diff mbox series

[03/10] clk: samsung: s3c2412: Use generic helper for handling suspend/resume

Message ID 20180829155046.29359-4-m.szyprowski@samsung.com (mailing list archive)
State Superseded, archived
Headers show
Series Cleanup suspend/resume code in Samsung clock drivers | expand

Commit Message

Marek Szyprowski Aug. 29, 2018, 3:50 p.m. UTC
Replace common suspend/resume handling code by generic helper.
No functional change.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/clk/samsung/clk-s3c2412.c | 43 ++-----------------------------
 1 file changed, 2 insertions(+), 41 deletions(-)

Comments

Chanwoo Choi Aug. 30, 2018, 1:17 a.m. UTC | #1
Hi Marek,

On 2018년 08월 30일 00:50, Marek Szyprowski wrote:
> Replace common suspend/resume handling code by generic helper.
> No functional change.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
>  drivers/clk/samsung/clk-s3c2412.c | 43 ++-----------------------------
>  1 file changed, 2 insertions(+), 41 deletions(-)

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>

(snip)
Krzysztof Kozlowski Aug. 30, 2018, 6:42 a.m. UTC | #2
On Wed, 29 Aug 2018 at 17:51, Marek Szyprowski <m.szyprowski@samsung.com> wrote:
>
> Replace common suspend/resume handling code by generic helper.
> No functional change.
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
>  drivers/clk/samsung/clk-s3c2412.c | 43 ++-----------------------------
>  1 file changed, 2 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/clk/samsung/clk-s3c2412.c b/drivers/clk/samsung/clk-s3c2412.c
> index 6bc94d3aff78..dd1159050a5a 100644
> --- a/drivers/clk/samsung/clk-s3c2412.c
> +++ b/drivers/clk/samsung/clk-s3c2412.c
> @@ -11,7 +11,6 @@
>  #include <linux/clk-provider.h>
>  #include <linux/of.h>
>  #include <linux/of_address.h>
> -#include <linux/syscore_ops.h>
>  #include <linux/reboot.h>
>
>  #include <dt-bindings/clock/s3c2412.h>
> @@ -29,9 +28,6 @@
>
>  static void __iomem *reg_base;
>
> -#ifdef CONFIG_PM_SLEEP
> -static struct samsung_clk_reg_dump *s3c2412_save;
> -
>  /*
>   * list of controller registers to be saved and restored during a
>   * suspend/resume cycle.
> @@ -45,42 +41,6 @@ static unsigned long s3c2412_clk_regs[] __initdata = {
>         CLKSRC,

Did you try building without PM_SLEEP? Now this will be included
always so you might have to mark it __maybe_unused.

Best regards,
Krzysztof

>  };
>
> -static int s3c2412_clk_suspend(void)
> -{
> -       samsung_clk_save(reg_base, s3c2412_save,
> -                               ARRAY_SIZE(s3c2412_clk_regs));
> -
> -       return 0;
> -}
> -
> -static void s3c2412_clk_resume(void)
> -{
> -       samsung_clk_restore(reg_base, s3c2412_save,
> -                               ARRAY_SIZE(s3c2412_clk_regs));
> -}
> -
> -static struct syscore_ops s3c2412_clk_syscore_ops = {
> -       .suspend = s3c2412_clk_suspend,
> -       .resume = s3c2412_clk_resume,
> -};
> -
> -static void __init s3c2412_clk_sleep_init(void)
> -{
> -       s3c2412_save = samsung_clk_alloc_reg_dump(s3c2412_clk_regs,
> -                                               ARRAY_SIZE(s3c2412_clk_regs));
> -       if (!s3c2412_save) {
> -               pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
> -                       __func__);
> -               return;
> -       }
> -
> -       register_syscore_ops(&s3c2412_clk_syscore_ops);
> -       return;
> -}
> -#else
> -static void __init s3c2412_clk_sleep_init(void) {}
> -#endif
> -
>  static struct clk_div_table divxti_d[] = {
>         { .val = 0, .div = 1 },
>         { .val = 1, .div = 2 },
> @@ -278,7 +238,8 @@ void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
>         samsung_clk_register_alias(ctx, s3c2412_aliases,
>                                    ARRAY_SIZE(s3c2412_aliases));
>
> -       s3c2412_clk_sleep_init();
> +       samsung_clk_sleep_init(reg_base, s3c2412_clk_regs,
> +                              ARRAY_SIZE(s3c2412_clk_regs));
>
>         samsung_clk_of_add_provider(np, ctx);
>
> --
> 2.17.1
>
Marek Szyprowski Aug. 30, 2018, 12:50 p.m. UTC | #3
Hi Krzysztof,

On 2018-08-30 08:42, Krzysztof Kozlowski wrote:
> On Wed, 29 Aug 2018 at 17:51, Marek Szyprowski <m.szyprowski@samsung.com> wrote:
>> Replace common suspend/resume handling code by generic helper.
>> No functional change.
>>
>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
>> ---
>>   drivers/clk/samsung/clk-s3c2412.c | 43 ++-----------------------------
>>   1 file changed, 2 insertions(+), 41 deletions(-)
>>
>> diff --git a/drivers/clk/samsung/clk-s3c2412.c b/drivers/clk/samsung/clk-s3c2412.c
>> index 6bc94d3aff78..dd1159050a5a 100644
>> --- a/drivers/clk/samsung/clk-s3c2412.c
>> +++ b/drivers/clk/samsung/clk-s3c2412.c
>> @@ -11,7 +11,6 @@
>>   #include <linux/clk-provider.h>
>>   #include <linux/of.h>
>>   #include <linux/of_address.h>
>> -#include <linux/syscore_ops.h>
>>   #include <linux/reboot.h>
>>
>>   #include <dt-bindings/clock/s3c2412.h>
>> @@ -29,9 +28,6 @@
>>
>>   static void __iomem *reg_base;
>>
>> -#ifdef CONFIG_PM_SLEEP
>> -static struct samsung_clk_reg_dump *s3c2412_save;
>> -
>>   /*
>>    * list of controller registers to be saved and restored during a
>>    * suspend/resume cycle.
>> @@ -45,42 +41,6 @@ static unsigned long s3c2412_clk_regs[] __initdata = {
>>          CLKSRC,
> Did you try building without PM_SLEEP? Now this will be included
> always so you might have to mark it __maybe_unused.

Nope, there is no such need, because *_regs arrays are passed to a
samsung_clk_sleep_init() noop function not a noop marco.

 > ...

Best regards
Krzysztof Kozlowski Aug. 30, 2018, 1:10 p.m. UTC | #4
On Thu, 30 Aug 2018 at 14:50, Marek Szyprowski <m.szyprowski@samsung.com> wrote:
>
> Hi Krzysztof,
>
> On 2018-08-30 08:42, Krzysztof Kozlowski wrote:
> > On Wed, 29 Aug 2018 at 17:51, Marek Szyprowski <m.szyprowski@samsung.com> wrote:
> >> Replace common suspend/resume handling code by generic helper.
> >> No functional change.
> >>
> >> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> >> ---
> >>   drivers/clk/samsung/clk-s3c2412.c | 43 ++-----------------------------
> >>   1 file changed, 2 insertions(+), 41 deletions(-)
> >>
> >> diff --git a/drivers/clk/samsung/clk-s3c2412.c b/drivers/clk/samsung/clk-s3c2412.c
> >> index 6bc94d3aff78..dd1159050a5a 100644
> >> --- a/drivers/clk/samsung/clk-s3c2412.c
> >> +++ b/drivers/clk/samsung/clk-s3c2412.c
> >> @@ -11,7 +11,6 @@
> >>   #include <linux/clk-provider.h>
> >>   #include <linux/of.h>
> >>   #include <linux/of_address.h>
> >> -#include <linux/syscore_ops.h>
> >>   #include <linux/reboot.h>
> >>
> >>   #include <dt-bindings/clock/s3c2412.h>
> >> @@ -29,9 +28,6 @@
> >>
> >>   static void __iomem *reg_base;
> >>
> >> -#ifdef CONFIG_PM_SLEEP
> >> -static struct samsung_clk_reg_dump *s3c2412_save;
> >> -
> >>   /*
> >>    * list of controller registers to be saved and restored during a
> >>    * suspend/resume cycle.
> >> @@ -45,42 +41,6 @@ static unsigned long s3c2412_clk_regs[] __initdata = {
> >>          CLKSRC,
> > Did you try building without PM_SLEEP? Now this will be included
> > always so you might have to mark it __maybe_unused.
>
> Nope, there is no such need, because *_regs arrays are passed to a
> samsung_clk_sleep_init() noop function not a noop marco.

Right.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/drivers/clk/samsung/clk-s3c2412.c b/drivers/clk/samsung/clk-s3c2412.c
index 6bc94d3aff78..dd1159050a5a 100644
--- a/drivers/clk/samsung/clk-s3c2412.c
+++ b/drivers/clk/samsung/clk-s3c2412.c
@@ -11,7 +11,6 @@ 
 #include <linux/clk-provider.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/syscore_ops.h>
 #include <linux/reboot.h>
 
 #include <dt-bindings/clock/s3c2412.h>
@@ -29,9 +28,6 @@ 
 
 static void __iomem *reg_base;
 
-#ifdef CONFIG_PM_SLEEP
-static struct samsung_clk_reg_dump *s3c2412_save;
-
 /*
  * list of controller registers to be saved and restored during a
  * suspend/resume cycle.
@@ -45,42 +41,6 @@  static unsigned long s3c2412_clk_regs[] __initdata = {
 	CLKSRC,
 };
 
-static int s3c2412_clk_suspend(void)
-{
-	samsung_clk_save(reg_base, s3c2412_save,
-				ARRAY_SIZE(s3c2412_clk_regs));
-
-	return 0;
-}
-
-static void s3c2412_clk_resume(void)
-{
-	samsung_clk_restore(reg_base, s3c2412_save,
-				ARRAY_SIZE(s3c2412_clk_regs));
-}
-
-static struct syscore_ops s3c2412_clk_syscore_ops = {
-	.suspend = s3c2412_clk_suspend,
-	.resume = s3c2412_clk_resume,
-};
-
-static void __init s3c2412_clk_sleep_init(void)
-{
-	s3c2412_save = samsung_clk_alloc_reg_dump(s3c2412_clk_regs,
-						ARRAY_SIZE(s3c2412_clk_regs));
-	if (!s3c2412_save) {
-		pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
-			__func__);
-		return;
-	}
-
-	register_syscore_ops(&s3c2412_clk_syscore_ops);
-	return;
-}
-#else
-static void __init s3c2412_clk_sleep_init(void) {}
-#endif
-
 static struct clk_div_table divxti_d[] = {
 	{ .val = 0, .div = 1 },
 	{ .val = 1, .div = 2 },
@@ -278,7 +238,8 @@  void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
 	samsung_clk_register_alias(ctx, s3c2412_aliases,
 				   ARRAY_SIZE(s3c2412_aliases));
 
-	s3c2412_clk_sleep_init();
+	samsung_clk_sleep_init(reg_base, s3c2412_clk_regs,
+			       ARRAY_SIZE(s3c2412_clk_regs));
 
 	samsung_clk_of_add_provider(np, ctx);