| Message ID | 1531131741-19971-6-git-send-email-kgunda@codeaurora.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Delegated to: | Andy Gross |
| Headers | show |
On 09/07/18 11:22, Kiran Gunda wrote: > Restructure the driver to add the support for new WLED > peripherals. > > Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> > --- > Changes from V3: > - This is the new patch after splitting the > "backlight: qcom-wled: Add support for WLED4 peripheral" patch > to seperate the WLED3 specific restructure. > > drivers/video/backlight/qcom-wled.c | 396 ++++++++++++++++++++++-------------- > 1 file changed, 246 insertions(+), 150 deletions(-) > > diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c > index 3cd6e75..87fc1d0 100644 > --- a/drivers/video/backlight/qcom-wled.c > +++ b/drivers/video/backlight/qcom-wled.c > @@ -15,59 +15,71 @@ > #include <linux/module.h> > #include <linux/of.h> > #include <linux/of_device.h> > +#include <linux/of_address.h> > #include <linux/regmap.h> > > /* From DT binding */ > +#define WLED_MAX_STRINGS 4 > + > #define WLED_DEFAULT_BRIGHTNESS 2048 > > -#define WLED3_SINK_REG_BRIGHT_MAX 0xFFF > -#define WLED3_CTRL_REG_VAL_BASE 0x40 > +#define WLED_SINK_REG_BRIGHT_MAX 0xFFF > > -/* WLED3 control registers */ > -#define WLED3_CTRL_REG_MOD_EN 0x46 > -#define WLED3_CTRL_REG_MOD_EN_BIT BIT(7) > -#define WLED3_CTRL_REG_MOD_EN_MASK BIT(7) > +/* WLED control registers */ > +#define WLED_CTRL_REG_MOD_EN 0x46 > +#define WLED_CTRL_REG_MOD_EN_MASK BIT(7) > +#define WLED_CTRL_REG_MOD_EN_SHIFT 7 > > -#define WLED3_CTRL_REG_FREQ 0x4c > -#define WLED3_CTRL_REG_FREQ_MASK 0x0f > +#define WLED_CTRL_REG_FREQ 0x4c > +#define WLED_CTRL_REG_FREQ_MASK GENMASK(3, 0) > > -#define WLED3_CTRL_REG_OVP 0x4d > -#define WLED3_CTRL_REG_OVP_MASK 0x03 > +#define WLED_CTRL_REG_OVP 0x4d > +#define WLED_CTRL_REG_OVP_MASK GENMASK(1, 0) > > -#define WLED3_CTRL_REG_ILIMIT 0x4e > -#define WLED3_CTRL_REG_ILIMIT_MASK 0x07 > +#define WLED_CTRL_REG_ILIMIT 0x4e > +#define WLED_CTRL_REG_ILIMIT_MASK GENMASK(2, 0) > > -/* WLED3 sink registers */ > -#define WLED3_SINK_REG_SYNC 0x47 > -#define WLED3_SINK_REG_SYNC_MASK 0x07 > -#define WLED3_SINK_REG_SYNC_LED1 BIT(0) > -#define WLED3_SINK_REG_SYNC_LED2 BIT(1) > -#define WLED3_SINK_REG_SYNC_LED3 BIT(2) > -#define WLED3_SINK_REG_SYNC_ALL 0x07 > -#define WLED3_SINK_REG_SYNC_CLEAR 0x00 > +/* WLED sink registers */ > +#define WLED_SINK_REG_SYNC 0x47 > +#define WLED_SINK_REG_SYNC_CLEAR 0x00 > > #define WLED3_SINK_REG_CURR_SINK 0x4f > -#define WLED3_SINK_REG_CURR_SINK_MASK 0xe0 > -#define WLED3_SINK_REG_CURR_SINK_SHFT 0x05 > +#define WLED3_SINK_REG_CURR_SINK_MASK GENMASK(7, 5) > +#define WLED3_SINK_REG_CURR_SINK_SHFT 5 > > -/* WLED3 per-'string' registers below */ > -#define WLED3_SINK_REG_STR_OFFSET 0x10 > +/* WLED3 specific per-'string' registers below */ > +#define WLED3_SINK_REG_BRIGHT(n) (0x40 + n) > > -#define WLED3_SINK_REG_STR_MOD_EN_BASE 0x60 > +#define WLED3_SINK_REG_STR_MOD_EN(n) (0x60 + (n * 0x10)) > #define WLED3_SINK_REG_STR_MOD_MASK BIT(7) > -#define WLED3_SINK_REG_STR_MOD_EN BIT(7) > > -#define WLED3_SINK_REG_STR_FULL_SCALE_CURR 0x62 > -#define WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK 0x1f > +#define WLED3_SINK_REG_STR_FULL_SCALE_CURR(n) (0x62 + (n * 0x10)) > +#define WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK GENMASK(4, 0) > > -#define WLED3_SINK_REG_STR_MOD_SRC_BASE 0x63 > -#define WLED3_SINK_REG_STR_MOD_SRC_MASK 0x01 > +#define WLED3_SINK_REG_STR_MOD_SRC(n) (0x63 + (n * 0x10)) > +#define WLED3_SINK_REG_STR_MOD_SRC_MASK BIT(0) > #define WLED3_SINK_REG_STR_MOD_SRC_INT 0x00 > #define WLED3_SINK_REG_STR_MOD_SRC_EXT 0x01 > > -#define WLED3_SINK_REG_STR_CABC_BASE 0x66 > +#define WLED3_SINK_REG_STR_CABC(n) (0x66 + (n * 0x10)) > #define WLED3_SINK_REG_STR_CABC_MASK BIT(7) > -#define WLED3_SINK_REG_STR_CABC_EN BIT(7) > + > +struct wled_var_cfg { > + const u32 *values; > + u32 (*fn)(u32); > + int size; > +}; > + > +struct wled_u32_opts { > + const char *name; > + u32 *val_ptr; > + const struct wled_var_cfg *cfg; > +}; > + > +struct wled_bool_opts { > + const char *name; > + bool *val_ptr; > +}; > > struct wled_config { > u32 boost_i_limit; > @@ -75,132 +87,179 @@ struct wled_config { > u32 switch_freq; > u32 num_strings; > u32 string_i_limit; > + u32 enabled_strings[WLED_MAX_STRINGS]; > bool cs_out_en; > bool ext_gen; > - bool cabc_en; > + bool cabc; > }; > > struct wled { > const char *name; > + struct device *dev; > struct regmap *regmap; > - u16 addr; > + u16 ctrl_addr; > + u16 max_string_count; > + u32 brightness; > + u32 max_brightness; > > struct wled_config cfg; > + int (*wled_set_brightness)(struct wled *wled, u16 brightness); > }; > > +static int wled3_set_brightness(struct wled *wled, u16 brightness) > +{ > + int rc, i; > + u8 v[2]; > + > + v[0] = brightness & 0xff; > + v[1] = (brightness >> 8) & 0xf; > + > + for (i = 0; i < wled->cfg.num_strings; ++i) { > + rc = regmap_bulk_write(wled->regmap, wled->ctrl_addr + > + WLED3_SINK_REG_BRIGHT(i), v, 2); > + if (rc < 0) > + return rc; > + } > + > + return 0; > +} > + > +static int wled_module_enable(struct wled *wled, int val) > +{ > + int rc; > + > + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + > + WLED_CTRL_REG_MOD_EN, > + WLED_CTRL_REG_MOD_EN_MASK, > + val << WLED_CTRL_REG_MOD_EN_SHIFT); > + return rc; > +} > + > +static int wled_sync_toggle(struct wled *wled) > +{ > + int rc; > + unsigned int mask = GENMASK(wled->max_string_count - 1, 0); > + > + rc = regmap_update_bits(wled->regmap, > + wled->ctrl_addr + WLED_SINK_REG_SYNC, > + mask, mask); > + if (rc < 0) > + return rc; > + > + rc = regmap_update_bits(wled->regmap, > + wled->ctrl_addr + WLED_SINK_REG_SYNC, > + mask, WLED_SINK_REG_SYNC_CLEAR); > + > + return rc; > +} > + > static int wled_update_status(struct backlight_device *bl) > { > struct wled *wled = bl_get_data(bl); > - u16 val = bl->props.brightness; > - u8 ctrl = 0; > - int rc; > - int i; > + u16 brightness = bl->props.brightness; > + int rc = 0; > > if (bl->props.power != FB_BLANK_UNBLANK || > bl->props.fb_blank != FB_BLANK_UNBLANK || > bl->props.state & BL_CORE_FBBLANK) > - val = 0; > - > - if (val != 0) > - ctrl = WLED3_CTRL_REG_MOD_EN_BIT; > + brightness = 0; > > - rc = regmap_update_bits(wled->regmap, > - wled->addr + WLED3_CTRL_REG_MOD_EN, > - WLED3_CTRL_REG_MOD_EN_MASK, ctrl); > - if (rc) > - return rc; > + if (brightness) { > + rc = wled->wled_set_brightness(wled, brightness); > + if (rc < 0) { > + dev_err(wled->dev, "wled failed to set brightness rc:%d\n", > + rc); > + return rc; > + } > > - for (i = 0; i < wled->cfg.num_strings; ++i) { > - u8 v[2] = { val & 0xff, (val >> 8) & 0xf }; > + rc = wled_sync_toggle(wled); > + if (rc < 0) { > + dev_err(wled->dev, "wled sync failed rc:%d\n", rc); > + return rc; > + } > + } > > - rc = regmap_bulk_write(wled->regmap, > - wled->addr + WLED3_CTRL_REG_VAL_BASE + 2 * i, > - v, 2); > - if (rc) > + if (!!brightness != !!wled->brightness) { > + rc = wled_module_enable(wled, !!brightness); > + if (rc < 0) { > + dev_err(wled->dev, "wled enable failed rc:%d\n", rc); > return rc; > + } > } > > - rc = regmap_update_bits(wled->regmap, > - wled->addr + WLED3_SINK_REG_SYNC, > - WLED3_SINK_REG_SYNC_MASK, WLED3_SINK_REG_SYNC_ALL); > - if (rc) > - return rc; > + wled->brightness = brightness; > > - rc = regmap_update_bits(wled->regmap, > - wled->addr + WLED3_SINK_REG_SYNC, > - WLED3_SINK_REG_SYNC_MASK, WLED3_SINK_REG_SYNC_CLEAR); > return rc; > } > > -static int wled_setup(struct wled *wled) > +static int wled3_setup(struct wled *wled) > { > - int rc; > - int i; > + u16 addr; > + u8 sink_en = 0; > + int rc, i, j; > > rc = regmap_update_bits(wled->regmap, > - wled->addr + WLED3_CTRL_REG_OVP, > - WLED3_CTRL_REG_OVP_MASK, wled->cfg.ovp); > + wled->ctrl_addr + WLED_CTRL_REG_OVP, > + WLED_CTRL_REG_OVP_MASK, wled->cfg.ovp); > if (rc) > return rc; > > rc = regmap_update_bits(wled->regmap, > - wled->addr + WLED3_CTRL_REG_ILIMIT, > - WLED3_CTRL_REG_ILIMIT_MASK, wled->cfg.boost_i_limit); > + wled->ctrl_addr + WLED_CTRL_REG_ILIMIT, > + WLED_CTRL_REG_ILIMIT_MASK, > + wled->cfg.boost_i_limit); > if (rc) > return rc; > > rc = regmap_update_bits(wled->regmap, > - wled->addr + WLED3_CTRL_REG_FREQ, > - WLED3_CTRL_REG_FREQ_MASK, wled->cfg.switch_freq); > + wled->ctrl_addr + WLED_CTRL_REG_FREQ, > + WLED_CTRL_REG_FREQ_MASK, > + wled->cfg.switch_freq); > if (rc) > return rc; > > - if (wled->cfg.cs_out_en) { > - u8 all = (BIT(wled->cfg.num_strings) - 1) > - << WLED3_SINK_REG_CURR_SINK_SHFT; > - > - rc = regmap_update_bits(wled->regmap, > - wled->addr + WLED3_SINK_REG_CURR_SINK, > - WLED3_SINK_REG_CURR_SINK_MASK, all); > - if (rc) > - return rc; > - } > - > for (i = 0; i < wled->cfg.num_strings; ++i) { > - u16 addr = wled->addr + WLED3_SINK_REG_STR_OFFSET * i; > - > - rc = regmap_update_bits(wled->regmap, > - addr + WLED3_SINK_REG_STR_MOD_EN_BASE, > - WLED3_SINK_REG_STR_MOD_MASK, > - WLED3_SINK_REG_STR_MOD_EN); > + j = wled->cfg.enabled_strings[i]; > + addr = wled->ctrl_addr + WLED3_SINK_REG_STR_MOD_EN(j); > + rc = regmap_update_bits(wled->regmap, addr, > + WLED3_SINK_REG_STR_MOD_MASK, > + WLED3_SINK_REG_STR_MOD_MASK); > if (rc) > return rc; > > if (wled->cfg.ext_gen) { > - rc = regmap_update_bits(wled->regmap, > - addr + WLED3_SINK_REG_STR_MOD_SRC_BASE, > - WLED3_SINK_REG_STR_MOD_SRC_MASK, > - WLED3_SINK_REG_STR_MOD_SRC_EXT); > + addr = wled->ctrl_addr + WLED3_SINK_REG_STR_MOD_SRC(j); > + rc = regmap_update_bits(wled->regmap, addr, > + WLED3_SINK_REG_STR_MOD_SRC_MASK, > + WLED3_SINK_REG_STR_MOD_SRC_EXT); > if (rc) > return rc; > } > > - rc = regmap_update_bits(wled->regmap, > - addr + WLED3_SINK_REG_STR_FULL_SCALE_CURR, > - WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK, > - wled->cfg.string_i_limit); > + addr = wled->ctrl_addr + WLED3_SINK_REG_STR_FULL_SCALE_CURR(j); > + rc = regmap_update_bits(wled->regmap, addr, > + WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK, > + wled->cfg.string_i_limit); > if (rc) > return rc; > > - rc = regmap_update_bits(wled->regmap, > - addr + WLED3_SINK_REG_STR_CABC_BASE, > - WLED3_SINK_REG_STR_CABC_MASK, > - wled->cfg.cabc_en ? > - WLED3_SINK_REG_STR_CABC_EN : 0); > + addr = wled->ctrl_addr + WLED3_SINK_REG_STR_CABC(j); > + rc = regmap_update_bits(wled->regmap, addr, > + WLED3_SINK_REG_STR_CABC_MASK, > + wled->cfg.cabc ? > + WLED3_SINK_REG_STR_CABC_MASK : 0); > if (rc) > return rc; > + > + sink_en |= BIT(j + WLED3_SINK_REG_CURR_SINK_SHFT); > } > > + rc = regmap_update_bits(wled->regmap, > + wled->ctrl_addr + WLED3_SINK_REG_CURR_SINK, > + WLED3_SINK_REG_CURR_SINK_MASK, sink_en); > + if (rc) > + return rc; > + > return 0; > } > > @@ -208,17 +267,11 @@ static int wled_setup(struct wled *wled) > .boost_i_limit = 3, > .string_i_limit = 20, > .ovp = 2, > + .num_strings = 3, > .switch_freq = 5, > - .num_strings = 0, > .cs_out_en = false, > .ext_gen = false, > - .cabc_en = false, > -}; > - > -struct wled_var_cfg { > - const u32 *values; > - u32 (*fn)(u32); > - int size; > + .cabc = false, > }; > > static const u32 wled3_boost_i_limit_values[] = { > @@ -263,7 +316,11 @@ static u32 wled3_switch_freq_values_fn(u32 idx) > .size = 26, > }; > > -static u32 wled3_values(const struct wled_var_cfg *cfg, u32 idx) > +static const struct wled_var_cfg wled3_string_cfg = { > + .size = 8, > +}; > + > +static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx) > { > if (idx >= cfg->size) > return UINT_MAX; > @@ -274,68 +331,77 @@ static u32 wled3_values(const struct wled_var_cfg *cfg, u32 idx) > return idx; > } > > -static int wled_configure(struct wled *wled, struct device *dev) > +#define WLED3 3 > + > +static int wled_configure(struct wled *wled, int version) > { > struct wled_config *cfg = &wled->cfg; > - u32 val; > - int rc; > - u32 c; > - int i; > - int j; > - > - const struct { > - const char *name; > - u32 *val_ptr; > - const struct wled_var_cfg *cfg; > - } u32_opts[] = { > + struct device *dev = wled->dev; > + const __be32 *prop_addr; > + u32 size, val, c, string_len; > + int rc, i, j; > + > + const struct wled_u32_opts *u32_opts = NULL; > + const struct wled_u32_opts wled3_opts[] = { > { > - "qcom,current-boost-limit", > - &cfg->boost_i_limit, > + .name = "qcom,current-boost-limit", > + .val_ptr = &cfg->boost_i_limit, > .cfg = &wled3_boost_i_limit_cfg, > }, > { > - "qcom,current-limit", > - &cfg->string_i_limit, > + .name = "qcom,current-limit", > + .val_ptr = &cfg->string_i_limit, > .cfg = &wled3_string_i_limit_cfg, > }, > { > - "qcom,ovp", > - &cfg->ovp, > + .name = "qcom,ovp", > + .val_ptr = &cfg->ovp, > .cfg = &wled3_ovp_cfg, > }, > { > - "qcom,switching-freq", > - &cfg->switch_freq, > + .name = "qcom,switching-freq", > + .val_ptr = &cfg->switch_freq, > .cfg = &wled3_switch_freq_cfg, > }, > { > - "qcom,num-strings", > - &cfg->num_strings, > + .name = "qcom,num-strings", > + .val_ptr = &cfg->num_strings, > .cfg = &wled3_num_strings_cfg, > }, > }; > - const struct { > - const char *name; > - bool *val_ptr; > - } bool_opts[] = { > + > + const struct wled_bool_opts bool_opts[] = { > { "qcom,cs-out", &cfg->cs_out_en, }, > { "qcom,ext-gen", &cfg->ext_gen, }, > - { "qcom,cabc", &cfg->cabc_en, }, > + { "qcom,cabc", &cfg->cabc, }, > }; > > - rc = of_property_read_u32(dev->of_node, "reg", &val); > - if (rc || val > 0xffff) { > - dev_err(dev, "invalid IO resources\n"); > - return rc ? rc : -EINVAL; > + prop_addr = of_get_address(dev->of_node, 0, NULL, NULL); > + if (!prop_addr) { > + dev_err(wled->dev, "invalid IO resources\n"); > + return -EINVAL; > } > - wled->addr = val; > + wled->ctrl_addr = be32_to_cpu(*prop_addr); > > rc = of_property_read_string(dev->of_node, "label", &wled->name); > if (rc) > wled->name = dev->of_node->name; > > - *cfg = wled3_config_defaults; > - for (i = 0; i < ARRAY_SIZE(u32_opts); ++i) { > + switch (version) { > + case WLED3: > + u32_opts = wled3_opts; > + size = ARRAY_SIZE(wled3_opts); > + *cfg = wled3_config_defaults; > + wled->wled_set_brightness = wled3_set_brightness; > + wled->max_string_count = 3; > + break; > + > + default: > + dev_err(wled->dev, "Invalid WLED version\n"); > + break; > + } > + > + for (i = 0; i < size; ++i) { > rc = of_property_read_u32(dev->of_node, u32_opts[i].name, &val); > if (rc == -EINVAL) { > continue; > @@ -346,12 +412,15 @@ static int wled_configure(struct wled *wled, struct device *dev) > > c = UINT_MAX; > for (j = 0; c != val; j++) { > - c = wled3_values(u32_opts[i].cfg, j); > + c = wled_values(u32_opts[i].cfg, j); > if (c == UINT_MAX) { > dev_err(dev, "invalid value for '%s'\n", > u32_opts[i].name); > return -EINVAL; > } > + > + if (c == val) > + break; > } > > dev_dbg(dev, "'%s' = %u\n", u32_opts[i].name, c); > @@ -365,6 +434,15 @@ static int wled_configure(struct wled *wled, struct device *dev) > > cfg->num_strings = cfg->num_strings + 1; > > + string_len = of_property_count_elems_of_size(dev->of_node, > + "qcom,enabled-strings", > + sizeof(u32)); > + if (string_len > 0) > + rc = of_property_read_u32_array(dev->of_node, > + "qcom,enabled-strings", > + wled->cfg.enabled_strings, > + sizeof(u32)); > + > return 0; > } > > @@ -378,6 +456,7 @@ static int wled_probe(struct platform_device *pdev) > struct backlight_device *bl; > struct wled *wled; > struct regmap *regmap; > + int version; > u32 val; > int rc; > > @@ -392,22 +471,39 @@ static int wled_probe(struct platform_device *pdev) > return -ENOMEM; > > wled->regmap = regmap; > + wled->dev = &pdev->dev; > > - rc = wled_configure(wled, &pdev->dev); > - if (rc) > - return rc; > + version = (uintptr_t)of_device_get_match_data(&pdev->dev); > + if (!version) { > + dev_err(&pdev->dev, "Unknown device version\n"); > + return -ENODEV; > + } > > - rc = wled_setup(wled); > + rc = wled_configure(wled, version); > if (rc) > return rc; > > + switch (version) { > + case WLED3: > + rc = wled3_setup(wled); > + if (rc) { > + dev_err(&pdev->dev, "wled3_setup failed\n"); > + return rc; > + } > + break; > + > + default: > + dev_err(wled->dev, "Invalid WLED version\n"); > + break; > + } > + > val = WLED_DEFAULT_BRIGHTNESS; > of_property_read_u32(pdev->dev.of_node, "default-brightness", &val); > > memset(&props, 0, sizeof(struct backlight_properties)); > props.type = BACKLIGHT_RAW; > props.brightness = val; > - props.max_brightness = WLED3_SINK_REG_BRIGHT_MAX; > + props.max_brightness = WLED_SINK_REG_BRIGHT_MAX; > bl = devm_backlight_device_register(&pdev->dev, wled->name, > &pdev->dev, wled, > &wled_ops, &props); > @@ -415,7 +511,7 @@ static int wled_probe(struct platform_device *pdev) > }; > > static const struct of_device_id wled_match_table[] = { > - { .compatible = "qcom,pm8941-wled" }, > + { .compatible = "qcom,pm8941-wled", .data = (void *)3 }, > {} > }; > MODULE_DEVICE_TABLE(of, wled_match_table); > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon 09 Jul 03:22 PDT 2018, Kiran Gunda wrote: > diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c [..] > @@ -365,6 +434,15 @@ static int wled_configure(struct wled *wled, struct device *dev) > > cfg->num_strings = cfg->num_strings + 1; > > + string_len = of_property_count_elems_of_size(dev->of_node, > + "qcom,enabled-strings", > + sizeof(u32)); > + if (string_len > 0) > + rc = of_property_read_u32_array(dev->of_node, > + "qcom,enabled-strings", > + wled->cfg.enabled_strings, qcom,enabled-strings is listed as optional, but without it we will end up with qcom,num-strings zeros in an array. Initialize wled->cfg.enabled_strings to 0,1,2,3 and the driver will be backwards compatible. I also think that if you do qcom,enabled-strings = <0, 1, 2>; there's no need to also specify qcom,num-strings = <3>; and we can just use string_len for num_strings. > + sizeof(u32)); > + > return 0; > } Regards, Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2018-08-07 11:07, Bjorn Andersson wrote: > On Mon 09 Jul 03:22 PDT 2018, Kiran Gunda wrote: >> diff --git a/drivers/video/backlight/qcom-wled.c >> b/drivers/video/backlight/qcom-wled.c > [..] >> @@ -365,6 +434,15 @@ static int wled_configure(struct wled *wled, >> struct device *dev) >> >> cfg->num_strings = cfg->num_strings + 1; >> >> + string_len = of_property_count_elems_of_size(dev->of_node, >> + "qcom,enabled-strings", >> + sizeof(u32)); >> + if (string_len > 0) >> + rc = of_property_read_u32_array(dev->of_node, >> + "qcom,enabled-strings", >> + wled->cfg.enabled_strings, > > qcom,enabled-strings is listed as optional, but without it we will end > up with qcom,num-strings zeros in an array. Initialize > wled->cfg.enabled_strings to 0,1,2,3 and the driver will be backwards > compatible. > Correct. I will initialize the array in the next series. > I also think that if you do qcom,enabled-strings = <0, 1, 2>; there's > no > need to also specify qcom,num-strings = <3>; and we can just use > string_len for num_strings. Correct. But I have kept this property to have the backward compatibility with the old driver (WLED3). > >> + sizeof(u32)); >> + >> return 0; >> } > > Regards, > Bjorn > -- > To unsubscribe from this list: send the line "unsubscribe > linux-arm-msm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c index 3cd6e75..87fc1d0 100644 --- a/drivers/video/backlight/qcom-wled.c +++ b/drivers/video/backlight/qcom-wled.c @@ -15,59 +15,71 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/of_address.h> #include <linux/regmap.h> /* From DT binding */ +#define WLED_MAX_STRINGS 4 + #define WLED_DEFAULT_BRIGHTNESS 2048 -#define WLED3_SINK_REG_BRIGHT_MAX 0xFFF -#define WLED3_CTRL_REG_VAL_BASE 0x40 +#define WLED_SINK_REG_BRIGHT_MAX 0xFFF -/* WLED3 control registers */ -#define WLED3_CTRL_REG_MOD_EN 0x46 -#define WLED3_CTRL_REG_MOD_EN_BIT BIT(7) -#define WLED3_CTRL_REG_MOD_EN_MASK BIT(7) +/* WLED control registers */ +#define WLED_CTRL_REG_MOD_EN 0x46 +#define WLED_CTRL_REG_MOD_EN_MASK BIT(7) +#define WLED_CTRL_REG_MOD_EN_SHIFT 7 -#define WLED3_CTRL_REG_FREQ 0x4c -#define WLED3_CTRL_REG_FREQ_MASK 0x0f +#define WLED_CTRL_REG_FREQ 0x4c +#define WLED_CTRL_REG_FREQ_MASK GENMASK(3, 0) -#define WLED3_CTRL_REG_OVP 0x4d -#define WLED3_CTRL_REG_OVP_MASK 0x03 +#define WLED_CTRL_REG_OVP 0x4d +#define WLED_CTRL_REG_OVP_MASK GENMASK(1, 0) -#define WLED3_CTRL_REG_ILIMIT 0x4e -#define WLED3_CTRL_REG_ILIMIT_MASK 0x07 +#define WLED_CTRL_REG_ILIMIT 0x4e +#define WLED_CTRL_REG_ILIMIT_MASK GENMASK(2, 0) -/* WLED3 sink registers */ -#define WLED3_SINK_REG_SYNC 0x47 -#define WLED3_SINK_REG_SYNC_MASK 0x07 -#define WLED3_SINK_REG_SYNC_LED1 BIT(0) -#define WLED3_SINK_REG_SYNC_LED2 BIT(1) -#define WLED3_SINK_REG_SYNC_LED3 BIT(2) -#define WLED3_SINK_REG_SYNC_ALL 0x07 -#define WLED3_SINK_REG_SYNC_CLEAR 0x00 +/* WLED sink registers */ +#define WLED_SINK_REG_SYNC 0x47 +#define WLED_SINK_REG_SYNC_CLEAR 0x00 #define WLED3_SINK_REG_CURR_SINK 0x4f -#define WLED3_SINK_REG_CURR_SINK_MASK 0xe0 -#define WLED3_SINK_REG_CURR_SINK_SHFT 0x05 +#define WLED3_SINK_REG_CURR_SINK_MASK GENMASK(7, 5) +#define WLED3_SINK_REG_CURR_SINK_SHFT 5 -/* WLED3 per-'string' registers below */ -#define WLED3_SINK_REG_STR_OFFSET 0x10 +/* WLED3 specific per-'string' registers below */ +#define WLED3_SINK_REG_BRIGHT(n) (0x40 + n) -#define WLED3_SINK_REG_STR_MOD_EN_BASE 0x60 +#define WLED3_SINK_REG_STR_MOD_EN(n) (0x60 + (n * 0x10)) #define WLED3_SINK_REG_STR_MOD_MASK BIT(7) -#define WLED3_SINK_REG_STR_MOD_EN BIT(7) -#define WLED3_SINK_REG_STR_FULL_SCALE_CURR 0x62 -#define WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK 0x1f +#define WLED3_SINK_REG_STR_FULL_SCALE_CURR(n) (0x62 + (n * 0x10)) +#define WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK GENMASK(4, 0) -#define WLED3_SINK_REG_STR_MOD_SRC_BASE 0x63 -#define WLED3_SINK_REG_STR_MOD_SRC_MASK 0x01 +#define WLED3_SINK_REG_STR_MOD_SRC(n) (0x63 + (n * 0x10)) +#define WLED3_SINK_REG_STR_MOD_SRC_MASK BIT(0) #define WLED3_SINK_REG_STR_MOD_SRC_INT 0x00 #define WLED3_SINK_REG_STR_MOD_SRC_EXT 0x01 -#define WLED3_SINK_REG_STR_CABC_BASE 0x66 +#define WLED3_SINK_REG_STR_CABC(n) (0x66 + (n * 0x10)) #define WLED3_SINK_REG_STR_CABC_MASK BIT(7) -#define WLED3_SINK_REG_STR_CABC_EN BIT(7) + +struct wled_var_cfg { + const u32 *values; + u32 (*fn)(u32); + int size; +}; + +struct wled_u32_opts { + const char *name; + u32 *val_ptr; + const struct wled_var_cfg *cfg; +}; + +struct wled_bool_opts { + const char *name; + bool *val_ptr; +}; struct wled_config { u32 boost_i_limit; @@ -75,132 +87,179 @@ struct wled_config { u32 switch_freq; u32 num_strings; u32 string_i_limit; + u32 enabled_strings[WLED_MAX_STRINGS]; bool cs_out_en; bool ext_gen; - bool cabc_en; + bool cabc; }; struct wled { const char *name; + struct device *dev; struct regmap *regmap; - u16 addr; + u16 ctrl_addr; + u16 max_string_count; + u32 brightness; + u32 max_brightness; struct wled_config cfg; + int (*wled_set_brightness)(struct wled *wled, u16 brightness); }; +static int wled3_set_brightness(struct wled *wled, u16 brightness) +{ + int rc, i; + u8 v[2]; + + v[0] = brightness & 0xff; + v[1] = (brightness >> 8) & 0xf; + + for (i = 0; i < wled->cfg.num_strings; ++i) { + rc = regmap_bulk_write(wled->regmap, wled->ctrl_addr + + WLED3_SINK_REG_BRIGHT(i), v, 2); + if (rc < 0) + return rc; + } + + return 0; +} + +static int wled_module_enable(struct wled *wled, int val) +{ + int rc; + + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + + WLED_CTRL_REG_MOD_EN, + WLED_CTRL_REG_MOD_EN_MASK, + val << WLED_CTRL_REG_MOD_EN_SHIFT); + return rc; +} + +static int wled_sync_toggle(struct wled *wled) +{ + int rc; + unsigned int mask = GENMASK(wled->max_string_count - 1, 0); + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED_SINK_REG_SYNC, + mask, mask); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED_SINK_REG_SYNC, + mask, WLED_SINK_REG_SYNC_CLEAR); + + return rc; +} + static int wled_update_status(struct backlight_device *bl) { struct wled *wled = bl_get_data(bl); - u16 val = bl->props.brightness; - u8 ctrl = 0; - int rc; - int i; + u16 brightness = bl->props.brightness; + int rc = 0; if (bl->props.power != FB_BLANK_UNBLANK || bl->props.fb_blank != FB_BLANK_UNBLANK || bl->props.state & BL_CORE_FBBLANK) - val = 0; - - if (val != 0) - ctrl = WLED3_CTRL_REG_MOD_EN_BIT; + brightness = 0; - rc = regmap_update_bits(wled->regmap, - wled->addr + WLED3_CTRL_REG_MOD_EN, - WLED3_CTRL_REG_MOD_EN_MASK, ctrl); - if (rc) - return rc; + if (brightness) { + rc = wled->wled_set_brightness(wled, brightness); + if (rc < 0) { + dev_err(wled->dev, "wled failed to set brightness rc:%d\n", + rc); + return rc; + } - for (i = 0; i < wled->cfg.num_strings; ++i) { - u8 v[2] = { val & 0xff, (val >> 8) & 0xf }; + rc = wled_sync_toggle(wled); + if (rc < 0) { + dev_err(wled->dev, "wled sync failed rc:%d\n", rc); + return rc; + } + } - rc = regmap_bulk_write(wled->regmap, - wled->addr + WLED3_CTRL_REG_VAL_BASE + 2 * i, - v, 2); - if (rc) + if (!!brightness != !!wled->brightness) { + rc = wled_module_enable(wled, !!brightness); + if (rc < 0) { + dev_err(wled->dev, "wled enable failed rc:%d\n", rc); return rc; + } } - rc = regmap_update_bits(wled->regmap, - wled->addr + WLED3_SINK_REG_SYNC, - WLED3_SINK_REG_SYNC_MASK, WLED3_SINK_REG_SYNC_ALL); - if (rc) - return rc; + wled->brightness = brightness; - rc = regmap_update_bits(wled->regmap, - wled->addr + WLED3_SINK_REG_SYNC, - WLED3_SINK_REG_SYNC_MASK, WLED3_SINK_REG_SYNC_CLEAR); return rc; } -static int wled_setup(struct wled *wled) +static int wled3_setup(struct wled *wled) { - int rc; - int i; + u16 addr; + u8 sink_en = 0; + int rc, i, j; rc = regmap_update_bits(wled->regmap, - wled->addr + WLED3_CTRL_REG_OVP, - WLED3_CTRL_REG_OVP_MASK, wled->cfg.ovp); + wled->ctrl_addr + WLED_CTRL_REG_OVP, + WLED_CTRL_REG_OVP_MASK, wled->cfg.ovp); if (rc) return rc; rc = regmap_update_bits(wled->regmap, - wled->addr + WLED3_CTRL_REG_ILIMIT, - WLED3_CTRL_REG_ILIMIT_MASK, wled->cfg.boost_i_limit); + wled->ctrl_addr + WLED_CTRL_REG_ILIMIT, + WLED_CTRL_REG_ILIMIT_MASK, + wled->cfg.boost_i_limit); if (rc) return rc; rc = regmap_update_bits(wled->regmap, - wled->addr + WLED3_CTRL_REG_FREQ, - WLED3_CTRL_REG_FREQ_MASK, wled->cfg.switch_freq); + wled->ctrl_addr + WLED_CTRL_REG_FREQ, + WLED_CTRL_REG_FREQ_MASK, + wled->cfg.switch_freq); if (rc) return rc; - if (wled->cfg.cs_out_en) { - u8 all = (BIT(wled->cfg.num_strings) - 1) - << WLED3_SINK_REG_CURR_SINK_SHFT; - - rc = regmap_update_bits(wled->regmap, - wled->addr + WLED3_SINK_REG_CURR_SINK, - WLED3_SINK_REG_CURR_SINK_MASK, all); - if (rc) - return rc; - } - for (i = 0; i < wled->cfg.num_strings; ++i) { - u16 addr = wled->addr + WLED3_SINK_REG_STR_OFFSET * i; - - rc = regmap_update_bits(wled->regmap, - addr + WLED3_SINK_REG_STR_MOD_EN_BASE, - WLED3_SINK_REG_STR_MOD_MASK, - WLED3_SINK_REG_STR_MOD_EN); + j = wled->cfg.enabled_strings[i]; + addr = wled->ctrl_addr + WLED3_SINK_REG_STR_MOD_EN(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED3_SINK_REG_STR_MOD_MASK, + WLED3_SINK_REG_STR_MOD_MASK); if (rc) return rc; if (wled->cfg.ext_gen) { - rc = regmap_update_bits(wled->regmap, - addr + WLED3_SINK_REG_STR_MOD_SRC_BASE, - WLED3_SINK_REG_STR_MOD_SRC_MASK, - WLED3_SINK_REG_STR_MOD_SRC_EXT); + addr = wled->ctrl_addr + WLED3_SINK_REG_STR_MOD_SRC(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED3_SINK_REG_STR_MOD_SRC_MASK, + WLED3_SINK_REG_STR_MOD_SRC_EXT); if (rc) return rc; } - rc = regmap_update_bits(wled->regmap, - addr + WLED3_SINK_REG_STR_FULL_SCALE_CURR, - WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK, - wled->cfg.string_i_limit); + addr = wled->ctrl_addr + WLED3_SINK_REG_STR_FULL_SCALE_CURR(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK, + wled->cfg.string_i_limit); if (rc) return rc; - rc = regmap_update_bits(wled->regmap, - addr + WLED3_SINK_REG_STR_CABC_BASE, - WLED3_SINK_REG_STR_CABC_MASK, - wled->cfg.cabc_en ? - WLED3_SINK_REG_STR_CABC_EN : 0); + addr = wled->ctrl_addr + WLED3_SINK_REG_STR_CABC(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED3_SINK_REG_STR_CABC_MASK, + wled->cfg.cabc ? + WLED3_SINK_REG_STR_CABC_MASK : 0); if (rc) return rc; + + sink_en |= BIT(j + WLED3_SINK_REG_CURR_SINK_SHFT); } + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_SINK_REG_CURR_SINK, + WLED3_SINK_REG_CURR_SINK_MASK, sink_en); + if (rc) + return rc; + return 0; } @@ -208,17 +267,11 @@ static int wled_setup(struct wled *wled) .boost_i_limit = 3, .string_i_limit = 20, .ovp = 2, + .num_strings = 3, .switch_freq = 5, - .num_strings = 0, .cs_out_en = false, .ext_gen = false, - .cabc_en = false, -}; - -struct wled_var_cfg { - const u32 *values; - u32 (*fn)(u32); - int size; + .cabc = false, }; static const u32 wled3_boost_i_limit_values[] = { @@ -263,7 +316,11 @@ static u32 wled3_switch_freq_values_fn(u32 idx) .size = 26, }; -static u32 wled3_values(const struct wled_var_cfg *cfg, u32 idx) +static const struct wled_var_cfg wled3_string_cfg = { + .size = 8, +}; + +static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx) { if (idx >= cfg->size) return UINT_MAX; @@ -274,68 +331,77 @@ static u32 wled3_values(const struct wled_var_cfg *cfg, u32 idx) return idx; } -static int wled_configure(struct wled *wled, struct device *dev) +#define WLED3 3 + +static int wled_configure(struct wled *wled, int version) { struct wled_config *cfg = &wled->cfg; - u32 val; - int rc; - u32 c; - int i; - int j; - - const struct { - const char *name; - u32 *val_ptr; - const struct wled_var_cfg *cfg; - } u32_opts[] = { + struct device *dev = wled->dev; + const __be32 *prop_addr; + u32 size, val, c, string_len; + int rc, i, j; + + const struct wled_u32_opts *u32_opts = NULL; + const struct wled_u32_opts wled3_opts[] = { { - "qcom,current-boost-limit", - &cfg->boost_i_limit, + .name = "qcom,current-boost-limit", + .val_ptr = &cfg->boost_i_limit, .cfg = &wled3_boost_i_limit_cfg, }, { - "qcom,current-limit", - &cfg->string_i_limit, + .name = "qcom,current-limit", + .val_ptr = &cfg->string_i_limit, .cfg = &wled3_string_i_limit_cfg, }, { - "qcom,ovp", - &cfg->ovp, + .name = "qcom,ovp", + .val_ptr = &cfg->ovp, .cfg = &wled3_ovp_cfg, }, { - "qcom,switching-freq", - &cfg->switch_freq, + .name = "qcom,switching-freq", + .val_ptr = &cfg->switch_freq, .cfg = &wled3_switch_freq_cfg, }, { - "qcom,num-strings", - &cfg->num_strings, + .name = "qcom,num-strings", + .val_ptr = &cfg->num_strings, .cfg = &wled3_num_strings_cfg, }, }; - const struct { - const char *name; - bool *val_ptr; - } bool_opts[] = { + + const struct wled_bool_opts bool_opts[] = { { "qcom,cs-out", &cfg->cs_out_en, }, { "qcom,ext-gen", &cfg->ext_gen, }, - { "qcom,cabc", &cfg->cabc_en, }, + { "qcom,cabc", &cfg->cabc, }, }; - rc = of_property_read_u32(dev->of_node, "reg", &val); - if (rc || val > 0xffff) { - dev_err(dev, "invalid IO resources\n"); - return rc ? rc : -EINVAL; + prop_addr = of_get_address(dev->of_node, 0, NULL, NULL); + if (!prop_addr) { + dev_err(wled->dev, "invalid IO resources\n"); + return -EINVAL; } - wled->addr = val; + wled->ctrl_addr = be32_to_cpu(*prop_addr); rc = of_property_read_string(dev->of_node, "label", &wled->name); if (rc) wled->name = dev->of_node->name; - *cfg = wled3_config_defaults; - for (i = 0; i < ARRAY_SIZE(u32_opts); ++i) { + switch (version) { + case WLED3: + u32_opts = wled3_opts; + size = ARRAY_SIZE(wled3_opts); + *cfg = wled3_config_defaults; + wled->wled_set_brightness = wled3_set_brightness; + wled->max_string_count = 3; + break; + + default: + dev_err(wled->dev, "Invalid WLED version\n"); + break; + } + + for (i = 0; i < size; ++i) { rc = of_property_read_u32(dev->of_node, u32_opts[i].name, &val); if (rc == -EINVAL) { continue; @@ -346,12 +412,15 @@ static int wled_configure(struct wled *wled, struct device *dev) c = UINT_MAX; for (j = 0; c != val; j++) { - c = wled3_values(u32_opts[i].cfg, j); + c = wled_values(u32_opts[i].cfg, j); if (c == UINT_MAX) { dev_err(dev, "invalid value for '%s'\n", u32_opts[i].name); return -EINVAL; } + + if (c == val) + break; } dev_dbg(dev, "'%s' = %u\n", u32_opts[i].name, c); @@ -365,6 +434,15 @@ static int wled_configure(struct wled *wled, struct device *dev) cfg->num_strings = cfg->num_strings + 1; + string_len = of_property_count_elems_of_size(dev->of_node, + "qcom,enabled-strings", + sizeof(u32)); + if (string_len > 0) + rc = of_property_read_u32_array(dev->of_node, + "qcom,enabled-strings", + wled->cfg.enabled_strings, + sizeof(u32)); + return 0; } @@ -378,6 +456,7 @@ static int wled_probe(struct platform_device *pdev) struct backlight_device *bl; struct wled *wled; struct regmap *regmap; + int version; u32 val; int rc; @@ -392,22 +471,39 @@ static int wled_probe(struct platform_device *pdev) return -ENOMEM; wled->regmap = regmap; + wled->dev = &pdev->dev; - rc = wled_configure(wled, &pdev->dev); - if (rc) - return rc; + version = (uintptr_t)of_device_get_match_data(&pdev->dev); + if (!version) { + dev_err(&pdev->dev, "Unknown device version\n"); + return -ENODEV; + } - rc = wled_setup(wled); + rc = wled_configure(wled, version); if (rc) return rc; + switch (version) { + case WLED3: + rc = wled3_setup(wled); + if (rc) { + dev_err(&pdev->dev, "wled3_setup failed\n"); + return rc; + } + break; + + default: + dev_err(wled->dev, "Invalid WLED version\n"); + break; + } + val = WLED_DEFAULT_BRIGHTNESS; of_property_read_u32(pdev->dev.of_node, "default-brightness", &val); memset(&props, 0, sizeof(struct backlight_properties)); props.type = BACKLIGHT_RAW; props.brightness = val; - props.max_brightness = WLED3_SINK_REG_BRIGHT_MAX; + props.max_brightness = WLED_SINK_REG_BRIGHT_MAX; bl = devm_backlight_device_register(&pdev->dev, wled->name, &pdev->dev, wled, &wled_ops, &props); @@ -415,7 +511,7 @@ static int wled_probe(struct platform_device *pdev) }; static const struct of_device_id wled_match_table[] = { - { .compatible = "qcom,pm8941-wled" }, + { .compatible = "qcom,pm8941-wled", .data = (void *)3 }, {} }; MODULE_DEVICE_TABLE(of, wled_match_table);
Restructure the driver to add the support for new WLED peripherals. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> --- Changes from V3: - This is the new patch after splitting the "backlight: qcom-wled: Add support for WLED4 peripheral" patch to seperate the WLED3 specific restructure. drivers/video/backlight/qcom-wled.c | 396 ++++++++++++++++++++++-------------- 1 file changed, 246 insertions(+), 150 deletions(-)