diff mbox

[v3,3/3] Add "Group Identifier" support to Red Hat PCI Express bridge.

Message ID 20180629221907.3662-4-venu.busireddy@oracle.com (mailing list archive)
State New, archived
Headers show

Commit Message

Venu Busireddy June 29, 2018, 10:19 p.m. UTC
Add a new bridge device "pcie-downstream" with a
Vendor ID of PCI_VENDOR_ID_REDHAT and a Device ID of
PCI_DEVICE_ID_REDHAT_DOWNPORT_FAILOVER. Also, add the "Vendor-Specific"
capability to the bridge to contain the "Group Identifier" that will be
used to pair a virtio device with the passthrough device attached to
that bridge.

This capability is added to the bridge iff the "failover-group-id"
option is specified for the bridge.

Signed-off-by: Venu Busireddy <venu.busireddy@oracle.com>
---
 default-configs/arm-softmmu.mak    |   1 +
 default-configs/i386-softmmu.mak   |   1 +
 default-configs/x86_64-softmmu.mak |   1 +
 hw/pci-bridge/Makefile.objs        |   1 +
 hw/pci-bridge/pcie_downstream.c    | 220 +++++++++++++++++++++++++++++
 hw/pci-bridge/pcie_downstream.h    |  10 ++
 include/hw/pci/pci.h               |   1 +
 7 files changed, 235 insertions(+)
 create mode 100644 hw/pci-bridge/pcie_downstream.c
 create mode 100644 hw/pci-bridge/pcie_downstream.h

Comments

Marcel Apfelbaum July 7, 2018, 12:14 p.m. UTC | #1
Hi Venu,

On 06/30/2018 01:19 AM, Venu Busireddy wrote:
> Add a new bridge device "pcie-downstream" with a
> Vendor ID of PCI_VENDOR_ID_REDHAT and a Device ID of
> PCI_DEVICE_ID_REDHAT_DOWNPORT_FAILOVER.

Can't we use the current pcie-pci-bridge device (see 
hw/pci-bridge/pcie_pci_bridge.c)
by adding the new vendor capability to it so we will not need to support 
a new bridge?

Thanks,
Marcel

>   Also, add the "Vendor-Specific"
> capability to the bridge to contain the "Group Identifier" that will be
> used to pair a virtio device with the passthrough device attached to
> that bridge.
>
> This capability is added to the bridge iff the "failover-group-id"
> option is specified for the bridge.
>
> Signed-off-by: Venu Busireddy <venu.busireddy@oracle.com>
> ---
>   default-configs/arm-softmmu.mak    |   1 +
>   default-configs/i386-softmmu.mak   |   1 +
>   default-configs/x86_64-softmmu.mak |   1 +
>   hw/pci-bridge/Makefile.objs        |   1 +
>   hw/pci-bridge/pcie_downstream.c    | 220 +++++++++++++++++++++++++++++
>   hw/pci-bridge/pcie_downstream.h    |  10 ++
>   include/hw/pci/pci.h               |   1 +
>   7 files changed, 235 insertions(+)
>   create mode 100644 hw/pci-bridge/pcie_downstream.c
>   create mode 100644 hw/pci-bridge/pcie_downstream.h
>
> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
> index 834d45cfaf..b86c6fb122 100644
> --- a/default-configs/arm-softmmu.mak
> +++ b/default-configs/arm-softmmu.mak
> @@ -139,6 +139,7 @@ CONFIG_IMX_I2C=y
>   CONFIG_PCIE_PORT=y
>   CONFIG_XIO3130=y
>   CONFIG_IOH3420=y
> +CONFIG_PCIE_DOWNSTREAM=y
>   CONFIG_I82801B11=y
>   CONFIG_ACPI=y
>   CONFIG_SMBIOS=y
> diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
> index 8c7d4a0fa0..a900c8f052 100644
> --- a/default-configs/i386-softmmu.mak
> +++ b/default-configs/i386-softmmu.mak
> @@ -56,6 +56,7 @@ CONFIG_ACPI_NVDIMM=y
>   CONFIG_PCIE_PORT=y
>   CONFIG_XIO3130=y
>   CONFIG_IOH3420=y
> +CONFIG_PCIE_DOWNSTREAM=y
>   CONFIG_I82801B11=y
>   CONFIG_SMBIOS=y
>   CONFIG_HYPERV_TESTDEV=$(CONFIG_KVM)
> diff --git a/default-configs/x86_64-softmmu.mak b/default-configs/x86_64-softmmu.mak
> index 0390b4303c..481e4764be 100644
> --- a/default-configs/x86_64-softmmu.mak
> +++ b/default-configs/x86_64-softmmu.mak
> @@ -56,6 +56,7 @@ CONFIG_ACPI_NVDIMM=y
>   CONFIG_PCIE_PORT=y
>   CONFIG_XIO3130=y
>   CONFIG_IOH3420=y
> +CONFIG_PCIE_DOWNSTREAM=y
>   CONFIG_I82801B11=y
>   CONFIG_SMBIOS=y
>   CONFIG_HYPERV_TESTDEV=$(CONFIG_KVM)
> diff --git a/hw/pci-bridge/Makefile.objs b/hw/pci-bridge/Makefile.objs
> index 47065f87d9..5b42212edc 100644
> --- a/hw/pci-bridge/Makefile.objs
> +++ b/hw/pci-bridge/Makefile.objs
> @@ -3,6 +3,7 @@ common-obj-$(CONFIG_PCIE_PORT) += pcie_root_port.o gen_pcie_root_port.o pcie_pci
>   common-obj-$(CONFIG_PXB) += pci_expander_bridge.o
>   common-obj-$(CONFIG_XIO3130) += xio3130_upstream.o xio3130_downstream.o
>   common-obj-$(CONFIG_IOH3420) += ioh3420.o
> +common-obj-$(CONFIG_PCIE_DOWNSTREAM) += pcie_downstream.o
>   common-obj-$(CONFIG_I82801B11) += i82801b11.o
>   # NewWorld PowerMac
>   common-obj-$(CONFIG_DEC_PCI) += dec.o
> diff --git a/hw/pci-bridge/pcie_downstream.c b/hw/pci-bridge/pcie_downstream.c
> new file mode 100644
> index 0000000000..49b0d1e933
> --- /dev/null
> +++ b/hw/pci-bridge/pcie_downstream.c
> @@ -0,0 +1,220 @@
> +/*
> + * Red Hat PCI Express downstream port.
> + *
> + * pcie_downstream.c
> + * Most of this code is copied from xio3130_downstream.c
> + *
> + * Copyright (c) 2018 Oracle and/or its affiliates.
> + *         Author: Venu Busireddy <venu.busireddy@oracle.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "hw/pci/pci_ids.h"
> +#include "hw/pci/msi.h"
> +#include "hw/pci/pcie.h"
> +#include "pcie_downstream.h"
> +#include "qapi/error.h"
> +
> +#define REDHAT_PCIE_DOWNSTREAM_REVISION                 0x1
> +#define REDHAT_PCIE_DOWNSTREAM_MSI_OFFSET               0x70
> +#define REDHAT_PCIE_DOWNSTREAM_MSI_SUPPORTED_FLAGS      PCI_MSI_FLAGS_64BIT
> +#define REDHAT_PCIE_DOWNSTREAM_MSI_NR_VECTOR            1
> +#define REDHAT_PCIE_DOWNSTREAM_SSVID_OFFSET             0x80
> +#define REDHAT_PCIE_DOWNSTREAM_SSVID_SVID               0
> +#define REDHAT_PCIE_DOWNSTREAM_SSVID_SSID               0
> +#define REDHAT_PCIE_DOWNSTREAM_EXP_OFFSET               0x90
> +#define REDHAT_PCIE_DOWNSTREAM_VENDOR_OFFSET            0xCC
> +#define REDHAT_PCIE_DOWNSTREAM_AER_OFFSET               0x100
> +
> +static void pcie_downstream_write_config(PCIDevice *d, uint32_t address,
> +                                         uint32_t val, int len)
> +{
> +    pci_bridge_write_config(d, address, val, len);
> +    pcie_cap_flr_write_config(d, address, val, len);
> +    pcie_cap_slot_write_config(d, address, val, len);
> +    pcie_aer_write_config(d, address, val, len);
> +}
> +
> +static void pcie_downstream_reset(DeviceState *qdev)
> +{
> +    PCIDevice *d = PCI_DEVICE(qdev);
> +
> +    pcie_cap_deverr_reset(d);
> +    pcie_cap_slot_reset(d);
> +    pcie_cap_arifwd_reset(d);
> +    pci_bridge_reset(qdev);
> +}
> +
> +static void pcie_downstream_realize(PCIDevice *d, Error **errp)
> +{
> +    PCIEPort *p = PCIE_PORT(d);
> +    PCIESlot *s = PCIE_SLOT(d);
> +    int rc;
> +
> +    pci_bridge_initfn(d, TYPE_PCIE_BUS);
> +    pcie_port_init_reg(d);
> +
> +    rc = pci_bridge_vendor_init(d, REDHAT_PCIE_DOWNSTREAM_VENDOR_OFFSET,
> +            PCI_DEVICE_ID_REDHAT_DOWNPORT_FAILOVER, errp);
> +    if (rc < 0) {
> +        error_append_hint(errp, "Can't init group ID, error %d\n", rc);
> +        goto err_bridge;
> +    }
> +
> +    rc = msi_init(d, REDHAT_PCIE_DOWNSTREAM_MSI_OFFSET,
> +            REDHAT_PCIE_DOWNSTREAM_MSI_NR_VECTOR,
> +            REDHAT_PCIE_DOWNSTREAM_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_64BIT,
> +            REDHAT_PCIE_DOWNSTREAM_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_MASKBIT,
> +            errp);
> +    if (rc < 0) {
> +        assert(rc == -ENOTSUP);
> +        goto err_bridge;
> +    }
> +
> +    rc = pci_bridge_ssvid_init(d, REDHAT_PCIE_DOWNSTREAM_SSVID_OFFSET,
> +            REDHAT_PCIE_DOWNSTREAM_SSVID_SVID,
> +            REDHAT_PCIE_DOWNSTREAM_SSVID_SSID, errp);
> +    if (rc < 0) {
> +        goto err_bridge;
> +    }
> +
> +    rc = pcie_cap_init(d, REDHAT_PCIE_DOWNSTREAM_EXP_OFFSET,
> +            PCI_EXP_TYPE_DOWNSTREAM, p->port, errp);
> +    if (rc < 0) {
> +        goto err_msi;
> +    }
> +    pcie_cap_flr_init(d);
> +    pcie_cap_deverr_init(d);
> +    pcie_cap_slot_init(d, s->slot);
> +    pcie_cap_arifwd_init(d);
> +
> +    pcie_chassis_create(s->chassis);
> +    rc = pcie_chassis_add_slot(s);
> +    if (rc < 0) {
> +        error_setg(errp, "Can't add chassis slot, error %d", rc);
> +        goto err_pcie_cap;
> +    }
> +
> +    rc = pcie_aer_init(d, PCI_ERR_VER, REDHAT_PCIE_DOWNSTREAM_AER_OFFSET,
> +            PCI_ERR_SIZEOF, errp);
> +    if (rc < 0) {
> +        goto err;
> +    }
> +
> +    return;
> +
> +err:
> +    pcie_chassis_del_slot(s);
> +err_pcie_cap:
> +    pcie_cap_exit(d);
> +err_msi:
> +    msi_uninit(d);
> +err_bridge:
> +    pci_bridge_exitfn(d);
> +}
> +
> +static void pcie_downstream_exitfn(PCIDevice *d)
> +{
> +    PCIESlot *s = PCIE_SLOT(d);
> +
> +    pcie_aer_exit(d);
> +    pcie_chassis_del_slot(s);
> +    pcie_cap_exit(d);
> +    msi_uninit(d);
> +    pci_bridge_exitfn(d);
> +}
> +
> +PCIESlot *pcie_downstream_init(PCIBus *bus, int devfn, bool multifunction,
> +                               const char *bus_name, pci_map_irq_fn map_irq,
> +                               uint8_t port, uint8_t chassis, uint16_t slot)
> +{
> +    PCIDevice *d;
> +    PCIBridge *br;
> +    DeviceState *qdev;
> +
> +    d = pci_create_multifunction(bus, devfn, multifunction, "pcie-downstream");
> +    if (!d) {
> +        return NULL;
> +    }
> +    br = PCI_BRIDGE(d);
> +
> +    qdev = DEVICE(d);
> +    pci_bridge_map_irq(br, bus_name, map_irq);
> +    qdev_prop_set_uint8(qdev, "port", port);
> +    qdev_prop_set_uint8(qdev, "chassis", chassis);
> +    qdev_prop_set_uint16(qdev, "slot", slot);
> +    qdev_init_nofail(qdev);
> +
> +    return PCIE_SLOT(d);
> +}
> +
> +static Property pcie_downstream_props[] = {
> +    DEFINE_PROP_BIT(COMPAT_PROP_PCP, PCIDevice, cap_present,
> +            QEMU_PCIE_SLTCAP_PCP_BITNR, true),
> +    DEFINE_PROP_UINT64(COMPAT_PROP_FAILOVER_GROUP_ID,
> +            PCIDevice, failover_group_id, ULLONG_MAX),
> +    DEFINE_PROP_END_OF_LIST()
> +};
> +
> +static const VMStateDescription vmstate_pcie_ds = {
> +    .name = "pcie-downstream-port",
> +    .priority = MIG_PRI_PCI_BUS,
> +    .version_id = 1,
> +    .minimum_version_id = 1,
> +    .post_load = pcie_cap_slot_post_load,
> +    .fields = (VMStateField[]) {
> +        VMSTATE_PCI_DEVICE(parent_obj.parent_obj.parent_obj, PCIESlot),
> +        VMSTATE_STRUCT(parent_obj.parent_obj.parent_obj.exp.aer_log,
> +                       PCIESlot, 0, vmstate_pcie_aer_log, PCIEAERLog),
> +        VMSTATE_END_OF_LIST()
> +    }
> +};
> +
> +static void pcie_downstream_class_init(ObjectClass *klass, void *data)
> +{
> +    DeviceClass *dc = DEVICE_CLASS(klass);
> +    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
> +
> +    k->is_bridge = 1;
> +    k->config_write = pcie_downstream_write_config;
> +    k->realize = pcie_downstream_realize;
> +    k->exit = pcie_downstream_exitfn;
> +    k->vendor_id = PCI_VENDOR_ID_REDHAT;
> +    k->device_id = PCI_DEVICE_ID_REDHAT_DOWNPORT_FAILOVER;
> +    k->revision = REDHAT_PCIE_DOWNSTREAM_REVISION;
> +    set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
> +    dc->desc = "Red Hat PCIe Downstream Port";
> +    dc->reset = pcie_downstream_reset;
> +    dc->vmsd = &vmstate_pcie_ds;
> +    dc->props = pcie_downstream_props;
> +}
> +
> +static const TypeInfo pcie_downstream_info = {
> +    .name          = "pcie-downstream",
> +    .parent        = TYPE_PCIE_SLOT,
> +    .class_init    = pcie_downstream_class_init,
> +    .interfaces = (InterfaceInfo[]) {
> +        { INTERFACE_PCIE_DEVICE },
> +        { }
> +    },
> +};
> +
> +static void pcie_downstream_register_types(void)
> +{
> +    type_register_static(&pcie_downstream_info);
> +}
> +
> +type_init(pcie_downstream_register_types)
> diff --git a/hw/pci-bridge/pcie_downstream.h b/hw/pci-bridge/pcie_downstream.h
> new file mode 100644
> index 0000000000..a7f1aae4bb
> --- /dev/null
> +++ b/hw/pci-bridge/pcie_downstream.h
> @@ -0,0 +1,10 @@
> +#ifndef QEMU_PCIE_DOWNSTREAM_H
> +#define QEMU_PCIE_DOWNSTREAM_H
> +
> +#include "hw/pci/pcie_port.h"
> +
> +PCIESlot *pcie_downstream_init(PCIBus *bus, int devfn, bool multifunction,
> +        const char *bus_name, pci_map_irq_fn map_irq, uint8_t port,
> +        uint8_t chassis, uint16_t slot);
> +
> +#endif /* QEMU_PCIE_DOWNSTREAM_H */
> diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
> index bc38032761..bf04ef59f3 100644
> --- a/include/hw/pci/pci.h
> +++ b/include/hw/pci/pci.h
> @@ -103,6 +103,7 @@ extern bool pci_available;
>   #define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE        0x000e
>   #define PCI_DEVICE_ID_REDHAT_MDPY               0x000f
>   #define PCI_DEVICE_ID_REDHAT_BRIDGE_FAILOVER    0x0010
> +#define PCI_DEVICE_ID_REDHAT_DOWNPORT_FAILOVER  0x0011
>   #define PCI_DEVICE_ID_REDHAT_QXL                0x0100
>   
>   #define FMT_PCIBUS                      PRIx64
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
> For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
>
Venu Busireddy July 31, 2018, 3:58 p.m. UTC | #2
On 2018-07-07 15:14:11 +0300, Marcel Apfelbaum wrote:
> Hi Venu,
> 
> On 06/30/2018 01:19 AM, Venu Busireddy wrote:
> > Add a new bridge device "pcie-downstream" with a
> > Vendor ID of PCI_VENDOR_ID_REDHAT and a Device ID of
> > PCI_DEVICE_ID_REDHAT_DOWNPORT_FAILOVER.
> 
> Can't we use the current pcie-pci-bridge device (see
> hw/pci-bridge/pcie_pci_bridge.c)
> by adding the new vendor capability to it so we will not need to support a
> new bridge?

Sorry for the delayed response. I was away on vacation.

This question is probably better answered by Michael, but me let me try.
Michael suggested adding a new device to avoid confusion with existing
bridge devices.

Venu


> 
> Thanks,
> Marcel
> 
> >   Also, add the "Vendor-Specific"
> > capability to the bridge to contain the "Group Identifier" that will be
> > used to pair a virtio device with the passthrough device attached to
> > that bridge.
> > 
> > This capability is added to the bridge iff the "failover-group-id"
> > option is specified for the bridge.
> > 
> > Signed-off-by: Venu Busireddy <venu.busireddy@oracle.com>
> > ---
> >   default-configs/arm-softmmu.mak    |   1 +
> >   default-configs/i386-softmmu.mak   |   1 +
> >   default-configs/x86_64-softmmu.mak |   1 +
> >   hw/pci-bridge/Makefile.objs        |   1 +
> >   hw/pci-bridge/pcie_downstream.c    | 220 +++++++++++++++++++++++++++++
> >   hw/pci-bridge/pcie_downstream.h    |  10 ++
> >   include/hw/pci/pci.h               |   1 +
> >   7 files changed, 235 insertions(+)
> >   create mode 100644 hw/pci-bridge/pcie_downstream.c
> >   create mode 100644 hw/pci-bridge/pcie_downstream.h
> > 
> > diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
> > index 834d45cfaf..b86c6fb122 100644
> > --- a/default-configs/arm-softmmu.mak
> > +++ b/default-configs/arm-softmmu.mak
> > @@ -139,6 +139,7 @@ CONFIG_IMX_I2C=y
> >   CONFIG_PCIE_PORT=y
> >   CONFIG_XIO3130=y
> >   CONFIG_IOH3420=y
> > +CONFIG_PCIE_DOWNSTREAM=y
> >   CONFIG_I82801B11=y
> >   CONFIG_ACPI=y
> >   CONFIG_SMBIOS=y
> > diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
> > index 8c7d4a0fa0..a900c8f052 100644
> > --- a/default-configs/i386-softmmu.mak
> > +++ b/default-configs/i386-softmmu.mak
> > @@ -56,6 +56,7 @@ CONFIG_ACPI_NVDIMM=y
> >   CONFIG_PCIE_PORT=y
> >   CONFIG_XIO3130=y
> >   CONFIG_IOH3420=y
> > +CONFIG_PCIE_DOWNSTREAM=y
> >   CONFIG_I82801B11=y
> >   CONFIG_SMBIOS=y
> >   CONFIG_HYPERV_TESTDEV=$(CONFIG_KVM)
> > diff --git a/default-configs/x86_64-softmmu.mak b/default-configs/x86_64-softmmu.mak
> > index 0390b4303c..481e4764be 100644
> > --- a/default-configs/x86_64-softmmu.mak
> > +++ b/default-configs/x86_64-softmmu.mak
> > @@ -56,6 +56,7 @@ CONFIG_ACPI_NVDIMM=y
> >   CONFIG_PCIE_PORT=y
> >   CONFIG_XIO3130=y
> >   CONFIG_IOH3420=y
> > +CONFIG_PCIE_DOWNSTREAM=y
> >   CONFIG_I82801B11=y
> >   CONFIG_SMBIOS=y
> >   CONFIG_HYPERV_TESTDEV=$(CONFIG_KVM)
> > diff --git a/hw/pci-bridge/Makefile.objs b/hw/pci-bridge/Makefile.objs
> > index 47065f87d9..5b42212edc 100644
> > --- a/hw/pci-bridge/Makefile.objs
> > +++ b/hw/pci-bridge/Makefile.objs
> > @@ -3,6 +3,7 @@ common-obj-$(CONFIG_PCIE_PORT) += pcie_root_port.o gen_pcie_root_port.o pcie_pci
> >   common-obj-$(CONFIG_PXB) += pci_expander_bridge.o
> >   common-obj-$(CONFIG_XIO3130) += xio3130_upstream.o xio3130_downstream.o
> >   common-obj-$(CONFIG_IOH3420) += ioh3420.o
> > +common-obj-$(CONFIG_PCIE_DOWNSTREAM) += pcie_downstream.o
> >   common-obj-$(CONFIG_I82801B11) += i82801b11.o
> >   # NewWorld PowerMac
> >   common-obj-$(CONFIG_DEC_PCI) += dec.o
> > diff --git a/hw/pci-bridge/pcie_downstream.c b/hw/pci-bridge/pcie_downstream.c
> > new file mode 100644
> > index 0000000000..49b0d1e933
> > --- /dev/null
> > +++ b/hw/pci-bridge/pcie_downstream.c
> > @@ -0,0 +1,220 @@
> > +/*
> > + * Red Hat PCI Express downstream port.
> > + *
> > + * pcie_downstream.c
> > + * Most of this code is copied from xio3130_downstream.c
> > + *
> > + * Copyright (c) 2018 Oracle and/or its affiliates.
> > + *         Author: Venu Busireddy <venu.busireddy@oracle.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License along
> > + * with this program; if not, see <http://www.gnu.org/licenses/>.
> > + */
> > +
> > +#include "qemu/osdep.h"
> > +#include "hw/pci/pci_ids.h"
> > +#include "hw/pci/msi.h"
> > +#include "hw/pci/pcie.h"
> > +#include "pcie_downstream.h"
> > +#include "qapi/error.h"
> > +
> > +#define REDHAT_PCIE_DOWNSTREAM_REVISION                 0x1
> > +#define REDHAT_PCIE_DOWNSTREAM_MSI_OFFSET               0x70
> > +#define REDHAT_PCIE_DOWNSTREAM_MSI_SUPPORTED_FLAGS      PCI_MSI_FLAGS_64BIT
> > +#define REDHAT_PCIE_DOWNSTREAM_MSI_NR_VECTOR            1
> > +#define REDHAT_PCIE_DOWNSTREAM_SSVID_OFFSET             0x80
> > +#define REDHAT_PCIE_DOWNSTREAM_SSVID_SVID               0
> > +#define REDHAT_PCIE_DOWNSTREAM_SSVID_SSID               0
> > +#define REDHAT_PCIE_DOWNSTREAM_EXP_OFFSET               0x90
> > +#define REDHAT_PCIE_DOWNSTREAM_VENDOR_OFFSET            0xCC
> > +#define REDHAT_PCIE_DOWNSTREAM_AER_OFFSET               0x100
> > +
> > +static void pcie_downstream_write_config(PCIDevice *d, uint32_t address,
> > +                                         uint32_t val, int len)
> > +{
> > +    pci_bridge_write_config(d, address, val, len);
> > +    pcie_cap_flr_write_config(d, address, val, len);
> > +    pcie_cap_slot_write_config(d, address, val, len);
> > +    pcie_aer_write_config(d, address, val, len);
> > +}
> > +
> > +static void pcie_downstream_reset(DeviceState *qdev)
> > +{
> > +    PCIDevice *d = PCI_DEVICE(qdev);
> > +
> > +    pcie_cap_deverr_reset(d);
> > +    pcie_cap_slot_reset(d);
> > +    pcie_cap_arifwd_reset(d);
> > +    pci_bridge_reset(qdev);
> > +}
> > +
> > +static void pcie_downstream_realize(PCIDevice *d, Error **errp)
> > +{
> > +    PCIEPort *p = PCIE_PORT(d);
> > +    PCIESlot *s = PCIE_SLOT(d);
> > +    int rc;
> > +
> > +    pci_bridge_initfn(d, TYPE_PCIE_BUS);
> > +    pcie_port_init_reg(d);
> > +
> > +    rc = pci_bridge_vendor_init(d, REDHAT_PCIE_DOWNSTREAM_VENDOR_OFFSET,
> > +            PCI_DEVICE_ID_REDHAT_DOWNPORT_FAILOVER, errp);
> > +    if (rc < 0) {
> > +        error_append_hint(errp, "Can't init group ID, error %d\n", rc);
> > +        goto err_bridge;
> > +    }
> > +
> > +    rc = msi_init(d, REDHAT_PCIE_DOWNSTREAM_MSI_OFFSET,
> > +            REDHAT_PCIE_DOWNSTREAM_MSI_NR_VECTOR,
> > +            REDHAT_PCIE_DOWNSTREAM_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_64BIT,
> > +            REDHAT_PCIE_DOWNSTREAM_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_MASKBIT,
> > +            errp);
> > +    if (rc < 0) {
> > +        assert(rc == -ENOTSUP);
> > +        goto err_bridge;
> > +    }
> > +
> > +    rc = pci_bridge_ssvid_init(d, REDHAT_PCIE_DOWNSTREAM_SSVID_OFFSET,
> > +            REDHAT_PCIE_DOWNSTREAM_SSVID_SVID,
> > +            REDHAT_PCIE_DOWNSTREAM_SSVID_SSID, errp);
> > +    if (rc < 0) {
> > +        goto err_bridge;
> > +    }
> > +
> > +    rc = pcie_cap_init(d, REDHAT_PCIE_DOWNSTREAM_EXP_OFFSET,
> > +            PCI_EXP_TYPE_DOWNSTREAM, p->port, errp);
> > +    if (rc < 0) {
> > +        goto err_msi;
> > +    }
> > +    pcie_cap_flr_init(d);
> > +    pcie_cap_deverr_init(d);
> > +    pcie_cap_slot_init(d, s->slot);
> > +    pcie_cap_arifwd_init(d);
> > +
> > +    pcie_chassis_create(s->chassis);
> > +    rc = pcie_chassis_add_slot(s);
> > +    if (rc < 0) {
> > +        error_setg(errp, "Can't add chassis slot, error %d", rc);
> > +        goto err_pcie_cap;
> > +    }
> > +
> > +    rc = pcie_aer_init(d, PCI_ERR_VER, REDHAT_PCIE_DOWNSTREAM_AER_OFFSET,
> > +            PCI_ERR_SIZEOF, errp);
> > +    if (rc < 0) {
> > +        goto err;
> > +    }
> > +
> > +    return;
> > +
> > +err:
> > +    pcie_chassis_del_slot(s);
> > +err_pcie_cap:
> > +    pcie_cap_exit(d);
> > +err_msi:
> > +    msi_uninit(d);
> > +err_bridge:
> > +    pci_bridge_exitfn(d);
> > +}
> > +
> > +static void pcie_downstream_exitfn(PCIDevice *d)
> > +{
> > +    PCIESlot *s = PCIE_SLOT(d);
> > +
> > +    pcie_aer_exit(d);
> > +    pcie_chassis_del_slot(s);
> > +    pcie_cap_exit(d);
> > +    msi_uninit(d);
> > +    pci_bridge_exitfn(d);
> > +}
> > +
> > +PCIESlot *pcie_downstream_init(PCIBus *bus, int devfn, bool multifunction,
> > +                               const char *bus_name, pci_map_irq_fn map_irq,
> > +                               uint8_t port, uint8_t chassis, uint16_t slot)
> > +{
> > +    PCIDevice *d;
> > +    PCIBridge *br;
> > +    DeviceState *qdev;
> > +
> > +    d = pci_create_multifunction(bus, devfn, multifunction, "pcie-downstream");
> > +    if (!d) {
> > +        return NULL;
> > +    }
> > +    br = PCI_BRIDGE(d);
> > +
> > +    qdev = DEVICE(d);
> > +    pci_bridge_map_irq(br, bus_name, map_irq);
> > +    qdev_prop_set_uint8(qdev, "port", port);
> > +    qdev_prop_set_uint8(qdev, "chassis", chassis);
> > +    qdev_prop_set_uint16(qdev, "slot", slot);
> > +    qdev_init_nofail(qdev);
> > +
> > +    return PCIE_SLOT(d);
> > +}
> > +
> > +static Property pcie_downstream_props[] = {
> > +    DEFINE_PROP_BIT(COMPAT_PROP_PCP, PCIDevice, cap_present,
> > +            QEMU_PCIE_SLTCAP_PCP_BITNR, true),
> > +    DEFINE_PROP_UINT64(COMPAT_PROP_FAILOVER_GROUP_ID,
> > +            PCIDevice, failover_group_id, ULLONG_MAX),
> > +    DEFINE_PROP_END_OF_LIST()
> > +};
> > +
> > +static const VMStateDescription vmstate_pcie_ds = {
> > +    .name = "pcie-downstream-port",
> > +    .priority = MIG_PRI_PCI_BUS,
> > +    .version_id = 1,
> > +    .minimum_version_id = 1,
> > +    .post_load = pcie_cap_slot_post_load,
> > +    .fields = (VMStateField[]) {
> > +        VMSTATE_PCI_DEVICE(parent_obj.parent_obj.parent_obj, PCIESlot),
> > +        VMSTATE_STRUCT(parent_obj.parent_obj.parent_obj.exp.aer_log,
> > +                       PCIESlot, 0, vmstate_pcie_aer_log, PCIEAERLog),
> > +        VMSTATE_END_OF_LIST()
> > +    }
> > +};
> > +
> > +static void pcie_downstream_class_init(ObjectClass *klass, void *data)
> > +{
> > +    DeviceClass *dc = DEVICE_CLASS(klass);
> > +    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
> > +
> > +    k->is_bridge = 1;
> > +    k->config_write = pcie_downstream_write_config;
> > +    k->realize = pcie_downstream_realize;
> > +    k->exit = pcie_downstream_exitfn;
> > +    k->vendor_id = PCI_VENDOR_ID_REDHAT;
> > +    k->device_id = PCI_DEVICE_ID_REDHAT_DOWNPORT_FAILOVER;
> > +    k->revision = REDHAT_PCIE_DOWNSTREAM_REVISION;
> > +    set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
> > +    dc->desc = "Red Hat PCIe Downstream Port";
> > +    dc->reset = pcie_downstream_reset;
> > +    dc->vmsd = &vmstate_pcie_ds;
> > +    dc->props = pcie_downstream_props;
> > +}
> > +
> > +static const TypeInfo pcie_downstream_info = {
> > +    .name          = "pcie-downstream",
> > +    .parent        = TYPE_PCIE_SLOT,
> > +    .class_init    = pcie_downstream_class_init,
> > +    .interfaces = (InterfaceInfo[]) {
> > +        { INTERFACE_PCIE_DEVICE },
> > +        { }
> > +    },
> > +};
> > +
> > +static void pcie_downstream_register_types(void)
> > +{
> > +    type_register_static(&pcie_downstream_info);
> > +}
> > +
> > +type_init(pcie_downstream_register_types)
> > diff --git a/hw/pci-bridge/pcie_downstream.h b/hw/pci-bridge/pcie_downstream.h
> > new file mode 100644
> > index 0000000000..a7f1aae4bb
> > --- /dev/null
> > +++ b/hw/pci-bridge/pcie_downstream.h
> > @@ -0,0 +1,10 @@
> > +#ifndef QEMU_PCIE_DOWNSTREAM_H
> > +#define QEMU_PCIE_DOWNSTREAM_H
> > +
> > +#include "hw/pci/pcie_port.h"
> > +
> > +PCIESlot *pcie_downstream_init(PCIBus *bus, int devfn, bool multifunction,
> > +        const char *bus_name, pci_map_irq_fn map_irq, uint8_t port,
> > +        uint8_t chassis, uint16_t slot);
> > +
> > +#endif /* QEMU_PCIE_DOWNSTREAM_H */
> > diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
> > index bc38032761..bf04ef59f3 100644
> > --- a/include/hw/pci/pci.h
> > +++ b/include/hw/pci/pci.h
> > @@ -103,6 +103,7 @@ extern bool pci_available;
> >   #define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE        0x000e
> >   #define PCI_DEVICE_ID_REDHAT_MDPY               0x000f
> >   #define PCI_DEVICE_ID_REDHAT_BRIDGE_FAILOVER    0x0010
> > +#define PCI_DEVICE_ID_REDHAT_DOWNPORT_FAILOVER  0x0011
> >   #define PCI_DEVICE_ID_REDHAT_QXL                0x0100
> >   #define FMT_PCIBUS                      PRIx64
> > 
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
> > For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
> > 
>
Michael S. Tsirkin July 31, 2018, 4:03 p.m. UTC | #3
On Tue, Jul 31, 2018 at 10:58:37AM -0500, Venu Busireddy wrote:
> On 2018-07-07 15:14:11 +0300, Marcel Apfelbaum wrote:
> > Hi Venu,
> > 
> > On 06/30/2018 01:19 AM, Venu Busireddy wrote:
> > > Add a new bridge device "pcie-downstream" with a
> > > Vendor ID of PCI_VENDOR_ID_REDHAT and a Device ID of
> > > PCI_DEVICE_ID_REDHAT_DOWNPORT_FAILOVER.
> > 
> > Can't we use the current pcie-pci-bridge device (see
> > hw/pci-bridge/pcie_pci_bridge.c)
> > by adding the new vendor capability to it so we will not need to support a
> > new bridge?
> 
> Sorry for the delayed response. I was away on vacation.
> 
> This question is probably better answered by Michael, but me let me try.
> Michael suggested adding a new device to avoid confusion with existing
> bridge devices.
> 
> Venu

It's similar to the hotseat trick - dev id is easier to match against.

> 
> > 
> > Thanks,
> > Marcel
> > 
> > >   Also, add the "Vendor-Specific"
> > > capability to the bridge to contain the "Group Identifier" that will be
> > > used to pair a virtio device with the passthrough device attached to
> > > that bridge.
> > > 
> > > This capability is added to the bridge iff the "failover-group-id"
> > > option is specified for the bridge.
> > > 
> > > Signed-off-by: Venu Busireddy <venu.busireddy@oracle.com>
> > > ---
> > >   default-configs/arm-softmmu.mak    |   1 +
> > >   default-configs/i386-softmmu.mak   |   1 +
> > >   default-configs/x86_64-softmmu.mak |   1 +
> > >   hw/pci-bridge/Makefile.objs        |   1 +
> > >   hw/pci-bridge/pcie_downstream.c    | 220 +++++++++++++++++++++++++++++
> > >   hw/pci-bridge/pcie_downstream.h    |  10 ++
> > >   include/hw/pci/pci.h               |   1 +
> > >   7 files changed, 235 insertions(+)
> > >   create mode 100644 hw/pci-bridge/pcie_downstream.c
> > >   create mode 100644 hw/pci-bridge/pcie_downstream.h
> > > 
> > > diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
> > > index 834d45cfaf..b86c6fb122 100644
> > > --- a/default-configs/arm-softmmu.mak
> > > +++ b/default-configs/arm-softmmu.mak
> > > @@ -139,6 +139,7 @@ CONFIG_IMX_I2C=y
> > >   CONFIG_PCIE_PORT=y
> > >   CONFIG_XIO3130=y
> > >   CONFIG_IOH3420=y
> > > +CONFIG_PCIE_DOWNSTREAM=y
> > >   CONFIG_I82801B11=y
> > >   CONFIG_ACPI=y
> > >   CONFIG_SMBIOS=y
> > > diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
> > > index 8c7d4a0fa0..a900c8f052 100644
> > > --- a/default-configs/i386-softmmu.mak
> > > +++ b/default-configs/i386-softmmu.mak
> > > @@ -56,6 +56,7 @@ CONFIG_ACPI_NVDIMM=y
> > >   CONFIG_PCIE_PORT=y
> > >   CONFIG_XIO3130=y
> > >   CONFIG_IOH3420=y
> > > +CONFIG_PCIE_DOWNSTREAM=y
> > >   CONFIG_I82801B11=y
> > >   CONFIG_SMBIOS=y
> > >   CONFIG_HYPERV_TESTDEV=$(CONFIG_KVM)
> > > diff --git a/default-configs/x86_64-softmmu.mak b/default-configs/x86_64-softmmu.mak
> > > index 0390b4303c..481e4764be 100644
> > > --- a/default-configs/x86_64-softmmu.mak
> > > +++ b/default-configs/x86_64-softmmu.mak
> > > @@ -56,6 +56,7 @@ CONFIG_ACPI_NVDIMM=y
> > >   CONFIG_PCIE_PORT=y
> > >   CONFIG_XIO3130=y
> > >   CONFIG_IOH3420=y
> > > +CONFIG_PCIE_DOWNSTREAM=y
> > >   CONFIG_I82801B11=y
> > >   CONFIG_SMBIOS=y
> > >   CONFIG_HYPERV_TESTDEV=$(CONFIG_KVM)
> > > diff --git a/hw/pci-bridge/Makefile.objs b/hw/pci-bridge/Makefile.objs
> > > index 47065f87d9..5b42212edc 100644
> > > --- a/hw/pci-bridge/Makefile.objs
> > > +++ b/hw/pci-bridge/Makefile.objs
> > > @@ -3,6 +3,7 @@ common-obj-$(CONFIG_PCIE_PORT) += pcie_root_port.o gen_pcie_root_port.o pcie_pci
> > >   common-obj-$(CONFIG_PXB) += pci_expander_bridge.o
> > >   common-obj-$(CONFIG_XIO3130) += xio3130_upstream.o xio3130_downstream.o
> > >   common-obj-$(CONFIG_IOH3420) += ioh3420.o
> > > +common-obj-$(CONFIG_PCIE_DOWNSTREAM) += pcie_downstream.o
> > >   common-obj-$(CONFIG_I82801B11) += i82801b11.o
> > >   # NewWorld PowerMac
> > >   common-obj-$(CONFIG_DEC_PCI) += dec.o
> > > diff --git a/hw/pci-bridge/pcie_downstream.c b/hw/pci-bridge/pcie_downstream.c
> > > new file mode 100644
> > > index 0000000000..49b0d1e933
> > > --- /dev/null
> > > +++ b/hw/pci-bridge/pcie_downstream.c
> > > @@ -0,0 +1,220 @@
> > > +/*
> > > + * Red Hat PCI Express downstream port.
> > > + *
> > > + * pcie_downstream.c
> > > + * Most of this code is copied from xio3130_downstream.c
> > > + *
> > > + * Copyright (c) 2018 Oracle and/or its affiliates.
> > > + *         Author: Venu Busireddy <venu.busireddy@oracle.com>
> > > + *
> > > + * This program is free software; you can redistribute it and/or modify
> > > + * it under the terms of the GNU General Public License as published by
> > > + * the Free Software Foundation; either version 2 of the License, or
> > > + * (at your option) any later version.
> > > + *
> > > + * This program is distributed in the hope that it will be useful,
> > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > > + * GNU General Public License for more details.
> > > + *
> > > + * You should have received a copy of the GNU General Public License along
> > > + * with this program; if not, see <http://www.gnu.org/licenses/>.
> > > + */
> > > +
> > > +#include "qemu/osdep.h"
> > > +#include "hw/pci/pci_ids.h"
> > > +#include "hw/pci/msi.h"
> > > +#include "hw/pci/pcie.h"
> > > +#include "pcie_downstream.h"
> > > +#include "qapi/error.h"
> > > +
> > > +#define REDHAT_PCIE_DOWNSTREAM_REVISION                 0x1
> > > +#define REDHAT_PCIE_DOWNSTREAM_MSI_OFFSET               0x70
> > > +#define REDHAT_PCIE_DOWNSTREAM_MSI_SUPPORTED_FLAGS      PCI_MSI_FLAGS_64BIT
> > > +#define REDHAT_PCIE_DOWNSTREAM_MSI_NR_VECTOR            1
> > > +#define REDHAT_PCIE_DOWNSTREAM_SSVID_OFFSET             0x80
> > > +#define REDHAT_PCIE_DOWNSTREAM_SSVID_SVID               0
> > > +#define REDHAT_PCIE_DOWNSTREAM_SSVID_SSID               0
> > > +#define REDHAT_PCIE_DOWNSTREAM_EXP_OFFSET               0x90
> > > +#define REDHAT_PCIE_DOWNSTREAM_VENDOR_OFFSET            0xCC
> > > +#define REDHAT_PCIE_DOWNSTREAM_AER_OFFSET               0x100
> > > +
> > > +static void pcie_downstream_write_config(PCIDevice *d, uint32_t address,
> > > +                                         uint32_t val, int len)
> > > +{
> > > +    pci_bridge_write_config(d, address, val, len);
> > > +    pcie_cap_flr_write_config(d, address, val, len);
> > > +    pcie_cap_slot_write_config(d, address, val, len);
> > > +    pcie_aer_write_config(d, address, val, len);
> > > +}
> > > +
> > > +static void pcie_downstream_reset(DeviceState *qdev)
> > > +{
> > > +    PCIDevice *d = PCI_DEVICE(qdev);
> > > +
> > > +    pcie_cap_deverr_reset(d);
> > > +    pcie_cap_slot_reset(d);
> > > +    pcie_cap_arifwd_reset(d);
> > > +    pci_bridge_reset(qdev);
> > > +}
> > > +
> > > +static void pcie_downstream_realize(PCIDevice *d, Error **errp)
> > > +{
> > > +    PCIEPort *p = PCIE_PORT(d);
> > > +    PCIESlot *s = PCIE_SLOT(d);
> > > +    int rc;
> > > +
> > > +    pci_bridge_initfn(d, TYPE_PCIE_BUS);
> > > +    pcie_port_init_reg(d);
> > > +
> > > +    rc = pci_bridge_vendor_init(d, REDHAT_PCIE_DOWNSTREAM_VENDOR_OFFSET,
> > > +            PCI_DEVICE_ID_REDHAT_DOWNPORT_FAILOVER, errp);
> > > +    if (rc < 0) {
> > > +        error_append_hint(errp, "Can't init group ID, error %d\n", rc);
> > > +        goto err_bridge;
> > > +    }
> > > +
> > > +    rc = msi_init(d, REDHAT_PCIE_DOWNSTREAM_MSI_OFFSET,
> > > +            REDHAT_PCIE_DOWNSTREAM_MSI_NR_VECTOR,
> > > +            REDHAT_PCIE_DOWNSTREAM_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_64BIT,
> > > +            REDHAT_PCIE_DOWNSTREAM_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_MASKBIT,
> > > +            errp);
> > > +    if (rc < 0) {
> > > +        assert(rc == -ENOTSUP);
> > > +        goto err_bridge;
> > > +    }
> > > +
> > > +    rc = pci_bridge_ssvid_init(d, REDHAT_PCIE_DOWNSTREAM_SSVID_OFFSET,
> > > +            REDHAT_PCIE_DOWNSTREAM_SSVID_SVID,
> > > +            REDHAT_PCIE_DOWNSTREAM_SSVID_SSID, errp);
> > > +    if (rc < 0) {
> > > +        goto err_bridge;
> > > +    }
> > > +
> > > +    rc = pcie_cap_init(d, REDHAT_PCIE_DOWNSTREAM_EXP_OFFSET,
> > > +            PCI_EXP_TYPE_DOWNSTREAM, p->port, errp);
> > > +    if (rc < 0) {
> > > +        goto err_msi;
> > > +    }
> > > +    pcie_cap_flr_init(d);
> > > +    pcie_cap_deverr_init(d);
> > > +    pcie_cap_slot_init(d, s->slot);
> > > +    pcie_cap_arifwd_init(d);
> > > +
> > > +    pcie_chassis_create(s->chassis);
> > > +    rc = pcie_chassis_add_slot(s);
> > > +    if (rc < 0) {
> > > +        error_setg(errp, "Can't add chassis slot, error %d", rc);
> > > +        goto err_pcie_cap;
> > > +    }
> > > +
> > > +    rc = pcie_aer_init(d, PCI_ERR_VER, REDHAT_PCIE_DOWNSTREAM_AER_OFFSET,
> > > +            PCI_ERR_SIZEOF, errp);
> > > +    if (rc < 0) {
> > > +        goto err;
> > > +    }
> > > +
> > > +    return;
> > > +
> > > +err:
> > > +    pcie_chassis_del_slot(s);
> > > +err_pcie_cap:
> > > +    pcie_cap_exit(d);
> > > +err_msi:
> > > +    msi_uninit(d);
> > > +err_bridge:
> > > +    pci_bridge_exitfn(d);
> > > +}
> > > +
> > > +static void pcie_downstream_exitfn(PCIDevice *d)
> > > +{
> > > +    PCIESlot *s = PCIE_SLOT(d);
> > > +
> > > +    pcie_aer_exit(d);
> > > +    pcie_chassis_del_slot(s);
> > > +    pcie_cap_exit(d);
> > > +    msi_uninit(d);
> > > +    pci_bridge_exitfn(d);
> > > +}
> > > +
> > > +PCIESlot *pcie_downstream_init(PCIBus *bus, int devfn, bool multifunction,
> > > +                               const char *bus_name, pci_map_irq_fn map_irq,
> > > +                               uint8_t port, uint8_t chassis, uint16_t slot)
> > > +{
> > > +    PCIDevice *d;
> > > +    PCIBridge *br;
> > > +    DeviceState *qdev;
> > > +
> > > +    d = pci_create_multifunction(bus, devfn, multifunction, "pcie-downstream");
> > > +    if (!d) {
> > > +        return NULL;
> > > +    }
> > > +    br = PCI_BRIDGE(d);
> > > +
> > > +    qdev = DEVICE(d);
> > > +    pci_bridge_map_irq(br, bus_name, map_irq);
> > > +    qdev_prop_set_uint8(qdev, "port", port);
> > > +    qdev_prop_set_uint8(qdev, "chassis", chassis);
> > > +    qdev_prop_set_uint16(qdev, "slot", slot);
> > > +    qdev_init_nofail(qdev);
> > > +
> > > +    return PCIE_SLOT(d);
> > > +}
> > > +
> > > +static Property pcie_downstream_props[] = {
> > > +    DEFINE_PROP_BIT(COMPAT_PROP_PCP, PCIDevice, cap_present,
> > > +            QEMU_PCIE_SLTCAP_PCP_BITNR, true),
> > > +    DEFINE_PROP_UINT64(COMPAT_PROP_FAILOVER_GROUP_ID,
> > > +            PCIDevice, failover_group_id, ULLONG_MAX),
> > > +    DEFINE_PROP_END_OF_LIST()
> > > +};
> > > +
> > > +static const VMStateDescription vmstate_pcie_ds = {
> > > +    .name = "pcie-downstream-port",
> > > +    .priority = MIG_PRI_PCI_BUS,
> > > +    .version_id = 1,
> > > +    .minimum_version_id = 1,
> > > +    .post_load = pcie_cap_slot_post_load,
> > > +    .fields = (VMStateField[]) {
> > > +        VMSTATE_PCI_DEVICE(parent_obj.parent_obj.parent_obj, PCIESlot),
> > > +        VMSTATE_STRUCT(parent_obj.parent_obj.parent_obj.exp.aer_log,
> > > +                       PCIESlot, 0, vmstate_pcie_aer_log, PCIEAERLog),
> > > +        VMSTATE_END_OF_LIST()
> > > +    }
> > > +};
> > > +
> > > +static void pcie_downstream_class_init(ObjectClass *klass, void *data)
> > > +{
> > > +    DeviceClass *dc = DEVICE_CLASS(klass);
> > > +    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
> > > +
> > > +    k->is_bridge = 1;
> > > +    k->config_write = pcie_downstream_write_config;
> > > +    k->realize = pcie_downstream_realize;
> > > +    k->exit = pcie_downstream_exitfn;
> > > +    k->vendor_id = PCI_VENDOR_ID_REDHAT;
> > > +    k->device_id = PCI_DEVICE_ID_REDHAT_DOWNPORT_FAILOVER;
> > > +    k->revision = REDHAT_PCIE_DOWNSTREAM_REVISION;
> > > +    set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
> > > +    dc->desc = "Red Hat PCIe Downstream Port";
> > > +    dc->reset = pcie_downstream_reset;
> > > +    dc->vmsd = &vmstate_pcie_ds;
> > > +    dc->props = pcie_downstream_props;
> > > +}
> > > +
> > > +static const TypeInfo pcie_downstream_info = {
> > > +    .name          = "pcie-downstream",
> > > +    .parent        = TYPE_PCIE_SLOT,
> > > +    .class_init    = pcie_downstream_class_init,
> > > +    .interfaces = (InterfaceInfo[]) {
> > > +        { INTERFACE_PCIE_DEVICE },
> > > +        { }
> > > +    },
> > > +};
> > > +
> > > +static void pcie_downstream_register_types(void)
> > > +{
> > > +    type_register_static(&pcie_downstream_info);
> > > +}
> > > +
> > > +type_init(pcie_downstream_register_types)
> > > diff --git a/hw/pci-bridge/pcie_downstream.h b/hw/pci-bridge/pcie_downstream.h
> > > new file mode 100644
> > > index 0000000000..a7f1aae4bb
> > > --- /dev/null
> > > +++ b/hw/pci-bridge/pcie_downstream.h
> > > @@ -0,0 +1,10 @@
> > > +#ifndef QEMU_PCIE_DOWNSTREAM_H
> > > +#define QEMU_PCIE_DOWNSTREAM_H
> > > +
> > > +#include "hw/pci/pcie_port.h"
> > > +
> > > +PCIESlot *pcie_downstream_init(PCIBus *bus, int devfn, bool multifunction,
> > > +        const char *bus_name, pci_map_irq_fn map_irq, uint8_t port,
> > > +        uint8_t chassis, uint16_t slot);
> > > +
> > > +#endif /* QEMU_PCIE_DOWNSTREAM_H */
> > > diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
> > > index bc38032761..bf04ef59f3 100644
> > > --- a/include/hw/pci/pci.h
> > > +++ b/include/hw/pci/pci.h
> > > @@ -103,6 +103,7 @@ extern bool pci_available;
> > >   #define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE        0x000e
> > >   #define PCI_DEVICE_ID_REDHAT_MDPY               0x000f
> > >   #define PCI_DEVICE_ID_REDHAT_BRIDGE_FAILOVER    0x0010
> > > +#define PCI_DEVICE_ID_REDHAT_DOWNPORT_FAILOVER  0x0011
> > >   #define PCI_DEVICE_ID_REDHAT_QXL                0x0100
> > >   #define FMT_PCIBUS                      PRIx64
> > > 
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
> > > For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
> > > 
> >
Marcel Apfelbaum July 31, 2018, 7:11 p.m. UTC | #4
On 07/31/2018 07:03 PM, Michael S. Tsirkin wrote:
> On Tue, Jul 31, 2018 at 10:58:37AM -0500, Venu Busireddy wrote:
>> On 2018-07-07 15:14:11 +0300, Marcel Apfelbaum wrote:
>>> Hi Venu,
>>>
>>> On 06/30/2018 01:19 AM, Venu Busireddy wrote:
>>>> Add a new bridge device "pcie-downstream" with a
>>>> Vendor ID of PCI_VENDOR_ID_REDHAT and a Device ID of
>>>> PCI_DEVICE_ID_REDHAT_DOWNPORT_FAILOVER.
>>> Can't we use the current pcie-pci-bridge device (see
>>> hw/pci-bridge/pcie_pci_bridge.c)
>>> by adding the new vendor capability to it so we will not need to support a
>>> new bridge?
>> Sorry for the delayed response. I was away on vacation.
>>
>> This question is probably better answered by Michael, but me let me try.
>> Michael suggested adding a new device to avoid confusion with existing
>> bridge devices.
>>
>> Venu
> It's similar to the hotseat trick - dev id is easier to match against.

I understand, but even so, we can maybe use the current pcie-pci-brigde
as a base class and derive from it changing only the VENDOR/DEVICE ID
and adding the new properties, instead of a full implementation.

Only a suggestion, of course.

Thanks,
Marcel



>>> Thanks,
>>> Marcel
>>>
>>>>    Also, add the "Vendor-Specific"
>>>> capability to the bridge to contain the "Group Identifier" that will be
>>>> used to pair a virtio device with the passthrough device attached to
>>>> that bridge.
>>>>
>>>> This capability is added to the bridge iff the "failover-group-id"
>>>> option is specified for the bridge.
>>>>
>>>> Signed-off-by: Venu Busireddy <venu.busireddy@oracle.com>
>>>> ---
>>>>    default-configs/arm-softmmu.mak    |   1 +
>>>>    default-configs/i386-softmmu.mak   |   1 +
>>>>    default-configs/x86_64-softmmu.mak |   1 +
>>>>    hw/pci-bridge/Makefile.objs        |   1 +
>>>>    hw/pci-bridge/pcie_downstream.c    | 220 +++++++++++++++++++++++++++++
>>>>    hw/pci-bridge/pcie_downstream.h    |  10 ++
>>>>    include/hw/pci/pci.h               |   1 +
>>>>    7 files changed, 235 insertions(+)
>>>>    create mode 100644 hw/pci-bridge/pcie_downstream.c
>>>>    create mode 100644 hw/pci-bridge/pcie_downstream.h
>>>>
>>>> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
>>>> index 834d45cfaf..b86c6fb122 100644
>>>> --- a/default-configs/arm-softmmu.mak
>>>> +++ b/default-configs/arm-softmmu.mak
>>>> @@ -139,6 +139,7 @@ CONFIG_IMX_I2C=y
>>>>    CONFIG_PCIE_PORT=y
>>>>    CONFIG_XIO3130=y
>>>>    CONFIG_IOH3420=y
>>>> +CONFIG_PCIE_DOWNSTREAM=y
>>>>    CONFIG_I82801B11=y
>>>>    CONFIG_ACPI=y
>>>>    CONFIG_SMBIOS=y
>>>> diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
>>>> index 8c7d4a0fa0..a900c8f052 100644
>>>> --- a/default-configs/i386-softmmu.mak
>>>> +++ b/default-configs/i386-softmmu.mak
>>>> @@ -56,6 +56,7 @@ CONFIG_ACPI_NVDIMM=y
>>>>    CONFIG_PCIE_PORT=y
>>>>    CONFIG_XIO3130=y
>>>>    CONFIG_IOH3420=y
>>>> +CONFIG_PCIE_DOWNSTREAM=y
>>>>    CONFIG_I82801B11=y
>>>>    CONFIG_SMBIOS=y
>>>>    CONFIG_HYPERV_TESTDEV=$(CONFIG_KVM)
>>>> diff --git a/default-configs/x86_64-softmmu.mak b/default-configs/x86_64-softmmu.mak
>>>> index 0390b4303c..481e4764be 100644
>>>> --- a/default-configs/x86_64-softmmu.mak
>>>> +++ b/default-configs/x86_64-softmmu.mak
>>>> @@ -56,6 +56,7 @@ CONFIG_ACPI_NVDIMM=y
>>>>    CONFIG_PCIE_PORT=y
>>>>    CONFIG_XIO3130=y
>>>>    CONFIG_IOH3420=y
>>>> +CONFIG_PCIE_DOWNSTREAM=y
>>>>    CONFIG_I82801B11=y
>>>>    CONFIG_SMBIOS=y
>>>>    CONFIG_HYPERV_TESTDEV=$(CONFIG_KVM)
>>>> diff --git a/hw/pci-bridge/Makefile.objs b/hw/pci-bridge/Makefile.objs
>>>> index 47065f87d9..5b42212edc 100644
>>>> --- a/hw/pci-bridge/Makefile.objs
>>>> +++ b/hw/pci-bridge/Makefile.objs
>>>> @@ -3,6 +3,7 @@ common-obj-$(CONFIG_PCIE_PORT) += pcie_root_port.o gen_pcie_root_port.o pcie_pci
>>>>    common-obj-$(CONFIG_PXB) += pci_expander_bridge.o
>>>>    common-obj-$(CONFIG_XIO3130) += xio3130_upstream.o xio3130_downstream.o
>>>>    common-obj-$(CONFIG_IOH3420) += ioh3420.o
>>>> +common-obj-$(CONFIG_PCIE_DOWNSTREAM) += pcie_downstream.o
>>>>    common-obj-$(CONFIG_I82801B11) += i82801b11.o
>>>>    # NewWorld PowerMac
>>>>    common-obj-$(CONFIG_DEC_PCI) += dec.o
>>>> diff --git a/hw/pci-bridge/pcie_downstream.c b/hw/pci-bridge/pcie_downstream.c
>>>> new file mode 100644
>>>> index 0000000000..49b0d1e933
>>>> --- /dev/null
>>>> +++ b/hw/pci-bridge/pcie_downstream.c
>>>> @@ -0,0 +1,220 @@
>>>> +/*
>>>> + * Red Hat PCI Express downstream port.
>>>> + *
>>>> + * pcie_downstream.c
>>>> + * Most of this code is copied from xio3130_downstream.c
>>>> + *
>>>> + * Copyright (c) 2018 Oracle and/or its affiliates.
>>>> + *         Author: Venu Busireddy <venu.busireddy@oracle.com>
>>>> + *
>>>> + * This program is free software; you can redistribute it and/or modify
>>>> + * it under the terms of the GNU General Public License as published by
>>>> + * the Free Software Foundation; either version 2 of the License, or
>>>> + * (at your option) any later version.
>>>> + *
>>>> + * This program is distributed in the hope that it will be useful,
>>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>>> + * GNU General Public License for more details.
>>>> + *
>>>> + * You should have received a copy of the GNU General Public License along
>>>> + * with this program; if not, see <http://www.gnu.org/licenses/>.
>>>> + */
>>>> +
>>>> +#include "qemu/osdep.h"
>>>> +#include "hw/pci/pci_ids.h"
>>>> +#include "hw/pci/msi.h"
>>>> +#include "hw/pci/pcie.h"
>>>> +#include "pcie_downstream.h"
>>>> +#include "qapi/error.h"
>>>> +
>>>> +#define REDHAT_PCIE_DOWNSTREAM_REVISION                 0x1
>>>> +#define REDHAT_PCIE_DOWNSTREAM_MSI_OFFSET               0x70
>>>> +#define REDHAT_PCIE_DOWNSTREAM_MSI_SUPPORTED_FLAGS      PCI_MSI_FLAGS_64BIT
>>>> +#define REDHAT_PCIE_DOWNSTREAM_MSI_NR_VECTOR            1
>>>> +#define REDHAT_PCIE_DOWNSTREAM_SSVID_OFFSET             0x80
>>>> +#define REDHAT_PCIE_DOWNSTREAM_SSVID_SVID               0
>>>> +#define REDHAT_PCIE_DOWNSTREAM_SSVID_SSID               0
>>>> +#define REDHAT_PCIE_DOWNSTREAM_EXP_OFFSET               0x90
>>>> +#define REDHAT_PCIE_DOWNSTREAM_VENDOR_OFFSET            0xCC
>>>> +#define REDHAT_PCIE_DOWNSTREAM_AER_OFFSET               0x100
>>>> +
>>>> +static void pcie_downstream_write_config(PCIDevice *d, uint32_t address,
>>>> +                                         uint32_t val, int len)
>>>> +{
>>>> +    pci_bridge_write_config(d, address, val, len);
>>>> +    pcie_cap_flr_write_config(d, address, val, len);
>>>> +    pcie_cap_slot_write_config(d, address, val, len);
>>>> +    pcie_aer_write_config(d, address, val, len);
>>>> +}
>>>> +
>>>> +static void pcie_downstream_reset(DeviceState *qdev)
>>>> +{
>>>> +    PCIDevice *d = PCI_DEVICE(qdev);
>>>> +
>>>> +    pcie_cap_deverr_reset(d);
>>>> +    pcie_cap_slot_reset(d);
>>>> +    pcie_cap_arifwd_reset(d);
>>>> +    pci_bridge_reset(qdev);
>>>> +}
>>>> +
>>>> +static void pcie_downstream_realize(PCIDevice *d, Error **errp)
>>>> +{
>>>> +    PCIEPort *p = PCIE_PORT(d);
>>>> +    PCIESlot *s = PCIE_SLOT(d);
>>>> +    int rc;
>>>> +
>>>> +    pci_bridge_initfn(d, TYPE_PCIE_BUS);
>>>> +    pcie_port_init_reg(d);
>>>> +
>>>> +    rc = pci_bridge_vendor_init(d, REDHAT_PCIE_DOWNSTREAM_VENDOR_OFFSET,
>>>> +            PCI_DEVICE_ID_REDHAT_DOWNPORT_FAILOVER, errp);
>>>> +    if (rc < 0) {
>>>> +        error_append_hint(errp, "Can't init group ID, error %d\n", rc);
>>>> +        goto err_bridge;
>>>> +    }
>>>> +
>>>> +    rc = msi_init(d, REDHAT_PCIE_DOWNSTREAM_MSI_OFFSET,
>>>> +            REDHAT_PCIE_DOWNSTREAM_MSI_NR_VECTOR,
>>>> +            REDHAT_PCIE_DOWNSTREAM_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_64BIT,
>>>> +            REDHAT_PCIE_DOWNSTREAM_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_MASKBIT,
>>>> +            errp);
>>>> +    if (rc < 0) {
>>>> +        assert(rc == -ENOTSUP);
>>>> +        goto err_bridge;
>>>> +    }
>>>> +
>>>> +    rc = pci_bridge_ssvid_init(d, REDHAT_PCIE_DOWNSTREAM_SSVID_OFFSET,
>>>> +            REDHAT_PCIE_DOWNSTREAM_SSVID_SVID,
>>>> +            REDHAT_PCIE_DOWNSTREAM_SSVID_SSID, errp);
>>>> +    if (rc < 0) {
>>>> +        goto err_bridge;
>>>> +    }
>>>> +
>>>> +    rc = pcie_cap_init(d, REDHAT_PCIE_DOWNSTREAM_EXP_OFFSET,
>>>> +            PCI_EXP_TYPE_DOWNSTREAM, p->port, errp);
>>>> +    if (rc < 0) {
>>>> +        goto err_msi;
>>>> +    }
>>>> +    pcie_cap_flr_init(d);
>>>> +    pcie_cap_deverr_init(d);
>>>> +    pcie_cap_slot_init(d, s->slot);
>>>> +    pcie_cap_arifwd_init(d);
>>>> +
>>>> +    pcie_chassis_create(s->chassis);
>>>> +    rc = pcie_chassis_add_slot(s);
>>>> +    if (rc < 0) {
>>>> +        error_setg(errp, "Can't add chassis slot, error %d", rc);
>>>> +        goto err_pcie_cap;
>>>> +    }
>>>> +
>>>> +    rc = pcie_aer_init(d, PCI_ERR_VER, REDHAT_PCIE_DOWNSTREAM_AER_OFFSET,
>>>> +            PCI_ERR_SIZEOF, errp);
>>>> +    if (rc < 0) {
>>>> +        goto err;
>>>> +    }
>>>> +
>>>> +    return;
>>>> +
>>>> +err:
>>>> +    pcie_chassis_del_slot(s);
>>>> +err_pcie_cap:
>>>> +    pcie_cap_exit(d);
>>>> +err_msi:
>>>> +    msi_uninit(d);
>>>> +err_bridge:
>>>> +    pci_bridge_exitfn(d);
>>>> +}
>>>> +
>>>> +static void pcie_downstream_exitfn(PCIDevice *d)
>>>> +{
>>>> +    PCIESlot *s = PCIE_SLOT(d);
>>>> +
>>>> +    pcie_aer_exit(d);
>>>> +    pcie_chassis_del_slot(s);
>>>> +    pcie_cap_exit(d);
>>>> +    msi_uninit(d);
>>>> +    pci_bridge_exitfn(d);
>>>> +}
>>>> +
>>>> +PCIESlot *pcie_downstream_init(PCIBus *bus, int devfn, bool multifunction,
>>>> +                               const char *bus_name, pci_map_irq_fn map_irq,
>>>> +                               uint8_t port, uint8_t chassis, uint16_t slot)
>>>> +{
>>>> +    PCIDevice *d;
>>>> +    PCIBridge *br;
>>>> +    DeviceState *qdev;
>>>> +
>>>> +    d = pci_create_multifunction(bus, devfn, multifunction, "pcie-downstream");
>>>> +    if (!d) {
>>>> +        return NULL;
>>>> +    }
>>>> +    br = PCI_BRIDGE(d);
>>>> +
>>>> +    qdev = DEVICE(d);
>>>> +    pci_bridge_map_irq(br, bus_name, map_irq);
>>>> +    qdev_prop_set_uint8(qdev, "port", port);
>>>> +    qdev_prop_set_uint8(qdev, "chassis", chassis);
>>>> +    qdev_prop_set_uint16(qdev, "slot", slot);
>>>> +    qdev_init_nofail(qdev);
>>>> +
>>>> +    return PCIE_SLOT(d);
>>>> +}
>>>> +
>>>> +static Property pcie_downstream_props[] = {
>>>> +    DEFINE_PROP_BIT(COMPAT_PROP_PCP, PCIDevice, cap_present,
>>>> +            QEMU_PCIE_SLTCAP_PCP_BITNR, true),
>>>> +    DEFINE_PROP_UINT64(COMPAT_PROP_FAILOVER_GROUP_ID,
>>>> +            PCIDevice, failover_group_id, ULLONG_MAX),
>>>> +    DEFINE_PROP_END_OF_LIST()
>>>> +};
>>>> +
>>>> +static const VMStateDescription vmstate_pcie_ds = {
>>>> +    .name = "pcie-downstream-port",
>>>> +    .priority = MIG_PRI_PCI_BUS,
>>>> +    .version_id = 1,
>>>> +    .minimum_version_id = 1,
>>>> +    .post_load = pcie_cap_slot_post_load,
>>>> +    .fields = (VMStateField[]) {
>>>> +        VMSTATE_PCI_DEVICE(parent_obj.parent_obj.parent_obj, PCIESlot),
>>>> +        VMSTATE_STRUCT(parent_obj.parent_obj.parent_obj.exp.aer_log,
>>>> +                       PCIESlot, 0, vmstate_pcie_aer_log, PCIEAERLog),
>>>> +        VMSTATE_END_OF_LIST()
>>>> +    }
>>>> +};
>>>> +
>>>> +static void pcie_downstream_class_init(ObjectClass *klass, void *data)
>>>> +{
>>>> +    DeviceClass *dc = DEVICE_CLASS(klass);
>>>> +    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
>>>> +
>>>> +    k->is_bridge = 1;
>>>> +    k->config_write = pcie_downstream_write_config;
>>>> +    k->realize = pcie_downstream_realize;
>>>> +    k->exit = pcie_downstream_exitfn;
>>>> +    k->vendor_id = PCI_VENDOR_ID_REDHAT;
>>>> +    k->device_id = PCI_DEVICE_ID_REDHAT_DOWNPORT_FAILOVER;
>>>> +    k->revision = REDHAT_PCIE_DOWNSTREAM_REVISION;
>>>> +    set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
>>>> +    dc->desc = "Red Hat PCIe Downstream Port";
>>>> +    dc->reset = pcie_downstream_reset;
>>>> +    dc->vmsd = &vmstate_pcie_ds;
>>>> +    dc->props = pcie_downstream_props;
>>>> +}
>>>> +
>>>> +static const TypeInfo pcie_downstream_info = {
>>>> +    .name          = "pcie-downstream",
>>>> +    .parent        = TYPE_PCIE_SLOT,
>>>> +    .class_init    = pcie_downstream_class_init,
>>>> +    .interfaces = (InterfaceInfo[]) {
>>>> +        { INTERFACE_PCIE_DEVICE },
>>>> +        { }
>>>> +    },
>>>> +};
>>>> +
>>>> +static void pcie_downstream_register_types(void)
>>>> +{
>>>> +    type_register_static(&pcie_downstream_info);
>>>> +}
>>>> +
>>>> +type_init(pcie_downstream_register_types)
>>>> diff --git a/hw/pci-bridge/pcie_downstream.h b/hw/pci-bridge/pcie_downstream.h
>>>> new file mode 100644
>>>> index 0000000000..a7f1aae4bb
>>>> --- /dev/null
>>>> +++ b/hw/pci-bridge/pcie_downstream.h
>>>> @@ -0,0 +1,10 @@
>>>> +#ifndef QEMU_PCIE_DOWNSTREAM_H
>>>> +#define QEMU_PCIE_DOWNSTREAM_H
>>>> +
>>>> +#include "hw/pci/pcie_port.h"
>>>> +
>>>> +PCIESlot *pcie_downstream_init(PCIBus *bus, int devfn, bool multifunction,
>>>> +        const char *bus_name, pci_map_irq_fn map_irq, uint8_t port,
>>>> +        uint8_t chassis, uint16_t slot);
>>>> +
>>>> +#endif /* QEMU_PCIE_DOWNSTREAM_H */
>>>> diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
>>>> index bc38032761..bf04ef59f3 100644
>>>> --- a/include/hw/pci/pci.h
>>>> +++ b/include/hw/pci/pci.h
>>>> @@ -103,6 +103,7 @@ extern bool pci_available;
>>>>    #define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE        0x000e
>>>>    #define PCI_DEVICE_ID_REDHAT_MDPY               0x000f
>>>>    #define PCI_DEVICE_ID_REDHAT_BRIDGE_FAILOVER    0x0010
>>>> +#define PCI_DEVICE_ID_REDHAT_DOWNPORT_FAILOVER  0x0011
>>>>    #define PCI_DEVICE_ID_REDHAT_QXL                0x0100
>>>>    #define FMT_PCIBUS                      PRIx64
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
>>>> For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
>>>>
diff mbox

Patch

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 834d45cfaf..b86c6fb122 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -139,6 +139,7 @@  CONFIG_IMX_I2C=y
 CONFIG_PCIE_PORT=y
 CONFIG_XIO3130=y
 CONFIG_IOH3420=y
+CONFIG_PCIE_DOWNSTREAM=y
 CONFIG_I82801B11=y
 CONFIG_ACPI=y
 CONFIG_SMBIOS=y
diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
index 8c7d4a0fa0..a900c8f052 100644
--- a/default-configs/i386-softmmu.mak
+++ b/default-configs/i386-softmmu.mak
@@ -56,6 +56,7 @@  CONFIG_ACPI_NVDIMM=y
 CONFIG_PCIE_PORT=y
 CONFIG_XIO3130=y
 CONFIG_IOH3420=y
+CONFIG_PCIE_DOWNSTREAM=y
 CONFIG_I82801B11=y
 CONFIG_SMBIOS=y
 CONFIG_HYPERV_TESTDEV=$(CONFIG_KVM)
diff --git a/default-configs/x86_64-softmmu.mak b/default-configs/x86_64-softmmu.mak
index 0390b4303c..481e4764be 100644
--- a/default-configs/x86_64-softmmu.mak
+++ b/default-configs/x86_64-softmmu.mak
@@ -56,6 +56,7 @@  CONFIG_ACPI_NVDIMM=y
 CONFIG_PCIE_PORT=y
 CONFIG_XIO3130=y
 CONFIG_IOH3420=y
+CONFIG_PCIE_DOWNSTREAM=y
 CONFIG_I82801B11=y
 CONFIG_SMBIOS=y
 CONFIG_HYPERV_TESTDEV=$(CONFIG_KVM)
diff --git a/hw/pci-bridge/Makefile.objs b/hw/pci-bridge/Makefile.objs
index 47065f87d9..5b42212edc 100644
--- a/hw/pci-bridge/Makefile.objs
+++ b/hw/pci-bridge/Makefile.objs
@@ -3,6 +3,7 @@  common-obj-$(CONFIG_PCIE_PORT) += pcie_root_port.o gen_pcie_root_port.o pcie_pci
 common-obj-$(CONFIG_PXB) += pci_expander_bridge.o
 common-obj-$(CONFIG_XIO3130) += xio3130_upstream.o xio3130_downstream.o
 common-obj-$(CONFIG_IOH3420) += ioh3420.o
+common-obj-$(CONFIG_PCIE_DOWNSTREAM) += pcie_downstream.o
 common-obj-$(CONFIG_I82801B11) += i82801b11.o
 # NewWorld PowerMac
 common-obj-$(CONFIG_DEC_PCI) += dec.o
diff --git a/hw/pci-bridge/pcie_downstream.c b/hw/pci-bridge/pcie_downstream.c
new file mode 100644
index 0000000000..49b0d1e933
--- /dev/null
+++ b/hw/pci-bridge/pcie_downstream.c
@@ -0,0 +1,220 @@ 
+/*
+ * Red Hat PCI Express downstream port.
+ *
+ * pcie_downstream.c
+ * Most of this code is copied from xio3130_downstream.c
+ *
+ * Copyright (c) 2018 Oracle and/or its affiliates.
+ *         Author: Venu Busireddy <venu.busireddy@oracle.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/pci/pci_ids.h"
+#include "hw/pci/msi.h"
+#include "hw/pci/pcie.h"
+#include "pcie_downstream.h"
+#include "qapi/error.h"
+
+#define REDHAT_PCIE_DOWNSTREAM_REVISION                 0x1
+#define REDHAT_PCIE_DOWNSTREAM_MSI_OFFSET               0x70
+#define REDHAT_PCIE_DOWNSTREAM_MSI_SUPPORTED_FLAGS      PCI_MSI_FLAGS_64BIT
+#define REDHAT_PCIE_DOWNSTREAM_MSI_NR_VECTOR            1
+#define REDHAT_PCIE_DOWNSTREAM_SSVID_OFFSET             0x80
+#define REDHAT_PCIE_DOWNSTREAM_SSVID_SVID               0
+#define REDHAT_PCIE_DOWNSTREAM_SSVID_SSID               0
+#define REDHAT_PCIE_DOWNSTREAM_EXP_OFFSET               0x90
+#define REDHAT_PCIE_DOWNSTREAM_VENDOR_OFFSET            0xCC
+#define REDHAT_PCIE_DOWNSTREAM_AER_OFFSET               0x100
+
+static void pcie_downstream_write_config(PCIDevice *d, uint32_t address,
+                                         uint32_t val, int len)
+{
+    pci_bridge_write_config(d, address, val, len);
+    pcie_cap_flr_write_config(d, address, val, len);
+    pcie_cap_slot_write_config(d, address, val, len);
+    pcie_aer_write_config(d, address, val, len);
+}
+
+static void pcie_downstream_reset(DeviceState *qdev)
+{
+    PCIDevice *d = PCI_DEVICE(qdev);
+
+    pcie_cap_deverr_reset(d);
+    pcie_cap_slot_reset(d);
+    pcie_cap_arifwd_reset(d);
+    pci_bridge_reset(qdev);
+}
+
+static void pcie_downstream_realize(PCIDevice *d, Error **errp)
+{
+    PCIEPort *p = PCIE_PORT(d);
+    PCIESlot *s = PCIE_SLOT(d);
+    int rc;
+
+    pci_bridge_initfn(d, TYPE_PCIE_BUS);
+    pcie_port_init_reg(d);
+
+    rc = pci_bridge_vendor_init(d, REDHAT_PCIE_DOWNSTREAM_VENDOR_OFFSET,
+            PCI_DEVICE_ID_REDHAT_DOWNPORT_FAILOVER, errp);
+    if (rc < 0) {
+        error_append_hint(errp, "Can't init group ID, error %d\n", rc);
+        goto err_bridge;
+    }
+
+    rc = msi_init(d, REDHAT_PCIE_DOWNSTREAM_MSI_OFFSET,
+            REDHAT_PCIE_DOWNSTREAM_MSI_NR_VECTOR,
+            REDHAT_PCIE_DOWNSTREAM_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_64BIT,
+            REDHAT_PCIE_DOWNSTREAM_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_MASKBIT,
+            errp);
+    if (rc < 0) {
+        assert(rc == -ENOTSUP);
+        goto err_bridge;
+    }
+
+    rc = pci_bridge_ssvid_init(d, REDHAT_PCIE_DOWNSTREAM_SSVID_OFFSET,
+            REDHAT_PCIE_DOWNSTREAM_SSVID_SVID,
+            REDHAT_PCIE_DOWNSTREAM_SSVID_SSID, errp);
+    if (rc < 0) {
+        goto err_bridge;
+    }
+
+    rc = pcie_cap_init(d, REDHAT_PCIE_DOWNSTREAM_EXP_OFFSET,
+            PCI_EXP_TYPE_DOWNSTREAM, p->port, errp);
+    if (rc < 0) {
+        goto err_msi;
+    }
+    pcie_cap_flr_init(d);
+    pcie_cap_deverr_init(d);
+    pcie_cap_slot_init(d, s->slot);
+    pcie_cap_arifwd_init(d);
+
+    pcie_chassis_create(s->chassis);
+    rc = pcie_chassis_add_slot(s);
+    if (rc < 0) {
+        error_setg(errp, "Can't add chassis slot, error %d", rc);
+        goto err_pcie_cap;
+    }
+
+    rc = pcie_aer_init(d, PCI_ERR_VER, REDHAT_PCIE_DOWNSTREAM_AER_OFFSET,
+            PCI_ERR_SIZEOF, errp);
+    if (rc < 0) {
+        goto err;
+    }
+
+    return;
+
+err:
+    pcie_chassis_del_slot(s);
+err_pcie_cap:
+    pcie_cap_exit(d);
+err_msi:
+    msi_uninit(d);
+err_bridge:
+    pci_bridge_exitfn(d);
+}
+
+static void pcie_downstream_exitfn(PCIDevice *d)
+{
+    PCIESlot *s = PCIE_SLOT(d);
+
+    pcie_aer_exit(d);
+    pcie_chassis_del_slot(s);
+    pcie_cap_exit(d);
+    msi_uninit(d);
+    pci_bridge_exitfn(d);
+}
+
+PCIESlot *pcie_downstream_init(PCIBus *bus, int devfn, bool multifunction,
+                               const char *bus_name, pci_map_irq_fn map_irq,
+                               uint8_t port, uint8_t chassis, uint16_t slot)
+{
+    PCIDevice *d;
+    PCIBridge *br;
+    DeviceState *qdev;
+
+    d = pci_create_multifunction(bus, devfn, multifunction, "pcie-downstream");
+    if (!d) {
+        return NULL;
+    }
+    br = PCI_BRIDGE(d);
+
+    qdev = DEVICE(d);
+    pci_bridge_map_irq(br, bus_name, map_irq);
+    qdev_prop_set_uint8(qdev, "port", port);
+    qdev_prop_set_uint8(qdev, "chassis", chassis);
+    qdev_prop_set_uint16(qdev, "slot", slot);
+    qdev_init_nofail(qdev);
+
+    return PCIE_SLOT(d);
+}
+
+static Property pcie_downstream_props[] = {
+    DEFINE_PROP_BIT(COMPAT_PROP_PCP, PCIDevice, cap_present,
+            QEMU_PCIE_SLTCAP_PCP_BITNR, true),
+    DEFINE_PROP_UINT64(COMPAT_PROP_FAILOVER_GROUP_ID,
+            PCIDevice, failover_group_id, ULLONG_MAX),
+    DEFINE_PROP_END_OF_LIST()
+};
+
+static const VMStateDescription vmstate_pcie_ds = {
+    .name = "pcie-downstream-port",
+    .priority = MIG_PRI_PCI_BUS,
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .post_load = pcie_cap_slot_post_load,
+    .fields = (VMStateField[]) {
+        VMSTATE_PCI_DEVICE(parent_obj.parent_obj.parent_obj, PCIESlot),
+        VMSTATE_STRUCT(parent_obj.parent_obj.parent_obj.exp.aer_log,
+                       PCIESlot, 0, vmstate_pcie_aer_log, PCIEAERLog),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void pcie_downstream_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+    k->is_bridge = 1;
+    k->config_write = pcie_downstream_write_config;
+    k->realize = pcie_downstream_realize;
+    k->exit = pcie_downstream_exitfn;
+    k->vendor_id = PCI_VENDOR_ID_REDHAT;
+    k->device_id = PCI_DEVICE_ID_REDHAT_DOWNPORT_FAILOVER;
+    k->revision = REDHAT_PCIE_DOWNSTREAM_REVISION;
+    set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
+    dc->desc = "Red Hat PCIe Downstream Port";
+    dc->reset = pcie_downstream_reset;
+    dc->vmsd = &vmstate_pcie_ds;
+    dc->props = pcie_downstream_props;
+}
+
+static const TypeInfo pcie_downstream_info = {
+    .name          = "pcie-downstream",
+    .parent        = TYPE_PCIE_SLOT,
+    .class_init    = pcie_downstream_class_init,
+    .interfaces = (InterfaceInfo[]) {
+        { INTERFACE_PCIE_DEVICE },
+        { }
+    },
+};
+
+static void pcie_downstream_register_types(void)
+{
+    type_register_static(&pcie_downstream_info);
+}
+
+type_init(pcie_downstream_register_types)
diff --git a/hw/pci-bridge/pcie_downstream.h b/hw/pci-bridge/pcie_downstream.h
new file mode 100644
index 0000000000..a7f1aae4bb
--- /dev/null
+++ b/hw/pci-bridge/pcie_downstream.h
@@ -0,0 +1,10 @@ 
+#ifndef QEMU_PCIE_DOWNSTREAM_H
+#define QEMU_PCIE_DOWNSTREAM_H
+
+#include "hw/pci/pcie_port.h"
+
+PCIESlot *pcie_downstream_init(PCIBus *bus, int devfn, bool multifunction,
+        const char *bus_name, pci_map_irq_fn map_irq, uint8_t port,
+        uint8_t chassis, uint16_t slot);
+
+#endif /* QEMU_PCIE_DOWNSTREAM_H */
diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
index bc38032761..bf04ef59f3 100644
--- a/include/hw/pci/pci.h
+++ b/include/hw/pci/pci.h
@@ -103,6 +103,7 @@  extern bool pci_available;
 #define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE        0x000e
 #define PCI_DEVICE_ID_REDHAT_MDPY               0x000f
 #define PCI_DEVICE_ID_REDHAT_BRIDGE_FAILOVER    0x0010
+#define PCI_DEVICE_ID_REDHAT_DOWNPORT_FAILOVER  0x0011
 #define PCI_DEVICE_ID_REDHAT_QXL                0x0100
 
 #define FMT_PCIBUS                      PRIx64