diff mbox

[1/2] dt-bindings: spi: add DT bindings for UniPhier SPI controller

Message ID 1531983117-9443-2-git-send-email-hayashibara.keiji@socionext.com (mailing list archive)
State New, archived
Headers show

Commit Message

Keiji Hayashibara July 19, 2018, 6:51 a.m. UTC
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

Add DT bindings for SPI controller implemented in UniPhier SoCs.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com>
---
 .../devicetree/bindings/spi/spi-uniphier.txt       | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/spi-uniphier.txt

Comments

Rob Herring July 25, 2018, 7:17 p.m. UTC | #1
On Thu, Jul 19, 2018 at 03:51:56PM +0900, Keiji Hayashibara wrote:
> From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> 
> Add DT bindings for SPI controller implemented in UniPhier SoCs.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com>
> ---
>  .../devicetree/bindings/spi/spi-uniphier.txt       | 26 ++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/spi/spi-uniphier.txt

Reviewed-by: Rob Herring <robh@kernel.org>
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
new file mode 100644
index 0000000..9c8c4a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
@@ -0,0 +1,26 @@ 
+Socionext UniPhier SPI controller driver
+
+UniPhier SoCs have two types of SPI controllers; SCSSI supports a
+single channel, and MCSSI supports multiple channels.
+Both of them support the SPI master mode only.
+
+Required properties:
+ - compatible: should be
+	"socionext,uniphier-scssi" - for SCSSI device
+	"socionext,uniphier-mcssi" - for MCSSI device
+ - reg: address and length of the spi master registers
+ - #address-cells: must be <1>, see spi-bus.txt
+ - #size-cells: must be <0>, see spi-bus.txt
+ - clocks: A phandle to the clock for the device.
+ - resets: A phandle to the reset control for the device.
+
+Example:
+
+spi0: spi@54006000 {
+	compatible = "socionext,uniphier-scssi";
+	reg = <0x54006000 0x100>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clocks = <&peri_clk 11>;
+	resets = <&peri_rst 11>;
+};