@@ -46,8 +46,12 @@ static const struct renesas_family fam_rmobile __initconst __maybe_unused = {
.reg = 0xe600101c, /* CCCR (Common Chip Code Register) */
};
-static const struct renesas_family fam_rza __initconst __maybe_unused = {
- .name = "RZ/A",
+static const struct renesas_family fam_rza1 __initconst __maybe_unused = {
+ .name = "RZ/A1",
+};
+
+static const struct renesas_family fam_rza2 __initconst __maybe_unused = {
+ .name = "RZ/A2",
};
static const struct renesas_family fam_rzg __initconst __maybe_unused = {
@@ -67,7 +71,12 @@ struct renesas_soc {
};
static const struct renesas_soc soc_rz_a1h __initconst __maybe_unused = {
- .family = &fam_rza,
+ .family = &fam_rza1,
+};
+
+static const struct renesas_soc soc_rz_a2m __initconst __maybe_unused = {
+ .family = &fam_rza2,
+ .id = 0x3b,
};
static const struct renesas_soc soc_rmobile_ape6 __initconst __maybe_unused = {
@@ -184,6 +193,9 @@ static const struct of_device_id renesas_socs[] __initconst = {
#ifdef CONFIG_ARCH_R7S72100
{ .compatible = "renesas,r7s72100", .data = &soc_rz_a1h },
#endif
+#ifdef CONFIG_ARCH_R7S9210
+ { .compatible = "renesas,r7s9210", .data = &soc_rz_a2m },
+#endif
#ifdef CONFIG_ARCH_R8A73A4
{ .compatible = "renesas,r8a73a4", .data = &soc_rmobile_ape6 },
#endif
@@ -262,7 +274,7 @@ static int __init renesas_soc_init(void)
void __iomem *chipid = NULL;
struct soc_device *soc_dev;
struct device_node *np;
- unsigned int product;
+ unsigned int product, eshi = 0, eslo;
match = of_match_node(renesas_socs, of_root);
if (!match)
@@ -271,6 +283,31 @@ static int __init renesas_soc_init(void)
soc = match->data;
family = soc->family;
+ np = of_find_compatible_node(NULL, NULL, "renesas,bsid");
+ if (np) {
+ chipid = of_iomap(np, 0);
+ of_node_put(np);
+
+ if (chipid) {
+ product = readl(chipid);
+ iounmap(chipid);
+
+ if (soc->id && ((product >> 16) & 0xff) != soc->id) {
+ pr_warn("SoC mismatch (product = 0x%x)\n",
+ product);
+ return -ENODEV;
+ }
+ }
+
+ /*
+ * TODO: Upper 4 bits of BSID are for chip version, but the
+ * format is not known at this time so we don't know how to
+ * specify eshi and eslo
+ */
+
+ goto done;
+ }
+
/* Try PRR first, then hardcoded fallback */
np = of_find_compatible_node(NULL, NULL, "renesas,prr");
if (np) {
@@ -289,8 +326,11 @@ static int __init renesas_soc_init(void)
pr_warn("SoC mismatch (product = 0x%x)\n", product);
return -ENODEV;
}
+ eshi = ((product >> 4) & 0x0f) + 1;
+ eslo = product & 0xf;
}
+done:
soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
if (!soc_dev_attr)
return -ENOMEM;
@@ -302,10 +342,9 @@ static int __init renesas_soc_init(void)
soc_dev_attr->family = kstrdup_const(family->name, GFP_KERNEL);
soc_dev_attr->soc_id = kstrdup_const(strchr(match->compatible, ',') + 1,
GFP_KERNEL);
- if (chipid)
- soc_dev_attr->revision = kasprintf(GFP_KERNEL, "ES%u.%u",
- ((product >> 4) & 0x0f) + 1,
- product & 0xf);
+ if (eshi)
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "ES%u.%u", eshi,
+ eslo);
pr_info("Detected Renesas %s %s %s\n", soc_dev_attr->family,
soc_dev_attr->soc_id, soc_dev_attr->revision ?: "");
Add support for identifying the RZ/A2M (R7S9210) SoC. Also add support for reading the BSID register which is a different format than the PRR. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> --- v2: * Remove 'hard coded' section because there will not be andy non-DT legacy support needed * Make displaying the chip revision more flexible for the future case when the revision number from the BSID will be displayed --- drivers/soc/renesas/renesas-soc.c | 55 +++++++++++++++++++++++++++++++++------ 1 file changed, 47 insertions(+), 8 deletions(-)