Message ID | 1529070694-21088-5-git-send-email-ayan.halder@arm.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Fri, Jun 15, 2018 at 02:51:34PM +0100, Ayan Kumar Halder wrote: > On planes which support AFBC, expose an AFBC modifier for use with BGR888. > > Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com> > Reviewed-by: Brian Starkey <brian.starkey@arm.com> > > Change-Id: I4739ff55c0f6d5715b268cb3947ed133a9ee7c2e Please remove the Change-Id > --- > drivers/gpu/drm/arm/malidp_drv.c | 1 + > drivers/gpu/drm/arm/malidp_planes.c | 46 +++++++++++++++++++++++++++++++++++-- > 2 files changed, 45 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/arm/malidp_drv.c b/drivers/gpu/drm/arm/malidp_drv.c > index 7b6a848..7bcd679 100644 > --- a/drivers/gpu/drm/arm/malidp_drv.c > +++ b/drivers/gpu/drm/arm/malidp_drv.c > @@ -392,6 +392,7 @@ static int malidp_init(struct drm_device *drm) > drm->mode_config.max_height = hwdev->max_line_size; > drm->mode_config.funcs = &malidp_mode_config_funcs; > drm->mode_config.helper_private = &malidp_mode_config_helpers; > + drm->mode_config.allow_fb_modifiers = true; > > ret = malidp_crtc_init(drm); > if (ret) { > diff --git a/drivers/gpu/drm/arm/malidp_planes.c b/drivers/gpu/drm/arm/malidp_planes.c > index 3950504..55c9a1f6 100644 > --- a/drivers/gpu/drm/arm/malidp_planes.c > +++ b/drivers/gpu/drm/arm/malidp_planes.c > @@ -124,6 +124,35 @@ static void malidp_plane_atomic_print_state(struct drm_printer *p, > drm_printf(p, "\tn_planes=%u\n", ms->n_planes); > } > > +static bool malidp_format_mod_supported(struct drm_plane *plane, > + u32 format, u64 modifier) > +{ > + if (WARN_ON(modifier == DRM_FORMAT_MOD_INVALID)) > + return false; > + > + /* All the pixel formats are supported without any modifier */ > + if (modifier == DRM_FORMAT_MOD_LINEAR) > + return true; > + > + if ((modifier >> 56) != DRM_FORMAT_MOD_VENDOR_ARM) > + return false; > + > + if (modifier & > + ~DRM_FORMAT_MOD_ARM_AFBC(AFBC_MOD_VALID_BITS)) { > + DRM_ERROR("Unsupported modifiers\n"); I don't think we should polute the kernel log buffers with this. Maybe a DRM_DEBUG() if you really want to get some notification? With those changes added: Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Best regards, Liviu > + return false; > + } > + > + switch (modifier) { > + case DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 | > + AFBC_FORMAT_MOD_YTR | > + AFBC_FORMAT_MOD_SPARSE): > + if (format == DRM_FORMAT_BGR888) > + return true; > + } > + return false; > +} > + > static const struct drm_plane_funcs malidp_de_plane_funcs = { > .update_plane = drm_atomic_helper_update_plane, > .disable_plane = drm_atomic_helper_disable_plane, > @@ -132,6 +161,7 @@ static const struct drm_plane_funcs malidp_de_plane_funcs = { > .atomic_duplicate_state = malidp_duplicate_plane_state, > .atomic_destroy_state = malidp_destroy_plane_state, > .atomic_print_state = malidp_plane_atomic_print_state, > + .format_mod_supported = malidp_format_mod_supported, > }; > > static int malidp_se_check_scaling(struct malidp_plane *mp, > @@ -524,6 +554,13 @@ int malidp_de_planes_init(struct drm_device *drm) > u32 *formats; > int ret, i, j, n; > > + static const u64 modifiers[] = { > + DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 | > + AFBC_FORMAT_MOD_YTR | AFBC_FORMAT_MOD_SPARSE), > + DRM_FORMAT_MOD_LINEAR, > + DRM_FORMAT_MOD_INVALID > + }; > + > formats = kcalloc(map->n_pixel_formats, sizeof(*formats), GFP_KERNEL); > if (!formats) { > ret = -ENOMEM; > @@ -547,9 +584,14 @@ int malidp_de_planes_init(struct drm_device *drm) > > plane_type = (i == 0) ? DRM_PLANE_TYPE_PRIMARY : > DRM_PLANE_TYPE_OVERLAY; > + > + /* > + * All the layers except smart layer supports AFBC modifiers. > + */ > ret = drm_universal_plane_init(drm, &plane->base, crtcs, > - &malidp_de_plane_funcs, formats, > - n, NULL, plane_type, NULL); > + &malidp_de_plane_funcs, formats, n, > + (id == DE_SMART) ? NULL : modifiers, plane_type, NULL); > + > if (ret < 0) > goto cleanup; > > -- > 2.7.4 >
On Tue, Jun 26, 2018 at 02:21:58PM +0100, Liviu Dudau wrote: > On Fri, Jun 15, 2018 at 02:51:34PM +0100, Ayan Kumar Halder wrote: > > On planes which support AFBC, expose an AFBC modifier for use with BGR888. > > > > Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com> > > Reviewed-by: Brian Starkey <brian.starkey@arm.com> > > > > Change-Id: I4739ff55c0f6d5715b268cb3947ed133a9ee7c2e > > Please remove the Change-Id > > > --- > > drivers/gpu/drm/arm/malidp_drv.c | 1 + > > drivers/gpu/drm/arm/malidp_planes.c | 46 +++++++++++++++++++++++++++++++++++-- > > 2 files changed, 45 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/gpu/drm/arm/malidp_drv.c b/drivers/gpu/drm/arm/malidp_drv.c > > index 7b6a848..7bcd679 100644 > > --- a/drivers/gpu/drm/arm/malidp_drv.c > > +++ b/drivers/gpu/drm/arm/malidp_drv.c > > @@ -392,6 +392,7 @@ static int malidp_init(struct drm_device *drm) > > drm->mode_config.max_height = hwdev->max_line_size; > > drm->mode_config.funcs = &malidp_mode_config_funcs; > > drm->mode_config.helper_private = &malidp_mode_config_helpers; > > + drm->mode_config.allow_fb_modifiers = true; > > > > ret = malidp_crtc_init(drm); > > if (ret) { > > diff --git a/drivers/gpu/drm/arm/malidp_planes.c b/drivers/gpu/drm/arm/malidp_planes.c > > index 3950504..55c9a1f6 100644 > > --- a/drivers/gpu/drm/arm/malidp_planes.c > > +++ b/drivers/gpu/drm/arm/malidp_planes.c > > @@ -124,6 +124,35 @@ static void malidp_plane_atomic_print_state(struct drm_printer *p, > > drm_printf(p, "\tn_planes=%u\n", ms->n_planes); > > } > > > > +static bool malidp_format_mod_supported(struct drm_plane *plane, > > + u32 format, u64 modifier) > > +{ > > + if (WARN_ON(modifier == DRM_FORMAT_MOD_INVALID)) > > + return false; > > + > > + /* All the pixel formats are supported without any modifier */ > > + if (modifier == DRM_FORMAT_MOD_LINEAR) > > + return true; > > + > > + if ((modifier >> 56) != DRM_FORMAT_MOD_VENDOR_ARM) > > + return false; > > + > > + if (modifier & > > + ~DRM_FORMAT_MOD_ARM_AFBC(AFBC_MOD_VALID_BITS)) { > > + DRM_ERROR("Unsupported modifiers\n"); > > I don't think we should polute the kernel log buffers with this. Maybe a > DRM_DEBUG() if you really want to get some notification? I agree with you completely. I think we should use DRM_DEBUG_KMS() like intel_framebuffer_init() uses to log unsupported formats and modifiers. I will send a v2 patch for this. > > With those changes added: > > Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> > > Best regards, > Liviu > > > + return false; > > + } > > + > > + switch (modifier) { > > + case DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 | > > + AFBC_FORMAT_MOD_YTR | > > + AFBC_FORMAT_MOD_SPARSE): > > + if (format == DRM_FORMAT_BGR888) > > + return true; > > + } > > + return false; > > +} > > + > > static const struct drm_plane_funcs malidp_de_plane_funcs = { > > .update_plane = drm_atomic_helper_update_plane, > > .disable_plane = drm_atomic_helper_disable_plane, > > @@ -132,6 +161,7 @@ static const struct drm_plane_funcs malidp_de_plane_funcs = { > > .atomic_duplicate_state = malidp_duplicate_plane_state, > > .atomic_destroy_state = malidp_destroy_plane_state, > > .atomic_print_state = malidp_plane_atomic_print_state, > > + .format_mod_supported = malidp_format_mod_supported, > > }; > > > > static int malidp_se_check_scaling(struct malidp_plane *mp, > > @@ -524,6 +554,13 @@ int malidp_de_planes_init(struct drm_device *drm) > > u32 *formats; > > int ret, i, j, n; > > > > + static const u64 modifiers[] = { > > + DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 | > > + AFBC_FORMAT_MOD_YTR | AFBC_FORMAT_MOD_SPARSE), > > + DRM_FORMAT_MOD_LINEAR, > > + DRM_FORMAT_MOD_INVALID > > + }; > > + > > formats = kcalloc(map->n_pixel_formats, sizeof(*formats), GFP_KERNEL); > > if (!formats) { > > ret = -ENOMEM; > > @@ -547,9 +584,14 @@ int malidp_de_planes_init(struct drm_device *drm) > > > > plane_type = (i == 0) ? DRM_PLANE_TYPE_PRIMARY : > > DRM_PLANE_TYPE_OVERLAY; > > + > > + /* > > + * All the layers except smart layer supports AFBC modifiers. > > + */ > > ret = drm_universal_plane_init(drm, &plane->base, crtcs, > > - &malidp_de_plane_funcs, formats, > > - n, NULL, plane_type, NULL); > > + &malidp_de_plane_funcs, formats, n, > > + (id == DE_SMART) ? NULL : modifiers, plane_type, NULL); > > + > > if (ret < 0) > > goto cleanup; > > > > -- > > 2.7.4 > > > > -- > ==================== > | I would like to | > | fix the world, | > | but they're not | > | giving me the | > \ source code! / > --------------- > ??\_(???)_/?? > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff --git a/drivers/gpu/drm/arm/malidp_drv.c b/drivers/gpu/drm/arm/malidp_drv.c index 7b6a848..7bcd679 100644 --- a/drivers/gpu/drm/arm/malidp_drv.c +++ b/drivers/gpu/drm/arm/malidp_drv.c @@ -392,6 +392,7 @@ static int malidp_init(struct drm_device *drm) drm->mode_config.max_height = hwdev->max_line_size; drm->mode_config.funcs = &malidp_mode_config_funcs; drm->mode_config.helper_private = &malidp_mode_config_helpers; + drm->mode_config.allow_fb_modifiers = true; ret = malidp_crtc_init(drm); if (ret) { diff --git a/drivers/gpu/drm/arm/malidp_planes.c b/drivers/gpu/drm/arm/malidp_planes.c index 3950504..55c9a1f6 100644 --- a/drivers/gpu/drm/arm/malidp_planes.c +++ b/drivers/gpu/drm/arm/malidp_planes.c @@ -124,6 +124,35 @@ static void malidp_plane_atomic_print_state(struct drm_printer *p, drm_printf(p, "\tn_planes=%u\n", ms->n_planes); } +static bool malidp_format_mod_supported(struct drm_plane *plane, + u32 format, u64 modifier) +{ + if (WARN_ON(modifier == DRM_FORMAT_MOD_INVALID)) + return false; + + /* All the pixel formats are supported without any modifier */ + if (modifier == DRM_FORMAT_MOD_LINEAR) + return true; + + if ((modifier >> 56) != DRM_FORMAT_MOD_VENDOR_ARM) + return false; + + if (modifier & + ~DRM_FORMAT_MOD_ARM_AFBC(AFBC_MOD_VALID_BITS)) { + DRM_ERROR("Unsupported modifiers\n"); + return false; + } + + switch (modifier) { + case DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 | + AFBC_FORMAT_MOD_YTR | + AFBC_FORMAT_MOD_SPARSE): + if (format == DRM_FORMAT_BGR888) + return true; + } + return false; +} + static const struct drm_plane_funcs malidp_de_plane_funcs = { .update_plane = drm_atomic_helper_update_plane, .disable_plane = drm_atomic_helper_disable_plane, @@ -132,6 +161,7 @@ static const struct drm_plane_funcs malidp_de_plane_funcs = { .atomic_duplicate_state = malidp_duplicate_plane_state, .atomic_destroy_state = malidp_destroy_plane_state, .atomic_print_state = malidp_plane_atomic_print_state, + .format_mod_supported = malidp_format_mod_supported, }; static int malidp_se_check_scaling(struct malidp_plane *mp, @@ -524,6 +554,13 @@ int malidp_de_planes_init(struct drm_device *drm) u32 *formats; int ret, i, j, n; + static const u64 modifiers[] = { + DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 | + AFBC_FORMAT_MOD_YTR | AFBC_FORMAT_MOD_SPARSE), + DRM_FORMAT_MOD_LINEAR, + DRM_FORMAT_MOD_INVALID + }; + formats = kcalloc(map->n_pixel_formats, sizeof(*formats), GFP_KERNEL); if (!formats) { ret = -ENOMEM; @@ -547,9 +584,14 @@ int malidp_de_planes_init(struct drm_device *drm) plane_type = (i == 0) ? DRM_PLANE_TYPE_PRIMARY : DRM_PLANE_TYPE_OVERLAY; + + /* + * All the layers except smart layer supports AFBC modifiers. + */ ret = drm_universal_plane_init(drm, &plane->base, crtcs, - &malidp_de_plane_funcs, formats, - n, NULL, plane_type, NULL); + &malidp_de_plane_funcs, formats, n, + (id == DE_SMART) ? NULL : modifiers, plane_type, NULL); + if (ret < 0) goto cleanup;