2018 Amlogic, Inc. All rights reserved. > > > + */ > > > + > > > +#ifndef __EMMC_CLKC_H > > > +#define __EMMC_CLKC_H > > > + > > > +#define CLKID_EMMC_C_MUX 0 > > > > Looks like the MUX clk is the parent of the DIV one, and I guess the clk > > driver is able to select the best parent+div pair for a requested rate. > > Do you really need to expose the MUX to users? > > > > Yes, It's true, the mux is parent of the div clock. > > while testing for the NAND driver, I find it's kind of loose about the > parent of the clock, so selecting the div (and let CCF decide freely) is > actually works fine > > but for the EMMC driver, especially when running at high clock, it's > kind of picky about the parent of the clock, It would be nice to get an explanation about this behavior. it seems that even of the rate provided by CLKID_SD_EMMC_X_CLK0 (main clock controller) is correct, the eMMC cannot reliably tune with it. Could you elaborate on this ? > so the driver may want to > manually choose the parent of the mux clock (example fclk_div2 here). > That's why I'm exporting this clock ID. ATM the EMMC driver will not use this provider. If this is the only reason, it could be done later. Is the NAND driver "picky" as well ? > > > > > +#define CLKID_EMMC_C_DIV 1 > > > + > > > +#endif > > > > . > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-clk" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Jerome: On 07/03/18 16:09, Jerome Brunet wrote: > On Tue, 2018-07-03 at 15:36 +0800, Yixun Lan wrote: >> Hi Broris >> >> thanks for your quick response, and see my comments below >> >> On 07/03/18 15:21, Boris Brezillon wrote: >>> On Tue, 3 Jul 2018 14:57:15 +0000 >>> Yixun Lan <yixun.lan@amlogic.com> wrote: >>> >>>> Add two clock bindings IDs which provided by the EMMC clock controller, >>>> These two clocks will be used by EMMC or NAND driver. >>>> >>>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> >>>> --- >>>> include/dt-bindings/clock/emmc-clkc.h | 14 ++++++++++++++ >>>> 1 file changed, 14 insertions(+) >>>> create mode 100644 include/dt-bindings/clock/emmc-clkc.h >>>> >>>> diff --git a/include/dt-bindings/clock/emmc-clkc.h b/include/dt-bindings/clock/emmc-clkc.h >>>> new file mode 100644 >>>> index 000000000000..d9972c400e58 >>>> --- /dev/null >>>> +++ b/include/dt-bindings/clock/emmc-clkc.h >>>> @@ -0,0 +1,14 @@ >>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>> +/* >>>> + * Meson EMMC sub clock tree IDs >>>> + * >>>> + * Copyright (c) 2018 Amlogic, Inc. All rights reserved. >>>> + */ >>>> + >>>> +#ifndef __EMMC_CLKC_H >>>> +#define __EMMC_CLKC_H >>>> + >>>> +#define CLKID_EMMC_C_MUX 0 >>> >>> Looks like the MUX clk is the parent of the DIV one, and I guess the clk >>> driver is able to select the best parent+div pair for a requested rate. >>> Do you really need to expose the MUX to users? >>> >> >> Yes, It's true, the mux is parent of the div clock. >> >> while testing for the NAND driver, I find it's kind of loose about the >> parent of the clock, so selecting the div (and let CCF decide freely) is >> actually works fine >> >> but for the EMMC driver, especially when running at high clock, it's >> kind of picky about the parent of the clock, > > It would be nice to get an explanation about this behavior. > it seems that even of the rate provided by CLKID_SD_EMMC_X_CLK0 (main clock > controller) is correct, the eMMC cannot reliably tune with it. > > Could you elaborate on this ? > It's during my own test in AXG platform, I found clock path a) fclk_div2 -> sd_emmc_c_clk0_sel -> sd_emmc_c_clk0_div -> sd_emmc_c_clk0 -> sd_emmc_c_mux -> sd_emmc_c_div b) fclk_div2 -> sd_emmc_c_mux -> sd_emmc_c_div path a) doesn't work in EMMC driver, even both clock parent of them from the same fclk_div2 source. sd_emmc_c_mux -> sd_emmc_c_div is the clock from the EMMC register base. I believe it's ASIC design issue >> so the driver may want to >> manually choose the parent of the mux clock (example fclk_div2 here). >> That's why I'm exporting this clock ID. > > ATM the EMMC driver will not use this provider. If this is the only reason, it > could be done later. > sure, I'm fine with this.. we could certainly adjust it later. I will fix this in next patch version > Is the NAND driver "picky" as well ? > No, since the NAND is running at much low clock speed, and during my tests, it works fine with various clock parent >> >> >>>> +#define CLKID_EMMC_C_DIV 1 >>>> + >>>> +#endif >>> >>> . >>> >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-clk" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > . >
On Tue, 2018-07-03 at 17:56 +0800, Yixun Lan wrote: > > > Yes, It's true, the mux is parent of the div clock. > > > > > > while testing for the NAND driver, I find it's kind of loose about the > > > parent of the clock, so selecting the div (and let CCF decide freely) is > > > actually works fine > > > > > > but for the EMMC driver, especially when running at high clock, it's > > > kind of picky about the parent of the clock, > > > > It would be nice to get an explanation about this behavior. > > it seems that even of the rate provided by CLKID_SD_EMMC_X_CLK0 (main clock > > controller) is correct, the eMMC cannot reliably tune with it. > > > > Could you elaborate on this ? > > > > It's during my own test in AXG platform, I found clock path > a) fclk_div2 -> sd_emmc_c_clk0_sel -> sd_emmc_c_clk0_div -> > sd_emmc_c_clk0 -> sd_emmc_c_mux -> sd_emmc_c_div > > b) fclk_div2 -> sd_emmc_c_mux -> sd_emmc_c_div > > path a) doesn't work in EMMC driver, even both clock parent of them from > the same fclk_div2 source. > > sd_emmc_c_mux -> sd_emmc_c_div is the clock from the EMMC register base. > I believe it's ASIC design issue yes Yixun, I did the same test. What I meant with this question is: could you confirm there a problem with this clock, and what it is exactly so we can adjust the clock as necessary. If FDIV2 entry to this clock is broken, maybe it should be removed.
diff --git a/include/dt-bindings/clock/emmc-clkc.h b/include/dt-bindings/clock/emmc-clkc.h new file mode 100644 index 000000000000..d9972c400e58 --- /dev/null +++ b/include/dt-bindings/clock/emmc-clkc.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Meson EMMC sub clock tree IDs + * + * Copyright (c) 2018 Amlogic, Inc. All rights reserved. + */ + +#ifndef __EMMC_CLKC_H +#define __EMMC_CLKC_H + +#define CLKID_EMMC_C_MUX 0 +#define CLKID_EMMC_C_DIV 1 + +#endif
Add two clock bindings IDs which provided by the EMMC clock controller, These two clocks will be used by EMMC or NAND driver. Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> --- include/dt-bindings/clock/emmc-clkc.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 include/dt-bindings/clock/emmc-clkc.h