diff mbox series

[v8,1/3] dmaengine: fsl-edma: extract common fsl-edma code (no changes in behavior intended)

Message ID 20180803193244.12084-1-angelo@sysam.it (mailing list archive)
State Superseded
Headers show
Series [v8,1/3] dmaengine: fsl-edma: extract common fsl-edma code (no changes in behavior intended) | expand

Commit Message

Angelo Dureghello Aug. 3, 2018, 7:32 p.m. UTC
This patch adds a new fsl-edma-common module to allow new
mcf-edma module code to use most of the fsl-edma code.

Signed-off-by: Angelo Dureghello <angelo@sysam.it>
---
Changes for v2:
- patch splitted into 4
- add mcf-edma as minimal different parts from fsl-edma

Changes for v3:
none

Changes for v4:
- patch simplified from 4/4 into 2/2
- collecting all the mcf-edma-related changes

Changes for v5:
none

Changes for v6:
- adjusted comment header
- fixed bit shift with BIT()
- we need to free the interrupts at remove(), so removed all devm_
  interrupt related calls

Changes for v7:
none

Changes for v8:
- patch rewritten from scratch, splitted into 3, common code isolated,
  minimal changes from the original Freescale code have been done.
  The patch has been tested with both Iris + Colibri Vybrid VF50 and
  stmark2/mcf54415 Coldfire boards.
---
 drivers/dma/Makefile          |   2 +-
 drivers/dma/fsl-edma-common.c | 576 ++++++++++++++++++++++++++++
 drivers/dma/fsl-edma-common.h | 196 ++++++++++
 drivers/dma/fsl-edma.c        | 697 +---------------------------------
 4 files changed, 774 insertions(+), 697 deletions(-)
 create mode 100644 drivers/dma/fsl-edma-common.c
 create mode 100644 drivers/dma/fsl-edma-common.h

Comments

Krzysztof Kozlowski Aug. 6, 2018, 7:43 a.m. UTC | #1
On 3 August 2018 at 21:32, Angelo Dureghello <angelo@sysam.it> wrote:
> This patch adds a new fsl-edma-common module to allow new
> mcf-edma module code to use most of the fsl-edma code.
>
> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
> ---
> Changes for v2:
> - patch splitted into 4
> - add mcf-edma as minimal different parts from fsl-edma
>
> Changes for v3:
> none
>
> Changes for v4:
> - patch simplified from 4/4 into 2/2
> - collecting all the mcf-edma-related changes
>
> Changes for v5:
> none
>
> Changes for v6:
> - adjusted comment header
> - fixed bit shift with BIT()
> - we need to free the interrupts at remove(), so removed all devm_
>   interrupt related calls
>
> Changes for v7:
> none
>
> Changes for v8:
> - patch rewritten from scratch, splitted into 3, common code isolated,
>   minimal changes from the original Freescale code have been done.
>   The patch has been tested with both Iris + Colibri Vybrid VF50 and
>   stmark2/mcf54415 Coldfire boards.
> ---
>  drivers/dma/Makefile          |   2 +-
>  drivers/dma/fsl-edma-common.c | 576 ++++++++++++++++++++++++++++
>  drivers/dma/fsl-edma-common.h | 196 ++++++++++
>  drivers/dma/fsl-edma.c        | 697 +---------------------------------
>  4 files changed, 774 insertions(+), 697 deletions(-)
>  create mode 100644 drivers/dma/fsl-edma-common.c
>  create mode 100644 drivers/dma/fsl-edma-common.h
>
> diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
> index 203a99d68315..66022f59fca4 100644
> --- a/drivers/dma/Makefile
> +++ b/drivers/dma/Makefile
> @@ -31,7 +31,7 @@ obj-$(CONFIG_DW_AXI_DMAC) += dw-axi-dmac/
>  obj-$(CONFIG_DW_DMAC_CORE) += dw/
>  obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
>  obj-$(CONFIG_FSL_DMA) += fsldma.o
> -obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
> +obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
>  obj-$(CONFIG_FSL_RAID) += fsl_raid.o
>  obj-$(CONFIG_HSU_DMA) += hsu/
>  obj-$(CONFIG_IMG_MDC_DMA) += img-mdc-dma.o
> diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
> new file mode 100644
> index 000000000000..0ae7094f477a
> --- /dev/null
> +++ b/drivers/dma/fsl-edma-common.c
> @@ -0,0 +1,576 @@
> +// SPDX-License-Identifier: GPL-2.0

You moved code from fsl-edma.c which is licensed on GPL-2.0+. I think
that's not allowed as you effectively relicense the work on new
license.

Tested-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof

> +//
> +// Copyright (c) 2013-2014 Freescale Semiconductor, Inc
> +// Copyright (c) 2017 Sysam, Angelo Dureghello  <angelo@sysam.it>
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Angelo Dureghello Aug. 6, 2018, 8:40 p.m. UTC | #2
Hi Krzysztof,

On Mon, Aug 06, 2018 at 09:43:42AM +0200, Krzysztof Kozlowski wrote:
> On 3 August 2018 at 21:32, Angelo Dureghello <angelo@sysam.it> wrote:
> > This patch adds a new fsl-edma-common module to allow new
> > mcf-edma module code to use most of the fsl-edma code.
> >
> > Signed-off-by: Angelo Dureghello <angelo@sysam.it>
> > ---
> > Changes for v2:
> > - patch splitted into 4
> > - add mcf-edma as minimal different parts from fsl-edma
> >
> > Changes for v3:
> > none
> >
> > Changes for v4:
> > - patch simplified from 4/4 into 2/2
> > - collecting all the mcf-edma-related changes
> >
> > Changes for v5:
> > none
> >
> > Changes for v6:
> > - adjusted comment header
> > - fixed bit shift with BIT()
> > - we need to free the interrupts at remove(), so removed all devm_
> >   interrupt related calls
> >
> > Changes for v7:
> > none
> >
> > Changes for v8:
> > - patch rewritten from scratch, splitted into 3, common code isolated,
> >   minimal changes from the original Freescale code have been done.
> >   The patch has been tested with both Iris + Colibri Vybrid VF50 and
> >   stmark2/mcf54415 Coldfire boards.
> > ---
> >  drivers/dma/Makefile          |   2 +-
> >  drivers/dma/fsl-edma-common.c | 576 ++++++++++++++++++++++++++++
> >  drivers/dma/fsl-edma-common.h | 196 ++++++++++
> >  drivers/dma/fsl-edma.c        | 697 +---------------------------------
> >  4 files changed, 774 insertions(+), 697 deletions(-)
> >  create mode 100644 drivers/dma/fsl-edma-common.c
> >  create mode 100644 drivers/dma/fsl-edma-common.h
> >
> > diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
> > index 203a99d68315..66022f59fca4 100644
> > --- a/drivers/dma/Makefile
> > +++ b/drivers/dma/Makefile
> > @@ -31,7 +31,7 @@ obj-$(CONFIG_DW_AXI_DMAC) += dw-axi-dmac/
> >  obj-$(CONFIG_DW_DMAC_CORE) += dw/
> >  obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
> >  obj-$(CONFIG_FSL_DMA) += fsldma.o
> > -obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
> > +obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
> >  obj-$(CONFIG_FSL_RAID) += fsl_raid.o
> >  obj-$(CONFIG_HSU_DMA) += hsu/
> >  obj-$(CONFIG_IMG_MDC_DMA) += img-mdc-dma.o
> > diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
> > new file mode 100644
> > index 000000000000..0ae7094f477a
> > --- /dev/null
> > +++ b/drivers/dma/fsl-edma-common.c
> > @@ -0,0 +1,576 @@
> > +// SPDX-License-Identifier: GPL-2.0
> 
> You moved code from fsl-edma.c which is licensed on GPL-2.0+. I think
> that's not allowed as you effectively relicense the work on new
> license.
> 
Ok, so if i undestrand, i should change that comment to
// SPDX-License-Identifier: GPL-2.0+
Right ?

> Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
> 
> Best regards,
> Krzysztof
>

Best regards,
Angelo
 
> > +//
> > +// Copyright (c) 2013-2014 Freescale Semiconductor, Inc
> > +// Copyright (c) 2017 Sysam, Angelo Dureghello  <angelo@sysam.it>
> --
> To unsubscribe from this list: send the line "unsubscribe dmaengine" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Krzysztof Kozlowski Aug. 7, 2018, 6:02 a.m. UTC | #3
On 6 August 2018 at 22:40, Angelo Dureghello <angelo@sysam.it> wrote:
> Hi Krzysztof,
>
> On Mon, Aug 06, 2018 at 09:43:42AM +0200, Krzysztof Kozlowski wrote:
>> On 3 August 2018 at 21:32, Angelo Dureghello <angelo@sysam.it> wrote:
>> > This patch adds a new fsl-edma-common module to allow new
>> > mcf-edma module code to use most of the fsl-edma code.
>> >
>> > Signed-off-by: Angelo Dureghello <angelo@sysam.it>
>> > ---
>> > Changes for v2:
>> > - patch splitted into 4
>> > - add mcf-edma as minimal different parts from fsl-edma
>> >
>> > Changes for v3:
>> > none
>> >
>> > Changes for v4:
>> > - patch simplified from 4/4 into 2/2
>> > - collecting all the mcf-edma-related changes
>> >
>> > Changes for v5:
>> > none
>> >
>> > Changes for v6:
>> > - adjusted comment header
>> > - fixed bit shift with BIT()
>> > - we need to free the interrupts at remove(), so removed all devm_
>> >   interrupt related calls
>> >
>> > Changes for v7:
>> > none
>> >
>> > Changes for v8:
>> > - patch rewritten from scratch, splitted into 3, common code isolated,
>> >   minimal changes from the original Freescale code have been done.
>> >   The patch has been tested with both Iris + Colibri Vybrid VF50 and
>> >   stmark2/mcf54415 Coldfire boards.
>> > ---
>> >  drivers/dma/Makefile          |   2 +-
>> >  drivers/dma/fsl-edma-common.c | 576 ++++++++++++++++++++++++++++
>> >  drivers/dma/fsl-edma-common.h | 196 ++++++++++
>> >  drivers/dma/fsl-edma.c        | 697 +---------------------------------
>> >  4 files changed, 774 insertions(+), 697 deletions(-)
>> >  create mode 100644 drivers/dma/fsl-edma-common.c
>> >  create mode 100644 drivers/dma/fsl-edma-common.h
>> >
>> > diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
>> > index 203a99d68315..66022f59fca4 100644
>> > --- a/drivers/dma/Makefile
>> > +++ b/drivers/dma/Makefile
>> > @@ -31,7 +31,7 @@ obj-$(CONFIG_DW_AXI_DMAC) += dw-axi-dmac/
>> >  obj-$(CONFIG_DW_DMAC_CORE) += dw/
>> >  obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
>> >  obj-$(CONFIG_FSL_DMA) += fsldma.o
>> > -obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
>> > +obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
>> >  obj-$(CONFIG_FSL_RAID) += fsl_raid.o
>> >  obj-$(CONFIG_HSU_DMA) += hsu/
>> >  obj-$(CONFIG_IMG_MDC_DMA) += img-mdc-dma.o
>> > diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
>> > new file mode 100644
>> > index 000000000000..0ae7094f477a
>> > --- /dev/null
>> > +++ b/drivers/dma/fsl-edma-common.c
>> > @@ -0,0 +1,576 @@
>> > +// SPDX-License-Identifier: GPL-2.0
>>
>> You moved code from fsl-edma.c which is licensed on GPL-2.0+. I think
>> that's not allowed as you effectively relicense the work on new
>> license.
>>
> Ok, so if i undestrand, i should change that comment to
> // SPDX-License-Identifier: GPL-2.0+
> Right ?

Yes, GPL-2.0+.

Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Stefan Agner Aug. 7, 2018, 8:08 a.m. UTC | #4
On 03.08.2018 21:32, Angelo Dureghello wrote:
> This patch adds a new fsl-edma-common module to allow new
> mcf-edma module code to use most of the fsl-edma code.
> 
> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
> ---
> Changes for v2:
> - patch splitted into 4
> - add mcf-edma as minimal different parts from fsl-edma
> 
> Changes for v3:
> none
> 
> Changes for v4:
> - patch simplified from 4/4 into 2/2
> - collecting all the mcf-edma-related changes
> 
> Changes for v5:
> none
> 
> Changes for v6:
> - adjusted comment header
> - fixed bit shift with BIT()
> - we need to free the interrupts at remove(), so removed all devm_
>   interrupt related calls
> 
> Changes for v7:
> none
> 
> Changes for v8:
> - patch rewritten from scratch, splitted into 3, common code isolated,
>   minimal changes from the original Freescale code have been done.
>   The patch has been tested with both Iris + Colibri Vybrid VF50 and
>   stmark2/mcf54415 Coldfire boards.
> ---
>  drivers/dma/Makefile          |   2 +-
>  drivers/dma/fsl-edma-common.c | 576 ++++++++++++++++++++++++++++
>  drivers/dma/fsl-edma-common.h | 196 ++++++++++
>  drivers/dma/fsl-edma.c        | 697 +---------------------------------
>  4 files changed, 774 insertions(+), 697 deletions(-)
>  create mode 100644 drivers/dma/fsl-edma-common.c
>  create mode 100644 drivers/dma/fsl-edma-common.h
> 
> diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
> index 203a99d68315..66022f59fca4 100644
> --- a/drivers/dma/Makefile
> +++ b/drivers/dma/Makefile
> @@ -31,7 +31,7 @@ obj-$(CONFIG_DW_AXI_DMAC) += dw-axi-dmac/
>  obj-$(CONFIG_DW_DMAC_CORE) += dw/
>  obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
>  obj-$(CONFIG_FSL_DMA) += fsldma.o
> -obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
> +obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
>  obj-$(CONFIG_FSL_RAID) += fsl_raid.o
>  obj-$(CONFIG_HSU_DMA) += hsu/
>  obj-$(CONFIG_IMG_MDC_DMA) += img-mdc-dma.o
> diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
> new file mode 100644
> index 000000000000..0ae7094f477a
> --- /dev/null
> +++ b/drivers/dma/fsl-edma-common.c
> @@ -0,0 +1,576 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Copyright (c) 2013-2014 Freescale Semiconductor, Inc
> +// Copyright (c) 2017 Sysam, Angelo Dureghello  <angelo@sysam.it>
> +
> +#include <linux/dmapool.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +
> +#include "fsl-edma-common.h"
> +
> +/*
> + * R/W functions for big- or little-endian registers:
> + * The eDMA controller's endian is independent of the CPU core's endian.
> + * For the big-endian IP module, the offset for 8-bit or 16-bit registers
> + * should also be swapped opposite to that in little-endian IP.
> + */
> +u32 edma_readl(struct fsl_edma_engine *edma, void __iomem *addr)
> +{
> +	if (edma->big_endian)
> +		return ioread32be(addr);
> +	else
> +		return ioread32(addr);
> +}
> +EXPORT_SYMBOL_GPL(edma_readl);

In 3/3 you link the common object into the two modules individually:

obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
obj-$(CONFIG_MCF_EDMA) += mcf-edma.o fsl-edma-common.o

Therefor you do not access those functions from another module (they are
within the module). No exporting should be necessary. Drop all those
exports.

If possible I would prefer if you start with cleanup/conversions, then
split-up and finally add functionality.

So ideally:
1. Use macros for preprocessor defines (where you move to BIT/GENMASK)
2. Split
3. Add EDMA macros etc.
4. Add ColdFire mcf5441x edma support

--
Stefan

> +
> +void edma_writeb(struct fsl_edma_engine *edma, u8 val, void __iomem *addr)
> +{
> +	/* swap the reg offset for these in big-endian mode */
> +	if (edma->big_endian)
> +		iowrite8(val, (void __iomem *)((unsigned long)addr ^ 0x3));
> +	else
> +		iowrite8(val, addr);
> +}
> +EXPORT_SYMBOL_GPL(edma_writeb);
> +
> +void edma_writew(struct fsl_edma_engine *edma, u16 val, void __iomem *addr)
> +{
> +	/* swap the reg offset for these in big-endian mode */
> +	if (edma->big_endian)
> +		iowrite16be(val, (void __iomem *)((unsigned long)addr ^ 0x2));
> +	else
> +		iowrite16(val, addr);
> +}
> +EXPORT_SYMBOL_GPL(edma_writew);
> +
> +void edma_writel(struct fsl_edma_engine *edma, u32 val, void __iomem *addr)
> +{
> +	if (edma->big_endian)
> +		iowrite32be(val, addr);
> +	else
> +		iowrite32(val, addr);
> +}
> +EXPORT_SYMBOL_GPL(edma_writel);
> +
> +struct fsl_edma_chan *to_fsl_edma_chan(struct dma_chan *chan)
> +{
> +	return container_of(chan, struct fsl_edma_chan, vchan.chan);
> +}
> +EXPORT_SYMBOL_GPL(to_fsl_edma_chan);
> +
> +struct fsl_edma_desc *to_fsl_edma_desc(struct virt_dma_desc *vd)
> +{
> +	return container_of(vd, struct fsl_edma_desc, vdesc);
> +}
> +EXPORT_SYMBOL_GPL(to_fsl_edma_desc);
> +
> +static void fsl_edma_enable_request(struct fsl_edma_chan *fsl_chan)
> +{
> +	void __iomem *addr = fsl_chan->edma->membase;
> +	u32 ch = fsl_chan->vchan.chan.chan_id;
> +
> +	edma_writeb(fsl_chan->edma, EDMA_SEEI_SEEI(ch), addr + EDMA_SEEI);
> +	edma_writeb(fsl_chan->edma, ch, addr + EDMA_SERQ);
> +}
> +
> +void fsl_edma_disable_request(struct fsl_edma_chan *fsl_chan)
> +{
> +	void __iomem *addr = fsl_chan->edma->membase;
> +	u32 ch = fsl_chan->vchan.chan.chan_id;
> +
> +	edma_writeb(fsl_chan->edma, ch, addr + EDMA_CERQ);
> +	edma_writeb(fsl_chan->edma, EDMA_CEEI_CEEI(ch), addr + EDMA_CEEI);
> +}
> +EXPORT_SYMBOL_GPL(fsl_edma_disable_request);
> +
> +void fsl_edma_chan_mux(struct fsl_edma_chan *fsl_chan,
> +			unsigned int slot, bool enable)
> +{
> +	u32 ch = fsl_chan->vchan.chan.chan_id;
> +	void __iomem *muxaddr;
> +	unsigned int chans_per_mux, ch_off;
> +
> +	chans_per_mux = fsl_chan->edma->n_chans / DMAMUX_NR;
> +	ch_off = fsl_chan->vchan.chan.chan_id % chans_per_mux;
> +	muxaddr = fsl_chan->edma->muxbase[ch / chans_per_mux];
> +	slot = EDMAMUX_CHCFG_SOURCE(slot);
> +
> +	if (enable)
> +		iowrite8(EDMAMUX_CHCFG_ENBL | slot, muxaddr + ch_off);
> +	else
> +		iowrite8(EDMAMUX_CHCFG_DIS, muxaddr + ch_off);
> +}
> +EXPORT_SYMBOL_GPL(fsl_edma_chan_mux);
> +
> +static unsigned int fsl_edma_get_tcd_attr(enum dma_slave_buswidth addr_width)
> +{
> +	switch (addr_width) {
> +	case 1:
> +		return EDMA_TCD_ATTR_SSIZE_8BIT | EDMA_TCD_ATTR_DSIZE_8BIT;
> +	case 2:
> +		return EDMA_TCD_ATTR_SSIZE_16BIT | EDMA_TCD_ATTR_DSIZE_16BIT;
> +	case 4:
> +		return EDMA_TCD_ATTR_SSIZE_32BIT | EDMA_TCD_ATTR_DSIZE_32BIT;
> +	case 8:
> +		return EDMA_TCD_ATTR_SSIZE_64BIT | EDMA_TCD_ATTR_DSIZE_64BIT;
> +	default:
> +		return EDMA_TCD_ATTR_SSIZE_32BIT | EDMA_TCD_ATTR_DSIZE_32BIT;
> +	}
> +}
> +
> +void fsl_edma_free_desc(struct virt_dma_desc *vdesc)
> +{
> +	struct fsl_edma_desc *fsl_desc;
> +	int i;
> +
> +	fsl_desc = to_fsl_edma_desc(vdesc);
> +	for (i = 0; i < fsl_desc->n_tcds; i++)
> +		dma_pool_free(fsl_desc->echan->tcd_pool, fsl_desc->tcd[i].vtcd,
> +			      fsl_desc->tcd[i].ptcd);
> +	kfree(fsl_desc);
> +}
> +EXPORT_SYMBOL_GPL(fsl_edma_free_desc);
> +
> +int fsl_edma_terminate_all(struct dma_chan *chan)
> +{
> +	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
> +	unsigned long flags;
> +	LIST_HEAD(head);
> +
> +	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
> +	fsl_edma_disable_request(fsl_chan);
> +	fsl_chan->edesc = NULL;
> +	fsl_chan->idle = true;
> +	vchan_get_all_descriptors(&fsl_chan->vchan, &head);
> +	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
> +	vchan_dma_desc_free_list(&fsl_chan->vchan, &head);
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(fsl_edma_terminate_all);
> +
> +int fsl_edma_pause(struct dma_chan *chan)
> +{
> +	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
> +	if (fsl_chan->edesc) {
> +		fsl_edma_disable_request(fsl_chan);
> +		fsl_chan->status = DMA_PAUSED;
> +		fsl_chan->idle = true;
> +	}
> +	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(fsl_edma_pause);
> +
> +int fsl_edma_resume(struct dma_chan *chan)
> +{
> +	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
> +	if (fsl_chan->edesc) {
> +		fsl_edma_enable_request(fsl_chan);
> +		fsl_chan->status = DMA_IN_PROGRESS;
> +		fsl_chan->idle = false;
> +	}
> +	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(fsl_edma_resume);
> +
> +int fsl_edma_slave_config(struct dma_chan *chan,
> +				 struct dma_slave_config *cfg)
> +{
> +	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
> +
> +	fsl_chan->fsc.dir = cfg->direction;
> +	if (cfg->direction == DMA_DEV_TO_MEM) {
> +		fsl_chan->fsc.dev_addr = cfg->src_addr;
> +		fsl_chan->fsc.addr_width = cfg->src_addr_width;
> +		fsl_chan->fsc.burst = cfg->src_maxburst;
> +		fsl_chan->fsc.attr = fsl_edma_get_tcd_attr(cfg->src_addr_width);
> +	} else if (cfg->direction == DMA_MEM_TO_DEV) {
> +		fsl_chan->fsc.dev_addr = cfg->dst_addr;
> +		fsl_chan->fsc.addr_width = cfg->dst_addr_width;
> +		fsl_chan->fsc.burst = cfg->dst_maxburst;
> +		fsl_chan->fsc.attr = fsl_edma_get_tcd_attr(cfg->dst_addr_width);
> +	} else
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(fsl_edma_slave_config);
> +
> +static size_t fsl_edma_desc_residue(struct fsl_edma_chan *fsl_chan,
> +		struct virt_dma_desc *vdesc, bool in_progress)
> +{
> +	struct fsl_edma_desc *edesc = fsl_chan->edesc;
> +	void __iomem *addr = fsl_chan->edma->membase;
> +	u32 ch = fsl_chan->vchan.chan.chan_id;
> +	enum dma_transfer_direction dir = fsl_chan->fsc.dir;
> +	dma_addr_t cur_addr, dma_addr;
> +	size_t len, size;
> +	int i;
> +
> +	/* calculate the total size in this desc */
> +	for (len = i = 0; i < fsl_chan->edesc->n_tcds; i++)
> +		len += le32_to_cpu(edesc->tcd[i].vtcd->nbytes)
> +			* le16_to_cpu(edesc->tcd[i].vtcd->biter);
> +
> +	if (!in_progress)
> +		return len;
> +
> +	if (dir == DMA_MEM_TO_DEV)
> +		cur_addr = edma_readl(
> +			fsl_chan->edma, addr + EDMA_TCD_SADDR(ch));
> +	else
> +		cur_addr = edma_readl(
> +			fsl_chan->edma, addr + EDMA_TCD_DADDR(ch));
> +
> +	/* figure out the finished and calculate the residue */
> +	for (i = 0; i < fsl_chan->edesc->n_tcds; i++) {
> +		size = le32_to_cpu(edesc->tcd[i].vtcd->nbytes)
> +			* le16_to_cpu(edesc->tcd[i].vtcd->biter);
> +		if (dir == DMA_MEM_TO_DEV)
> +			dma_addr = le32_to_cpu(edesc->tcd[i].vtcd->saddr);
> +		else
> +			dma_addr = le32_to_cpu(edesc->tcd[i].vtcd->daddr);
> +
> +		len -= size;
> +		if (cur_addr >= dma_addr && cur_addr < dma_addr + size) {
> +			len += dma_addr + size - cur_addr;
> +			break;
> +		}
> +	}
> +
> +	return len;
> +}
> +
> +enum dma_status fsl_edma_tx_status(struct dma_chan *chan,
> +		dma_cookie_t cookie, struct dma_tx_state *txstate)
> +{
> +	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
> +	struct virt_dma_desc *vdesc;
> +	enum dma_status status;
> +	unsigned long flags;
> +
> +	status = dma_cookie_status(chan, cookie, txstate);
> +	if (status == DMA_COMPLETE)
> +		return status;
> +
> +	if (!txstate)
> +		return fsl_chan->status;
> +
> +	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
> +	vdesc = vchan_find_desc(&fsl_chan->vchan, cookie);
> +	if (fsl_chan->edesc && cookie == fsl_chan->edesc->vdesc.tx.cookie)
> +		txstate->residue =
> +			fsl_edma_desc_residue(fsl_chan, vdesc, true);
> +	else if (vdesc)
> +		txstate->residue =
> +			fsl_edma_desc_residue(fsl_chan, vdesc, false);
> +	else
> +		txstate->residue = 0;
> +
> +	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
> +
> +	return fsl_chan->status;
> +}
> +EXPORT_SYMBOL_GPL(fsl_edma_tx_status);
> +
> +static void fsl_edma_set_tcd_regs(struct fsl_edma_chan *fsl_chan,
> +				  struct fsl_edma_hw_tcd *tcd)
> +{
> +	struct fsl_edma_engine *edma = fsl_chan->edma;
> +	void __iomem *addr = fsl_chan->edma->membase;
> +	u32 ch = fsl_chan->vchan.chan.chan_id;
> +
> +	/*
> +	 * TCD parameters are stored in struct fsl_edma_hw_tcd in little
> +	 * endian format. However, we need to load the TCD registers in
> +	 * big- or little-endian obeying the eDMA engine model endian.
> +	 */
> +	edma_writew(edma, 0, addr + EDMA_TCD_CSR(ch));
> +	edma_writel(edma, le32_to_cpu(tcd->saddr), addr + EDMA_TCD_SADDR(ch));
> +	edma_writel(edma, le32_to_cpu(tcd->daddr), addr + EDMA_TCD_DADDR(ch));
> +
> +	edma_writew(edma, le16_to_cpu(tcd->attr), addr + EDMA_TCD_ATTR(ch));
> +	edma_writew(edma, le16_to_cpu(tcd->soff), addr + EDMA_TCD_SOFF(ch));
> +
> +	edma_writel(edma, le32_to_cpu(tcd->nbytes), addr + EDMA_TCD_NBYTES(ch));
> +	edma_writel(edma, le32_to_cpu(tcd->slast), addr + EDMA_TCD_SLAST(ch));
> +
> +	edma_writew(edma, le16_to_cpu(tcd->citer), addr + EDMA_TCD_CITER(ch));
> +	edma_writew(edma, le16_to_cpu(tcd->biter), addr + EDMA_TCD_BITER(ch));
> +	edma_writew(edma, le16_to_cpu(tcd->doff), addr + EDMA_TCD_DOFF(ch));
> +
> +	edma_writel(edma,
> +		    le32_to_cpu(tcd->dlast_sga), addr + EDMA_TCD_DLAST_SGA(ch));
> +
> +	edma_writew(edma, le16_to_cpu(tcd->csr), addr + EDMA_TCD_CSR(ch));
> +}
> +
> +static inline
> +void fsl_edma_fill_tcd(struct fsl_edma_hw_tcd *tcd, u32 src, u32 dst,
> +		       u16 attr, u16 soff, u32 nbytes, u32 slast, u16 citer,
> +		       u16 biter, u16 doff, u32 dlast_sga, bool major_int,
> +		       bool disable_req, bool enable_sg)
> +{
> +	u16 csr = 0;
> +
> +	/*
> +	 * eDMA hardware SGs require the TCDs to be stored in little
> +	 * endian format irrespective of the register endian model.
> +	 * So we put the value in little endian in memory, waiting
> +	 * for fsl_edma_set_tcd_regs doing the swap.
> +	 */
> +	tcd->saddr = cpu_to_le32(src);
> +	tcd->daddr = cpu_to_le32(dst);
> +
> +	tcd->attr = cpu_to_le16(attr);
> +
> +	tcd->soff = cpu_to_le16(EDMA_TCD_SOFF_SOFF(soff));
> +
> +	tcd->nbytes = cpu_to_le32(EDMA_TCD_NBYTES_NBYTES(nbytes));
> +	tcd->slast = cpu_to_le32(EDMA_TCD_SLAST_SLAST(slast));
> +
> +	tcd->citer = cpu_to_le16(EDMA_TCD_CITER_CITER(citer));
> +	tcd->doff = cpu_to_le16(EDMA_TCD_DOFF_DOFF(doff));
> +
> +	tcd->dlast_sga = cpu_to_le32(EDMA_TCD_DLAST_SGA_DLAST_SGA(dlast_sga));
> +
> +	tcd->biter = cpu_to_le16(EDMA_TCD_BITER_BITER(biter));
> +	if (major_int)
> +		csr |= EDMA_TCD_CSR_INT_MAJOR;
> +
> +	if (disable_req)
> +		csr |= EDMA_TCD_CSR_D_REQ;
> +
> +	if (enable_sg)
> +		csr |= EDMA_TCD_CSR_E_SG;
> +
> +	tcd->csr = cpu_to_le16(csr);
> +}
> +
> +static struct fsl_edma_desc *fsl_edma_alloc_desc(struct fsl_edma_chan
> *fsl_chan,
> +		int sg_len)
> +{
> +	struct fsl_edma_desc *fsl_desc;
> +	int i;
> +
> +	fsl_desc = kzalloc(sizeof(*fsl_desc) +
> +			   sizeof(struct fsl_edma_sw_tcd) *
> +			   sg_len, GFP_NOWAIT);
> +	if (!fsl_desc)
> +		return NULL;
> +
> +	fsl_desc->echan = fsl_chan;
> +	fsl_desc->n_tcds = sg_len;
> +	for (i = 0; i < sg_len; i++) {
> +		fsl_desc->tcd[i].vtcd = dma_pool_alloc(fsl_chan->tcd_pool,
> +					GFP_NOWAIT, &fsl_desc->tcd[i].ptcd);
> +		if (!fsl_desc->tcd[i].vtcd)
> +			goto err;
> +	}
> +	return fsl_desc;
> +
> +err:
> +	while (--i >= 0)
> +		dma_pool_free(fsl_chan->tcd_pool, fsl_desc->tcd[i].vtcd,
> +				fsl_desc->tcd[i].ptcd);
> +	kfree(fsl_desc);
> +	return NULL;
> +}
> +
> +struct dma_async_tx_descriptor *fsl_edma_prep_dma_cyclic(
> +		struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len,
> +		size_t period_len, enum dma_transfer_direction direction,
> +		unsigned long flags)
> +{
> +	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
> +	struct fsl_edma_desc *fsl_desc;
> +	dma_addr_t dma_buf_next;
> +	int sg_len, i;
> +	u32 src_addr, dst_addr, last_sg, nbytes;
> +	u16 soff, doff, iter;
> +
> +	if (!is_slave_direction(fsl_chan->fsc.dir))
> +		return NULL;
> +
> +	sg_len = buf_len / period_len;
> +	fsl_desc = fsl_edma_alloc_desc(fsl_chan, sg_len);
> +	if (!fsl_desc)
> +		return NULL;
> +	fsl_desc->iscyclic = true;
> +
> +	dma_buf_next = dma_addr;
> +	nbytes = fsl_chan->fsc.addr_width * fsl_chan->fsc.burst;
> +	iter = period_len / nbytes;
> +
> +	for (i = 0; i < sg_len; i++) {
> +		if (dma_buf_next >= dma_addr + buf_len)
> +			dma_buf_next = dma_addr;
> +
> +		/* get next sg's physical address */
> +		last_sg = fsl_desc->tcd[(i + 1) % sg_len].ptcd;
> +
> +		if (fsl_chan->fsc.dir == DMA_MEM_TO_DEV) {
> +			src_addr = dma_buf_next;
> +			dst_addr = fsl_chan->fsc.dev_addr;
> +			soff = fsl_chan->fsc.addr_width;
> +			doff = 0;
> +		} else {
> +			src_addr = fsl_chan->fsc.dev_addr;
> +			dst_addr = dma_buf_next;
> +			soff = 0;
> +			doff = fsl_chan->fsc.addr_width;
> +		}
> +
> +		fsl_edma_fill_tcd(fsl_desc->tcd[i].vtcd, src_addr, dst_addr,
> +				  fsl_chan->fsc.attr, soff, nbytes, 0, iter,
> +				  iter, doff, last_sg, true, false, true);
> +		dma_buf_next += period_len;
> +	}
> +
> +	return vchan_tx_prep(&fsl_chan->vchan, &fsl_desc->vdesc, flags);
> +}
> +EXPORT_SYMBOL_GPL(fsl_edma_prep_dma_cyclic);
> +
> +struct dma_async_tx_descriptor *fsl_edma_prep_slave_sg(
> +		struct dma_chan *chan, struct scatterlist *sgl,
> +		unsigned int sg_len, enum dma_transfer_direction direction,
> +		unsigned long flags, void *context)
> +{
> +	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
> +	struct fsl_edma_desc *fsl_desc;
> +	struct scatterlist *sg;
> +	u32 src_addr, dst_addr, last_sg, nbytes;
> +	u16 soff, doff, iter;
> +	int i;
> +
> +	if (!is_slave_direction(fsl_chan->fsc.dir))
> +		return NULL;
> +
> +	fsl_desc = fsl_edma_alloc_desc(fsl_chan, sg_len);
> +	if (!fsl_desc)
> +		return NULL;
> +	fsl_desc->iscyclic = false;
> +
> +	nbytes = fsl_chan->fsc.addr_width * fsl_chan->fsc.burst;
> +	for_each_sg(sgl, sg, sg_len, i) {
> +		/* get next sg's physical address */
> +		last_sg = fsl_desc->tcd[(i + 1) % sg_len].ptcd;
> +
> +		if (fsl_chan->fsc.dir == DMA_MEM_TO_DEV) {
> +			src_addr = sg_dma_address(sg);
> +			dst_addr = fsl_chan->fsc.dev_addr;
> +			soff = fsl_chan->fsc.addr_width;
> +			doff = 0;
> +		} else {
> +			src_addr = fsl_chan->fsc.dev_addr;
> +			dst_addr = sg_dma_address(sg);
> +			soff = 0;
> +			doff = fsl_chan->fsc.addr_width;
> +		}
> +
> +		iter = sg_dma_len(sg) / nbytes;
> +		if (i < sg_len - 1) {
> +			last_sg = fsl_desc->tcd[(i + 1)].ptcd;
> +			fsl_edma_fill_tcd(fsl_desc->tcd[i].vtcd, src_addr,
> +					  dst_addr, fsl_chan->fsc.attr, soff,
> +					  nbytes, 0, iter, iter, doff, last_sg,
> +					  false, false, true);
> +		} else {
> +			last_sg = 0;
> +			fsl_edma_fill_tcd(fsl_desc->tcd[i].vtcd, src_addr,
> +					  dst_addr, fsl_chan->fsc.attr, soff,
> +					  nbytes, 0, iter, iter, doff, last_sg,
> +					  true, true, false);
> +		}
> +	}
> +
> +	return vchan_tx_prep(&fsl_chan->vchan, &fsl_desc->vdesc, flags);
> +}
> +EXPORT_SYMBOL_GPL(fsl_edma_prep_slave_sg);
> +
> +void fsl_edma_xfer_desc(struct fsl_edma_chan *fsl_chan)
> +{
> +	struct virt_dma_desc *vdesc;
> +
> +	vdesc = vchan_next_desc(&fsl_chan->vchan);
> +	if (!vdesc)
> +		return;
> +	fsl_chan->edesc = to_fsl_edma_desc(vdesc);
> +	fsl_edma_set_tcd_regs(fsl_chan, fsl_chan->edesc->tcd[0].vtcd);
> +	fsl_edma_enable_request(fsl_chan);
> +	fsl_chan->status = DMA_IN_PROGRESS;
> +	fsl_chan->idle = false;
> +}
> +EXPORT_SYMBOL_GPL(fsl_edma_xfer_desc);
> +
> +void fsl_edma_issue_pending(struct dma_chan *chan)
> +{
> +	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
> +
> +	if (unlikely(fsl_chan->pm_state != RUNNING)) {
> +		spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
> +		/* cannot submit due to suspend */
> +		return;
> +	}
> +
> +	if (vchan_issue_pending(&fsl_chan->vchan) && !fsl_chan->edesc)
> +		fsl_edma_xfer_desc(fsl_chan);
> +
> +	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
> +}
> +EXPORT_SYMBOL_GPL(fsl_edma_issue_pending);
> +
> +int fsl_edma_alloc_chan_resources(struct dma_chan *chan)
> +{
> +	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
> +
> +	fsl_chan->tcd_pool = dma_pool_create("tcd_pool", chan->device->dev,
> +				sizeof(struct fsl_edma_hw_tcd),
> +				32, 0);
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(fsl_edma_alloc_chan_resources);
> +
> +void fsl_edma_free_chan_resources(struct dma_chan *chan)
> +{
> +	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
> +	unsigned long flags;
> +	LIST_HEAD(head);
> +
> +	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
> +	fsl_edma_disable_request(fsl_chan);
> +	fsl_edma_chan_mux(fsl_chan, 0, false);
> +	fsl_chan->edesc = NULL;
> +	vchan_get_all_descriptors(&fsl_chan->vchan, &head);
> +	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
> +
> +	vchan_dma_desc_free_list(&fsl_chan->vchan, &head);
> +	dma_pool_destroy(fsl_chan->tcd_pool);
> +	fsl_chan->tcd_pool = NULL;
> +}
> +EXPORT_SYMBOL_GPL(fsl_edma_free_chan_resources);
> +
> +void fsl_edma_cleanup_vchan(struct dma_device *dmadev)
> +{
> +	struct fsl_edma_chan *chan, *_chan;
> +
> +	list_for_each_entry_safe(chan, _chan,
> +				&dmadev->channels, vchan.chan.device_node) {
> +		list_del(&chan->vchan.chan.device_node);
> +		tasklet_kill(&chan->vchan.task);
> +	}
> +}
> +EXPORT_SYMBOL_GPL(fsl_edma_cleanup_vchan);
> +
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/dma/fsl-edma-common.h b/drivers/dma/fsl-edma-common.h
> new file mode 100644
> index 000000000000..f3ea68e15b23
> --- /dev/null
> +++ b/drivers/dma/fsl-edma-common.h
> @@ -0,0 +1,196 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright 2013-2014 Freescale Semiconductor, Inc.
> + * Copyright 2018 Angelo Dureghello <angelo@sysam.it>
> + */
> +#ifndef _FSL_EDMA_COMMON_H_
> +#define _FSL_EDMA_COMMON_H_
> +
> +#include "virt-dma.h"
> +
> +#define EDMA_CR			0x00
> +#define EDMA_ES			0x04
> +#define EDMA_ERQ		0x0C
> +#define EDMA_EEI		0x14
> +#define EDMA_SERQ		0x1B
> +#define EDMA_CERQ		0x1A
> +#define EDMA_SEEI		0x19
> +#define EDMA_CEEI		0x18
> +#define EDMA_CINT		0x1F
> +#define EDMA_CERR		0x1E
> +#define EDMA_SSRT		0x1D
> +#define EDMA_CDNE		0x1C
> +#define EDMA_INTR		0x24
> +#define EDMA_ERR		0x2C
> +
> +#define EDMA_TCD_SADDR(x)	(0x1000 + 32 * (x))
> +#define EDMA_TCD_SOFF(x)	(0x1004 + 32 * (x))
> +#define EDMA_TCD_ATTR(x)	(0x1006 + 32 * (x))
> +#define EDMA_TCD_NBYTES(x)	(0x1008 + 32 * (x))
> +#define EDMA_TCD_SLAST(x)	(0x100C + 32 * (x))
> +#define EDMA_TCD_DADDR(x)	(0x1010 + 32 * (x))
> +#define EDMA_TCD_DOFF(x)	(0x1014 + 32 * (x))
> +#define EDMA_TCD_CITER_ELINK(x)	(0x1016 + 32 * (x))
> +#define EDMA_TCD_CITER(x)	(0x1016 + 32 * (x))
> +#define EDMA_TCD_DLAST_SGA(x)	(0x1018 + 32 * (x))
> +#define EDMA_TCD_CSR(x)		(0x101C + 32 * (x))
> +#define EDMA_TCD_BITER_ELINK(x)	(0x101E + 32 * (x))
> +#define EDMA_TCD_BITER(x)	(0x101E + 32 * (x))
> +
> +#define EDMA_CR_EDBG		BIT(1)
> +#define EDMA_CR_ERCA		BIT(2)
> +#define EDMA_CR_ERGA		BIT(3)
> +#define EDMA_CR_HOE		BIT(4)
> +#define EDMA_CR_HALT		BIT(5)
> +#define EDMA_CR_CLM		BIT(6)
> +#define EDMA_CR_EMLM		BIT(7)
> +#define EDMA_CR_ECX		BIT(16)
> +#define EDMA_CR_CX		BIT(17)
> +
> +#define EDMA_SEEI_SEEI(x)	((x) & 0x1F)
> +#define EDMA_CEEI_CEEI(x)	((x) & 0x1F)
> +#define EDMA_CINT_CINT(x)	((x) & 0x1F)
> +#define EDMA_CERR_CERR(x)	((x) & 0x1F)
> +
> +#define EDMA_TCD_ATTR_DSIZE(x)		(((x) & 0x0007))
> +#define EDMA_TCD_ATTR_DMOD(x)		(((x) & 0x001F) << 3)
> +#define EDMA_TCD_ATTR_SSIZE(x)		(((x) & 0x0007) << 8)
> +#define EDMA_TCD_ATTR_SMOD(x)		(((x) & 0x001F) << 11)
> +#define EDMA_TCD_ATTR_SSIZE_8BIT	(0x0000)
> +#define EDMA_TCD_ATTR_SSIZE_16BIT	(0x0100)
> +#define EDMA_TCD_ATTR_SSIZE_32BIT	(0x0200)
> +#define EDMA_TCD_ATTR_SSIZE_64BIT	(0x0300)
> +#define EDMA_TCD_ATTR_SSIZE_32BYTE	(0x0500)
> +#define EDMA_TCD_ATTR_DSIZE_8BIT	(0x0000)
> +#define EDMA_TCD_ATTR_DSIZE_16BIT	(0x0001)
> +#define EDMA_TCD_ATTR_DSIZE_32BIT	(0x0002)
> +#define EDMA_TCD_ATTR_DSIZE_64BIT	(0x0003)
> +#define EDMA_TCD_ATTR_DSIZE_32BYTE	(0x0005)
> +
> +#define EDMA_TCD_SOFF_SOFF(x)		(x)
> +#define EDMA_TCD_NBYTES_NBYTES(x)	(x)
> +#define EDMA_TCD_SLAST_SLAST(x)		(x)
> +#define EDMA_TCD_DADDR_DADDR(x)		(x)
> +#define EDMA_TCD_CITER_CITER(x)		((x) & 0x7FFF)
> +#define EDMA_TCD_DOFF_DOFF(x)		(x)
> +#define EDMA_TCD_DLAST_SGA_DLAST_SGA(x)	(x)
> +#define EDMA_TCD_BITER_BITER(x)		((x) & 0x7FFF)
> +
> +#define EDMA_TCD_CSR_START		BIT(0)
> +#define EDMA_TCD_CSR_INT_MAJOR		BIT(1)
> +#define EDMA_TCD_CSR_INT_HALF		BIT(2)
> +#define EDMA_TCD_CSR_D_REQ		BIT(3)
> +#define EDMA_TCD_CSR_E_SG		BIT(4)
> +#define EDMA_TCD_CSR_E_LINK		BIT(5)
> +#define EDMA_TCD_CSR_ACTIVE		BIT(6)
> +#define EDMA_TCD_CSR_DONE		BIT(7)
> +
> +#define EDMAMUX_CHCFG_DIS		0x0
> +#define EDMAMUX_CHCFG_ENBL		0x80
> +#define EDMAMUX_CHCFG_SOURCE(n)		((n) & 0x3F)
> +
> +#define DMAMUX_NR	2
> +
> +#define FSL_EDMA_BUSWIDTHS	(BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
> +				 BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
> +				 BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
> +				 BIT(DMA_SLAVE_BUSWIDTH_8_BYTES))
> +enum fsl_edma_pm_state {
> +	RUNNING = 0,
> +	SUSPENDED,
> +};
> +
> +struct fsl_edma_hw_tcd {
> +	__le32	saddr;
> +	__le16	soff;
> +	__le16	attr;
> +	__le32	nbytes;
> +	__le32	slast;
> +	__le32	daddr;
> +	__le16	doff;
> +	__le16	citer;
> +	__le32	dlast_sga;
> +	__le16	csr;
> +	__le16	biter;
> +};
> +
> +struct fsl_edma_sw_tcd {
> +	dma_addr_t			ptcd;
> +	struct fsl_edma_hw_tcd		*vtcd;
> +};
> +
> +struct fsl_edma_slave_config {
> +	enum dma_transfer_direction	dir;
> +	enum dma_slave_buswidth		addr_width;
> +	u32				dev_addr;
> +	u32				burst;
> +	u32				attr;
> +};
> +
> +struct fsl_edma_chan {
> +	struct virt_dma_chan		vchan;
> +	enum dma_status			status;
> +	enum fsl_edma_pm_state		pm_state;
> +	bool				idle;
> +	u32				slave_id;
> +	struct fsl_edma_engine		*edma;
> +	struct fsl_edma_desc		*edesc;
> +	struct fsl_edma_slave_config	fsc;
> +	struct dma_pool			*tcd_pool;
> +};
> +
> +struct fsl_edma_desc {
> +	struct virt_dma_desc		vdesc;
> +	struct fsl_edma_chan		*echan;
> +	bool				iscyclic;
> +	unsigned int			n_tcds;
> +	struct fsl_edma_sw_tcd		tcd[];
> +};
> +
> +struct fsl_edma_engine {
> +	struct dma_device	dma_dev;
> +	void __iomem		*membase;
> +	void __iomem		*muxbase[DMAMUX_NR];
> +	struct clk		*muxclk[DMAMUX_NR];
> +	struct mutex		fsl_edma_mutex;
> +	u32			n_chans;
> +	int			txirq;
> +	int			errirq;
> +	bool			big_endian;
> +	struct fsl_edma_chan	chans[];
> +};
> +
> +u32 edma_readl(struct fsl_edma_engine *edma, void __iomem *addr);
> +void edma_writeb(struct fsl_edma_engine *edma, u8 val, void __iomem *addr);
> +void edma_writew(struct fsl_edma_engine *edma, u16 val, void __iomem *addr);
> +void edma_writel(struct fsl_edma_engine *edma, u32 val, void __iomem *addr);
> +
> +struct fsl_edma_chan *to_fsl_edma_chan(struct dma_chan *chan);
> +struct fsl_edma_desc *to_fsl_edma_desc(struct virt_dma_desc *vd);
> +
> +void fsl_edma_disable_request(struct fsl_edma_chan *fsl_chan);
> +void fsl_edma_chan_mux(struct fsl_edma_chan *fsl_chan,
> +			unsigned int slot, bool enable);
> +void fsl_edma_free_desc(struct virt_dma_desc *vdesc);
> +int fsl_edma_terminate_all(struct dma_chan *chan);
> +int fsl_edma_pause(struct dma_chan *chan);
> +int fsl_edma_resume(struct dma_chan *chan);
> +int fsl_edma_slave_config(struct dma_chan *chan,
> +				 struct dma_slave_config *cfg);
> +enum dma_status fsl_edma_tx_status(struct dma_chan *chan,
> +		dma_cookie_t cookie, struct dma_tx_state *txstate);
> +struct dma_async_tx_descriptor *fsl_edma_prep_dma_cyclic(
> +		struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len,
> +		size_t period_len, enum dma_transfer_direction direction,
> +		unsigned long flags);
> +struct dma_async_tx_descriptor *fsl_edma_prep_slave_sg(
> +		struct dma_chan *chan, struct scatterlist *sgl,
> +		unsigned int sg_len, enum dma_transfer_direction direction,
> +		unsigned long flags, void *context);
> +void fsl_edma_xfer_desc(struct fsl_edma_chan *fsl_chan);
> +void fsl_edma_issue_pending(struct dma_chan *chan);
> +int fsl_edma_alloc_chan_resources(struct dma_chan *chan);
> +void fsl_edma_free_chan_resources(struct dma_chan *chan);
> +void fsl_edma_cleanup_vchan(struct dma_device *dmadev);
> +
> +#endif /* _FSL_EDMA_COMMON_H_ */
> diff --git a/drivers/dma/fsl-edma.c b/drivers/dma/fsl-edma.c
> index c7568869284e..337ad0c0ea78 100644
> --- a/drivers/dma/fsl-edma.c
> +++ b/drivers/dma/fsl-edma.c
> @@ -13,653 +13,16 @@
>   * option) any later version.
>   */
>  
> -#include <linux/init.h>
>  #include <linux/module.h>
>  #include <linux/interrupt.h>
>  #include <linux/clk.h>
> -#include <linux/dma-mapping.h>
> -#include <linux/dmapool.h>
> -#include <linux/slab.h>
> -#include <linux/spinlock.h>
>  #include <linux/of.h>
>  #include <linux/of_device.h>
>  #include <linux/of_address.h>
>  #include <linux/of_irq.h>
>  #include <linux/of_dma.h>
>  
> -#include "virt-dma.h"
> -
> -#define EDMA_CR			0x00
> -#define EDMA_ES			0x04
> -#define EDMA_ERQ		0x0C
> -#define EDMA_EEI		0x14
> -#define EDMA_SERQ		0x1B
> -#define EDMA_CERQ		0x1A
> -#define EDMA_SEEI		0x19
> -#define EDMA_CEEI		0x18
> -#define EDMA_CINT		0x1F
> -#define EDMA_CERR		0x1E
> -#define EDMA_SSRT		0x1D
> -#define EDMA_CDNE		0x1C
> -#define EDMA_INTR		0x24
> -#define EDMA_ERR		0x2C
> -
> -#define EDMA_TCD_SADDR(x)	(0x1000 + 32 * (x))
> -#define EDMA_TCD_SOFF(x)	(0x1004 + 32 * (x))
> -#define EDMA_TCD_ATTR(x)	(0x1006 + 32 * (x))
> -#define EDMA_TCD_NBYTES(x)	(0x1008 + 32 * (x))
> -#define EDMA_TCD_SLAST(x)	(0x100C + 32 * (x))
> -#define EDMA_TCD_DADDR(x)	(0x1010 + 32 * (x))
> -#define EDMA_TCD_DOFF(x)	(0x1014 + 32 * (x))
> -#define EDMA_TCD_CITER_ELINK(x)	(0x1016 + 32 * (x))
> -#define EDMA_TCD_CITER(x)	(0x1016 + 32 * (x))
> -#define EDMA_TCD_DLAST_SGA(x)	(0x1018 + 32 * (x))
> -#define EDMA_TCD_CSR(x)		(0x101C + 32 * (x))
> -#define EDMA_TCD_BITER_ELINK(x)	(0x101E + 32 * (x))
> -#define EDMA_TCD_BITER(x)	(0x101E + 32 * (x))
> -
> -#define EDMA_CR_EDBG		BIT(1)
> -#define EDMA_CR_ERCA		BIT(2)
> -#define EDMA_CR_ERGA		BIT(3)
> -#define EDMA_CR_HOE		BIT(4)
> -#define EDMA_CR_HALT		BIT(5)
> -#define EDMA_CR_CLM		BIT(6)
> -#define EDMA_CR_EMLM		BIT(7)
> -#define EDMA_CR_ECX		BIT(16)
> -#define EDMA_CR_CX		BIT(17)
> -
> -#define EDMA_SEEI_SEEI(x)	((x) & 0x1F)
> -#define EDMA_CEEI_CEEI(x)	((x) & 0x1F)
> -#define EDMA_CINT_CINT(x)	((x) & 0x1F)
> -#define EDMA_CERR_CERR(x)	((x) & 0x1F)
> -
> -#define EDMA_TCD_ATTR_DSIZE(x)		(((x) & 0x0007))
> -#define EDMA_TCD_ATTR_DMOD(x)		(((x) & 0x001F) << 3)
> -#define EDMA_TCD_ATTR_SSIZE(x)		(((x) & 0x0007) << 8)
> -#define EDMA_TCD_ATTR_SMOD(x)		(((x) & 0x001F) << 11)
> -#define EDMA_TCD_ATTR_SSIZE_8BIT	(0x0000)
> -#define EDMA_TCD_ATTR_SSIZE_16BIT	(0x0100)
> -#define EDMA_TCD_ATTR_SSIZE_32BIT	(0x0200)
> -#define EDMA_TCD_ATTR_SSIZE_64BIT	(0x0300)
> -#define EDMA_TCD_ATTR_SSIZE_32BYTE	(0x0500)
> -#define EDMA_TCD_ATTR_DSIZE_8BIT	(0x0000)
> -#define EDMA_TCD_ATTR_DSIZE_16BIT	(0x0001)
> -#define EDMA_TCD_ATTR_DSIZE_32BIT	(0x0002)
> -#define EDMA_TCD_ATTR_DSIZE_64BIT	(0x0003)
> -#define EDMA_TCD_ATTR_DSIZE_32BYTE	(0x0005)
> -
> -#define EDMA_TCD_SOFF_SOFF(x)		(x)
> -#define EDMA_TCD_NBYTES_NBYTES(x)	(x)
> -#define EDMA_TCD_SLAST_SLAST(x)		(x)
> -#define EDMA_TCD_DADDR_DADDR(x)		(x)
> -#define EDMA_TCD_CITER_CITER(x)		((x) & 0x7FFF)
> -#define EDMA_TCD_DOFF_DOFF(x)		(x)
> -#define EDMA_TCD_DLAST_SGA_DLAST_SGA(x)	(x)
> -#define EDMA_TCD_BITER_BITER(x)		((x) & 0x7FFF)
> -
> -#define EDMA_TCD_CSR_START		BIT(0)
> -#define EDMA_TCD_CSR_INT_MAJOR		BIT(1)
> -#define EDMA_TCD_CSR_INT_HALF		BIT(2)
> -#define EDMA_TCD_CSR_D_REQ		BIT(3)
> -#define EDMA_TCD_CSR_E_SG		BIT(4)
> -#define EDMA_TCD_CSR_E_LINK		BIT(5)
> -#define EDMA_TCD_CSR_ACTIVE		BIT(6)
> -#define EDMA_TCD_CSR_DONE		BIT(7)
> -
> -#define EDMAMUX_CHCFG_DIS		0x0
> -#define EDMAMUX_CHCFG_ENBL		0x80
> -#define EDMAMUX_CHCFG_SOURCE(n)		((n) & 0x3F)
> -
> -#define DMAMUX_NR	2
> -
> -#define FSL_EDMA_BUSWIDTHS	BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
> -				BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
> -				BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
> -				BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)
> -enum fsl_edma_pm_state {
> -	RUNNING = 0,
> -	SUSPENDED,
> -};
> -
> -struct fsl_edma_hw_tcd {
> -	__le32	saddr;
> -	__le16	soff;
> -	__le16	attr;
> -	__le32	nbytes;
> -	__le32	slast;
> -	__le32	daddr;
> -	__le16	doff;
> -	__le16	citer;
> -	__le32	dlast_sga;
> -	__le16	csr;
> -	__le16	biter;
> -};
> -
> -struct fsl_edma_sw_tcd {
> -	dma_addr_t			ptcd;
> -	struct fsl_edma_hw_tcd		*vtcd;
> -};
> -
> -struct fsl_edma_slave_config {
> -	enum dma_transfer_direction	dir;
> -	enum dma_slave_buswidth		addr_width;
> -	u32				dev_addr;
> -	u32				burst;
> -	u32				attr;
> -};
> -
> -struct fsl_edma_chan {
> -	struct virt_dma_chan		vchan;
> -	enum dma_status			status;
> -	enum fsl_edma_pm_state		pm_state;
> -	bool				idle;
> -	u32				slave_id;
> -	struct fsl_edma_engine		*edma;
> -	struct fsl_edma_desc		*edesc;
> -	struct fsl_edma_slave_config	fsc;
> -	struct dma_pool			*tcd_pool;
> -};
> -
> -struct fsl_edma_desc {
> -	struct virt_dma_desc		vdesc;
> -	struct fsl_edma_chan		*echan;
> -	bool				iscyclic;
> -	unsigned int			n_tcds;
> -	struct fsl_edma_sw_tcd		tcd[];
> -};
> -
> -struct fsl_edma_engine {
> -	struct dma_device	dma_dev;
> -	void __iomem		*membase;
> -	void __iomem		*muxbase[DMAMUX_NR];
> -	struct clk		*muxclk[DMAMUX_NR];
> -	struct mutex		fsl_edma_mutex;
> -	u32			n_chans;
> -	int			txirq;
> -	int			errirq;
> -	bool			big_endian;
> -	struct fsl_edma_chan	chans[];
> -};
> -
> -/*
> - * R/W functions for big- or little-endian registers:
> - * The eDMA controller's endian is independent of the CPU core's endian.
> - * For the big-endian IP module, the offset for 8-bit or 16-bit registers
> - * should also be swapped opposite to that in little-endian IP.
> - */
> -
> -static u32 edma_readl(struct fsl_edma_engine *edma, void __iomem *addr)
> -{
> -	if (edma->big_endian)
> -		return ioread32be(addr);
> -	else
> -		return ioread32(addr);
> -}
> -
> -static void edma_writeb(struct fsl_edma_engine *edma, u8 val, void
> __iomem *addr)
> -{
> -	/* swap the reg offset for these in big-endian mode */
> -	if (edma->big_endian)
> -		iowrite8(val, (void __iomem *)((unsigned long)addr ^ 0x3));
> -	else
> -		iowrite8(val, addr);
> -}
> -
> -static void edma_writew(struct fsl_edma_engine *edma, u16 val, void
> __iomem *addr)
> -{
> -	/* swap the reg offset for these in big-endian mode */
> -	if (edma->big_endian)
> -		iowrite16be(val, (void __iomem *)((unsigned long)addr ^ 0x2));
> -	else
> -		iowrite16(val, addr);
> -}
> -
> -static void edma_writel(struct fsl_edma_engine *edma, u32 val, void
> __iomem *addr)
> -{
> -	if (edma->big_endian)
> -		iowrite32be(val, addr);
> -	else
> -		iowrite32(val, addr);
> -}
> -
> -static struct fsl_edma_chan *to_fsl_edma_chan(struct dma_chan *chan)
> -{
> -	return container_of(chan, struct fsl_edma_chan, vchan.chan);
> -}
> -
> -static struct fsl_edma_desc *to_fsl_edma_desc(struct virt_dma_desc *vd)
> -{
> -	return container_of(vd, struct fsl_edma_desc, vdesc);
> -}
> -
> -static void fsl_edma_enable_request(struct fsl_edma_chan *fsl_chan)
> -{
> -	void __iomem *addr = fsl_chan->edma->membase;
> -	u32 ch = fsl_chan->vchan.chan.chan_id;
> -
> -	edma_writeb(fsl_chan->edma, EDMA_SEEI_SEEI(ch), addr + EDMA_SEEI);
> -	edma_writeb(fsl_chan->edma, ch, addr + EDMA_SERQ);
> -}
> -
> -static void fsl_edma_disable_request(struct fsl_edma_chan *fsl_chan)
> -{
> -	void __iomem *addr = fsl_chan->edma->membase;
> -	u32 ch = fsl_chan->vchan.chan.chan_id;
> -
> -	edma_writeb(fsl_chan->edma, ch, addr + EDMA_CERQ);
> -	edma_writeb(fsl_chan->edma, EDMA_CEEI_CEEI(ch), addr + EDMA_CEEI);
> -}
> -
> -static void fsl_edma_chan_mux(struct fsl_edma_chan *fsl_chan,
> -			unsigned int slot, bool enable)
> -{
> -	u32 ch = fsl_chan->vchan.chan.chan_id;
> -	void __iomem *muxaddr;
> -	unsigned chans_per_mux, ch_off;
> -
> -	chans_per_mux = fsl_chan->edma->n_chans / DMAMUX_NR;
> -	ch_off = fsl_chan->vchan.chan.chan_id % chans_per_mux;
> -	muxaddr = fsl_chan->edma->muxbase[ch / chans_per_mux];
> -	slot = EDMAMUX_CHCFG_SOURCE(slot);
> -
> -	if (enable)
> -		iowrite8(EDMAMUX_CHCFG_ENBL | slot, muxaddr + ch_off);
> -	else
> -		iowrite8(EDMAMUX_CHCFG_DIS, muxaddr + ch_off);
> -}
> -
> -static unsigned int fsl_edma_get_tcd_attr(enum dma_slave_buswidth addr_width)
> -{
> -	switch (addr_width) {
> -	case 1:
> -		return EDMA_TCD_ATTR_SSIZE_8BIT | EDMA_TCD_ATTR_DSIZE_8BIT;
> -	case 2:
> -		return EDMA_TCD_ATTR_SSIZE_16BIT | EDMA_TCD_ATTR_DSIZE_16BIT;
> -	case 4:
> -		return EDMA_TCD_ATTR_SSIZE_32BIT | EDMA_TCD_ATTR_DSIZE_32BIT;
> -	case 8:
> -		return EDMA_TCD_ATTR_SSIZE_64BIT | EDMA_TCD_ATTR_DSIZE_64BIT;
> -	default:
> -		return EDMA_TCD_ATTR_SSIZE_32BIT | EDMA_TCD_ATTR_DSIZE_32BIT;
> -	}
> -}
> -
> -static void fsl_edma_free_desc(struct virt_dma_desc *vdesc)
> -{
> -	struct fsl_edma_desc *fsl_desc;
> -	int i;
> -
> -	fsl_desc = to_fsl_edma_desc(vdesc);
> -	for (i = 0; i < fsl_desc->n_tcds; i++)
> -		dma_pool_free(fsl_desc->echan->tcd_pool, fsl_desc->tcd[i].vtcd,
> -			      fsl_desc->tcd[i].ptcd);
> -	kfree(fsl_desc);
> -}
> -
> -static int fsl_edma_terminate_all(struct dma_chan *chan)
> -{
> -	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
> -	unsigned long flags;
> -	LIST_HEAD(head);
> -
> -	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
> -	fsl_edma_disable_request(fsl_chan);
> -	fsl_chan->edesc = NULL;
> -	fsl_chan->idle = true;
> -	vchan_get_all_descriptors(&fsl_chan->vchan, &head);
> -	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
> -	vchan_dma_desc_free_list(&fsl_chan->vchan, &head);
> -	return 0;
> -}
> -
> -static int fsl_edma_pause(struct dma_chan *chan)
> -{
> -	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
> -	unsigned long flags;
> -
> -	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
> -	if (fsl_chan->edesc) {
> -		fsl_edma_disable_request(fsl_chan);
> -		fsl_chan->status = DMA_PAUSED;
> -		fsl_chan->idle = true;
> -	}
> -	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
> -	return 0;
> -}
> -
> -static int fsl_edma_resume(struct dma_chan *chan)
> -{
> -	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
> -	unsigned long flags;
> -
> -	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
> -	if (fsl_chan->edesc) {
> -		fsl_edma_enable_request(fsl_chan);
> -		fsl_chan->status = DMA_IN_PROGRESS;
> -		fsl_chan->idle = false;
> -	}
> -	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
> -	return 0;
> -}
> -
> -static int fsl_edma_slave_config(struct dma_chan *chan,
> -				 struct dma_slave_config *cfg)
> -{
> -	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
> -
> -	fsl_chan->fsc.dir = cfg->direction;
> -	if (cfg->direction == DMA_DEV_TO_MEM) {
> -		fsl_chan->fsc.dev_addr = cfg->src_addr;
> -		fsl_chan->fsc.addr_width = cfg->src_addr_width;
> -		fsl_chan->fsc.burst = cfg->src_maxburst;
> -		fsl_chan->fsc.attr = fsl_edma_get_tcd_attr(cfg->src_addr_width);
> -	} else if (cfg->direction == DMA_MEM_TO_DEV) {
> -		fsl_chan->fsc.dev_addr = cfg->dst_addr;
> -		fsl_chan->fsc.addr_width = cfg->dst_addr_width;
> -		fsl_chan->fsc.burst = cfg->dst_maxburst;
> -		fsl_chan->fsc.attr = fsl_edma_get_tcd_attr(cfg->dst_addr_width);
> -	} else {
> -			return -EINVAL;
> -	}
> -	return 0;
> -}
> -
> -static size_t fsl_edma_desc_residue(struct fsl_edma_chan *fsl_chan,
> -		struct virt_dma_desc *vdesc, bool in_progress)
> -{
> -	struct fsl_edma_desc *edesc = fsl_chan->edesc;
> -	void __iomem *addr = fsl_chan->edma->membase;
> -	u32 ch = fsl_chan->vchan.chan.chan_id;
> -	enum dma_transfer_direction dir = fsl_chan->fsc.dir;
> -	dma_addr_t cur_addr, dma_addr;
> -	size_t len, size;
> -	int i;
> -
> -	/* calculate the total size in this desc */
> -	for (len = i = 0; i < fsl_chan->edesc->n_tcds; i++)
> -		len += le32_to_cpu(edesc->tcd[i].vtcd->nbytes)
> -			* le16_to_cpu(edesc->tcd[i].vtcd->biter);
> -
> -	if (!in_progress)
> -		return len;
> -
> -	if (dir == DMA_MEM_TO_DEV)
> -		cur_addr = edma_readl(fsl_chan->edma, addr + EDMA_TCD_SADDR(ch));
> -	else
> -		cur_addr = edma_readl(fsl_chan->edma, addr + EDMA_TCD_DADDR(ch));
> -
> -	/* figure out the finished and calculate the residue */
> -	for (i = 0; i < fsl_chan->edesc->n_tcds; i++) {
> -		size = le32_to_cpu(edesc->tcd[i].vtcd->nbytes)
> -			* le16_to_cpu(edesc->tcd[i].vtcd->biter);
> -		if (dir == DMA_MEM_TO_DEV)
> -			dma_addr = le32_to_cpu(edesc->tcd[i].vtcd->saddr);
> -		else
> -			dma_addr = le32_to_cpu(edesc->tcd[i].vtcd->daddr);
> -
> -		len -= size;
> -		if (cur_addr >= dma_addr && cur_addr < dma_addr + size) {
> -			len += dma_addr + size - cur_addr;
> -			break;
> -		}
> -	}
> -
> -	return len;
> -}
> -
> -static enum dma_status fsl_edma_tx_status(struct dma_chan *chan,
> -		dma_cookie_t cookie, struct dma_tx_state *txstate)
> -{
> -	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
> -	struct virt_dma_desc *vdesc;
> -	enum dma_status status;
> -	unsigned long flags;
> -
> -	status = dma_cookie_status(chan, cookie, txstate);
> -	if (status == DMA_COMPLETE)
> -		return status;
> -
> -	if (!txstate)
> -		return fsl_chan->status;
> -
> -	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
> -	vdesc = vchan_find_desc(&fsl_chan->vchan, cookie);
> -	if (fsl_chan->edesc && cookie == fsl_chan->edesc->vdesc.tx.cookie)
> -		txstate->residue = fsl_edma_desc_residue(fsl_chan, vdesc, true);
> -	else if (vdesc)
> -		txstate->residue = fsl_edma_desc_residue(fsl_chan, vdesc, false);
> -	else
> -		txstate->residue = 0;
> -
> -	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
> -
> -	return fsl_chan->status;
> -}
> -
> -static void fsl_edma_set_tcd_regs(struct fsl_edma_chan *fsl_chan,
> -				  struct fsl_edma_hw_tcd *tcd)
> -{
> -	struct fsl_edma_engine *edma = fsl_chan->edma;
> -	void __iomem *addr = fsl_chan->edma->membase;
> -	u32 ch = fsl_chan->vchan.chan.chan_id;
> -
> -	/*
> -	 * TCD parameters are stored in struct fsl_edma_hw_tcd in little
> -	 * endian format. However, we need to load the TCD registers in
> -	 * big- or little-endian obeying the eDMA engine model endian.
> -	 */
> -	edma_writew(edma, 0, addr + EDMA_TCD_CSR(ch));
> -	edma_writel(edma, le32_to_cpu(tcd->saddr), addr + EDMA_TCD_SADDR(ch));
> -	edma_writel(edma, le32_to_cpu(tcd->daddr), addr + EDMA_TCD_DADDR(ch));
> -
> -	edma_writew(edma, le16_to_cpu(tcd->attr), addr + EDMA_TCD_ATTR(ch));
> -	edma_writew(edma, le16_to_cpu(tcd->soff), addr + EDMA_TCD_SOFF(ch));
> -
> -	edma_writel(edma, le32_to_cpu(tcd->nbytes), addr + EDMA_TCD_NBYTES(ch));
> -	edma_writel(edma, le32_to_cpu(tcd->slast), addr + EDMA_TCD_SLAST(ch));
> -
> -	edma_writew(edma, le16_to_cpu(tcd->citer), addr + EDMA_TCD_CITER(ch));
> -	edma_writew(edma, le16_to_cpu(tcd->biter), addr + EDMA_TCD_BITER(ch));
> -	edma_writew(edma, le16_to_cpu(tcd->doff), addr + EDMA_TCD_DOFF(ch));
> -
> -	edma_writel(edma, le32_to_cpu(tcd->dlast_sga), addr + EDMA_TCD_DLAST_SGA(ch));
> -
> -	edma_writew(edma, le16_to_cpu(tcd->csr), addr + EDMA_TCD_CSR(ch));
> -}
> -
> -static inline
> -void fsl_edma_fill_tcd(struct fsl_edma_hw_tcd *tcd, u32 src, u32 dst,
> -		       u16 attr, u16 soff, u32 nbytes, u32 slast, u16 citer,
> -		       u16 biter, u16 doff, u32 dlast_sga, bool major_int,
> -		       bool disable_req, bool enable_sg)
> -{
> -	u16 csr = 0;
> -
> -	/*
> -	 * eDMA hardware SGs require the TCDs to be stored in little
> -	 * endian format irrespective of the register endian model.
> -	 * So we put the value in little endian in memory, waiting
> -	 * for fsl_edma_set_tcd_regs doing the swap.
> -	 */
> -	tcd->saddr = cpu_to_le32(src);
> -	tcd->daddr = cpu_to_le32(dst);
> -
> -	tcd->attr = cpu_to_le16(attr);
> -
> -	tcd->soff = cpu_to_le16(EDMA_TCD_SOFF_SOFF(soff));
> -
> -	tcd->nbytes = cpu_to_le32(EDMA_TCD_NBYTES_NBYTES(nbytes));
> -	tcd->slast = cpu_to_le32(EDMA_TCD_SLAST_SLAST(slast));
> -
> -	tcd->citer = cpu_to_le16(EDMA_TCD_CITER_CITER(citer));
> -	tcd->doff = cpu_to_le16(EDMA_TCD_DOFF_DOFF(doff));
> -
> -	tcd->dlast_sga = cpu_to_le32(EDMA_TCD_DLAST_SGA_DLAST_SGA(dlast_sga));
> -
> -	tcd->biter = cpu_to_le16(EDMA_TCD_BITER_BITER(biter));
> -	if (major_int)
> -		csr |= EDMA_TCD_CSR_INT_MAJOR;
> -
> -	if (disable_req)
> -		csr |= EDMA_TCD_CSR_D_REQ;
> -
> -	if (enable_sg)
> -		csr |= EDMA_TCD_CSR_E_SG;
> -
> -	tcd->csr = cpu_to_le16(csr);
> -}
> -
> -static struct fsl_edma_desc *fsl_edma_alloc_desc(struct fsl_edma_chan
> *fsl_chan,
> -		int sg_len)
> -{
> -	struct fsl_edma_desc *fsl_desc;
> -	int i;
> -
> -	fsl_desc = kzalloc(sizeof(*fsl_desc) + sizeof(struct
> fsl_edma_sw_tcd) * sg_len,
> -				GFP_NOWAIT);
> -	if (!fsl_desc)
> -		return NULL;
> -
> -	fsl_desc->echan = fsl_chan;
> -	fsl_desc->n_tcds = sg_len;
> -	for (i = 0; i < sg_len; i++) {
> -		fsl_desc->tcd[i].vtcd = dma_pool_alloc(fsl_chan->tcd_pool,
> -					GFP_NOWAIT, &fsl_desc->tcd[i].ptcd);
> -		if (!fsl_desc->tcd[i].vtcd)
> -			goto err;
> -	}
> -	return fsl_desc;
> -
> -err:
> -	while (--i >= 0)
> -		dma_pool_free(fsl_chan->tcd_pool, fsl_desc->tcd[i].vtcd,
> -				fsl_desc->tcd[i].ptcd);
> -	kfree(fsl_desc);
> -	return NULL;
> -}
> -
> -static struct dma_async_tx_descriptor *fsl_edma_prep_dma_cyclic(
> -		struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len,
> -		size_t period_len, enum dma_transfer_direction direction,
> -		unsigned long flags)
> -{
> -	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
> -	struct fsl_edma_desc *fsl_desc;
> -	dma_addr_t dma_buf_next;
> -	int sg_len, i;
> -	u32 src_addr, dst_addr, last_sg, nbytes;
> -	u16 soff, doff, iter;
> -
> -	if (!is_slave_direction(fsl_chan->fsc.dir))
> -		return NULL;
> -
> -	sg_len = buf_len / period_len;
> -	fsl_desc = fsl_edma_alloc_desc(fsl_chan, sg_len);
> -	if (!fsl_desc)
> -		return NULL;
> -	fsl_desc->iscyclic = true;
> -
> -	dma_buf_next = dma_addr;
> -	nbytes = fsl_chan->fsc.addr_width * fsl_chan->fsc.burst;
> -	iter = period_len / nbytes;
> -
> -	for (i = 0; i < sg_len; i++) {
> -		if (dma_buf_next >= dma_addr + buf_len)
> -			dma_buf_next = dma_addr;
> -
> -		/* get next sg's physical address */
> -		last_sg = fsl_desc->tcd[(i + 1) % sg_len].ptcd;
> -
> -		if (fsl_chan->fsc.dir == DMA_MEM_TO_DEV) {
> -			src_addr = dma_buf_next;
> -			dst_addr = fsl_chan->fsc.dev_addr;
> -			soff = fsl_chan->fsc.addr_width;
> -			doff = 0;
> -		} else {
> -			src_addr = fsl_chan->fsc.dev_addr;
> -			dst_addr = dma_buf_next;
> -			soff = 0;
> -			doff = fsl_chan->fsc.addr_width;
> -		}
> -
> -		fsl_edma_fill_tcd(fsl_desc->tcd[i].vtcd, src_addr, dst_addr,
> -				  fsl_chan->fsc.attr, soff, nbytes, 0, iter,
> -				  iter, doff, last_sg, true, false, true);
> -		dma_buf_next += period_len;
> -	}
> -
> -	return vchan_tx_prep(&fsl_chan->vchan, &fsl_desc->vdesc, flags);
> -}
> -
> -static struct dma_async_tx_descriptor *fsl_edma_prep_slave_sg(
> -		struct dma_chan *chan, struct scatterlist *sgl,
> -		unsigned int sg_len, enum dma_transfer_direction direction,
> -		unsigned long flags, void *context)
> -{
> -	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
> -	struct fsl_edma_desc *fsl_desc;
> -	struct scatterlist *sg;
> -	u32 src_addr, dst_addr, last_sg, nbytes;
> -	u16 soff, doff, iter;
> -	int i;
> -
> -	if (!is_slave_direction(fsl_chan->fsc.dir))
> -		return NULL;
> -
> -	fsl_desc = fsl_edma_alloc_desc(fsl_chan, sg_len);
> -	if (!fsl_desc)
> -		return NULL;
> -	fsl_desc->iscyclic = false;
> -
> -	nbytes = fsl_chan->fsc.addr_width * fsl_chan->fsc.burst;
> -	for_each_sg(sgl, sg, sg_len, i) {
> -		/* get next sg's physical address */
> -		last_sg = fsl_desc->tcd[(i + 1) % sg_len].ptcd;
> -
> -		if (fsl_chan->fsc.dir == DMA_MEM_TO_DEV) {
> -			src_addr = sg_dma_address(sg);
> -			dst_addr = fsl_chan->fsc.dev_addr;
> -			soff = fsl_chan->fsc.addr_width;
> -			doff = 0;
> -		} else {
> -			src_addr = fsl_chan->fsc.dev_addr;
> -			dst_addr = sg_dma_address(sg);
> -			soff = 0;
> -			doff = fsl_chan->fsc.addr_width;
> -		}
> -
> -		iter = sg_dma_len(sg) / nbytes;
> -		if (i < sg_len - 1) {
> -			last_sg = fsl_desc->tcd[(i + 1)].ptcd;
> -			fsl_edma_fill_tcd(fsl_desc->tcd[i].vtcd, src_addr,
> -					  dst_addr, fsl_chan->fsc.attr, soff,
> -					  nbytes, 0, iter, iter, doff, last_sg,
> -					  false, false, true);
> -		} else {
> -			last_sg = 0;
> -			fsl_edma_fill_tcd(fsl_desc->tcd[i].vtcd, src_addr,
> -					  dst_addr, fsl_chan->fsc.attr, soff,
> -					  nbytes, 0, iter, iter, doff, last_sg,
> -					  true, true, false);
> -		}
> -	}
> -
> -	return vchan_tx_prep(&fsl_chan->vchan, &fsl_desc->vdesc, flags);
> -}
> -
> -static void fsl_edma_xfer_desc(struct fsl_edma_chan *fsl_chan)
> -{
> -	struct virt_dma_desc *vdesc;
> -
> -	vdesc = vchan_next_desc(&fsl_chan->vchan);
> -	if (!vdesc)
> -		return;
> -	fsl_chan->edesc = to_fsl_edma_desc(vdesc);
> -	fsl_edma_set_tcd_regs(fsl_chan, fsl_chan->edesc->tcd[0].vtcd);
> -	fsl_edma_enable_request(fsl_chan);
> -	fsl_chan->status = DMA_IN_PROGRESS;
> -	fsl_chan->idle = false;
> -}
> +#include "fsl-edma-common.h"
>  
>  static irqreturn_t fsl_edma_tx_handler(int irq, void *dev_id)
>  {
> @@ -730,25 +93,6 @@ static irqreturn_t fsl_edma_irq_handler(int irq,
> void *dev_id)
>  	return fsl_edma_err_handler(irq, dev_id);
>  }
>  
> -static void fsl_edma_issue_pending(struct dma_chan *chan)
> -{
> -	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
> -	unsigned long flags;
> -
> -	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
> -
> -	if (unlikely(fsl_chan->pm_state != RUNNING)) {
> -		spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
> -		/* cannot submit due to suspend */
> -		return;
> -	}
> -
> -	if (vchan_issue_pending(&fsl_chan->vchan) && !fsl_chan->edesc)
> -		fsl_edma_xfer_desc(fsl_chan);
> -
> -	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
> -}
> -
>  static struct dma_chan *fsl_edma_xlate(struct of_phandle_args *dma_spec,
>  		struct of_dma *ofdma)
>  {
> @@ -781,34 +125,6 @@ static struct dma_chan *fsl_edma_xlate(struct
> of_phandle_args *dma_spec,
>  	return NULL;
>  }
>  
> -static int fsl_edma_alloc_chan_resources(struct dma_chan *chan)
> -{
> -	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
> -
> -	fsl_chan->tcd_pool = dma_pool_create("tcd_pool", chan->device->dev,
> -				sizeof(struct fsl_edma_hw_tcd),
> -				32, 0);
> -	return 0;
> -}
> -
> -static void fsl_edma_free_chan_resources(struct dma_chan *chan)
> -{
> -	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
> -	unsigned long flags;
> -	LIST_HEAD(head);
> -
> -	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
> -	fsl_edma_disable_request(fsl_chan);
> -	fsl_edma_chan_mux(fsl_chan, 0, false);
> -	fsl_chan->edesc = NULL;
> -	vchan_get_all_descriptors(&fsl_chan->vchan, &head);
> -	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
> -
> -	vchan_dma_desc_free_list(&fsl_chan->vchan, &head);
> -	dma_pool_destroy(fsl_chan->tcd_pool);
> -	fsl_chan->tcd_pool = NULL;
> -}
> -
>  static int
>  fsl_edma_irq_init(struct platform_device *pdev, struct
> fsl_edma_engine *fsl_edma)
>  {
> @@ -995,17 +311,6 @@ static int fsl_edma_probe(struct platform_device *pdev)
>  	return 0;
>  }
>  
> -static void fsl_edma_cleanup_vchan(struct dma_device *dmadev)
> -{
> -	struct fsl_edma_chan *chan, *_chan;
> -
> -	list_for_each_entry_safe(chan, _chan,
> -				&dmadev->channels, vchan.chan.device_node) {
> -		list_del(&chan->vchan.chan.device_node);
> -		tasklet_kill(&chan->vchan.task);
> -	}
> -}
> -
>  static int fsl_edma_remove(struct platform_device *pdev)
>  {
>  	struct device_node *np = pdev->dev.of_node;
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Krzysztof Kozlowski Aug. 7, 2018, 12:14 p.m. UTC | #5
On 7 August 2018 at 10:08, Stefan Agner <stefan@agner.ch> wrote:
> On 03.08.2018 21:32, Angelo Dureghello wrote:
>> This patch adds a new fsl-edma-common module to allow new
>> mcf-edma module code to use most of the fsl-edma code.
>>
>> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
>> ---
>> Changes for v2:
>> - patch splitted into 4
>> - add mcf-edma as minimal different parts from fsl-edma
>>
>> Changes for v3:
>> none
>>
>> Changes for v4:
>> - patch simplified from 4/4 into 2/2
>> - collecting all the mcf-edma-related changes
>>
>> Changes for v5:
>> none
>>
>> Changes for v6:
>> - adjusted comment header
>> - fixed bit shift with BIT()
>> - we need to free the interrupts at remove(), so removed all devm_
>>   interrupt related calls
>>
>> Changes for v7:
>> none
>>
>> Changes for v8:
>> - patch rewritten from scratch, splitted into 3, common code isolated,
>>   minimal changes from the original Freescale code have been done.
>>   The patch has been tested with both Iris + Colibri Vybrid VF50 and
>>   stmark2/mcf54415 Coldfire boards.
>> ---
>>  drivers/dma/Makefile          |   2 +-
>>  drivers/dma/fsl-edma-common.c | 576 ++++++++++++++++++++++++++++
>>  drivers/dma/fsl-edma-common.h | 196 ++++++++++
>>  drivers/dma/fsl-edma.c        | 697 +---------------------------------
>>  4 files changed, 774 insertions(+), 697 deletions(-)
>>  create mode 100644 drivers/dma/fsl-edma-common.c
>>  create mode 100644 drivers/dma/fsl-edma-common.h
>>
>> diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
>> index 203a99d68315..66022f59fca4 100644
>> --- a/drivers/dma/Makefile
>> +++ b/drivers/dma/Makefile
>> @@ -31,7 +31,7 @@ obj-$(CONFIG_DW_AXI_DMAC) += dw-axi-dmac/
>>  obj-$(CONFIG_DW_DMAC_CORE) += dw/
>>  obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
>>  obj-$(CONFIG_FSL_DMA) += fsldma.o
>> -obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
>> +obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
>>  obj-$(CONFIG_FSL_RAID) += fsl_raid.o
>>  obj-$(CONFIG_HSU_DMA) += hsu/
>>  obj-$(CONFIG_IMG_MDC_DMA) += img-mdc-dma.o
>> diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
>> new file mode 100644
>> index 000000000000..0ae7094f477a
>> --- /dev/null
>> +++ b/drivers/dma/fsl-edma-common.c
>> @@ -0,0 +1,576 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +//
>> +// Copyright (c) 2013-2014 Freescale Semiconductor, Inc
>> +// Copyright (c) 2017 Sysam, Angelo Dureghello  <angelo@sysam.it>
>> +
>> +#include <linux/dmapool.h>
>> +#include <linux/module.h>
>> +#include <linux/slab.h>
>> +
>> +#include "fsl-edma-common.h"
>> +
>> +/*
>> + * R/W functions for big- or little-endian registers:
>> + * The eDMA controller's endian is independent of the CPU core's endian.
>> + * For the big-endian IP module, the offset for 8-bit or 16-bit registers
>> + * should also be swapped opposite to that in little-endian IP.
>> + */
>> +u32 edma_readl(struct fsl_edma_engine *edma, void __iomem *addr)
>> +{
>> +     if (edma->big_endian)
>> +             return ioread32be(addr);
>> +     else
>> +             return ioread32(addr);
>> +}
>> +EXPORT_SYMBOL_GPL(edma_readl);
>
> In 3/3 you link the common object into the two modules individually:
>
> obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
> obj-$(CONFIG_MCF_EDMA) += mcf-edma.o fsl-edma-common.o
>
> Therefor you do not access those functions from another module (they are
> within the module). No exporting should be necessary. Drop all those
> exports.

The fsl-edma-common will be its own module so the exports are
necessary for proper linking/modpost.

Best regards,
Krzysztof

> If possible I would prefer if you start with cleanup/conversions, then
> split-up and finally add functionality.
>
> So ideally:
> 1. Use macros for preprocessor defines (where you move to BIT/GENMASK)
> 2. Split
> 3. Add EDMA macros etc.
> 4. Add ColdFire mcf5441x edma support
>
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Stefan Agner Aug. 7, 2018, 5:47 p.m. UTC | #6
On 07.08.2018 14:14, Krzysztof Kozlowski wrote:
> On 7 August 2018 at 10:08, Stefan Agner <stefan@agner.ch> wrote:
>> On 03.08.2018 21:32, Angelo Dureghello wrote:
>>> This patch adds a new fsl-edma-common module to allow new
>>> mcf-edma module code to use most of the fsl-edma code.
>>>
>>> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
>>> ---
>>> Changes for v2:
>>> - patch splitted into 4
>>> - add mcf-edma as minimal different parts from fsl-edma
>>>
>>> Changes for v3:
>>> none
>>>
>>> Changes for v4:
>>> - patch simplified from 4/4 into 2/2
>>> - collecting all the mcf-edma-related changes
>>>
>>> Changes for v5:
>>> none
>>>
>>> Changes for v6:
>>> - adjusted comment header
>>> - fixed bit shift with BIT()
>>> - we need to free the interrupts at remove(), so removed all devm_
>>>   interrupt related calls
>>>
>>> Changes for v7:
>>> none
>>>
>>> Changes for v8:
>>> - patch rewritten from scratch, splitted into 3, common code isolated,
>>>   minimal changes from the original Freescale code have been done.
>>>   The patch has been tested with both Iris + Colibri Vybrid VF50 and
>>>   stmark2/mcf54415 Coldfire boards.
>>> ---
>>>  drivers/dma/Makefile          |   2 +-
>>>  drivers/dma/fsl-edma-common.c | 576 ++++++++++++++++++++++++++++
>>>  drivers/dma/fsl-edma-common.h | 196 ++++++++++
>>>  drivers/dma/fsl-edma.c        | 697 +---------------------------------
>>>  4 files changed, 774 insertions(+), 697 deletions(-)
>>>  create mode 100644 drivers/dma/fsl-edma-common.c
>>>  create mode 100644 drivers/dma/fsl-edma-common.h
>>>
>>> diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
>>> index 203a99d68315..66022f59fca4 100644
>>> --- a/drivers/dma/Makefile
>>> +++ b/drivers/dma/Makefile
>>> @@ -31,7 +31,7 @@ obj-$(CONFIG_DW_AXI_DMAC) += dw-axi-dmac/
>>>  obj-$(CONFIG_DW_DMAC_CORE) += dw/
>>>  obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
>>>  obj-$(CONFIG_FSL_DMA) += fsldma.o
>>> -obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
>>> +obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
>>>  obj-$(CONFIG_FSL_RAID) += fsl_raid.o
>>>  obj-$(CONFIG_HSU_DMA) += hsu/
>>>  obj-$(CONFIG_IMG_MDC_DMA) += img-mdc-dma.o
>>> diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
>>> new file mode 100644
>>> index 000000000000..0ae7094f477a
>>> --- /dev/null
>>> +++ b/drivers/dma/fsl-edma-common.c
>>> @@ -0,0 +1,576 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +//
>>> +// Copyright (c) 2013-2014 Freescale Semiconductor, Inc
>>> +// Copyright (c) 2017 Sysam, Angelo Dureghello  <angelo@sysam.it>
>>> +
>>> +#include <linux/dmapool.h>
>>> +#include <linux/module.h>
>>> +#include <linux/slab.h>
>>> +
>>> +#include "fsl-edma-common.h"
>>> +
>>> +/*
>>> + * R/W functions for big- or little-endian registers:
>>> + * The eDMA controller's endian is independent of the CPU core's endian.
>>> + * For the big-endian IP module, the offset for 8-bit or 16-bit registers
>>> + * should also be swapped opposite to that in little-endian IP.
>>> + */
>>> +u32 edma_readl(struct fsl_edma_engine *edma, void __iomem *addr)
>>> +{
>>> +     if (edma->big_endian)
>>> +             return ioread32be(addr);
>>> +     else
>>> +             return ioread32(addr);
>>> +}
>>> +EXPORT_SYMBOL_GPL(edma_readl);
>>
>> In 3/3 you link the common object into the two modules individually:
>>
>> obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
>> obj-$(CONFIG_MCF_EDMA) += mcf-edma.o fsl-edma-common.o
>>
>> Therefor you do not access those functions from another module (they are
>> within the module). No exporting should be necessary. Drop all those
>> exports.
> 
> The fsl-edma-common will be its own module so the exports are
> necessary for proper linking/modpost.

Hm, oh I see, I got that wrong.

We could use
fsl-edma-all-y = fsl-edma.o fsl-edma-common.o
obj-$(CONFIG_FSL_EDMA) += fsl-edma-all.o
mcf-edma-all-y = mcf-edma.o fsl-edma-common.o
obj-$(CONFIG_MCF_EDMA) += mcf-edma-all.o

to create two modules but that duplicates some code. It probably
wouldn't matter in practise since the two IPs are used on different
architecture...

However, if we stay with the three modules approach, we should introduce
a hidden config symbol, e.g.

config FSL_EDMA_COMMON
	tristate

In FSL_EDMA/MCF_EDMA use
	select FSL_EDMA_COMMON

And in the Makefile
obj-$(CONFIG_FSL_EDMA_COMMON) += fsl-edma-common.o
obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
obj-$(CONFIG_MCF_EDMA) += mcf-edma.o


However, I do not like that the compiler can no longer inline simple
acesors like edma_(readl|writel). So if we stay with the three modules
approach then move at least the accesors and
to_fsl_edma_chan/to_fsl_edma_desc as inline functions to the header
file.

--
Stefan

> 
> Best regards,
> Krzysztof
> 
>> If possible I would prefer if you start with cleanup/conversions, then
>> split-up and finally add functionality.
>>
>> So ideally:
>> 1. Use macros for preprocessor defines (where you move to BIT/GENMASK)
>> 2. Split
>> 3. Add EDMA macros etc.
>> 4. Add ColdFire mcf5441x edma support
>>
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Angelo Dureghello Aug. 9, 2018, 10:37 p.m. UTC | #7
Hi Stefan,

i am about to post a v9 in short.

On Tue, Aug 07, 2018 at 07:47:19PM +0200, Stefan Agner wrote:
> On 07.08.2018 14:14, Krzysztof Kozlowski wrote:
> > On 7 August 2018 at 10:08, Stefan Agner <stefan@agner.ch> wrote:
> >> On 03.08.2018 21:32, Angelo Dureghello wrote:
> >>> This patch adds a new fsl-edma-common module to allow new
> >>> mcf-edma module code to use most of the fsl-edma code.
> >>>
> >>> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
> >>> ---
> >>> Changes for v2:
> >>> - patch splitted into 4
> >>> - add mcf-edma as minimal different parts from fsl-edma
> >>>
> >>> Changes for v3:
> >>> none
> >>>
> >>> Changes for v4:
> >>> - patch simplified from 4/4 into 2/2
> >>> - collecting all the mcf-edma-related changes
> >>>
> >>> Changes for v5:
> >>> none
> >>>
> >>> Changes for v6:
> >>> - adjusted comment header
> >>> - fixed bit shift with BIT()
> >>> - we need to free the interrupts at remove(), so removed all devm_
> >>>   interrupt related calls
> >>>
> >>> Changes for v7:
> >>> none
> >>>
> >>> Changes for v8:
> >>> - patch rewritten from scratch, splitted into 3, common code isolated,
> >>>   minimal changes from the original Freescale code have been done.
> >>>   The patch has been tested with both Iris + Colibri Vybrid VF50 and
> >>>   stmark2/mcf54415 Coldfire boards.
> >>> ---
> >>>  drivers/dma/Makefile          |   2 +-
> >>>  drivers/dma/fsl-edma-common.c | 576 ++++++++++++++++++++++++++++
> >>>  drivers/dma/fsl-edma-common.h | 196 ++++++++++
> >>>  drivers/dma/fsl-edma.c        | 697 +---------------------------------
> >>>  4 files changed, 774 insertions(+), 697 deletions(-)
> >>>  create mode 100644 drivers/dma/fsl-edma-common.c
> >>>  create mode 100644 drivers/dma/fsl-edma-common.h
> >>>
> >>> diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
> >>> index 203a99d68315..66022f59fca4 100644
> >>> --- a/drivers/dma/Makefile
> >>> +++ b/drivers/dma/Makefile
> >>> @@ -31,7 +31,7 @@ obj-$(CONFIG_DW_AXI_DMAC) += dw-axi-dmac/
> >>>  obj-$(CONFIG_DW_DMAC_CORE) += dw/
> >>>  obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
> >>>  obj-$(CONFIG_FSL_DMA) += fsldma.o
> >>> -obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
> >>> +obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
> >>>  obj-$(CONFIG_FSL_RAID) += fsl_raid.o
> >>>  obj-$(CONFIG_HSU_DMA) += hsu/
> >>>  obj-$(CONFIG_IMG_MDC_DMA) += img-mdc-dma.o
> >>> diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
> >>> new file mode 100644
> >>> index 000000000000..0ae7094f477a
> >>> --- /dev/null
> >>> +++ b/drivers/dma/fsl-edma-common.c
> >>> @@ -0,0 +1,576 @@
> >>> +// SPDX-License-Identifier: GPL-2.0
> >>> +//
> >>> +// Copyright (c) 2013-2014 Freescale Semiconductor, Inc
> >>> +// Copyright (c) 2017 Sysam, Angelo Dureghello  <angelo@sysam.it>
> >>> +
> >>> +#include <linux/dmapool.h>
> >>> +#include <linux/module.h>
> >>> +#include <linux/slab.h>
> >>> +
> >>> +#include "fsl-edma-common.h"
> >>> +
> >>> +/*
> >>> + * R/W functions for big- or little-endian registers:
> >>> + * The eDMA controller's endian is independent of the CPU core's endian.
> >>> + * For the big-endian IP module, the offset for 8-bit or 16-bit registers
> >>> + * should also be swapped opposite to that in little-endian IP.
> >>> + */
> >>> +u32 edma_readl(struct fsl_edma_engine *edma, void __iomem *addr)
> >>> +{
> >>> +     if (edma->big_endian)
> >>> +             return ioread32be(addr);
> >>> +     else
> >>> +             return ioread32(addr);
> >>> +}
> >>> +EXPORT_SYMBOL_GPL(edma_readl);
> >>
> >> In 3/3 you link the common object into the two modules individually:
> >>
> >> obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
> >> obj-$(CONFIG_MCF_EDMA) += mcf-edma.o fsl-edma-common.o
> >>
> >> Therefor you do not access those functions from another module (they are
> >> within the module). No exporting should be necessary. Drop all those
> >> exports.
> > 
> > The fsl-edma-common will be its own module so the exports are
> > necessary for proper linking/modpost.
> 
> Hm, oh I see, I got that wrong.
> 
> We could use
> fsl-edma-all-y = fsl-edma.o fsl-edma-common.o
> obj-$(CONFIG_FSL_EDMA) += fsl-edma-all.o
> mcf-edma-all-y = mcf-edma.o fsl-edma-common.o
> obj-$(CONFIG_MCF_EDMA) += mcf-edma-all.o
> 
> to create two modules but that duplicates some code. It probably
> wouldn't matter in practise since the two IPs are used on different
> architecture...
> 
> However, if we stay with the three modules approach, we should introduce
> a hidden config symbol, e.g.
> 
> config FSL_EDMA_COMMON
> 	tristate
> 
> In FSL_EDMA/MCF_EDMA use
> 	select FSL_EDMA_COMMON
> 
> And in the Makefile
> obj-$(CONFIG_FSL_EDMA_COMMON) += fsl-edma-common.o
> obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
> obj-$(CONFIG_MCF_EDMA) += mcf-edma.o
> 
> 
There was already a discussion with Vinod and Geert on this, and i 
finally previously changed things in this way 

obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o

The idea was to simplify things avoiding to use an additional
config symbol, as i did initially. It's a common pattern in 
several Makefiles (e.g.drivers/net/ethernet/8390/Makefile and 
drivers/scsi/Makefile).
Also we have a single common code part since obj-y is a list, 
and IIRC it's filtered for duplicates.
So if can be ok for you too, i would not roll back again.

> However, I do not like that the compiler can no longer inline simple
> acesors like edma_(readl|writel). So if we stay with the three modules
> approach then move at least the accesors and
> to_fsl_edma_chan/to_fsl_edma_desc as inline functions to the header
> file.
> 
I agree too, my initial patch was a single separate driver. But it
resulted in too much duplicated code, so a common module has been
required. Btw, seems i cannot inline those functions. fsl-edma-common.h 
is included from both fsl-edma-common.c and mcf/fsl-edma.c resulting
in multiple definitions linking error.

Mainly until v7 there was several discussions and a first approval, 
if possible i would not change again heavily the patch structure for
a bug that seemss already been fixed.

So i fixed all the possible points of this thread and organized next 
patch as 

1/4 dmaengine: fsl-edma: extract common fsl-edma code (no changes ..
2/4 dmaengine: fsl-edma: add edma version and configurable registers
3/4 dmaengine: fsl-edma: fix macros
4/4 dmaengine: fsl-edma: add ColdFire mcf5441x edma support

Let me know if you have any other point or if can proceed.

Best regards,
Angelo Dureghello

> --
> Stefan
> 
> > 
> > Best regards,
> > Krzysztof
> > 
> >> If possible I would prefer if you start with cleanup/conversions, then
> >> split-up and finally add functionality.
> >>
> >> So ideally:
> >> 1. Use macros for preprocessor defines (where you move to BIT/GENMASK)
> >> 2. Split
> >> 3. Add EDMA macros etc.
> >> 4. Add ColdFire mcf5441x edma support
> >>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
Stefan Agner Aug. 10, 2018, 8:05 a.m. UTC | #8
On 10.08.2018 00:37, Angelo Dureghello wrote:
> Hi Stefan,
> 
> i am about to post a v9 in short.
> 
> On Tue, Aug 07, 2018 at 07:47:19PM +0200, Stefan Agner wrote:
>> On 07.08.2018 14:14, Krzysztof Kozlowski wrote:
>> > On 7 August 2018 at 10:08, Stefan Agner <stefan@agner.ch> wrote:
>> >> On 03.08.2018 21:32, Angelo Dureghello wrote:
>> >>> This patch adds a new fsl-edma-common module to allow new
>> >>> mcf-edma module code to use most of the fsl-edma code.
>> >>>
>> >>> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
>> >>> ---
>> >>> Changes for v2:
>> >>> - patch splitted into 4
>> >>> - add mcf-edma as minimal different parts from fsl-edma
>> >>>
>> >>> Changes for v3:
>> >>> none
>> >>>
>> >>> Changes for v4:
>> >>> - patch simplified from 4/4 into 2/2
>> >>> - collecting all the mcf-edma-related changes
>> >>>
>> >>> Changes for v5:
>> >>> none
>> >>>
>> >>> Changes for v6:
>> >>> - adjusted comment header
>> >>> - fixed bit shift with BIT()
>> >>> - we need to free the interrupts at remove(), so removed all devm_
>> >>>   interrupt related calls
>> >>>
>> >>> Changes for v7:
>> >>> none
>> >>>
>> >>> Changes for v8:
>> >>> - patch rewritten from scratch, splitted into 3, common code isolated,
>> >>>   minimal changes from the original Freescale code have been done.
>> >>>   The patch has been tested with both Iris + Colibri Vybrid VF50 and
>> >>>   stmark2/mcf54415 Coldfire boards.
>> >>> ---
>> >>>  drivers/dma/Makefile          |   2 +-
>> >>>  drivers/dma/fsl-edma-common.c | 576 ++++++++++++++++++++++++++++
>> >>>  drivers/dma/fsl-edma-common.h | 196 ++++++++++
>> >>>  drivers/dma/fsl-edma.c        | 697 +---------------------------------
>> >>>  4 files changed, 774 insertions(+), 697 deletions(-)
>> >>>  create mode 100644 drivers/dma/fsl-edma-common.c
>> >>>  create mode 100644 drivers/dma/fsl-edma-common.h
>> >>>
>> >>> diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
>> >>> index 203a99d68315..66022f59fca4 100644
>> >>> --- a/drivers/dma/Makefile
>> >>> +++ b/drivers/dma/Makefile
>> >>> @@ -31,7 +31,7 @@ obj-$(CONFIG_DW_AXI_DMAC) += dw-axi-dmac/
>> >>>  obj-$(CONFIG_DW_DMAC_CORE) += dw/
>> >>>  obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
>> >>>  obj-$(CONFIG_FSL_DMA) += fsldma.o
>> >>> -obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
>> >>> +obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
>> >>>  obj-$(CONFIG_FSL_RAID) += fsl_raid.o
>> >>>  obj-$(CONFIG_HSU_DMA) += hsu/
>> >>>  obj-$(CONFIG_IMG_MDC_DMA) += img-mdc-dma.o
>> >>> diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
>> >>> new file mode 100644
>> >>> index 000000000000..0ae7094f477a
>> >>> --- /dev/null
>> >>> +++ b/drivers/dma/fsl-edma-common.c
>> >>> @@ -0,0 +1,576 @@
>> >>> +// SPDX-License-Identifier: GPL-2.0
>> >>> +//
>> >>> +// Copyright (c) 2013-2014 Freescale Semiconductor, Inc
>> >>> +// Copyright (c) 2017 Sysam, Angelo Dureghello  <angelo@sysam.it>
>> >>> +
>> >>> +#include <linux/dmapool.h>
>> >>> +#include <linux/module.h>
>> >>> +#include <linux/slab.h>
>> >>> +
>> >>> +#include "fsl-edma-common.h"
>> >>> +
>> >>> +/*
>> >>> + * R/W functions for big- or little-endian registers:
>> >>> + * The eDMA controller's endian is independent of the CPU core's endian.
>> >>> + * For the big-endian IP module, the offset for 8-bit or 16-bit registers
>> >>> + * should also be swapped opposite to that in little-endian IP.
>> >>> + */
>> >>> +u32 edma_readl(struct fsl_edma_engine *edma, void __iomem *addr)
>> >>> +{
>> >>> +     if (edma->big_endian)
>> >>> +             return ioread32be(addr);
>> >>> +     else
>> >>> +             return ioread32(addr);
>> >>> +}
>> >>> +EXPORT_SYMBOL_GPL(edma_readl);
>> >>
>> >> In 3/3 you link the common object into the two modules individually:
>> >>
>> >> obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
>> >> obj-$(CONFIG_MCF_EDMA) += mcf-edma.o fsl-edma-common.o
>> >>
>> >> Therefor you do not access those functions from another module (they are
>> >> within the module). No exporting should be necessary. Drop all those
>> >> exports.
>> >
>> > The fsl-edma-common will be its own module so the exports are
>> > necessary for proper linking/modpost.
>>
>> Hm, oh I see, I got that wrong.
>>
>> We could use
>> fsl-edma-all-y = fsl-edma.o fsl-edma-common.o
>> obj-$(CONFIG_FSL_EDMA) += fsl-edma-all.o
>> mcf-edma-all-y = mcf-edma.o fsl-edma-common.o
>> obj-$(CONFIG_MCF_EDMA) += mcf-edma-all.o
>>
>> to create two modules but that duplicates some code. It probably
>> wouldn't matter in practise since the two IPs are used on different
>> architecture...
>>
>> However, if we stay with the three modules approach, we should introduce
>> a hidden config symbol, e.g.
>>
>> config FSL_EDMA_COMMON
>> 	tristate
>>
>> In FSL_EDMA/MCF_EDMA use
>> 	select FSL_EDMA_COMMON
>>
>> And in the Makefile
>> obj-$(CONFIG_FSL_EDMA_COMMON) += fsl-edma-common.o
>> obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
>> obj-$(CONFIG_MCF_EDMA) += mcf-edma.o
>>
>>
> There was already a discussion with Vinod and Geert on this, and i 
> finally previously changed things in this way 
> 
> obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
> 
> The idea was to simplify things avoiding to use an additional
> config symbol, as i did initially. It's a common pattern in 
> several Makefiles (e.g.drivers/net/ethernet/8390/Makefile and 
> drivers/scsi/Makefile).
> Also we have a single common code part since obj-y is a list, 
> and IIRC it's filtered for duplicates.
> So if can be ok for you too, i would not roll back again.
> 

I see, you refer to this discussion:
https://www.spinics.net/lists/dmaengine/msg15863.html

Should have followed up on those discussions, sorry. Leave it as is
then.

>> However, I do not like that the compiler can no longer inline simple
>> acesors like edma_(readl|writel). So if we stay with the three modules
>> approach then move at least the accesors and
>> to_fsl_edma_chan/to_fsl_edma_desc as inline functions to the header
>> file.
>>
> I agree too, my initial patch was a single separate driver. But it
> resulted in too much duplicated code, so a common module has been
> required. Btw, seems i cannot inline those functions. fsl-edma-common.h 
> is included from both fsl-edma-common.c and mcf/fsl-edma.c resulting
> in multiple definitions linking error.

I agree, we should introduce the common module and share as much as
possible.

Just those small accessors typically get inlined by the compiler, and
often collapse completely in optimization phases (e.g. a function call
has more overhead than just inlining them, making resulting code smaller
and faster).

Just define them as static inline, then it won't lead to linking errors.

I tried with this change in fsl-edma-common.h (and remove them from
fsl-edma-common.c):

-u32 edma_readl(struct fsl_edma_engine *edma, void __iomem *addr);
-void edma_writeb(struct fsl_edma_engine *edma, u8 val, void __iomem
*addr);
-void edma_writew(struct fsl_edma_engine *edma, u16 val, void __iomem
*addr);
-void edma_writel(struct fsl_edma_engine *edma, u32 val, void __iomem
*addr);
-
-struct fsl_edma_chan *to_fsl_edma_chan(struct dma_chan *chan);
-struct fsl_edma_desc *to_fsl_edma_desc(struct virt_dma_desc *vd);
+/*
+ * R/W functions for big- or little-endian registers:
+ * The eDMA controller's endian is independent of the CPU core's
endian.
+ * For the big-endian IP module, the offset for 8-bit or 16-bit
registers
+ * should also be swapped opposite to that in little-endian IP.
+ */
+static inline u32 edma_readl(struct fsl_edma_engine *edma, void __iomem
*addr)
+{
+       if (edma->big_endian)
+               return ioread32be(addr);
+       else
+               return ioread32(addr);
+}
+
+static inline void edma_writeb(struct fsl_edma_engine *edma, u8 val,
void __iomem *addr)
+{
+       /* swap the reg offset for these in big-endian mode */
+       if (edma->big_endian)
+               iowrite8(val, (void __iomem *)((unsigned long)addr ^
0x3));
+       else
+               iowrite8(val, addr);
+}
+
+static inline void edma_writew(struct fsl_edma_engine *edma, u16 val,
void __iomem *addr)
+{
+       /* swap the reg offset for these in big-endian mode */
+       if (edma->big_endian)
+               iowrite16be(val, (void __iomem *)((unsigned long)addr ^
0x2));
+       else
+               iowrite16(val, addr);
+}
+
+static inline void edma_writel(struct fsl_edma_engine *edma, u32 val,
void __iomem *addr)
+{
+       if (edma->big_endian)
+               iowrite32be(val, addr);
+       else
+               iowrite32(val, addr);
+}
+
+static inline struct fsl_edma_chan *to_fsl_edma_chan(struct dma_chan
*chan)
+{
+       return container_of(chan, struct fsl_edma_chan, vchan.chan);
+}
+
+static inline struct fsl_edma_desc *to_fsl_edma_desc(struct
virt_dma_desc *vd)
+{
+       return container_of(vd, struct fsl_edma_desc, vdesc);
+}


All three kernel modules end up being smaller (overall more than 1kB),
so the compiler really does its magic.

> 
> Mainly until v7 there was several discussions and a first approval, 
> if possible i would not change again heavily the patch structure for
> a bug that seemss already been fixed.
> 
> So i fixed all the possible points of this thread and organized next 
> patch as 
> 
> 1/4 dmaengine: fsl-edma: extract common fsl-edma code (no changes ..
> 2/4 dmaengine: fsl-edma: add edma version and configurable registers
> 3/4 dmaengine: fsl-edma: fix macros
> 4/4 dmaengine: fsl-edma: add ColdFire mcf5441x edma support

That seems sensible. One minor nit in Kconfig still:

--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -320,6 +320,17 @@ config LPC18XX_DMAMUX
       Enable support for DMA on NXP LPC18xx/43xx platforms
       with PL080 and multiplexed DMA request lines.
 
+config MCF_EDMA
+    tristate "Freescale eDMA engine support, ColdFire mcf5441x SoCs"
+    depends on M5441x

Can you add " || COMPILE_TEST" here, this helps for automated testing.

--
Stefan

> 
> Let me know if you have any other point or if can proceed.
> 
> Best regards,
> Angelo Dureghello
> 
>> --
>> Stefan
>>
>> >
>> > Best regards,
>> > Krzysztof
>> >
>> >> If possible I would prefer if you start with cleanup/conversions, then
>> >> split-up and finally add functionality.
>> >>
>> >> So ideally:
>> >> 1. Use macros for preprocessor defines (where you move to BIT/GENMASK)
>> >> 2. Split
>> >> 3. Add EDMA macros etc.
>> >> 4. Add ColdFire mcf5441x edma support
>> >>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
Angelo Dureghello Aug. 10, 2018, 8:43 a.m. UTC | #9
Hi Stefan,

On Fri, Aug 10, 2018 at 10:05:06AM +0200, Stefan Agner wrote:
> On 10.08.2018 00:37, Angelo Dureghello wrote:
> > Hi Stefan,
> > 
> > i am about to post a v9 in short.
> > 
> > On Tue, Aug 07, 2018 at 07:47:19PM +0200, Stefan Agner wrote:
> >> On 07.08.2018 14:14, Krzysztof Kozlowski wrote:
> >> > On 7 August 2018 at 10:08, Stefan Agner <stefan@agner.ch> wrote:
> >> >> On 03.08.2018 21:32, Angelo Dureghello wrote:
> >> >>> This patch adds a new fsl-edma-common module to allow new
> >> >>> mcf-edma module code to use most of the fsl-edma code.
> >> >>>
> >> >>> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
> >> >>> ---
> >> >>> Changes for v2:
> >> >>> - patch splitted into 4
> >> >>> - add mcf-edma as minimal different parts from fsl-edma
> >> >>>
> >> >>> Changes for v3:
> >> >>> none
> >> >>>
> >> >>> Changes for v4:
> >> >>> - patch simplified from 4/4 into 2/2
> >> >>> - collecting all the mcf-edma-related changes
> >> >>>
> >> >>> Changes for v5:
> >> >>> none
> >> >>>
> >> >>> Changes for v6:
> >> >>> - adjusted comment header
> >> >>> - fixed bit shift with BIT()
> >> >>> - we need to free the interrupts at remove(), so removed all devm_
> >> >>>   interrupt related calls
> >> >>>
> >> >>> Changes for v7:
> >> >>> none
> >> >>>
> >> >>> Changes for v8:
> >> >>> - patch rewritten from scratch, splitted into 3, common code isolated,
> >> >>>   minimal changes from the original Freescale code have been done.
> >> >>>   The patch has been tested with both Iris + Colibri Vybrid VF50 and
> >> >>>   stmark2/mcf54415 Coldfire boards.
> >> >>> ---
> >> >>>  drivers/dma/Makefile          |   2 +-
> >> >>>  drivers/dma/fsl-edma-common.c | 576 ++++++++++++++++++++++++++++
> >> >>>  drivers/dma/fsl-edma-common.h | 196 ++++++++++
> >> >>>  drivers/dma/fsl-edma.c        | 697 +---------------------------------
> >> >>>  4 files changed, 774 insertions(+), 697 deletions(-)
> >> >>>  create mode 100644 drivers/dma/fsl-edma-common.c
> >> >>>  create mode 100644 drivers/dma/fsl-edma-common.h
> >> >>>
> >> >>> diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
> >> >>> index 203a99d68315..66022f59fca4 100644
> >> >>> --- a/drivers/dma/Makefile
> >> >>> +++ b/drivers/dma/Makefile
> >> >>> @@ -31,7 +31,7 @@ obj-$(CONFIG_DW_AXI_DMAC) += dw-axi-dmac/
> >> >>>  obj-$(CONFIG_DW_DMAC_CORE) += dw/
> >> >>>  obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
> >> >>>  obj-$(CONFIG_FSL_DMA) += fsldma.o
> >> >>> -obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
> >> >>> +obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
> >> >>>  obj-$(CONFIG_FSL_RAID) += fsl_raid.o
> >> >>>  obj-$(CONFIG_HSU_DMA) += hsu/
> >> >>>  obj-$(CONFIG_IMG_MDC_DMA) += img-mdc-dma.o
> >> >>> diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
> >> >>> new file mode 100644
> >> >>> index 000000000000..0ae7094f477a
> >> >>> --- /dev/null
> >> >>> +++ b/drivers/dma/fsl-edma-common.c
> >> >>> @@ -0,0 +1,576 @@
> >> >>> +// SPDX-License-Identifier: GPL-2.0
> >> >>> +//
> >> >>> +// Copyright (c) 2013-2014 Freescale Semiconductor, Inc
> >> >>> +// Copyright (c) 2017 Sysam, Angelo Dureghello  <angelo@sysam.it>
> >> >>> +
> >> >>> +#include <linux/dmapool.h>
> >> >>> +#include <linux/module.h>
> >> >>> +#include <linux/slab.h>
> >> >>> +
> >> >>> +#include "fsl-edma-common.h"
> >> >>> +
> >> >>> +/*
> >> >>> + * R/W functions for big- or little-endian registers:
> >> >>> + * The eDMA controller's endian is independent of the CPU core's endian.
> >> >>> + * For the big-endian IP module, the offset for 8-bit or 16-bit registers
> >> >>> + * should also be swapped opposite to that in little-endian IP.
> >> >>> + */
> >> >>> +u32 edma_readl(struct fsl_edma_engine *edma, void __iomem *addr)
> >> >>> +{
> >> >>> +     if (edma->big_endian)
> >> >>> +             return ioread32be(addr);
> >> >>> +     else
> >> >>> +             return ioread32(addr);
> >> >>> +}
> >> >>> +EXPORT_SYMBOL_GPL(edma_readl);
> >> >>
> >> >> In 3/3 you link the common object into the two modules individually:
> >> >>
> >> >> obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
> >> >> obj-$(CONFIG_MCF_EDMA) += mcf-edma.o fsl-edma-common.o
> >> >>
> >> >> Therefor you do not access those functions from another module (they are
> >> >> within the module). No exporting should be necessary. Drop all those
> >> >> exports.
> >> >
> >> > The fsl-edma-common will be its own module so the exports are
> >> > necessary for proper linking/modpost.
> >>
> >> Hm, oh I see, I got that wrong.
> >>
> >> We could use
> >> fsl-edma-all-y = fsl-edma.o fsl-edma-common.o
> >> obj-$(CONFIG_FSL_EDMA) += fsl-edma-all.o
> >> mcf-edma-all-y = mcf-edma.o fsl-edma-common.o
> >> obj-$(CONFIG_MCF_EDMA) += mcf-edma-all.o
> >>
> >> to create two modules but that duplicates some code. It probably
> >> wouldn't matter in practise since the two IPs are used on different
> >> architecture...
> >>
> >> However, if we stay with the three modules approach, we should introduce
> >> a hidden config symbol, e.g.
> >>
> >> config FSL_EDMA_COMMON
> >> 	tristate
> >>
> >> In FSL_EDMA/MCF_EDMA use
> >> 	select FSL_EDMA_COMMON
> >>
> >> And in the Makefile
> >> obj-$(CONFIG_FSL_EDMA_COMMON) += fsl-edma-common.o
> >> obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
> >> obj-$(CONFIG_MCF_EDMA) += mcf-edma.o
> >>
> >>
> > There was already a discussion with Vinod and Geert on this, and i 
> > finally previously changed things in this way 
> > 
> > obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
> > 
> > The idea was to simplify things avoiding to use an additional
> > config symbol, as i did initially. It's a common pattern in 
> > several Makefiles (e.g.drivers/net/ethernet/8390/Makefile and 
> > drivers/scsi/Makefile).
> > Also we have a single common code part since obj-y is a list, 
> > and IIRC it's filtered for duplicates.
> > So if can be ok for you too, i would not roll back again.
> > 
> 
> I see, you refer to this discussion:
> https://www.spinics.net/lists/dmaengine/msg15863.html
> 
> Should have followed up on those discussions, sorry. Leave it as is
> then.
> 
> >> However, I do not like that the compiler can no longer inline simple
> >> acesors like edma_(readl|writel). So if we stay with the three modules
> >> approach then move at least the accesors and
> >> to_fsl_edma_chan/to_fsl_edma_desc as inline functions to the header
> >> file.
> >>
> > I agree too, my initial patch was a single separate driver. But it
> > resulted in too much duplicated code, so a common module has been
> > required. Btw, seems i cannot inline those functions. fsl-edma-common.h 
> > is included from both fsl-edma-common.c and mcf/fsl-edma.c resulting
> > in multiple definitions linking error.
> 
> I agree, we should introduce the common module and share as much as
> possible.
> 
> Just those small accessors typically get inlined by the compiler, and
> often collapse completely in optimization phases (e.g. a function call
> has more overhead than just inlining them, making resulting code smaller
> and faster).
> 
> Just define them as static inline, then it won't lead to linking errors.
> 
> I tried with this change in fsl-edma-common.h (and remove them from
> fsl-edma-common.c):
> 
> -u32 edma_readl(struct fsl_edma_engine *edma, void __iomem *addr);
> -void edma_writeb(struct fsl_edma_engine *edma, u8 val, void __iomem
> *addr);
> -void edma_writew(struct fsl_edma_engine *edma, u16 val, void __iomem
> *addr);
> -void edma_writel(struct fsl_edma_engine *edma, u32 val, void __iomem
> *addr);
> -
> -struct fsl_edma_chan *to_fsl_edma_chan(struct dma_chan *chan);
> -struct fsl_edma_desc *to_fsl_edma_desc(struct virt_dma_desc *vd);
> +/*
> + * R/W functions for big- or little-endian registers:
> + * The eDMA controller's endian is independent of the CPU core's
> endian.
> + * For the big-endian IP module, the offset for 8-bit or 16-bit
> registers
> + * should also be swapped opposite to that in little-endian IP.
> + */
> +static inline u32 edma_readl(struct fsl_edma_engine *edma, void __iomem
> *addr)
> +{
> +       if (edma->big_endian)
> +               return ioread32be(addr);
> +       else
> +               return ioread32(addr);
> +}
> +
> +static inline void edma_writeb(struct fsl_edma_engine *edma, u8 val,
> void __iomem *addr)
> +{
> +       /* swap the reg offset for these in big-endian mode */
> +       if (edma->big_endian)
> +               iowrite8(val, (void __iomem *)((unsigned long)addr ^
> 0x3));
> +       else
> +               iowrite8(val, addr);
> +}
> +
> +static inline void edma_writew(struct fsl_edma_engine *edma, u16 val,
> void __iomem *addr)
> +{
> +       /* swap the reg offset for these in big-endian mode */
> +       if (edma->big_endian)
> +               iowrite16be(val, (void __iomem *)((unsigned long)addr ^
> 0x2));
> +       else
> +               iowrite16(val, addr);
> +}
> +
> +static inline void edma_writel(struct fsl_edma_engine *edma, u32 val,
> void __iomem *addr)
> +{
> +       if (edma->big_endian)
> +               iowrite32be(val, addr);
> +       else
> +               iowrite32(val, addr);
> +}
> +
> +static inline struct fsl_edma_chan *to_fsl_edma_chan(struct dma_chan
> *chan)
> +{
> +       return container_of(chan, struct fsl_edma_chan, vchan.chan);
> +}
> +
> +static inline struct fsl_edma_desc *to_fsl_edma_desc(struct
> virt_dma_desc *vd)
> +{
> +       return container_of(vd, struct fsl_edma_desc, vdesc);
> +}
> 
> 
> All three kernel modules end up being smaller (overall more than 1kB),
> so the compiler really does its magic.
>
Great, will change as above.
 
> > 
> > Mainly until v7 there was several discussions and a first approval, 
> > if possible i would not change again heavily the patch structure for
> > a bug that seemss already been fixed.
> > 
> > So i fixed all the possible points of this thread and organized next 
> > patch as 
> > 
> > 1/4 dmaengine: fsl-edma: extract common fsl-edma code (no changes ..
> > 2/4 dmaengine: fsl-edma: add edma version and configurable registers
> > 3/4 dmaengine: fsl-edma: fix macros
> > 4/4 dmaengine: fsl-edma: add ColdFire mcf5441x edma support
> 
> That seems sensible. One minor nit in Kconfig still:
> 
> --- a/drivers/dma/Kconfig
> +++ b/drivers/dma/Kconfig
> @@ -320,6 +320,17 @@ config LPC18XX_DMAMUX
>        Enable support for DMA on NXP LPC18xx/43xx platforms
>        with PL080 and multiplexed DMA request lines.
>  
> +config MCF_EDMA
> +    tristate "Freescale eDMA engine support, ColdFire mcf5441x SoCs"
> +    depends on M5441x
> 
> Can you add " || COMPILE_TEST" here, this helps for automated testing.
> 

The compile test robot is already being run, not sure why. 
I can add it anyway.

Ok, so if no other points, i will proceed on a v9 after these 2 changes.

> --
> Stefan
> 
> > 
> > Let me know if you have any other point or if can proceed.
> > 
> > Best regards,
> > Angelo Dureghello
> > 
> >> --
> >> Stefan
> >>
> >> >
> >> > Best regards,
> >> > Krzysztof
> >> >
> >> >> If possible I would prefer if you start with cleanup/conversions, then
> >> >> split-up and finally add functionality.
> >> >>
> >> >> So ideally:
> >> >> 1. Use macros for preprocessor defines (where you move to BIT/GENMASK)
> >> >> 2. Split
> >> >> 3. Add EDMA macros etc.
> >> >> 4. Add ColdFire mcf5441x edma support
> >> >>
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
> >> the body of a message to majordomo@vger.kernel.org
> >> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Regards,
Angelo Dureghello
diff mbox series

Patch

diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 203a99d68315..66022f59fca4 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -31,7 +31,7 @@  obj-$(CONFIG_DW_AXI_DMAC) += dw-axi-dmac/
 obj-$(CONFIG_DW_DMAC_CORE) += dw/
 obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
 obj-$(CONFIG_FSL_DMA) += fsldma.o
-obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
+obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
 obj-$(CONFIG_FSL_RAID) += fsl_raid.o
 obj-$(CONFIG_HSU_DMA) += hsu/
 obj-$(CONFIG_IMG_MDC_DMA) += img-mdc-dma.o
diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
new file mode 100644
index 000000000000..0ae7094f477a
--- /dev/null
+++ b/drivers/dma/fsl-edma-common.c
@@ -0,0 +1,576 @@ 
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2013-2014 Freescale Semiconductor, Inc
+// Copyright (c) 2017 Sysam, Angelo Dureghello  <angelo@sysam.it>
+
+#include <linux/dmapool.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "fsl-edma-common.h"
+
+/*
+ * R/W functions for big- or little-endian registers:
+ * The eDMA controller's endian is independent of the CPU core's endian.
+ * For the big-endian IP module, the offset for 8-bit or 16-bit registers
+ * should also be swapped opposite to that in little-endian IP.
+ */
+u32 edma_readl(struct fsl_edma_engine *edma, void __iomem *addr)
+{
+	if (edma->big_endian)
+		return ioread32be(addr);
+	else
+		return ioread32(addr);
+}
+EXPORT_SYMBOL_GPL(edma_readl);
+
+void edma_writeb(struct fsl_edma_engine *edma, u8 val, void __iomem *addr)
+{
+	/* swap the reg offset for these in big-endian mode */
+	if (edma->big_endian)
+		iowrite8(val, (void __iomem *)((unsigned long)addr ^ 0x3));
+	else
+		iowrite8(val, addr);
+}
+EXPORT_SYMBOL_GPL(edma_writeb);
+
+void edma_writew(struct fsl_edma_engine *edma, u16 val, void __iomem *addr)
+{
+	/* swap the reg offset for these in big-endian mode */
+	if (edma->big_endian)
+		iowrite16be(val, (void __iomem *)((unsigned long)addr ^ 0x2));
+	else
+		iowrite16(val, addr);
+}
+EXPORT_SYMBOL_GPL(edma_writew);
+
+void edma_writel(struct fsl_edma_engine *edma, u32 val, void __iomem *addr)
+{
+	if (edma->big_endian)
+		iowrite32be(val, addr);
+	else
+		iowrite32(val, addr);
+}
+EXPORT_SYMBOL_GPL(edma_writel);
+
+struct fsl_edma_chan *to_fsl_edma_chan(struct dma_chan *chan)
+{
+	return container_of(chan, struct fsl_edma_chan, vchan.chan);
+}
+EXPORT_SYMBOL_GPL(to_fsl_edma_chan);
+
+struct fsl_edma_desc *to_fsl_edma_desc(struct virt_dma_desc *vd)
+{
+	return container_of(vd, struct fsl_edma_desc, vdesc);
+}
+EXPORT_SYMBOL_GPL(to_fsl_edma_desc);
+
+static void fsl_edma_enable_request(struct fsl_edma_chan *fsl_chan)
+{
+	void __iomem *addr = fsl_chan->edma->membase;
+	u32 ch = fsl_chan->vchan.chan.chan_id;
+
+	edma_writeb(fsl_chan->edma, EDMA_SEEI_SEEI(ch), addr + EDMA_SEEI);
+	edma_writeb(fsl_chan->edma, ch, addr + EDMA_SERQ);
+}
+
+void fsl_edma_disable_request(struct fsl_edma_chan *fsl_chan)
+{
+	void __iomem *addr = fsl_chan->edma->membase;
+	u32 ch = fsl_chan->vchan.chan.chan_id;
+
+	edma_writeb(fsl_chan->edma, ch, addr + EDMA_CERQ);
+	edma_writeb(fsl_chan->edma, EDMA_CEEI_CEEI(ch), addr + EDMA_CEEI);
+}
+EXPORT_SYMBOL_GPL(fsl_edma_disable_request);
+
+void fsl_edma_chan_mux(struct fsl_edma_chan *fsl_chan,
+			unsigned int slot, bool enable)
+{
+	u32 ch = fsl_chan->vchan.chan.chan_id;
+	void __iomem *muxaddr;
+	unsigned int chans_per_mux, ch_off;
+
+	chans_per_mux = fsl_chan->edma->n_chans / DMAMUX_NR;
+	ch_off = fsl_chan->vchan.chan.chan_id % chans_per_mux;
+	muxaddr = fsl_chan->edma->muxbase[ch / chans_per_mux];
+	slot = EDMAMUX_CHCFG_SOURCE(slot);
+
+	if (enable)
+		iowrite8(EDMAMUX_CHCFG_ENBL | slot, muxaddr + ch_off);
+	else
+		iowrite8(EDMAMUX_CHCFG_DIS, muxaddr + ch_off);
+}
+EXPORT_SYMBOL_GPL(fsl_edma_chan_mux);
+
+static unsigned int fsl_edma_get_tcd_attr(enum dma_slave_buswidth addr_width)
+{
+	switch (addr_width) {
+	case 1:
+		return EDMA_TCD_ATTR_SSIZE_8BIT | EDMA_TCD_ATTR_DSIZE_8BIT;
+	case 2:
+		return EDMA_TCD_ATTR_SSIZE_16BIT | EDMA_TCD_ATTR_DSIZE_16BIT;
+	case 4:
+		return EDMA_TCD_ATTR_SSIZE_32BIT | EDMA_TCD_ATTR_DSIZE_32BIT;
+	case 8:
+		return EDMA_TCD_ATTR_SSIZE_64BIT | EDMA_TCD_ATTR_DSIZE_64BIT;
+	default:
+		return EDMA_TCD_ATTR_SSIZE_32BIT | EDMA_TCD_ATTR_DSIZE_32BIT;
+	}
+}
+
+void fsl_edma_free_desc(struct virt_dma_desc *vdesc)
+{
+	struct fsl_edma_desc *fsl_desc;
+	int i;
+
+	fsl_desc = to_fsl_edma_desc(vdesc);
+	for (i = 0; i < fsl_desc->n_tcds; i++)
+		dma_pool_free(fsl_desc->echan->tcd_pool, fsl_desc->tcd[i].vtcd,
+			      fsl_desc->tcd[i].ptcd);
+	kfree(fsl_desc);
+}
+EXPORT_SYMBOL_GPL(fsl_edma_free_desc);
+
+int fsl_edma_terminate_all(struct dma_chan *chan)
+{
+	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
+	unsigned long flags;
+	LIST_HEAD(head);
+
+	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
+	fsl_edma_disable_request(fsl_chan);
+	fsl_chan->edesc = NULL;
+	fsl_chan->idle = true;
+	vchan_get_all_descriptors(&fsl_chan->vchan, &head);
+	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
+	vchan_dma_desc_free_list(&fsl_chan->vchan, &head);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fsl_edma_terminate_all);
+
+int fsl_edma_pause(struct dma_chan *chan)
+{
+	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
+	unsigned long flags;
+
+	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
+	if (fsl_chan->edesc) {
+		fsl_edma_disable_request(fsl_chan);
+		fsl_chan->status = DMA_PAUSED;
+		fsl_chan->idle = true;
+	}
+	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fsl_edma_pause);
+
+int fsl_edma_resume(struct dma_chan *chan)
+{
+	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
+	unsigned long flags;
+
+	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
+	if (fsl_chan->edesc) {
+		fsl_edma_enable_request(fsl_chan);
+		fsl_chan->status = DMA_IN_PROGRESS;
+		fsl_chan->idle = false;
+	}
+	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fsl_edma_resume);
+
+int fsl_edma_slave_config(struct dma_chan *chan,
+				 struct dma_slave_config *cfg)
+{
+	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
+
+	fsl_chan->fsc.dir = cfg->direction;
+	if (cfg->direction == DMA_DEV_TO_MEM) {
+		fsl_chan->fsc.dev_addr = cfg->src_addr;
+		fsl_chan->fsc.addr_width = cfg->src_addr_width;
+		fsl_chan->fsc.burst = cfg->src_maxburst;
+		fsl_chan->fsc.attr = fsl_edma_get_tcd_attr(cfg->src_addr_width);
+	} else if (cfg->direction == DMA_MEM_TO_DEV) {
+		fsl_chan->fsc.dev_addr = cfg->dst_addr;
+		fsl_chan->fsc.addr_width = cfg->dst_addr_width;
+		fsl_chan->fsc.burst = cfg->dst_maxburst;
+		fsl_chan->fsc.attr = fsl_edma_get_tcd_attr(cfg->dst_addr_width);
+	} else
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fsl_edma_slave_config);
+
+static size_t fsl_edma_desc_residue(struct fsl_edma_chan *fsl_chan,
+		struct virt_dma_desc *vdesc, bool in_progress)
+{
+	struct fsl_edma_desc *edesc = fsl_chan->edesc;
+	void __iomem *addr = fsl_chan->edma->membase;
+	u32 ch = fsl_chan->vchan.chan.chan_id;
+	enum dma_transfer_direction dir = fsl_chan->fsc.dir;
+	dma_addr_t cur_addr, dma_addr;
+	size_t len, size;
+	int i;
+
+	/* calculate the total size in this desc */
+	for (len = i = 0; i < fsl_chan->edesc->n_tcds; i++)
+		len += le32_to_cpu(edesc->tcd[i].vtcd->nbytes)
+			* le16_to_cpu(edesc->tcd[i].vtcd->biter);
+
+	if (!in_progress)
+		return len;
+
+	if (dir == DMA_MEM_TO_DEV)
+		cur_addr = edma_readl(
+			fsl_chan->edma, addr + EDMA_TCD_SADDR(ch));
+	else
+		cur_addr = edma_readl(
+			fsl_chan->edma, addr + EDMA_TCD_DADDR(ch));
+
+	/* figure out the finished and calculate the residue */
+	for (i = 0; i < fsl_chan->edesc->n_tcds; i++) {
+		size = le32_to_cpu(edesc->tcd[i].vtcd->nbytes)
+			* le16_to_cpu(edesc->tcd[i].vtcd->biter);
+		if (dir == DMA_MEM_TO_DEV)
+			dma_addr = le32_to_cpu(edesc->tcd[i].vtcd->saddr);
+		else
+			dma_addr = le32_to_cpu(edesc->tcd[i].vtcd->daddr);
+
+		len -= size;
+		if (cur_addr >= dma_addr && cur_addr < dma_addr + size) {
+			len += dma_addr + size - cur_addr;
+			break;
+		}
+	}
+
+	return len;
+}
+
+enum dma_status fsl_edma_tx_status(struct dma_chan *chan,
+		dma_cookie_t cookie, struct dma_tx_state *txstate)
+{
+	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
+	struct virt_dma_desc *vdesc;
+	enum dma_status status;
+	unsigned long flags;
+
+	status = dma_cookie_status(chan, cookie, txstate);
+	if (status == DMA_COMPLETE)
+		return status;
+
+	if (!txstate)
+		return fsl_chan->status;
+
+	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
+	vdesc = vchan_find_desc(&fsl_chan->vchan, cookie);
+	if (fsl_chan->edesc && cookie == fsl_chan->edesc->vdesc.tx.cookie)
+		txstate->residue =
+			fsl_edma_desc_residue(fsl_chan, vdesc, true);
+	else if (vdesc)
+		txstate->residue =
+			fsl_edma_desc_residue(fsl_chan, vdesc, false);
+	else
+		txstate->residue = 0;
+
+	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
+
+	return fsl_chan->status;
+}
+EXPORT_SYMBOL_GPL(fsl_edma_tx_status);
+
+static void fsl_edma_set_tcd_regs(struct fsl_edma_chan *fsl_chan,
+				  struct fsl_edma_hw_tcd *tcd)
+{
+	struct fsl_edma_engine *edma = fsl_chan->edma;
+	void __iomem *addr = fsl_chan->edma->membase;
+	u32 ch = fsl_chan->vchan.chan.chan_id;
+
+	/*
+	 * TCD parameters are stored in struct fsl_edma_hw_tcd in little
+	 * endian format. However, we need to load the TCD registers in
+	 * big- or little-endian obeying the eDMA engine model endian.
+	 */
+	edma_writew(edma, 0, addr + EDMA_TCD_CSR(ch));
+	edma_writel(edma, le32_to_cpu(tcd->saddr), addr + EDMA_TCD_SADDR(ch));
+	edma_writel(edma, le32_to_cpu(tcd->daddr), addr + EDMA_TCD_DADDR(ch));
+
+	edma_writew(edma, le16_to_cpu(tcd->attr), addr + EDMA_TCD_ATTR(ch));
+	edma_writew(edma, le16_to_cpu(tcd->soff), addr + EDMA_TCD_SOFF(ch));
+
+	edma_writel(edma, le32_to_cpu(tcd->nbytes), addr + EDMA_TCD_NBYTES(ch));
+	edma_writel(edma, le32_to_cpu(tcd->slast), addr + EDMA_TCD_SLAST(ch));
+
+	edma_writew(edma, le16_to_cpu(tcd->citer), addr + EDMA_TCD_CITER(ch));
+	edma_writew(edma, le16_to_cpu(tcd->biter), addr + EDMA_TCD_BITER(ch));
+	edma_writew(edma, le16_to_cpu(tcd->doff), addr + EDMA_TCD_DOFF(ch));
+
+	edma_writel(edma,
+		    le32_to_cpu(tcd->dlast_sga), addr + EDMA_TCD_DLAST_SGA(ch));
+
+	edma_writew(edma, le16_to_cpu(tcd->csr), addr + EDMA_TCD_CSR(ch));
+}
+
+static inline
+void fsl_edma_fill_tcd(struct fsl_edma_hw_tcd *tcd, u32 src, u32 dst,
+		       u16 attr, u16 soff, u32 nbytes, u32 slast, u16 citer,
+		       u16 biter, u16 doff, u32 dlast_sga, bool major_int,
+		       bool disable_req, bool enable_sg)
+{
+	u16 csr = 0;
+
+	/*
+	 * eDMA hardware SGs require the TCDs to be stored in little
+	 * endian format irrespective of the register endian model.
+	 * So we put the value in little endian in memory, waiting
+	 * for fsl_edma_set_tcd_regs doing the swap.
+	 */
+	tcd->saddr = cpu_to_le32(src);
+	tcd->daddr = cpu_to_le32(dst);
+
+	tcd->attr = cpu_to_le16(attr);
+
+	tcd->soff = cpu_to_le16(EDMA_TCD_SOFF_SOFF(soff));
+
+	tcd->nbytes = cpu_to_le32(EDMA_TCD_NBYTES_NBYTES(nbytes));
+	tcd->slast = cpu_to_le32(EDMA_TCD_SLAST_SLAST(slast));
+
+	tcd->citer = cpu_to_le16(EDMA_TCD_CITER_CITER(citer));
+	tcd->doff = cpu_to_le16(EDMA_TCD_DOFF_DOFF(doff));
+
+	tcd->dlast_sga = cpu_to_le32(EDMA_TCD_DLAST_SGA_DLAST_SGA(dlast_sga));
+
+	tcd->biter = cpu_to_le16(EDMA_TCD_BITER_BITER(biter));
+	if (major_int)
+		csr |= EDMA_TCD_CSR_INT_MAJOR;
+
+	if (disable_req)
+		csr |= EDMA_TCD_CSR_D_REQ;
+
+	if (enable_sg)
+		csr |= EDMA_TCD_CSR_E_SG;
+
+	tcd->csr = cpu_to_le16(csr);
+}
+
+static struct fsl_edma_desc *fsl_edma_alloc_desc(struct fsl_edma_chan *fsl_chan,
+		int sg_len)
+{
+	struct fsl_edma_desc *fsl_desc;
+	int i;
+
+	fsl_desc = kzalloc(sizeof(*fsl_desc) +
+			   sizeof(struct fsl_edma_sw_tcd) *
+			   sg_len, GFP_NOWAIT);
+	if (!fsl_desc)
+		return NULL;
+
+	fsl_desc->echan = fsl_chan;
+	fsl_desc->n_tcds = sg_len;
+	for (i = 0; i < sg_len; i++) {
+		fsl_desc->tcd[i].vtcd = dma_pool_alloc(fsl_chan->tcd_pool,
+					GFP_NOWAIT, &fsl_desc->tcd[i].ptcd);
+		if (!fsl_desc->tcd[i].vtcd)
+			goto err;
+	}
+	return fsl_desc;
+
+err:
+	while (--i >= 0)
+		dma_pool_free(fsl_chan->tcd_pool, fsl_desc->tcd[i].vtcd,
+				fsl_desc->tcd[i].ptcd);
+	kfree(fsl_desc);
+	return NULL;
+}
+
+struct dma_async_tx_descriptor *fsl_edma_prep_dma_cyclic(
+		struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len,
+		size_t period_len, enum dma_transfer_direction direction,
+		unsigned long flags)
+{
+	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
+	struct fsl_edma_desc *fsl_desc;
+	dma_addr_t dma_buf_next;
+	int sg_len, i;
+	u32 src_addr, dst_addr, last_sg, nbytes;
+	u16 soff, doff, iter;
+
+	if (!is_slave_direction(fsl_chan->fsc.dir))
+		return NULL;
+
+	sg_len = buf_len / period_len;
+	fsl_desc = fsl_edma_alloc_desc(fsl_chan, sg_len);
+	if (!fsl_desc)
+		return NULL;
+	fsl_desc->iscyclic = true;
+
+	dma_buf_next = dma_addr;
+	nbytes = fsl_chan->fsc.addr_width * fsl_chan->fsc.burst;
+	iter = period_len / nbytes;
+
+	for (i = 0; i < sg_len; i++) {
+		if (dma_buf_next >= dma_addr + buf_len)
+			dma_buf_next = dma_addr;
+
+		/* get next sg's physical address */
+		last_sg = fsl_desc->tcd[(i + 1) % sg_len].ptcd;
+
+		if (fsl_chan->fsc.dir == DMA_MEM_TO_DEV) {
+			src_addr = dma_buf_next;
+			dst_addr = fsl_chan->fsc.dev_addr;
+			soff = fsl_chan->fsc.addr_width;
+			doff = 0;
+		} else {
+			src_addr = fsl_chan->fsc.dev_addr;
+			dst_addr = dma_buf_next;
+			soff = 0;
+			doff = fsl_chan->fsc.addr_width;
+		}
+
+		fsl_edma_fill_tcd(fsl_desc->tcd[i].vtcd, src_addr, dst_addr,
+				  fsl_chan->fsc.attr, soff, nbytes, 0, iter,
+				  iter, doff, last_sg, true, false, true);
+		dma_buf_next += period_len;
+	}
+
+	return vchan_tx_prep(&fsl_chan->vchan, &fsl_desc->vdesc, flags);
+}
+EXPORT_SYMBOL_GPL(fsl_edma_prep_dma_cyclic);
+
+struct dma_async_tx_descriptor *fsl_edma_prep_slave_sg(
+		struct dma_chan *chan, struct scatterlist *sgl,
+		unsigned int sg_len, enum dma_transfer_direction direction,
+		unsigned long flags, void *context)
+{
+	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
+	struct fsl_edma_desc *fsl_desc;
+	struct scatterlist *sg;
+	u32 src_addr, dst_addr, last_sg, nbytes;
+	u16 soff, doff, iter;
+	int i;
+
+	if (!is_slave_direction(fsl_chan->fsc.dir))
+		return NULL;
+
+	fsl_desc = fsl_edma_alloc_desc(fsl_chan, sg_len);
+	if (!fsl_desc)
+		return NULL;
+	fsl_desc->iscyclic = false;
+
+	nbytes = fsl_chan->fsc.addr_width * fsl_chan->fsc.burst;
+	for_each_sg(sgl, sg, sg_len, i) {
+		/* get next sg's physical address */
+		last_sg = fsl_desc->tcd[(i + 1) % sg_len].ptcd;
+
+		if (fsl_chan->fsc.dir == DMA_MEM_TO_DEV) {
+			src_addr = sg_dma_address(sg);
+			dst_addr = fsl_chan->fsc.dev_addr;
+			soff = fsl_chan->fsc.addr_width;
+			doff = 0;
+		} else {
+			src_addr = fsl_chan->fsc.dev_addr;
+			dst_addr = sg_dma_address(sg);
+			soff = 0;
+			doff = fsl_chan->fsc.addr_width;
+		}
+
+		iter = sg_dma_len(sg) / nbytes;
+		if (i < sg_len - 1) {
+			last_sg = fsl_desc->tcd[(i + 1)].ptcd;
+			fsl_edma_fill_tcd(fsl_desc->tcd[i].vtcd, src_addr,
+					  dst_addr, fsl_chan->fsc.attr, soff,
+					  nbytes, 0, iter, iter, doff, last_sg,
+					  false, false, true);
+		} else {
+			last_sg = 0;
+			fsl_edma_fill_tcd(fsl_desc->tcd[i].vtcd, src_addr,
+					  dst_addr, fsl_chan->fsc.attr, soff,
+					  nbytes, 0, iter, iter, doff, last_sg,
+					  true, true, false);
+		}
+	}
+
+	return vchan_tx_prep(&fsl_chan->vchan, &fsl_desc->vdesc, flags);
+}
+EXPORT_SYMBOL_GPL(fsl_edma_prep_slave_sg);
+
+void fsl_edma_xfer_desc(struct fsl_edma_chan *fsl_chan)
+{
+	struct virt_dma_desc *vdesc;
+
+	vdesc = vchan_next_desc(&fsl_chan->vchan);
+	if (!vdesc)
+		return;
+	fsl_chan->edesc = to_fsl_edma_desc(vdesc);
+	fsl_edma_set_tcd_regs(fsl_chan, fsl_chan->edesc->tcd[0].vtcd);
+	fsl_edma_enable_request(fsl_chan);
+	fsl_chan->status = DMA_IN_PROGRESS;
+	fsl_chan->idle = false;
+}
+EXPORT_SYMBOL_GPL(fsl_edma_xfer_desc);
+
+void fsl_edma_issue_pending(struct dma_chan *chan)
+{
+	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
+	unsigned long flags;
+
+	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
+
+	if (unlikely(fsl_chan->pm_state != RUNNING)) {
+		spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
+		/* cannot submit due to suspend */
+		return;
+	}
+
+	if (vchan_issue_pending(&fsl_chan->vchan) && !fsl_chan->edesc)
+		fsl_edma_xfer_desc(fsl_chan);
+
+	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
+}
+EXPORT_SYMBOL_GPL(fsl_edma_issue_pending);
+
+int fsl_edma_alloc_chan_resources(struct dma_chan *chan)
+{
+	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
+
+	fsl_chan->tcd_pool = dma_pool_create("tcd_pool", chan->device->dev,
+				sizeof(struct fsl_edma_hw_tcd),
+				32, 0);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fsl_edma_alloc_chan_resources);
+
+void fsl_edma_free_chan_resources(struct dma_chan *chan)
+{
+	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
+	unsigned long flags;
+	LIST_HEAD(head);
+
+	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
+	fsl_edma_disable_request(fsl_chan);
+	fsl_edma_chan_mux(fsl_chan, 0, false);
+	fsl_chan->edesc = NULL;
+	vchan_get_all_descriptors(&fsl_chan->vchan, &head);
+	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
+
+	vchan_dma_desc_free_list(&fsl_chan->vchan, &head);
+	dma_pool_destroy(fsl_chan->tcd_pool);
+	fsl_chan->tcd_pool = NULL;
+}
+EXPORT_SYMBOL_GPL(fsl_edma_free_chan_resources);
+
+void fsl_edma_cleanup_vchan(struct dma_device *dmadev)
+{
+	struct fsl_edma_chan *chan, *_chan;
+
+	list_for_each_entry_safe(chan, _chan,
+				&dmadev->channels, vchan.chan.device_node) {
+		list_del(&chan->vchan.chan.device_node);
+		tasklet_kill(&chan->vchan.task);
+	}
+}
+EXPORT_SYMBOL_GPL(fsl_edma_cleanup_vchan);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/dma/fsl-edma-common.h b/drivers/dma/fsl-edma-common.h
new file mode 100644
index 000000000000..f3ea68e15b23
--- /dev/null
+++ b/drivers/dma/fsl-edma-common.h
@@ -0,0 +1,196 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+#ifndef _FSL_EDMA_COMMON_H_
+#define _FSL_EDMA_COMMON_H_
+
+#include "virt-dma.h"
+
+#define EDMA_CR			0x00
+#define EDMA_ES			0x04
+#define EDMA_ERQ		0x0C
+#define EDMA_EEI		0x14
+#define EDMA_SERQ		0x1B
+#define EDMA_CERQ		0x1A
+#define EDMA_SEEI		0x19
+#define EDMA_CEEI		0x18
+#define EDMA_CINT		0x1F
+#define EDMA_CERR		0x1E
+#define EDMA_SSRT		0x1D
+#define EDMA_CDNE		0x1C
+#define EDMA_INTR		0x24
+#define EDMA_ERR		0x2C
+
+#define EDMA_TCD_SADDR(x)	(0x1000 + 32 * (x))
+#define EDMA_TCD_SOFF(x)	(0x1004 + 32 * (x))
+#define EDMA_TCD_ATTR(x)	(0x1006 + 32 * (x))
+#define EDMA_TCD_NBYTES(x)	(0x1008 + 32 * (x))
+#define EDMA_TCD_SLAST(x)	(0x100C + 32 * (x))
+#define EDMA_TCD_DADDR(x)	(0x1010 + 32 * (x))
+#define EDMA_TCD_DOFF(x)	(0x1014 + 32 * (x))
+#define EDMA_TCD_CITER_ELINK(x)	(0x1016 + 32 * (x))
+#define EDMA_TCD_CITER(x)	(0x1016 + 32 * (x))
+#define EDMA_TCD_DLAST_SGA(x)	(0x1018 + 32 * (x))
+#define EDMA_TCD_CSR(x)		(0x101C + 32 * (x))
+#define EDMA_TCD_BITER_ELINK(x)	(0x101E + 32 * (x))
+#define EDMA_TCD_BITER(x)	(0x101E + 32 * (x))
+
+#define EDMA_CR_EDBG		BIT(1)
+#define EDMA_CR_ERCA		BIT(2)
+#define EDMA_CR_ERGA		BIT(3)
+#define EDMA_CR_HOE		BIT(4)
+#define EDMA_CR_HALT		BIT(5)
+#define EDMA_CR_CLM		BIT(6)
+#define EDMA_CR_EMLM		BIT(7)
+#define EDMA_CR_ECX		BIT(16)
+#define EDMA_CR_CX		BIT(17)
+
+#define EDMA_SEEI_SEEI(x)	((x) & 0x1F)
+#define EDMA_CEEI_CEEI(x)	((x) & 0x1F)
+#define EDMA_CINT_CINT(x)	((x) & 0x1F)
+#define EDMA_CERR_CERR(x)	((x) & 0x1F)
+
+#define EDMA_TCD_ATTR_DSIZE(x)		(((x) & 0x0007))
+#define EDMA_TCD_ATTR_DMOD(x)		(((x) & 0x001F) << 3)
+#define EDMA_TCD_ATTR_SSIZE(x)		(((x) & 0x0007) << 8)
+#define EDMA_TCD_ATTR_SMOD(x)		(((x) & 0x001F) << 11)
+#define EDMA_TCD_ATTR_SSIZE_8BIT	(0x0000)
+#define EDMA_TCD_ATTR_SSIZE_16BIT	(0x0100)
+#define EDMA_TCD_ATTR_SSIZE_32BIT	(0x0200)
+#define EDMA_TCD_ATTR_SSIZE_64BIT	(0x0300)
+#define EDMA_TCD_ATTR_SSIZE_32BYTE	(0x0500)
+#define EDMA_TCD_ATTR_DSIZE_8BIT	(0x0000)
+#define EDMA_TCD_ATTR_DSIZE_16BIT	(0x0001)
+#define EDMA_TCD_ATTR_DSIZE_32BIT	(0x0002)
+#define EDMA_TCD_ATTR_DSIZE_64BIT	(0x0003)
+#define EDMA_TCD_ATTR_DSIZE_32BYTE	(0x0005)
+
+#define EDMA_TCD_SOFF_SOFF(x)		(x)
+#define EDMA_TCD_NBYTES_NBYTES(x)	(x)
+#define EDMA_TCD_SLAST_SLAST(x)		(x)
+#define EDMA_TCD_DADDR_DADDR(x)		(x)
+#define EDMA_TCD_CITER_CITER(x)		((x) & 0x7FFF)
+#define EDMA_TCD_DOFF_DOFF(x)		(x)
+#define EDMA_TCD_DLAST_SGA_DLAST_SGA(x)	(x)
+#define EDMA_TCD_BITER_BITER(x)		((x) & 0x7FFF)
+
+#define EDMA_TCD_CSR_START		BIT(0)
+#define EDMA_TCD_CSR_INT_MAJOR		BIT(1)
+#define EDMA_TCD_CSR_INT_HALF		BIT(2)
+#define EDMA_TCD_CSR_D_REQ		BIT(3)
+#define EDMA_TCD_CSR_E_SG		BIT(4)
+#define EDMA_TCD_CSR_E_LINK		BIT(5)
+#define EDMA_TCD_CSR_ACTIVE		BIT(6)
+#define EDMA_TCD_CSR_DONE		BIT(7)
+
+#define EDMAMUX_CHCFG_DIS		0x0
+#define EDMAMUX_CHCFG_ENBL		0x80
+#define EDMAMUX_CHCFG_SOURCE(n)		((n) & 0x3F)
+
+#define DMAMUX_NR	2
+
+#define FSL_EDMA_BUSWIDTHS	(BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
+				 BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
+				 BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
+				 BIT(DMA_SLAVE_BUSWIDTH_8_BYTES))
+enum fsl_edma_pm_state {
+	RUNNING = 0,
+	SUSPENDED,
+};
+
+struct fsl_edma_hw_tcd {
+	__le32	saddr;
+	__le16	soff;
+	__le16	attr;
+	__le32	nbytes;
+	__le32	slast;
+	__le32	daddr;
+	__le16	doff;
+	__le16	citer;
+	__le32	dlast_sga;
+	__le16	csr;
+	__le16	biter;
+};
+
+struct fsl_edma_sw_tcd {
+	dma_addr_t			ptcd;
+	struct fsl_edma_hw_tcd		*vtcd;
+};
+
+struct fsl_edma_slave_config {
+	enum dma_transfer_direction	dir;
+	enum dma_slave_buswidth		addr_width;
+	u32				dev_addr;
+	u32				burst;
+	u32				attr;
+};
+
+struct fsl_edma_chan {
+	struct virt_dma_chan		vchan;
+	enum dma_status			status;
+	enum fsl_edma_pm_state		pm_state;
+	bool				idle;
+	u32				slave_id;
+	struct fsl_edma_engine		*edma;
+	struct fsl_edma_desc		*edesc;
+	struct fsl_edma_slave_config	fsc;
+	struct dma_pool			*tcd_pool;
+};
+
+struct fsl_edma_desc {
+	struct virt_dma_desc		vdesc;
+	struct fsl_edma_chan		*echan;
+	bool				iscyclic;
+	unsigned int			n_tcds;
+	struct fsl_edma_sw_tcd		tcd[];
+};
+
+struct fsl_edma_engine {
+	struct dma_device	dma_dev;
+	void __iomem		*membase;
+	void __iomem		*muxbase[DMAMUX_NR];
+	struct clk		*muxclk[DMAMUX_NR];
+	struct mutex		fsl_edma_mutex;
+	u32			n_chans;
+	int			txirq;
+	int			errirq;
+	bool			big_endian;
+	struct fsl_edma_chan	chans[];
+};
+
+u32 edma_readl(struct fsl_edma_engine *edma, void __iomem *addr);
+void edma_writeb(struct fsl_edma_engine *edma, u8 val, void __iomem *addr);
+void edma_writew(struct fsl_edma_engine *edma, u16 val, void __iomem *addr);
+void edma_writel(struct fsl_edma_engine *edma, u32 val, void __iomem *addr);
+
+struct fsl_edma_chan *to_fsl_edma_chan(struct dma_chan *chan);
+struct fsl_edma_desc *to_fsl_edma_desc(struct virt_dma_desc *vd);
+
+void fsl_edma_disable_request(struct fsl_edma_chan *fsl_chan);
+void fsl_edma_chan_mux(struct fsl_edma_chan *fsl_chan,
+			unsigned int slot, bool enable);
+void fsl_edma_free_desc(struct virt_dma_desc *vdesc);
+int fsl_edma_terminate_all(struct dma_chan *chan);
+int fsl_edma_pause(struct dma_chan *chan);
+int fsl_edma_resume(struct dma_chan *chan);
+int fsl_edma_slave_config(struct dma_chan *chan,
+				 struct dma_slave_config *cfg);
+enum dma_status fsl_edma_tx_status(struct dma_chan *chan,
+		dma_cookie_t cookie, struct dma_tx_state *txstate);
+struct dma_async_tx_descriptor *fsl_edma_prep_dma_cyclic(
+		struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len,
+		size_t period_len, enum dma_transfer_direction direction,
+		unsigned long flags);
+struct dma_async_tx_descriptor *fsl_edma_prep_slave_sg(
+		struct dma_chan *chan, struct scatterlist *sgl,
+		unsigned int sg_len, enum dma_transfer_direction direction,
+		unsigned long flags, void *context);
+void fsl_edma_xfer_desc(struct fsl_edma_chan *fsl_chan);
+void fsl_edma_issue_pending(struct dma_chan *chan);
+int fsl_edma_alloc_chan_resources(struct dma_chan *chan);
+void fsl_edma_free_chan_resources(struct dma_chan *chan);
+void fsl_edma_cleanup_vchan(struct dma_device *dmadev);
+
+#endif /* _FSL_EDMA_COMMON_H_ */
diff --git a/drivers/dma/fsl-edma.c b/drivers/dma/fsl-edma.c
index c7568869284e..337ad0c0ea78 100644
--- a/drivers/dma/fsl-edma.c
+++ b/drivers/dma/fsl-edma.c
@@ -13,653 +13,16 @@ 
  * option) any later version.
  */
 
-#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmapool.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_dma.h>
 
-#include "virt-dma.h"
-
-#define EDMA_CR			0x00
-#define EDMA_ES			0x04
-#define EDMA_ERQ		0x0C
-#define EDMA_EEI		0x14
-#define EDMA_SERQ		0x1B
-#define EDMA_CERQ		0x1A
-#define EDMA_SEEI		0x19
-#define EDMA_CEEI		0x18
-#define EDMA_CINT		0x1F
-#define EDMA_CERR		0x1E
-#define EDMA_SSRT		0x1D
-#define EDMA_CDNE		0x1C
-#define EDMA_INTR		0x24
-#define EDMA_ERR		0x2C
-
-#define EDMA_TCD_SADDR(x)	(0x1000 + 32 * (x))
-#define EDMA_TCD_SOFF(x)	(0x1004 + 32 * (x))
-#define EDMA_TCD_ATTR(x)	(0x1006 + 32 * (x))
-#define EDMA_TCD_NBYTES(x)	(0x1008 + 32 * (x))
-#define EDMA_TCD_SLAST(x)	(0x100C + 32 * (x))
-#define EDMA_TCD_DADDR(x)	(0x1010 + 32 * (x))
-#define EDMA_TCD_DOFF(x)	(0x1014 + 32 * (x))
-#define EDMA_TCD_CITER_ELINK(x)	(0x1016 + 32 * (x))
-#define EDMA_TCD_CITER(x)	(0x1016 + 32 * (x))
-#define EDMA_TCD_DLAST_SGA(x)	(0x1018 + 32 * (x))
-#define EDMA_TCD_CSR(x)		(0x101C + 32 * (x))
-#define EDMA_TCD_BITER_ELINK(x)	(0x101E + 32 * (x))
-#define EDMA_TCD_BITER(x)	(0x101E + 32 * (x))
-
-#define EDMA_CR_EDBG		BIT(1)
-#define EDMA_CR_ERCA		BIT(2)
-#define EDMA_CR_ERGA		BIT(3)
-#define EDMA_CR_HOE		BIT(4)
-#define EDMA_CR_HALT		BIT(5)
-#define EDMA_CR_CLM		BIT(6)
-#define EDMA_CR_EMLM		BIT(7)
-#define EDMA_CR_ECX		BIT(16)
-#define EDMA_CR_CX		BIT(17)
-
-#define EDMA_SEEI_SEEI(x)	((x) & 0x1F)
-#define EDMA_CEEI_CEEI(x)	((x) & 0x1F)
-#define EDMA_CINT_CINT(x)	((x) & 0x1F)
-#define EDMA_CERR_CERR(x)	((x) & 0x1F)
-
-#define EDMA_TCD_ATTR_DSIZE(x)		(((x) & 0x0007))
-#define EDMA_TCD_ATTR_DMOD(x)		(((x) & 0x001F) << 3)
-#define EDMA_TCD_ATTR_SSIZE(x)		(((x) & 0x0007) << 8)
-#define EDMA_TCD_ATTR_SMOD(x)		(((x) & 0x001F) << 11)
-#define EDMA_TCD_ATTR_SSIZE_8BIT	(0x0000)
-#define EDMA_TCD_ATTR_SSIZE_16BIT	(0x0100)
-#define EDMA_TCD_ATTR_SSIZE_32BIT	(0x0200)
-#define EDMA_TCD_ATTR_SSIZE_64BIT	(0x0300)
-#define EDMA_TCD_ATTR_SSIZE_32BYTE	(0x0500)
-#define EDMA_TCD_ATTR_DSIZE_8BIT	(0x0000)
-#define EDMA_TCD_ATTR_DSIZE_16BIT	(0x0001)
-#define EDMA_TCD_ATTR_DSIZE_32BIT	(0x0002)
-#define EDMA_TCD_ATTR_DSIZE_64BIT	(0x0003)
-#define EDMA_TCD_ATTR_DSIZE_32BYTE	(0x0005)
-
-#define EDMA_TCD_SOFF_SOFF(x)		(x)
-#define EDMA_TCD_NBYTES_NBYTES(x)	(x)
-#define EDMA_TCD_SLAST_SLAST(x)		(x)
-#define EDMA_TCD_DADDR_DADDR(x)		(x)
-#define EDMA_TCD_CITER_CITER(x)		((x) & 0x7FFF)
-#define EDMA_TCD_DOFF_DOFF(x)		(x)
-#define EDMA_TCD_DLAST_SGA_DLAST_SGA(x)	(x)
-#define EDMA_TCD_BITER_BITER(x)		((x) & 0x7FFF)
-
-#define EDMA_TCD_CSR_START		BIT(0)
-#define EDMA_TCD_CSR_INT_MAJOR		BIT(1)
-#define EDMA_TCD_CSR_INT_HALF		BIT(2)
-#define EDMA_TCD_CSR_D_REQ		BIT(3)
-#define EDMA_TCD_CSR_E_SG		BIT(4)
-#define EDMA_TCD_CSR_E_LINK		BIT(5)
-#define EDMA_TCD_CSR_ACTIVE		BIT(6)
-#define EDMA_TCD_CSR_DONE		BIT(7)
-
-#define EDMAMUX_CHCFG_DIS		0x0
-#define EDMAMUX_CHCFG_ENBL		0x80
-#define EDMAMUX_CHCFG_SOURCE(n)		((n) & 0x3F)
-
-#define DMAMUX_NR	2
-
-#define FSL_EDMA_BUSWIDTHS	BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
-				BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
-				BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
-				BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)
-enum fsl_edma_pm_state {
-	RUNNING = 0,
-	SUSPENDED,
-};
-
-struct fsl_edma_hw_tcd {
-	__le32	saddr;
-	__le16	soff;
-	__le16	attr;
-	__le32	nbytes;
-	__le32	slast;
-	__le32	daddr;
-	__le16	doff;
-	__le16	citer;
-	__le32	dlast_sga;
-	__le16	csr;
-	__le16	biter;
-};
-
-struct fsl_edma_sw_tcd {
-	dma_addr_t			ptcd;
-	struct fsl_edma_hw_tcd		*vtcd;
-};
-
-struct fsl_edma_slave_config {
-	enum dma_transfer_direction	dir;
-	enum dma_slave_buswidth		addr_width;
-	u32				dev_addr;
-	u32				burst;
-	u32				attr;
-};
-
-struct fsl_edma_chan {
-	struct virt_dma_chan		vchan;
-	enum dma_status			status;
-	enum fsl_edma_pm_state		pm_state;
-	bool				idle;
-	u32				slave_id;
-	struct fsl_edma_engine		*edma;
-	struct fsl_edma_desc		*edesc;
-	struct fsl_edma_slave_config	fsc;
-	struct dma_pool			*tcd_pool;
-};
-
-struct fsl_edma_desc {
-	struct virt_dma_desc		vdesc;
-	struct fsl_edma_chan		*echan;
-	bool				iscyclic;
-	unsigned int			n_tcds;
-	struct fsl_edma_sw_tcd		tcd[];
-};
-
-struct fsl_edma_engine {
-	struct dma_device	dma_dev;
-	void __iomem		*membase;
-	void __iomem		*muxbase[DMAMUX_NR];
-	struct clk		*muxclk[DMAMUX_NR];
-	struct mutex		fsl_edma_mutex;
-	u32			n_chans;
-	int			txirq;
-	int			errirq;
-	bool			big_endian;
-	struct fsl_edma_chan	chans[];
-};
-
-/*
- * R/W functions for big- or little-endian registers:
- * The eDMA controller's endian is independent of the CPU core's endian.
- * For the big-endian IP module, the offset for 8-bit or 16-bit registers
- * should also be swapped opposite to that in little-endian IP.
- */
-
-static u32 edma_readl(struct fsl_edma_engine *edma, void __iomem *addr)
-{
-	if (edma->big_endian)
-		return ioread32be(addr);
-	else
-		return ioread32(addr);
-}
-
-static void edma_writeb(struct fsl_edma_engine *edma, u8 val, void __iomem *addr)
-{
-	/* swap the reg offset for these in big-endian mode */
-	if (edma->big_endian)
-		iowrite8(val, (void __iomem *)((unsigned long)addr ^ 0x3));
-	else
-		iowrite8(val, addr);
-}
-
-static void edma_writew(struct fsl_edma_engine *edma, u16 val, void __iomem *addr)
-{
-	/* swap the reg offset for these in big-endian mode */
-	if (edma->big_endian)
-		iowrite16be(val, (void __iomem *)((unsigned long)addr ^ 0x2));
-	else
-		iowrite16(val, addr);
-}
-
-static void edma_writel(struct fsl_edma_engine *edma, u32 val, void __iomem *addr)
-{
-	if (edma->big_endian)
-		iowrite32be(val, addr);
-	else
-		iowrite32(val, addr);
-}
-
-static struct fsl_edma_chan *to_fsl_edma_chan(struct dma_chan *chan)
-{
-	return container_of(chan, struct fsl_edma_chan, vchan.chan);
-}
-
-static struct fsl_edma_desc *to_fsl_edma_desc(struct virt_dma_desc *vd)
-{
-	return container_of(vd, struct fsl_edma_desc, vdesc);
-}
-
-static void fsl_edma_enable_request(struct fsl_edma_chan *fsl_chan)
-{
-	void __iomem *addr = fsl_chan->edma->membase;
-	u32 ch = fsl_chan->vchan.chan.chan_id;
-
-	edma_writeb(fsl_chan->edma, EDMA_SEEI_SEEI(ch), addr + EDMA_SEEI);
-	edma_writeb(fsl_chan->edma, ch, addr + EDMA_SERQ);
-}
-
-static void fsl_edma_disable_request(struct fsl_edma_chan *fsl_chan)
-{
-	void __iomem *addr = fsl_chan->edma->membase;
-	u32 ch = fsl_chan->vchan.chan.chan_id;
-
-	edma_writeb(fsl_chan->edma, ch, addr + EDMA_CERQ);
-	edma_writeb(fsl_chan->edma, EDMA_CEEI_CEEI(ch), addr + EDMA_CEEI);
-}
-
-static void fsl_edma_chan_mux(struct fsl_edma_chan *fsl_chan,
-			unsigned int slot, bool enable)
-{
-	u32 ch = fsl_chan->vchan.chan.chan_id;
-	void __iomem *muxaddr;
-	unsigned chans_per_mux, ch_off;
-
-	chans_per_mux = fsl_chan->edma->n_chans / DMAMUX_NR;
-	ch_off = fsl_chan->vchan.chan.chan_id % chans_per_mux;
-	muxaddr = fsl_chan->edma->muxbase[ch / chans_per_mux];
-	slot = EDMAMUX_CHCFG_SOURCE(slot);
-
-	if (enable)
-		iowrite8(EDMAMUX_CHCFG_ENBL | slot, muxaddr + ch_off);
-	else
-		iowrite8(EDMAMUX_CHCFG_DIS, muxaddr + ch_off);
-}
-
-static unsigned int fsl_edma_get_tcd_attr(enum dma_slave_buswidth addr_width)
-{
-	switch (addr_width) {
-	case 1:
-		return EDMA_TCD_ATTR_SSIZE_8BIT | EDMA_TCD_ATTR_DSIZE_8BIT;
-	case 2:
-		return EDMA_TCD_ATTR_SSIZE_16BIT | EDMA_TCD_ATTR_DSIZE_16BIT;
-	case 4:
-		return EDMA_TCD_ATTR_SSIZE_32BIT | EDMA_TCD_ATTR_DSIZE_32BIT;
-	case 8:
-		return EDMA_TCD_ATTR_SSIZE_64BIT | EDMA_TCD_ATTR_DSIZE_64BIT;
-	default:
-		return EDMA_TCD_ATTR_SSIZE_32BIT | EDMA_TCD_ATTR_DSIZE_32BIT;
-	}
-}
-
-static void fsl_edma_free_desc(struct virt_dma_desc *vdesc)
-{
-	struct fsl_edma_desc *fsl_desc;
-	int i;
-
-	fsl_desc = to_fsl_edma_desc(vdesc);
-	for (i = 0; i < fsl_desc->n_tcds; i++)
-		dma_pool_free(fsl_desc->echan->tcd_pool, fsl_desc->tcd[i].vtcd,
-			      fsl_desc->tcd[i].ptcd);
-	kfree(fsl_desc);
-}
-
-static int fsl_edma_terminate_all(struct dma_chan *chan)
-{
-	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
-	unsigned long flags;
-	LIST_HEAD(head);
-
-	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
-	fsl_edma_disable_request(fsl_chan);
-	fsl_chan->edesc = NULL;
-	fsl_chan->idle = true;
-	vchan_get_all_descriptors(&fsl_chan->vchan, &head);
-	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
-	vchan_dma_desc_free_list(&fsl_chan->vchan, &head);
-	return 0;
-}
-
-static int fsl_edma_pause(struct dma_chan *chan)
-{
-	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
-	unsigned long flags;
-
-	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
-	if (fsl_chan->edesc) {
-		fsl_edma_disable_request(fsl_chan);
-		fsl_chan->status = DMA_PAUSED;
-		fsl_chan->idle = true;
-	}
-	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
-	return 0;
-}
-
-static int fsl_edma_resume(struct dma_chan *chan)
-{
-	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
-	unsigned long flags;
-
-	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
-	if (fsl_chan->edesc) {
-		fsl_edma_enable_request(fsl_chan);
-		fsl_chan->status = DMA_IN_PROGRESS;
-		fsl_chan->idle = false;
-	}
-	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
-	return 0;
-}
-
-static int fsl_edma_slave_config(struct dma_chan *chan,
-				 struct dma_slave_config *cfg)
-{
-	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
-
-	fsl_chan->fsc.dir = cfg->direction;
-	if (cfg->direction == DMA_DEV_TO_MEM) {
-		fsl_chan->fsc.dev_addr = cfg->src_addr;
-		fsl_chan->fsc.addr_width = cfg->src_addr_width;
-		fsl_chan->fsc.burst = cfg->src_maxburst;
-		fsl_chan->fsc.attr = fsl_edma_get_tcd_attr(cfg->src_addr_width);
-	} else if (cfg->direction == DMA_MEM_TO_DEV) {
-		fsl_chan->fsc.dev_addr = cfg->dst_addr;
-		fsl_chan->fsc.addr_width = cfg->dst_addr_width;
-		fsl_chan->fsc.burst = cfg->dst_maxburst;
-		fsl_chan->fsc.attr = fsl_edma_get_tcd_attr(cfg->dst_addr_width);
-	} else {
-			return -EINVAL;
-	}
-	return 0;
-}
-
-static size_t fsl_edma_desc_residue(struct fsl_edma_chan *fsl_chan,
-		struct virt_dma_desc *vdesc, bool in_progress)
-{
-	struct fsl_edma_desc *edesc = fsl_chan->edesc;
-	void __iomem *addr = fsl_chan->edma->membase;
-	u32 ch = fsl_chan->vchan.chan.chan_id;
-	enum dma_transfer_direction dir = fsl_chan->fsc.dir;
-	dma_addr_t cur_addr, dma_addr;
-	size_t len, size;
-	int i;
-
-	/* calculate the total size in this desc */
-	for (len = i = 0; i < fsl_chan->edesc->n_tcds; i++)
-		len += le32_to_cpu(edesc->tcd[i].vtcd->nbytes)
-			* le16_to_cpu(edesc->tcd[i].vtcd->biter);
-
-	if (!in_progress)
-		return len;
-
-	if (dir == DMA_MEM_TO_DEV)
-		cur_addr = edma_readl(fsl_chan->edma, addr + EDMA_TCD_SADDR(ch));
-	else
-		cur_addr = edma_readl(fsl_chan->edma, addr + EDMA_TCD_DADDR(ch));
-
-	/* figure out the finished and calculate the residue */
-	for (i = 0; i < fsl_chan->edesc->n_tcds; i++) {
-		size = le32_to_cpu(edesc->tcd[i].vtcd->nbytes)
-			* le16_to_cpu(edesc->tcd[i].vtcd->biter);
-		if (dir == DMA_MEM_TO_DEV)
-			dma_addr = le32_to_cpu(edesc->tcd[i].vtcd->saddr);
-		else
-			dma_addr = le32_to_cpu(edesc->tcd[i].vtcd->daddr);
-
-		len -= size;
-		if (cur_addr >= dma_addr && cur_addr < dma_addr + size) {
-			len += dma_addr + size - cur_addr;
-			break;
-		}
-	}
-
-	return len;
-}
-
-static enum dma_status fsl_edma_tx_status(struct dma_chan *chan,
-		dma_cookie_t cookie, struct dma_tx_state *txstate)
-{
-	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
-	struct virt_dma_desc *vdesc;
-	enum dma_status status;
-	unsigned long flags;
-
-	status = dma_cookie_status(chan, cookie, txstate);
-	if (status == DMA_COMPLETE)
-		return status;
-
-	if (!txstate)
-		return fsl_chan->status;
-
-	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
-	vdesc = vchan_find_desc(&fsl_chan->vchan, cookie);
-	if (fsl_chan->edesc && cookie == fsl_chan->edesc->vdesc.tx.cookie)
-		txstate->residue = fsl_edma_desc_residue(fsl_chan, vdesc, true);
-	else if (vdesc)
-		txstate->residue = fsl_edma_desc_residue(fsl_chan, vdesc, false);
-	else
-		txstate->residue = 0;
-
-	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
-
-	return fsl_chan->status;
-}
-
-static void fsl_edma_set_tcd_regs(struct fsl_edma_chan *fsl_chan,
-				  struct fsl_edma_hw_tcd *tcd)
-{
-	struct fsl_edma_engine *edma = fsl_chan->edma;
-	void __iomem *addr = fsl_chan->edma->membase;
-	u32 ch = fsl_chan->vchan.chan.chan_id;
-
-	/*
-	 * TCD parameters are stored in struct fsl_edma_hw_tcd in little
-	 * endian format. However, we need to load the TCD registers in
-	 * big- or little-endian obeying the eDMA engine model endian.
-	 */
-	edma_writew(edma, 0, addr + EDMA_TCD_CSR(ch));
-	edma_writel(edma, le32_to_cpu(tcd->saddr), addr + EDMA_TCD_SADDR(ch));
-	edma_writel(edma, le32_to_cpu(tcd->daddr), addr + EDMA_TCD_DADDR(ch));
-
-	edma_writew(edma, le16_to_cpu(tcd->attr), addr + EDMA_TCD_ATTR(ch));
-	edma_writew(edma, le16_to_cpu(tcd->soff), addr + EDMA_TCD_SOFF(ch));
-
-	edma_writel(edma, le32_to_cpu(tcd->nbytes), addr + EDMA_TCD_NBYTES(ch));
-	edma_writel(edma, le32_to_cpu(tcd->slast), addr + EDMA_TCD_SLAST(ch));
-
-	edma_writew(edma, le16_to_cpu(tcd->citer), addr + EDMA_TCD_CITER(ch));
-	edma_writew(edma, le16_to_cpu(tcd->biter), addr + EDMA_TCD_BITER(ch));
-	edma_writew(edma, le16_to_cpu(tcd->doff), addr + EDMA_TCD_DOFF(ch));
-
-	edma_writel(edma, le32_to_cpu(tcd->dlast_sga), addr + EDMA_TCD_DLAST_SGA(ch));
-
-	edma_writew(edma, le16_to_cpu(tcd->csr), addr + EDMA_TCD_CSR(ch));
-}
-
-static inline
-void fsl_edma_fill_tcd(struct fsl_edma_hw_tcd *tcd, u32 src, u32 dst,
-		       u16 attr, u16 soff, u32 nbytes, u32 slast, u16 citer,
-		       u16 biter, u16 doff, u32 dlast_sga, bool major_int,
-		       bool disable_req, bool enable_sg)
-{
-	u16 csr = 0;
-
-	/*
-	 * eDMA hardware SGs require the TCDs to be stored in little
-	 * endian format irrespective of the register endian model.
-	 * So we put the value in little endian in memory, waiting
-	 * for fsl_edma_set_tcd_regs doing the swap.
-	 */
-	tcd->saddr = cpu_to_le32(src);
-	tcd->daddr = cpu_to_le32(dst);
-
-	tcd->attr = cpu_to_le16(attr);
-
-	tcd->soff = cpu_to_le16(EDMA_TCD_SOFF_SOFF(soff));
-
-	tcd->nbytes = cpu_to_le32(EDMA_TCD_NBYTES_NBYTES(nbytes));
-	tcd->slast = cpu_to_le32(EDMA_TCD_SLAST_SLAST(slast));
-
-	tcd->citer = cpu_to_le16(EDMA_TCD_CITER_CITER(citer));
-	tcd->doff = cpu_to_le16(EDMA_TCD_DOFF_DOFF(doff));
-
-	tcd->dlast_sga = cpu_to_le32(EDMA_TCD_DLAST_SGA_DLAST_SGA(dlast_sga));
-
-	tcd->biter = cpu_to_le16(EDMA_TCD_BITER_BITER(biter));
-	if (major_int)
-		csr |= EDMA_TCD_CSR_INT_MAJOR;
-
-	if (disable_req)
-		csr |= EDMA_TCD_CSR_D_REQ;
-
-	if (enable_sg)
-		csr |= EDMA_TCD_CSR_E_SG;
-
-	tcd->csr = cpu_to_le16(csr);
-}
-
-static struct fsl_edma_desc *fsl_edma_alloc_desc(struct fsl_edma_chan *fsl_chan,
-		int sg_len)
-{
-	struct fsl_edma_desc *fsl_desc;
-	int i;
-
-	fsl_desc = kzalloc(sizeof(*fsl_desc) + sizeof(struct fsl_edma_sw_tcd) * sg_len,
-				GFP_NOWAIT);
-	if (!fsl_desc)
-		return NULL;
-
-	fsl_desc->echan = fsl_chan;
-	fsl_desc->n_tcds = sg_len;
-	for (i = 0; i < sg_len; i++) {
-		fsl_desc->tcd[i].vtcd = dma_pool_alloc(fsl_chan->tcd_pool,
-					GFP_NOWAIT, &fsl_desc->tcd[i].ptcd);
-		if (!fsl_desc->tcd[i].vtcd)
-			goto err;
-	}
-	return fsl_desc;
-
-err:
-	while (--i >= 0)
-		dma_pool_free(fsl_chan->tcd_pool, fsl_desc->tcd[i].vtcd,
-				fsl_desc->tcd[i].ptcd);
-	kfree(fsl_desc);
-	return NULL;
-}
-
-static struct dma_async_tx_descriptor *fsl_edma_prep_dma_cyclic(
-		struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len,
-		size_t period_len, enum dma_transfer_direction direction,
-		unsigned long flags)
-{
-	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
-	struct fsl_edma_desc *fsl_desc;
-	dma_addr_t dma_buf_next;
-	int sg_len, i;
-	u32 src_addr, dst_addr, last_sg, nbytes;
-	u16 soff, doff, iter;
-
-	if (!is_slave_direction(fsl_chan->fsc.dir))
-		return NULL;
-
-	sg_len = buf_len / period_len;
-	fsl_desc = fsl_edma_alloc_desc(fsl_chan, sg_len);
-	if (!fsl_desc)
-		return NULL;
-	fsl_desc->iscyclic = true;
-
-	dma_buf_next = dma_addr;
-	nbytes = fsl_chan->fsc.addr_width * fsl_chan->fsc.burst;
-	iter = period_len / nbytes;
-
-	for (i = 0; i < sg_len; i++) {
-		if (dma_buf_next >= dma_addr + buf_len)
-			dma_buf_next = dma_addr;
-
-		/* get next sg's physical address */
-		last_sg = fsl_desc->tcd[(i + 1) % sg_len].ptcd;
-
-		if (fsl_chan->fsc.dir == DMA_MEM_TO_DEV) {
-			src_addr = dma_buf_next;
-			dst_addr = fsl_chan->fsc.dev_addr;
-			soff = fsl_chan->fsc.addr_width;
-			doff = 0;
-		} else {
-			src_addr = fsl_chan->fsc.dev_addr;
-			dst_addr = dma_buf_next;
-			soff = 0;
-			doff = fsl_chan->fsc.addr_width;
-		}
-
-		fsl_edma_fill_tcd(fsl_desc->tcd[i].vtcd, src_addr, dst_addr,
-				  fsl_chan->fsc.attr, soff, nbytes, 0, iter,
-				  iter, doff, last_sg, true, false, true);
-		dma_buf_next += period_len;
-	}
-
-	return vchan_tx_prep(&fsl_chan->vchan, &fsl_desc->vdesc, flags);
-}
-
-static struct dma_async_tx_descriptor *fsl_edma_prep_slave_sg(
-		struct dma_chan *chan, struct scatterlist *sgl,
-		unsigned int sg_len, enum dma_transfer_direction direction,
-		unsigned long flags, void *context)
-{
-	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
-	struct fsl_edma_desc *fsl_desc;
-	struct scatterlist *sg;
-	u32 src_addr, dst_addr, last_sg, nbytes;
-	u16 soff, doff, iter;
-	int i;
-
-	if (!is_slave_direction(fsl_chan->fsc.dir))
-		return NULL;
-
-	fsl_desc = fsl_edma_alloc_desc(fsl_chan, sg_len);
-	if (!fsl_desc)
-		return NULL;
-	fsl_desc->iscyclic = false;
-
-	nbytes = fsl_chan->fsc.addr_width * fsl_chan->fsc.burst;
-	for_each_sg(sgl, sg, sg_len, i) {
-		/* get next sg's physical address */
-		last_sg = fsl_desc->tcd[(i + 1) % sg_len].ptcd;
-
-		if (fsl_chan->fsc.dir == DMA_MEM_TO_DEV) {
-			src_addr = sg_dma_address(sg);
-			dst_addr = fsl_chan->fsc.dev_addr;
-			soff = fsl_chan->fsc.addr_width;
-			doff = 0;
-		} else {
-			src_addr = fsl_chan->fsc.dev_addr;
-			dst_addr = sg_dma_address(sg);
-			soff = 0;
-			doff = fsl_chan->fsc.addr_width;
-		}
-
-		iter = sg_dma_len(sg) / nbytes;
-		if (i < sg_len - 1) {
-			last_sg = fsl_desc->tcd[(i + 1)].ptcd;
-			fsl_edma_fill_tcd(fsl_desc->tcd[i].vtcd, src_addr,
-					  dst_addr, fsl_chan->fsc.attr, soff,
-					  nbytes, 0, iter, iter, doff, last_sg,
-					  false, false, true);
-		} else {
-			last_sg = 0;
-			fsl_edma_fill_tcd(fsl_desc->tcd[i].vtcd, src_addr,
-					  dst_addr, fsl_chan->fsc.attr, soff,
-					  nbytes, 0, iter, iter, doff, last_sg,
-					  true, true, false);
-		}
-	}
-
-	return vchan_tx_prep(&fsl_chan->vchan, &fsl_desc->vdesc, flags);
-}
-
-static void fsl_edma_xfer_desc(struct fsl_edma_chan *fsl_chan)
-{
-	struct virt_dma_desc *vdesc;
-
-	vdesc = vchan_next_desc(&fsl_chan->vchan);
-	if (!vdesc)
-		return;
-	fsl_chan->edesc = to_fsl_edma_desc(vdesc);
-	fsl_edma_set_tcd_regs(fsl_chan, fsl_chan->edesc->tcd[0].vtcd);
-	fsl_edma_enable_request(fsl_chan);
-	fsl_chan->status = DMA_IN_PROGRESS;
-	fsl_chan->idle = false;
-}
+#include "fsl-edma-common.h"
 
 static irqreturn_t fsl_edma_tx_handler(int irq, void *dev_id)
 {
@@ -730,25 +93,6 @@  static irqreturn_t fsl_edma_irq_handler(int irq, void *dev_id)
 	return fsl_edma_err_handler(irq, dev_id);
 }
 
-static void fsl_edma_issue_pending(struct dma_chan *chan)
-{
-	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
-	unsigned long flags;
-
-	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
-
-	if (unlikely(fsl_chan->pm_state != RUNNING)) {
-		spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
-		/* cannot submit due to suspend */
-		return;
-	}
-
-	if (vchan_issue_pending(&fsl_chan->vchan) && !fsl_chan->edesc)
-		fsl_edma_xfer_desc(fsl_chan);
-
-	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
-}
-
 static struct dma_chan *fsl_edma_xlate(struct of_phandle_args *dma_spec,
 		struct of_dma *ofdma)
 {
@@ -781,34 +125,6 @@  static struct dma_chan *fsl_edma_xlate(struct of_phandle_args *dma_spec,
 	return NULL;
 }
 
-static int fsl_edma_alloc_chan_resources(struct dma_chan *chan)
-{
-	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
-
-	fsl_chan->tcd_pool = dma_pool_create("tcd_pool", chan->device->dev,
-				sizeof(struct fsl_edma_hw_tcd),
-				32, 0);
-	return 0;
-}
-
-static void fsl_edma_free_chan_resources(struct dma_chan *chan)
-{
-	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
-	unsigned long flags;
-	LIST_HEAD(head);
-
-	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
-	fsl_edma_disable_request(fsl_chan);
-	fsl_edma_chan_mux(fsl_chan, 0, false);
-	fsl_chan->edesc = NULL;
-	vchan_get_all_descriptors(&fsl_chan->vchan, &head);
-	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
-
-	vchan_dma_desc_free_list(&fsl_chan->vchan, &head);
-	dma_pool_destroy(fsl_chan->tcd_pool);
-	fsl_chan->tcd_pool = NULL;
-}
-
 static int
 fsl_edma_irq_init(struct platform_device *pdev, struct fsl_edma_engine *fsl_edma)
 {
@@ -995,17 +311,6 @@  static int fsl_edma_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static void fsl_edma_cleanup_vchan(struct dma_device *dmadev)
-{
-	struct fsl_edma_chan *chan, *_chan;
-
-	list_for_each_entry_safe(chan, _chan,
-				&dmadev->channels, vchan.chan.device_node) {
-		list_del(&chan->vchan.chan.device_node);
-		tasklet_kill(&chan->vchan.task);
-	}
-}
-
 static int fsl_edma_remove(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;