| Message ID | c00ad2ebf94d105544b328c77fa1edbfe6bbc193.1531475786.git.leonard.crestez@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Am Freitag, den 13.07.2018, 13:01 +0300 schrieb Leonard Crestez: > This is functionally identical but simpler and slightly faster. > > The PU domain is turned on at boot time and never turned off. In the > current implementation the pm core will repeatedly call power_off when > the domain is unused and get -EBUSY back. If the domain is marked as > "always on" instead the pm core won't even attempt to turn it off. > > In theory on 6qp it is safe to turn PU off in suspend, however that is > best accomplished with a new core flag. > > Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> > --- > drivers/soc/imx/gpc.c | 8 ++------ > 1 file changed, 2 insertions(+), 6 deletions(-) > > Previous discussion: > * https://lkml.org/lkml/2018/7/11/431 > * https://lkml.org/lkml/2018/7/10/103 > > Attempt at turning PU off in suspend: > * https://lkml.org/lkml/2018/7/6/698 > > diff --git a/drivers/soc/imx/gpc.c b/drivers/soc/imx/gpc.c > index faf13a0b85d6..f31978e5af20 100644 > --- a/drivers/soc/imx/gpc.c > +++ b/drivers/soc/imx/gpc.c > @@ -45,11 +45,10 @@ struct imx_pm_domain { > > struct clk *clk[GPC_CLK_MAX]; > > int num_clks; > > unsigned int reg_offs; > > signed char cntr_pdn_bit; > > unsigned int ipg_rate_mhz; > > - unsigned int flags; > }; > > static inline struct imx_pm_domain * > to_imx_pm_domain(struct generic_pm_domain *genpd) > { > @@ -60,13 +59,10 @@ static int imx6_pm_domain_power_off(struct generic_pm_domain *genpd) > { > > struct imx_pm_domain *pd = to_imx_pm_domain(genpd); > > int iso, iso2sw; > > u32 val; > > > - if (pd->flags & PGC_DOMAIN_FLAG_NO_PD) > > - return -EBUSY; > - > > /* Read ISO and ISO2SW power down delays */ > > regmap_read(pd->regmap, pd->reg_offs + GPC_PGC_PUPSCR_OFFS, &val); > > iso = val & 0x3f; > > iso2sw = (val >> 8) & 0x3f; > > @@ -419,12 +415,12 @@ static int imx_gpc_probe(struct platform_device *pdev) > > return ret; > > } > > > /* Disable PU power down in normal operation if ERR009619 is present */ > > if (of_id_data->err009619_present) > > - imx_gpc_domains[GPC_PGC_DOMAIN_PU].flags |= > > - PGC_DOMAIN_FLAG_NO_PD; > > + imx_gpc_domains[GPC_PGC_DOMAIN_PU].base.flags |= > > + GENPD_FLAG_ALWAYS_ON; > > > /* Keep DISP always on if ERR006287 is present */ > > if (of_id_data->err006287_present) > > imx_gpc_domains[GPC_PGC_DOMAIN_DISPLAY].base.flags |= > > GENPD_FLAG_ALWAYS_ON;
On 13 July 2018 at 12:01, Leonard Crestez <leonard.crestez@nxp.com> wrote: > This is functionally identical but simpler and slightly faster. > > The PU domain is turned on at boot time and never turned off. In the > current implementation the pm core will repeatedly call power_off when > the domain is unused and get -EBUSY back. If the domain is marked as > "always on" instead the pm core won't even attempt to turn it off. > > In theory on 6qp it is safe to turn PU off in suspend, however that is > best accomplished with a new core flag. > > Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Kind regards Uffe > --- > drivers/soc/imx/gpc.c | 8 ++------ > 1 file changed, 2 insertions(+), 6 deletions(-) > > Previous discussion: > * https://lkml.org/lkml/2018/7/11/431 > * https://lkml.org/lkml/2018/7/10/103 > > Attempt at turning PU off in suspend: > * https://lkml.org/lkml/2018/7/6/698 > > diff --git a/drivers/soc/imx/gpc.c b/drivers/soc/imx/gpc.c > index faf13a0b85d6..f31978e5af20 100644 > --- a/drivers/soc/imx/gpc.c > +++ b/drivers/soc/imx/gpc.c > @@ -45,11 +45,10 @@ struct imx_pm_domain { > struct clk *clk[GPC_CLK_MAX]; > int num_clks; > unsigned int reg_offs; > signed char cntr_pdn_bit; > unsigned int ipg_rate_mhz; > - unsigned int flags; > }; > > static inline struct imx_pm_domain * > to_imx_pm_domain(struct generic_pm_domain *genpd) > { > @@ -60,13 +59,10 @@ static int imx6_pm_domain_power_off(struct generic_pm_domain *genpd) > { > struct imx_pm_domain *pd = to_imx_pm_domain(genpd); > int iso, iso2sw; > u32 val; > > - if (pd->flags & PGC_DOMAIN_FLAG_NO_PD) > - return -EBUSY; > - > /* Read ISO and ISO2SW power down delays */ > regmap_read(pd->regmap, pd->reg_offs + GPC_PGC_PUPSCR_OFFS, &val); > iso = val & 0x3f; > iso2sw = (val >> 8) & 0x3f; > > @@ -419,12 +415,12 @@ static int imx_gpc_probe(struct platform_device *pdev) > return ret; > } > > /* Disable PU power down in normal operation if ERR009619 is present */ > if (of_id_data->err009619_present) > - imx_gpc_domains[GPC_PGC_DOMAIN_PU].flags |= > - PGC_DOMAIN_FLAG_NO_PD; > + imx_gpc_domains[GPC_PGC_DOMAIN_PU].base.flags |= > + GENPD_FLAG_ALWAYS_ON; > > /* Keep DISP always on if ERR006287 is present */ > if (of_id_data->err006287_present) > imx_gpc_domains[GPC_PGC_DOMAIN_DISPLAY].base.flags |= > GENPD_FLAG_ALWAYS_ON; > -- > 2.17.1 >
On Fri, Jul 13, 2018 at 01:01:15PM +0300, Leonard Crestez wrote: > This is functionally identical but simpler and slightly faster. > > The PU domain is turned on at boot time and never turned off. In the > current implementation the pm core will repeatedly call power_off when > the domain is unused and get -EBUSY back. If the domain is marked as > "always on" instead the pm core won't even attempt to turn it off. > > In theory on 6qp it is safe to turn PU off in suspend, however that is > best accomplished with a new core flag. > > Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Applied all, thanks.
diff --git a/drivers/soc/imx/gpc.c b/drivers/soc/imx/gpc.c index faf13a0b85d6..f31978e5af20 100644 --- a/drivers/soc/imx/gpc.c +++ b/drivers/soc/imx/gpc.c @@ -45,11 +45,10 @@ struct imx_pm_domain { struct clk *clk[GPC_CLK_MAX]; int num_clks; unsigned int reg_offs; signed char cntr_pdn_bit; unsigned int ipg_rate_mhz; - unsigned int flags; }; static inline struct imx_pm_domain * to_imx_pm_domain(struct generic_pm_domain *genpd) { @@ -60,13 +59,10 @@ static int imx6_pm_domain_power_off(struct generic_pm_domain *genpd) { struct imx_pm_domain *pd = to_imx_pm_domain(genpd); int iso, iso2sw; u32 val; - if (pd->flags & PGC_DOMAIN_FLAG_NO_PD) - return -EBUSY; - /* Read ISO and ISO2SW power down delays */ regmap_read(pd->regmap, pd->reg_offs + GPC_PGC_PUPSCR_OFFS, &val); iso = val & 0x3f; iso2sw = (val >> 8) & 0x3f; @@ -419,12 +415,12 @@ static int imx_gpc_probe(struct platform_device *pdev) return ret; } /* Disable PU power down in normal operation if ERR009619 is present */ if (of_id_data->err009619_present) - imx_gpc_domains[GPC_PGC_DOMAIN_PU].flags |= - PGC_DOMAIN_FLAG_NO_PD; + imx_gpc_domains[GPC_PGC_DOMAIN_PU].base.flags |= + GENPD_FLAG_ALWAYS_ON; /* Keep DISP always on if ERR006287 is present */ if (of_id_data->err006287_present) imx_gpc_domains[GPC_PGC_DOMAIN_DISPLAY].base.flags |= GENPD_FLAG_ALWAYS_ON;
This is functionally identical but simpler and slightly faster. The PU domain is turned on at boot time and never turned off. In the current implementation the pm core will repeatedly call power_off when the domain is unused and get -EBUSY back. If the domain is marked as "always on" instead the pm core won't even attempt to turn it off. In theory on 6qp it is safe to turn PU off in suspend, however that is best accomplished with a new core flag. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> --- drivers/soc/imx/gpc.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) Previous discussion: * https://lkml.org/lkml/2018/7/11/431 * https://lkml.org/lkml/2018/7/10/103 Attempt at turning PU off in suspend: * https://lkml.org/lkml/2018/7/6/698