| Message ID | 20180720151527.16038-12-miquel.raynal@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, 20 Jul 2018 17:15:03 +0200 Miquel Raynal <miquel.raynal@bootlin.com> wrote: > Two helpers have been added to the core to make ECC-related > configuration between the detection phase and the final NAND scan. Use > these hooks and convert the driver to just use nand_scan() instead of > both nand_scan_ident() and nand_scan_tail(). > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> > --- > drivers/mtd/nand/raw/lpc32xx_mlc.c | 109 ++++++++++++++++++++----------------- > 1 file changed, 59 insertions(+), 50 deletions(-) > > diff --git a/drivers/mtd/nand/raw/lpc32xx_mlc.c b/drivers/mtd/nand/raw/lpc32xx_mlc.c > index 052d123a8304..6f73136fa863 100644 > --- a/drivers/mtd/nand/raw/lpc32xx_mlc.c > +++ b/drivers/mtd/nand/raw/lpc32xx_mlc.c > @@ -184,6 +184,7 @@ static struct nand_bbt_descr lpc32xx_nand_bbt_mirror = { > }; > > struct lpc32xx_nand_host { > + struct platform_device *pdev; > struct nand_chip nand_chip; > struct lpc32xx_mlc_platform_data *pdata; > struct clk *clk; > @@ -653,6 +654,58 @@ static struct lpc32xx_nand_cfg_mlc *lpc32xx_parse_dt(struct device *dev) > return ncfg; > } > > +static int lpc32xx_nand_attach_chip(struct nand_chip *chip) > +{ > + struct mtd_info *mtd = nand_to_mtd(chip); > + struct lpc32xx_nand_host *host = nand_get_controller_data(chip); > + struct device *dev = &host->pdev->dev; > + > + host->dma_buf = devm_kzalloc(dev, mtd->writesize, GFP_KERNEL); > + if (!host->dma_buf) > + return -ENOMEM; > + > + host->dummy_buf = devm_kzalloc(dev, mtd->writesize, GFP_KERNEL); > + if (!host->dummy_buf) > + return -ENOMEM; > + > + chip->ecc.mode = NAND_ECC_HW; > + chip->ecc.size = 512; > + mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops); > + host->mlcsubpages = mtd->writesize / 512; > + > + /* initially clear interrupt status */ > + readb(MLC_IRQ_SR(host->io_base)); > + > + init_completion(&host->comp_nand); > + init_completion(&host->comp_controller); > + > + host->irq = platform_get_irq(host->pdev, 0); > + if (host->irq < 0) { > + dev_err(dev, "failed to get platform irq\n"); > + return -EINVAL; > + } > + > + if (request_irq(host->irq, (irq_handler_t)&lpc3xxx_nand_irq, > + IRQF_TRIGGER_HIGH, DRV_NAME, host)) { > + dev_err(dev, "Error requesting NAND IRQ\n"); > + return -ENXIO; > + } > + > + return 0; > +} > + > +static void lpc32xx_nand_detach_chip(struct nand_chip *chip) > +{ > + struct lpc32xx_nand_host *host = nand_get_controller_data(chip); > + > + free_irq(host->irq, host); Now you call 2 times free_irq() in the ->remove() path. > +} > + > +static const struct nand_controller_ops lpc32xx_nand_controller_ops = { > + .attach_chip = lpc32xx_nand_attach_chip, > + .detach_chip = lpc32xx_nand_detach_chip, > +}; > + > /* > * Probe for NAND controller > */ > @@ -669,6 +722,8 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) > if (!host) > return -ENOMEM; > > + host->pdev = pdev; > + > rc = platform_get_resource(pdev, IORESOURCE_MEM, 0); > host->io_base = devm_ioremap_resource(&pdev->dev, rc); > if (IS_ERR(host->io_base)) > @@ -749,58 +804,14 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) > } > > /* > - * Scan to find existance of the device and > - * Get the type of NAND device SMALL block or LARGE block > + * Scan to find existence of the device and get the type of NAND device: > + * SMALL block or LARGE block. > */ > - res = nand_scan_ident(mtd, 1, NULL); > + nand_chip->dummy_controller.ops = &lpc32xx_nand_controller_ops; > + res = nand_scan(mtd, 1); > if (res) > goto release_dma_chan; > > - host->dma_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL); > - if (!host->dma_buf) { > - res = -ENOMEM; > - goto release_dma_chan; > - } > - > - host->dummy_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL); > - if (!host->dummy_buf) { > - res = -ENOMEM; > - goto release_dma_chan; > - } > - > - nand_chip->ecc.mode = NAND_ECC_HW; > - nand_chip->ecc.size = 512; > - mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops); > - host->mlcsubpages = mtd->writesize / 512; > - Starting here... > - /* initially clear interrupt status */ > - readb(MLC_IRQ_SR(host->io_base)); > - > - init_completion(&host->comp_nand); > - init_completion(&host->comp_controller); > - > - host->irq = platform_get_irq(pdev, 0); > - if (host->irq < 0) { > - dev_err(&pdev->dev, "failed to get platform irq\n"); > - res = -EINVAL; > - goto release_dma_chan; > - } > - > - if (request_irq(host->irq, (irq_handler_t)&lpc3xxx_nand_irq, > - IRQF_TRIGGER_HIGH, DRV_NAME, host)) { > - dev_err(&pdev->dev, "Error requesting NAND IRQ\n"); > - res = -ENXIO; > - goto release_dma_chan; > - } till there: maybe we should just move this block before nand_scan(). Registering an IRQ handler is not really something you should do in ->attach_chip() IMO. > - > - /* > - * Fills out all the uninitialized function pointers with the defaults > - * And scans for a bad block table if appropriate. > - */ > - res = nand_scan_tail(mtd); > - if (res) > - goto free_irq; > - > mtd->name = DRV_NAME; > > res = mtd_device_register(mtd, host->ncfg->parts, > @@ -812,8 +823,6 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) > > cleanup_nand: > nand_cleanup(nand_chip); > -free_irq: > - free_irq(host->irq, host); > release_dma_chan: > if (use_dma) > dma_release_channel(host->dma_chan);
diff --git a/drivers/mtd/nand/raw/lpc32xx_mlc.c b/drivers/mtd/nand/raw/lpc32xx_mlc.c index 052d123a8304..6f73136fa863 100644 --- a/drivers/mtd/nand/raw/lpc32xx_mlc.c +++ b/drivers/mtd/nand/raw/lpc32xx_mlc.c @@ -184,6 +184,7 @@ static struct nand_bbt_descr lpc32xx_nand_bbt_mirror = { }; struct lpc32xx_nand_host { + struct platform_device *pdev; struct nand_chip nand_chip; struct lpc32xx_mlc_platform_data *pdata; struct clk *clk; @@ -653,6 +654,58 @@ static struct lpc32xx_nand_cfg_mlc *lpc32xx_parse_dt(struct device *dev) return ncfg; } +static int lpc32xx_nand_attach_chip(struct nand_chip *chip) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + struct lpc32xx_nand_host *host = nand_get_controller_data(chip); + struct device *dev = &host->pdev->dev; + + host->dma_buf = devm_kzalloc(dev, mtd->writesize, GFP_KERNEL); + if (!host->dma_buf) + return -ENOMEM; + + host->dummy_buf = devm_kzalloc(dev, mtd->writesize, GFP_KERNEL); + if (!host->dummy_buf) + return -ENOMEM; + + chip->ecc.mode = NAND_ECC_HW; + chip->ecc.size = 512; + mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops); + host->mlcsubpages = mtd->writesize / 512; + + /* initially clear interrupt status */ + readb(MLC_IRQ_SR(host->io_base)); + + init_completion(&host->comp_nand); + init_completion(&host->comp_controller); + + host->irq = platform_get_irq(host->pdev, 0); + if (host->irq < 0) { + dev_err(dev, "failed to get platform irq\n"); + return -EINVAL; + } + + if (request_irq(host->irq, (irq_handler_t)&lpc3xxx_nand_irq, + IRQF_TRIGGER_HIGH, DRV_NAME, host)) { + dev_err(dev, "Error requesting NAND IRQ\n"); + return -ENXIO; + } + + return 0; +} + +static void lpc32xx_nand_detach_chip(struct nand_chip *chip) +{ + struct lpc32xx_nand_host *host = nand_get_controller_data(chip); + + free_irq(host->irq, host); +} + +static const struct nand_controller_ops lpc32xx_nand_controller_ops = { + .attach_chip = lpc32xx_nand_attach_chip, + .detach_chip = lpc32xx_nand_detach_chip, +}; + /* * Probe for NAND controller */ @@ -669,6 +722,8 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) if (!host) return -ENOMEM; + host->pdev = pdev; + rc = platform_get_resource(pdev, IORESOURCE_MEM, 0); host->io_base = devm_ioremap_resource(&pdev->dev, rc); if (IS_ERR(host->io_base)) @@ -749,58 +804,14 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) } /* - * Scan to find existance of the device and - * Get the type of NAND device SMALL block or LARGE block + * Scan to find existence of the device and get the type of NAND device: + * SMALL block or LARGE block. */ - res = nand_scan_ident(mtd, 1, NULL); + nand_chip->dummy_controller.ops = &lpc32xx_nand_controller_ops; + res = nand_scan(mtd, 1); if (res) goto release_dma_chan; - host->dma_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL); - if (!host->dma_buf) { - res = -ENOMEM; - goto release_dma_chan; - } - - host->dummy_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL); - if (!host->dummy_buf) { - res = -ENOMEM; - goto release_dma_chan; - } - - nand_chip->ecc.mode = NAND_ECC_HW; - nand_chip->ecc.size = 512; - mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops); - host->mlcsubpages = mtd->writesize / 512; - - /* initially clear interrupt status */ - readb(MLC_IRQ_SR(host->io_base)); - - init_completion(&host->comp_nand); - init_completion(&host->comp_controller); - - host->irq = platform_get_irq(pdev, 0); - if (host->irq < 0) { - dev_err(&pdev->dev, "failed to get platform irq\n"); - res = -EINVAL; - goto release_dma_chan; - } - - if (request_irq(host->irq, (irq_handler_t)&lpc3xxx_nand_irq, - IRQF_TRIGGER_HIGH, DRV_NAME, host)) { - dev_err(&pdev->dev, "Error requesting NAND IRQ\n"); - res = -ENXIO; - goto release_dma_chan; - } - - /* - * Fills out all the uninitialized function pointers with the defaults - * And scans for a bad block table if appropriate. - */ - res = nand_scan_tail(mtd); - if (res) - goto free_irq; - mtd->name = DRV_NAME; res = mtd_device_register(mtd, host->ncfg->parts, @@ -812,8 +823,6 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) cleanup_nand: nand_cleanup(nand_chip); -free_irq: - free_irq(host->irq, host); release_dma_chan: if (use_dma) dma_release_channel(host->dma_chan);
Two helpers have been added to the core to make ECC-related configuration between the detection phase and the final NAND scan. Use these hooks and convert the driver to just use nand_scan() instead of both nand_scan_ident() and nand_scan_tail(). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/mtd/nand/raw/lpc32xx_mlc.c | 109 ++++++++++++++++++++----------------- 1 file changed, 59 insertions(+), 50 deletions(-)