Message ID | 1535034528-11590-3-git-send-email-vgarodia@codeaurora.org (mailing list archive) |
---|---|
State | Not Applicable, archived |
Delegated to: | Andy Gross |
Headers | show |
Series | Venus updates - PIL | expand |
On Thu, Aug 23, 2018 at 11:29 PM Vikash Garodia <vgarodia@codeaurora.org> wrote: > > Separate firmware loading part into a new function. > > Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org> > --- > drivers/media/platform/qcom/venus/core.c | 4 +- > drivers/media/platform/qcom/venus/firmware.c | 55 ++++++++++++++++++---------- > drivers/media/platform/qcom/venus/firmware.h | 2 +- > 3 files changed, 38 insertions(+), 23 deletions(-) > > diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c > index bb6add9..75b9785 100644 > --- a/drivers/media/platform/qcom/venus/core.c > +++ b/drivers/media/platform/qcom/venus/core.c > @@ -84,7 +84,7 @@ static void venus_sys_error_handler(struct work_struct *work) > > pm_runtime_get_sync(core->dev); > > - ret |= venus_boot(core->dev, core->res->fwname); > + ret |= venus_boot(core); > > ret |= hfi_core_resume(core, true); > > @@ -284,7 +284,7 @@ static int venus_probe(struct platform_device *pdev) > if (ret < 0) > goto err_runtime_disable; > > - ret = venus_boot(dev, core->res->fwname); > + ret = venus_boot(core); > if (ret) > goto err_runtime_disable; > > diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c > index a9d042e..34224eb 100644 > --- a/drivers/media/platform/qcom/venus/firmware.c > +++ b/drivers/media/platform/qcom/venus/firmware.c > @@ -60,20 +60,18 @@ int venus_set_hw_state(struct venus_core *core, bool resume) > return 0; > } > > -int venus_boot(struct device *dev, const char *fwname) > +static int venus_load_fw(struct venus_core *core, const char *fwname, > + phys_addr_t *mem_phys, size_t *mem_size) Following the remarks of the previous patch, you would have mem_phys and mem_size as members of venus_core (probably renamed as fw_mem_addr and fw_mem_size). > { > const struct firmware *mdt; > struct device_node *node; > - phys_addr_t mem_phys; > + struct device *dev; > struct resource r; > ssize_t fw_size; > - size_t mem_size; > void *mem_va; > int ret; > > - if (!IS_ENABLED(CONFIG_QCOM_MDT_LOADER) || !qcom_scm_is_available()) > - return -EPROBE_DEFER; !IS_ENABLED(CONFIG_QCOM_MDT_LOADER) is not a condition that can change at runtime, and returning -EPROBE_DEFER in that case seems erroneous to me. Instead, wouldn't it make more sense to make the driver depend on QCOM_MDT_LOADER? > - > + dev = core->dev; > node = of_parse_phandle(dev->of_node, "memory-region", 0); > if (!node) { > dev_err(dev, "no memory-region specified\n"); > @@ -84,16 +82,16 @@ int venus_boot(struct device *dev, const char *fwname) > if (ret) > return ret; > > - mem_phys = r.start; > - mem_size = resource_size(&r); > + *mem_phys = r.start; > + *mem_size = resource_size(&r); > > - if (mem_size < VENUS_FW_MEM_SIZE) > + if (*mem_size < VENUS_FW_MEM_SIZE) > return -EINVAL; > > - mem_va = memremap(r.start, mem_size, MEMREMAP_WC); > + mem_va = memremap(r.start, *mem_size, MEMREMAP_WC); > if (!mem_va) { > dev_err(dev, "unable to map memory region: %pa+%zx\n", > - &r.start, mem_size); > + &r.start, *mem_size); > return -ENOMEM; > } > > @@ -108,23 +106,40 @@ int venus_boot(struct device *dev, const char *fwname) > goto err_unmap; > } > > - ret = qcom_mdt_load(dev, mdt, fwname, VENUS_PAS_ID, mem_va, mem_phys, > - mem_size, NULL); > + if (core->no_tz) > + ret = qcom_mdt_load_no_init(dev, mdt, fwname, VENUS_PAS_ID, > + mem_va, *mem_phys, *mem_size, NULL); > + else > + ret = qcom_mdt_load(dev, mdt, fwname, VENUS_PAS_ID, > + mem_va, *mem_phys, *mem_size, NULL); > > release_firmware(mdt); > > - if (ret) > - goto err_unmap; > - > - ret = qcom_scm_pas_auth_and_reset(VENUS_PAS_ID); > - if (ret) > - goto err_unmap; > - > err_unmap: > memunmap(mem_va); > return ret; > } > > +int venus_boot(struct venus_core *core) > +{ > + struct device *dev = core->dev; > + phys_addr_t mem_phys; > + size_t mem_size; > + int ret; > + > + if (!IS_ENABLED(CONFIG_QCOM_MDT_LOADER) || > + (!core->no_tz && !qcom_scm_is_available())) > + return -EPROBE_DEFER; Same remark as above here.
Hi Alex, On 08/24/2018 10:39 AM, Alexandre Courbot wrote: > On Thu, Aug 23, 2018 at 11:29 PM Vikash Garodia <vgarodia@codeaurora.org> wrote: >> >> Separate firmware loading part into a new function. >> >> Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org> >> --- >> drivers/media/platform/qcom/venus/core.c | 4 +- >> drivers/media/platform/qcom/venus/firmware.c | 55 ++++++++++++++++++---------- >> drivers/media/platform/qcom/venus/firmware.h | 2 +- >> 3 files changed, 38 insertions(+), 23 deletions(-) >> >> diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c >> index bb6add9..75b9785 100644 >> --- a/drivers/media/platform/qcom/venus/core.c >> +++ b/drivers/media/platform/qcom/venus/core.c >> @@ -84,7 +84,7 @@ static void venus_sys_error_handler(struct work_struct *work) >> >> pm_runtime_get_sync(core->dev); >> >> - ret |= venus_boot(core->dev, core->res->fwname); >> + ret |= venus_boot(core); >> >> ret |= hfi_core_resume(core, true); >> >> @@ -284,7 +284,7 @@ static int venus_probe(struct platform_device *pdev) >> if (ret < 0) >> goto err_runtime_disable; >> >> - ret = venus_boot(dev, core->res->fwname); >> + ret = venus_boot(core); >> if (ret) >> goto err_runtime_disable; >> >> diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c >> index a9d042e..34224eb 100644 >> --- a/drivers/media/platform/qcom/venus/firmware.c >> +++ b/drivers/media/platform/qcom/venus/firmware.c >> @@ -60,20 +60,18 @@ int venus_set_hw_state(struct venus_core *core, bool resume) >> return 0; >> } >> >> -int venus_boot(struct device *dev, const char *fwname) >> +static int venus_load_fw(struct venus_core *core, const char *fwname, >> + phys_addr_t *mem_phys, size_t *mem_size) > > Following the remarks of the previous patch, you would have mem_phys > and mem_size as members of venus_core (probably renamed as fw_mem_addr > and fw_mem_size). > >> { >> const struct firmware *mdt; >> struct device_node *node; >> - phys_addr_t mem_phys; >> + struct device *dev; >> struct resource r; >> ssize_t fw_size; >> - size_t mem_size; >> void *mem_va; >> int ret; >> >> - if (!IS_ENABLED(CONFIG_QCOM_MDT_LOADER) || !qcom_scm_is_available()) >> - return -EPROBE_DEFER; > > !IS_ENABLED(CONFIG_QCOM_MDT_LOADER) is not a condition that can change > at runtime, and returning -EPROBE_DEFER in that case seems erroneous > to me. Instead, wouldn't it make more sense to make the driver depend > on QCOM_MDT_LOADER? That was made on purpose, for more info git show b8f9bdc151e4a
On Fri, Aug 24, 2018 at 6:01 PM Stanimir Varbanov <stanimir.varbanov@linaro.org> wrote: > > Hi Alex, > > On 08/24/2018 10:39 AM, Alexandre Courbot wrote: > > On Thu, Aug 23, 2018 at 11:29 PM Vikash Garodia <vgarodia@codeaurora.org> wrote: > >> > >> Separate firmware loading part into a new function. > >> > >> Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org> > >> --- > >> drivers/media/platform/qcom/venus/core.c | 4 +- > >> drivers/media/platform/qcom/venus/firmware.c | 55 ++++++++++++++++++---------- > >> drivers/media/platform/qcom/venus/firmware.h | 2 +- > >> 3 files changed, 38 insertions(+), 23 deletions(-) > >> > >> diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c > >> index bb6add9..75b9785 100644 > >> --- a/drivers/media/platform/qcom/venus/core.c > >> +++ b/drivers/media/platform/qcom/venus/core.c > >> @@ -84,7 +84,7 @@ static void venus_sys_error_handler(struct work_struct *work) > >> > >> pm_runtime_get_sync(core->dev); > >> > >> - ret |= venus_boot(core->dev, core->res->fwname); > >> + ret |= venus_boot(core); > >> > >> ret |= hfi_core_resume(core, true); > >> > >> @@ -284,7 +284,7 @@ static int venus_probe(struct platform_device *pdev) > >> if (ret < 0) > >> goto err_runtime_disable; > >> > >> - ret = venus_boot(dev, core->res->fwname); > >> + ret = venus_boot(core); > >> if (ret) > >> goto err_runtime_disable; > >> > >> diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c > >> index a9d042e..34224eb 100644 > >> --- a/drivers/media/platform/qcom/venus/firmware.c > >> +++ b/drivers/media/platform/qcom/venus/firmware.c > >> @@ -60,20 +60,18 @@ int venus_set_hw_state(struct venus_core *core, bool resume) > >> return 0; > >> } > >> > >> -int venus_boot(struct device *dev, const char *fwname) > >> +static int venus_load_fw(struct venus_core *core, const char *fwname, > >> + phys_addr_t *mem_phys, size_t *mem_size) > > > > Following the remarks of the previous patch, you would have mem_phys > > and mem_size as members of venus_core (probably renamed as fw_mem_addr > > and fw_mem_size). > > > >> { > >> const struct firmware *mdt; > >> struct device_node *node; > >> - phys_addr_t mem_phys; > >> + struct device *dev; > >> struct resource r; > >> ssize_t fw_size; > >> - size_t mem_size; > >> void *mem_va; > >> int ret; > >> > >> - if (!IS_ENABLED(CONFIG_QCOM_MDT_LOADER) || !qcom_scm_is_available()) > >> - return -EPROBE_DEFER; > > > > !IS_ENABLED(CONFIG_QCOM_MDT_LOADER) is not a condition that can change > > at runtime, and returning -EPROBE_DEFER in that case seems erroneous > > to me. Instead, wouldn't it make more sense to make the driver depend > > on QCOM_MDT_LOADER? > > That was made on purpose, for more info git show b8f9bdc151e4a Ah, I see. Still, in the current form it seems like qcom_scm_is_available() is not resolved thanks to a compiler optimization. Wouldn't it be more explicit to do something like #if IS_ENABLED(CONFIG_QCOM_MDT_LOADER) if (!qcom_scm_is_available()) return -EPROBE_DEFER; #endif instead?
diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c index bb6add9..75b9785 100644 --- a/drivers/media/platform/qcom/venus/core.c +++ b/drivers/media/platform/qcom/venus/core.c @@ -84,7 +84,7 @@ static void venus_sys_error_handler(struct work_struct *work) pm_runtime_get_sync(core->dev); - ret |= venus_boot(core->dev, core->res->fwname); + ret |= venus_boot(core); ret |= hfi_core_resume(core, true); @@ -284,7 +284,7 @@ static int venus_probe(struct platform_device *pdev) if (ret < 0) goto err_runtime_disable; - ret = venus_boot(dev, core->res->fwname); + ret = venus_boot(core); if (ret) goto err_runtime_disable; diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c index a9d042e..34224eb 100644 --- a/drivers/media/platform/qcom/venus/firmware.c +++ b/drivers/media/platform/qcom/venus/firmware.c @@ -60,20 +60,18 @@ int venus_set_hw_state(struct venus_core *core, bool resume) return 0; } -int venus_boot(struct device *dev, const char *fwname) +static int venus_load_fw(struct venus_core *core, const char *fwname, + phys_addr_t *mem_phys, size_t *mem_size) { const struct firmware *mdt; struct device_node *node; - phys_addr_t mem_phys; + struct device *dev; struct resource r; ssize_t fw_size; - size_t mem_size; void *mem_va; int ret; - if (!IS_ENABLED(CONFIG_QCOM_MDT_LOADER) || !qcom_scm_is_available()) - return -EPROBE_DEFER; - + dev = core->dev; node = of_parse_phandle(dev->of_node, "memory-region", 0); if (!node) { dev_err(dev, "no memory-region specified\n"); @@ -84,16 +82,16 @@ int venus_boot(struct device *dev, const char *fwname) if (ret) return ret; - mem_phys = r.start; - mem_size = resource_size(&r); + *mem_phys = r.start; + *mem_size = resource_size(&r); - if (mem_size < VENUS_FW_MEM_SIZE) + if (*mem_size < VENUS_FW_MEM_SIZE) return -EINVAL; - mem_va = memremap(r.start, mem_size, MEMREMAP_WC); + mem_va = memremap(r.start, *mem_size, MEMREMAP_WC); if (!mem_va) { dev_err(dev, "unable to map memory region: %pa+%zx\n", - &r.start, mem_size); + &r.start, *mem_size); return -ENOMEM; } @@ -108,23 +106,40 @@ int venus_boot(struct device *dev, const char *fwname) goto err_unmap; } - ret = qcom_mdt_load(dev, mdt, fwname, VENUS_PAS_ID, mem_va, mem_phys, - mem_size, NULL); + if (core->no_tz) + ret = qcom_mdt_load_no_init(dev, mdt, fwname, VENUS_PAS_ID, + mem_va, *mem_phys, *mem_size, NULL); + else + ret = qcom_mdt_load(dev, mdt, fwname, VENUS_PAS_ID, + mem_va, *mem_phys, *mem_size, NULL); release_firmware(mdt); - if (ret) - goto err_unmap; - - ret = qcom_scm_pas_auth_and_reset(VENUS_PAS_ID); - if (ret) - goto err_unmap; - err_unmap: memunmap(mem_va); return ret; } +int venus_boot(struct venus_core *core) +{ + struct device *dev = core->dev; + phys_addr_t mem_phys; + size_t mem_size; + int ret; + + if (!IS_ENABLED(CONFIG_QCOM_MDT_LOADER) || + (!core->no_tz && !qcom_scm_is_available())) + return -EPROBE_DEFER; + + ret = venus_load_fw(core, core->res->fwname, &mem_phys, &mem_size); + if (ret) { + dev_err(dev, "fail to load video firmware\n"); + return -EINVAL; + } + + return qcom_scm_pas_auth_and_reset(VENUS_PAS_ID); +} + int venus_shutdown(struct device *dev) { return qcom_scm_pas_shutdown(VENUS_PAS_ID); diff --git a/drivers/media/platform/qcom/venus/firmware.h b/drivers/media/platform/qcom/venus/firmware.h index 397570c..1343747 100644 --- a/drivers/media/platform/qcom/venus/firmware.h +++ b/drivers/media/platform/qcom/venus/firmware.h @@ -16,7 +16,7 @@ struct device; -int venus_boot(struct device *dev, const char *fwname); +int venus_boot(struct venus_core *core); int venus_shutdown(struct device *dev); int venus_set_hw_state(struct venus_core *core, bool suspend);
Separate firmware loading part into a new function. Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org> --- drivers/media/platform/qcom/venus/core.c | 4 +- drivers/media/platform/qcom/venus/firmware.c | 55 ++++++++++++++++++---------- drivers/media/platform/qcom/venus/firmware.h | 2 +- 3 files changed, 38 insertions(+), 23 deletions(-)