| Message ID | 87cc68c82c3c95e82797e0ce3d401a4f1d6daf25.1530776326.git.matti.vaittinen@fi.rohmeurope.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, 05 Jul 2018, Matti Vaittinen wrote: > Document devicetree bindings for ROHM BD71837 PMIC MFD. > > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> > Reviewed-by: Rob Herring <robh@kernel.org> > --- > .../devicetree/bindings/mfd/rohm,bd71837-pmic.txt | 67 ++++++++++++++++++++++ > 1 file changed, 67 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt > > diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt > new file mode 100644 > index 000000000000..67f2616288d9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt > @@ -0,0 +1,67 @@ > +* ROHM BD71837 Power Management Integrated Circuit bindings > + > +BD71837MWV is a programmable Power Management IC for powering single-core, > +dual-core, and quad-core SoC’s such as NXP-i.MX 8M. It is optimized for Nit: s/SOC's/SOCs/ > +low BOM cost and compact solution footprint. It integrates 8 Buck > +egulators and 7 LDO’s to provide all the power rails required by the SoC and Nit: s/LDO's/LDOs/ > +the commonly used peripherals. > + > +Datasheet for PMIC is available at: > +https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e > + > +Required properties: > + - compatible : Should be "rohm,bd71837". > + - reg : I2C slave address. > + - interrupt-parent : Phandle to the parent interrupt controller. > + - interrupts : The interrupt line the device is connected to. > + - clocks : The parent clock connected to PMIC. If this is missng s/missng/missing/ > + 32768 KHz clock is assumed. > + - #clock-cells : Should be 0 > + - regulators: : List of child nodes that specify the regulators By your convention, the bottom two entries are missing '.'s. > + Please see ../regulator/rohm,bd71837-regulator.txt > + > +Optional properties: > +- clock-output-names : Should contain name for output clock. > + > +Example: > + > + /* external oscillator node */ Uppercase character to start a sentence. > + osc: oscillator { > + compatible = "fixed-clock"; > + #clock-cells = <1>; > + clock-frequency = <32768>; > + clock-output-names = "osc"; > + }; > + > + /* PMIC node */ Is this comment really necessary? The node is called "pmic". > + pmic: pmic@4b { > + compatible = "rohm,bd71837"; > + reg = <0x4b>; > + interrupt-parent = <&gpio1>; > + interrupts = <29 GPIO_ACTIVE_LOW>; > + interrupt-names = "irq"; > + #clock-cells = <0>; > + clocks = <&osc 0>; > + clock-output-names = "bd71837-32k-out"; > + > + regulators { > + buck1: BUCK1 { > + regulator-name = "buck1"; > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1300000>; > + regulator-boot-on; > + regulator-ramp-delay = <1250>; > + }; > + /* ... */ > + }; > + }; > + > + /* Clock consumer node */ > + > + foo@0 { > + compatible = "bar,foo"; > + /* ... */ No need for this line. Additional properties are always expected. > + clock-names = "my-clock"; > + clocks = <&pmic>; > + }; Do you have a real example to give?
And thanks again Lee! On Thu, Jul 05, 2018 at 10:24:44AM +0100, Lee Jones wrote: > On Thu, 05 Jul 2018, Matti Vaittinen wrote: > > > Document devicetree bindings for ROHM BD71837 PMIC MFD. > > > > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> > > Reviewed-by: Rob Herring <robh@kernel.org> > > --- > > .../devicetree/bindings/mfd/rohm,bd71837-pmic.txt | 67 ++++++++++++++++++++++ > > 1 file changed, 67 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt > > > > diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt > > new file mode 100644 > > index 000000000000..67f2616288d9 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt > > @@ -0,0 +1,67 @@ > > +* ROHM BD71837 Power Management Integrated Circuit bindings > > + > > +BD71837MWV is a programmable Power Management IC for powering single-core, > > +dual-core, and quad-core SoC’s such as NXP-i.MX 8M. It is optimized for > > Nit: s/SOC's/SOCs/ I'll change this. > > +low BOM cost and compact solution footprint. It integrates 8 Buck > > +egulators and 7 LDO’s to provide all the power rails required by the SoC and > > Nit: s/LDO's/LDOs/ I'll change this. > > +the commonly used peripherals. > > + > > +Datasheet for PMIC is available at: > > +https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e > > + > > +Required properties: > > + - compatible : Should be "rohm,bd71837". > > + - reg : I2C slave address. > > + - interrupt-parent : Phandle to the parent interrupt controller. > > + - interrupts : The interrupt line the device is connected to. > > + - clocks : The parent clock connected to PMIC. If this is missng > > s/missng/missing/ I'll change this. > > + 32768 KHz clock is assumed. > > + - #clock-cells : Should be 0 > > + - regulators: : List of child nodes that specify the regulators > > By your convention, the bottom two entries are missing '.'s. I'll change this. > > + Please see ../regulator/rohm,bd71837-regulator.txt > > + > > +Optional properties: > > +- clock-output-names : Should contain name for output clock. > > + > > +Example: > > + > > + /* external oscillator node */ > > Uppercase character to start a sentence. I'll change this. > > + osc: oscillator { > > + compatible = "fixed-clock"; > > + #clock-cells = <1>; > > + clock-frequency = <32768>; > > + clock-output-names = "osc"; > > + }; > > + > > + /* PMIC node */ > > Is this comment really necessary? The node is called "pmic". I'll remove this. > > + pmic: pmic@4b { > > + compatible = "rohm,bd71837"; > > + reg = <0x4b>; > > + interrupt-parent = <&gpio1>; > > + interrupts = <29 GPIO_ACTIVE_LOW>; > > + interrupt-names = "irq"; > > + #clock-cells = <0>; > > + clocks = <&osc 0>; > > + clock-output-names = "bd71837-32k-out"; > > + > > + regulators { > > + buck1: BUCK1 { > > + regulator-name = "buck1"; > > + regulator-min-microvolt = <700000>; > > + regulator-max-microvolt = <1300000>; > > + regulator-boot-on; > > + regulator-ramp-delay = <1250>; > > + }; > > + /* ... */ > > + }; > > + }; > > + > > + /* Clock consumer node */ > > + > > + foo@0 { > > + compatible = "bar,foo"; > > + /* ... */ > > No need for this line. Additional properties are always expected. I'll remove this. > > + clock-names = "my-clock"; > > + clocks = <&pmic>; > > + }; > > Do you have a real example to give? For clock consumer? Sorry, no I don't. Br, Matti Vaittinen > -- > Lee Jones [李琼斯] > Linaro Services Technical Lead > Linaro.org │ Open source software for ARM SoCs > Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, 05 Jul 2018, Matti Vaittinen wrote: > On Thu, Jul 05, 2018 at 10:24:44AM +0100, Lee Jones wrote: > > On Thu, 05 Jul 2018, Matti Vaittinen wrote: > > > > > Document devicetree bindings for ROHM BD71837 PMIC MFD. > > > > > > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> > > > Reviewed-by: Rob Herring <robh@kernel.org> > > > --- > > > .../devicetree/bindings/mfd/rohm,bd71837-pmic.txt | 67 ++++++++++++++++++++++ > > > 1 file changed, 67 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt > > > + clock-names = "my-clock"; > > > + clocks = <&pmic>; > > > + }; > > > > Do you have a real example to give? > > For clock consumer? Sorry, no I don't. Might be better to drop it for the time being then.
On Thu, Jul 05, 2018 at 11:49:19AM +0100, Lee Jones wrote: > On Thu, 05 Jul 2018, Matti Vaittinen wrote: > > On Thu, Jul 05, 2018 at 10:24:44AM +0100, Lee Jones wrote: > > > On Thu, 05 Jul 2018, Matti Vaittinen wrote: > > > > > > > Document devicetree bindings for ROHM BD71837 PMIC MFD. > > > > > > > > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> > > > > Reviewed-by: Rob Herring <robh@kernel.org> > > > > --- > > > > .../devicetree/bindings/mfd/rohm,bd71837-pmic.txt | 67 ++++++++++++++++++++++ > > > > 1 file changed, 67 insertions(+) > > > > create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt > > > > + clock-names = "my-clock"; > > > > + clocks = <&pmic>; > > > > + }; > > > > > > Do you have a real example to give? > > > > For clock consumer? Sorry, no I don't. > > Might be better to drop it for the time being then. I have tested the clk driver using this dummy consumer. So in a sense it "works" and can be used as an example on how to write a real clock consumer node. Thus I see some value in this example node - even if it does not match to any real world HW. If I had to use the clk from this PMIC and write HW description I would appreciate this dummy exaple. I can drop it if you insist - but I would at least like to hear what is the downside on having it here? Best regards, Matti Vaittinen -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, 05 Jul 2018, Matti Vaittinen wrote: > On Thu, Jul 05, 2018 at 11:49:19AM +0100, Lee Jones wrote: > > On Thu, 05 Jul 2018, Matti Vaittinen wrote: > > > On Thu, Jul 05, 2018 at 10:24:44AM +0100, Lee Jones wrote: > > > > On Thu, 05 Jul 2018, Matti Vaittinen wrote: > > > > > > > > > Document devicetree bindings for ROHM BD71837 PMIC MFD. > > > > > > > > > > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> > > > > > Reviewed-by: Rob Herring <robh@kernel.org> > > > > > --- > > > > > .../devicetree/bindings/mfd/rohm,bd71837-pmic.txt | 67 ++++++++++++++++++++++ > > > > > 1 file changed, 67 insertions(+) > > > > > create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt > > > > > + clock-names = "my-clock"; > > > > > + clocks = <&pmic>; > > > > > + }; > > > > > > > > Do you have a real example to give? > > > > > > For clock consumer? Sorry, no I don't. > > > > Might be better to drop it for the time being then. > > I have tested the clk driver using this dummy consumer. So in a sense it > "works" and can be used as an example on how to write a real clock > consumer node. Thus I see some value in this example node - even if it > does not match to any real world HW. If I had to use the clk from this > PMIC and write HW description I would appreciate this dummy exaple. I > can drop it if you insist - but I would at least like to hear what is > the downside on having it here? My suggestion then would be to make it look as authentic as possible. It is only an example, so it doesn't *really* matter, but the current foo,bar one just looks a bit crumby.
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt new file mode 100644 index 000000000000..67f2616288d9 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt @@ -0,0 +1,67 @@ +* ROHM BD71837 Power Management Integrated Circuit bindings + +BD71837MWV is a programmable Power Management IC for powering single-core, +dual-core, and quad-core SoC’s such as NXP-i.MX 8M. It is optimized for +low BOM cost and compact solution footprint. It integrates 8 Buck +egulators and 7 LDO’s to provide all the power rails required by the SoC and +the commonly used peripherals. + +Datasheet for PMIC is available at: +https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e + +Required properties: + - compatible : Should be "rohm,bd71837". + - reg : I2C slave address. + - interrupt-parent : Phandle to the parent interrupt controller. + - interrupts : The interrupt line the device is connected to. + - clocks : The parent clock connected to PMIC. If this is missng + 32768 KHz clock is assumed. + - #clock-cells : Should be 0 + - regulators: : List of child nodes that specify the regulators + Please see ../regulator/rohm,bd71837-regulator.txt + +Optional properties: +- clock-output-names : Should contain name for output clock. + +Example: + + /* external oscillator node */ + osc: oscillator { + compatible = "fixed-clock"; + #clock-cells = <1>; + clock-frequency = <32768>; + clock-output-names = "osc"; + }; + + /* PMIC node */ + + pmic: pmic@4b { + compatible = "rohm,bd71837"; + reg = <0x4b>; + interrupt-parent = <&gpio1>; + interrupts = <29 GPIO_ACTIVE_LOW>; + interrupt-names = "irq"; + #clock-cells = <0>; + clocks = <&osc 0>; + clock-output-names = "bd71837-32k-out"; + + regulators { + buck1: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-ramp-delay = <1250>; + }; + /* ... */ + }; + }; + + /* Clock consumer node */ + + foo@0 { + compatible = "bar,foo"; + /* ... */ + clock-names = "my-clock"; + clocks = <&pmic>; + };