| Message ID | 1529396370-18761-5-git-send-email-m.purski@samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On Tue, Jun 19, 2018 at 10:19:25AM +0200, Maciej Purski wrote: > From: Andrzej Hajda <a.hajda@samsung.com> > > The patch adds bindings to BOE HV070-WSA WSVGA panel. > Bindings are compatible with simple panel bindings. > > Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> > Signed-off-by: Maciej Purski <m.purski@samsung.com> > --- > .../bindings/display/panel/boe,hv070wsa-100.txt | 28 ++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt > > diff --git a/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt b/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt > new file mode 100644 > index 0000000..9e8eea8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt > @@ -0,0 +1,28 @@ > +BOE HV070WSA-100 7.01" WSVGA TFT LCD panel > + > +Required properties: > +- compatible: should be "boe,hv070wsa-100" > +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) > +- enable-gpio: GPIO pin to enable and disable panel (active high) enable-gpios With that, Reviewed-by: Rob Herring <robh@kernel.org> -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Jun 19, 2018 at 10:19:25AM +0200, Maciej Purski wrote: > From: Andrzej Hajda <a.hajda@samsung.com> > > The patch adds bindings to BOE HV070-WSA WSVGA panel. > Bindings are compatible with simple panel bindings. > > Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> > Signed-off-by: Maciej Purski <m.purski@samsung.com> > --- > .../bindings/display/panel/boe,hv070wsa-100.txt | 28 ++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt Applied with the fix as requested by Rob. Thierry
diff --git a/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt b/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt new file mode 100644 index 0000000..9e8eea8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt @@ -0,0 +1,28 @@ +BOE HV070WSA-100 7.01" WSVGA TFT LCD panel + +Required properties: +- compatible: should be "boe,hv070wsa-100" +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) +- enable-gpio: GPIO pin to enable and disable panel (active high) + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. + +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in [1]. This +node should describe panel's video bus. + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + + panel: panel { + compatible = "boe,hv070wsa-100"; + power-supply = <&vcc_3v3_reg>; + enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>; + port { + panel_ep: endpoint { + remote-endpoint = <&bridge_out_ep>; + }; + }; + };