| Message ID | 20180829160013.9447-3-m.szyprowski@samsung.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | Prepare Exynos5433 clocks driver for system suspend/resume | expand |
Hi Marek, On 2018년 08월 30일 01:00, Marek Szyprowski wrote: > Before entering system suspend, one has to ensure that all TOP ACLK clocks > are enabled, so do this by storing 0x67ECFFED value to ENABLE_ACLK_TOP > register. In case of PERIC CMU, keep all UART PCLK and SCLK clocks as well > as all GPIO PCLK clocks enabled. > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > drivers/clk/samsung/clk-exynos5433.c | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > > diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c > index 426980514e67..d34e645aba49 100644 > --- a/drivers/clk/samsung/clk-exynos5433.c > +++ b/drivers/clk/samsung/clk-exynos5433.c > @@ -177,6 +177,12 @@ static const unsigned long top_clk_regs[] __initconst = { > ENABLE_CMU_TOP_DIV_STAT, > }; > > +static const struct samsung_clk_reg_dump top_suspend_regs[] = { > + { ENABLE_ACLK_TOP, 0x67ECFFED }, /* all clocks enabled */ > + { ISP_PLL_CON0, 0x85CC0502 }, /* reset value + ENABLE bit */ > + { AUD_PLL_CON0, 0x84830202 }, /* reset value + ENABLE bit */ When you sent the patch[1], you used the 'small letter' instead of capital letter. Even if it's trivial, you better to keep one style either small or capital letter. [1] commit 523d3de41f02 ("clk: samsung: exynos5433: Add support for runtime PM") > +}; > + > /* list of all parent clock list */ > PNAME(mout_aud_pll_p) = { "oscclk", "fout_aud_pll", }; > PNAME(mout_isp_pll_p) = { "oscclk", "fout_isp_pll", }; > @@ -792,6 +798,8 @@ static const struct samsung_cmu_info top_cmu_info __initconst = { > .nr_clk_ids = TOP_NR_CLK, > .clk_regs = top_clk_regs, > .nr_clk_regs = ARRAY_SIZE(top_clk_regs), > + .suspend_regs = top_suspend_regs, > + .nr_suspend_regs = ARRAY_SIZE(top_suspend_regs), > }; > > static void __init exynos5433_cmu_top_init(struct device_node *np) > @@ -822,6 +830,11 @@ static const unsigned long cpif_clk_regs[] __initconst = { > ENABLE_SCLK_CPIF, > }; > > +static const struct samsung_clk_reg_dump cpif_suspend_regs[] = { > + { ENABLE_SCLK_CPIF, 0x3FF }, /* all clocks enabled */ > + { MPHY_PLL_CON0, 0x81C70601 }, /* reset value + ENABLE bit */ > +}; > + > /* list of all parent clock list */ > PNAME(mout_mphy_pll_p) = { "oscclk", "fout_mphy_pll", }; > > @@ -862,6 +875,8 @@ static const struct samsung_cmu_info cpif_cmu_info __initconst = { > .nr_clk_ids = CPIF_NR_CLK, > .clk_regs = cpif_clk_regs, > .nr_clk_regs = ARRAY_SIZE(cpif_clk_regs), > + .suspend_regs = cpif_suspend_regs, > + .nr_suspend_regs = ARRAY_SIZE(cpif_suspend_regs), > }; > > static void __init exynos5433_cmu_cpif_init(struct device_node *np) > @@ -1547,6 +1562,11 @@ static const unsigned long peric_clk_regs[] __initconst = { > ENABLE_IP_PERIC2, > }; > > +static const struct samsung_clk_reg_dump peric_suspend_regs[] = { > + { ENABLE_PCLK_PERIC0, 0xE00FF000 }, > + { ENABLE_SCLK_PERIC, 0x7 }, How about adding the comment of meaning of hex value as top/cpif_suspend_regs? > +}; > + > static const struct samsung_div_clock peric_div_clks[] __initconst = { > /* DIV_PERIC */ > DIV(CLK_DIV_SCLK_SCI, "div_sclk_sci", "oscclk", DIV_PERIC, 4, 4), > @@ -1705,6 +1725,8 @@ static const struct samsung_cmu_info peric_cmu_info __initconst = { > .nr_clk_ids = PERIC_NR_CLK, > .clk_regs = peric_clk_regs, > .nr_clk_regs = ARRAY_SIZE(peric_clk_regs), > + .suspend_regs = peric_suspend_regs, > + .nr_suspend_regs = ARRAY_SIZE(peric_suspend_regs), > }; > > static void __init exynos5433_cmu_peric_init(struct device_node *np) >
On Wed, 29 Aug 2018 at 18:00, Marek Szyprowski <m.szyprowski@samsung.com> wrote: > > Before entering system suspend, one has to ensure that all TOP ACLK clocks > are enabled, so do this by storing 0x67ECFFED value to ENABLE_ACLK_TOP > register. In case of PERIC CMU, keep all UART PCLK and SCLK clocks as well > as all GPIO PCLK clocks enabled. > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > drivers/clk/samsung/clk-exynos5433.c | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > > diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c > index 426980514e67..d34e645aba49 100644 > --- a/drivers/clk/samsung/clk-exynos5433.c > +++ b/drivers/clk/samsung/clk-exynos5433.c > @@ -177,6 +177,12 @@ static const unsigned long top_clk_regs[] __initconst = { > ENABLE_CMU_TOP_DIV_STAT, > }; > > +static const struct samsung_clk_reg_dump top_suspend_regs[] = { > + { ENABLE_ACLK_TOP, 0x67ECFFED }, /* all clocks enabled */ > + { ISP_PLL_CON0, 0x85CC0502 }, /* reset value + ENABLE bit */ > + { AUD_PLL_CON0, 0x84830202 }, /* reset value + ENABLE bit */ > +}; > + > /* list of all parent clock list */ > PNAME(mout_aud_pll_p) = { "oscclk", "fout_aud_pll", }; > PNAME(mout_isp_pll_p) = { "oscclk", "fout_isp_pll", }; > @@ -792,6 +798,8 @@ static const struct samsung_cmu_info top_cmu_info __initconst = { > .nr_clk_ids = TOP_NR_CLK, > .clk_regs = top_clk_regs, > .nr_clk_regs = ARRAY_SIZE(top_clk_regs), > + .suspend_regs = top_suspend_regs, > + .nr_suspend_regs = ARRAY_SIZE(top_suspend_regs), > }; > > static void __init exynos5433_cmu_top_init(struct device_node *np) > @@ -822,6 +830,11 @@ static const unsigned long cpif_clk_regs[] __initconst = { > ENABLE_SCLK_CPIF, > }; > > +static const struct samsung_clk_reg_dump cpif_suspend_regs[] = { > + { ENABLE_SCLK_CPIF, 0x3FF }, /* all clocks enabled */ > + { MPHY_PLL_CON0, 0x81C70601 }, /* reset value + ENABLE bit */ > +}; > + > /* list of all parent clock list */ > PNAME(mout_mphy_pll_p) = { "oscclk", "fout_mphy_pll", }; > > @@ -862,6 +875,8 @@ static const struct samsung_cmu_info cpif_cmu_info __initconst = { > .nr_clk_ids = CPIF_NR_CLK, > .clk_regs = cpif_clk_regs, > .nr_clk_regs = ARRAY_SIZE(cpif_clk_regs), > + .suspend_regs = cpif_suspend_regs, > + .nr_suspend_regs = ARRAY_SIZE(cpif_suspend_regs), > }; > > static void __init exynos5433_cmu_cpif_init(struct device_node *np) > @@ -1547,6 +1562,11 @@ static const unsigned long peric_clk_regs[] __initconst = { > ENABLE_IP_PERIC2, > }; > > +static const struct samsung_clk_reg_dump peric_suspend_regs[] = { > + { ENABLE_PCLK_PERIC0, 0xE00FF000 }, > + { ENABLE_SCLK_PERIC, 0x7 }, It would be nice to see comment about values here as well. With that change: Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Best regards, Krzysztof
diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c index 426980514e67..d34e645aba49 100644 --- a/drivers/clk/samsung/clk-exynos5433.c +++ b/drivers/clk/samsung/clk-exynos5433.c @@ -177,6 +177,12 @@ static const unsigned long top_clk_regs[] __initconst = { ENABLE_CMU_TOP_DIV_STAT, }; +static const struct samsung_clk_reg_dump top_suspend_regs[] = { + { ENABLE_ACLK_TOP, 0x67ECFFED }, /* all clocks enabled */ + { ISP_PLL_CON0, 0x85CC0502 }, /* reset value + ENABLE bit */ + { AUD_PLL_CON0, 0x84830202 }, /* reset value + ENABLE bit */ +}; + /* list of all parent clock list */ PNAME(mout_aud_pll_p) = { "oscclk", "fout_aud_pll", }; PNAME(mout_isp_pll_p) = { "oscclk", "fout_isp_pll", }; @@ -792,6 +798,8 @@ static const struct samsung_cmu_info top_cmu_info __initconst = { .nr_clk_ids = TOP_NR_CLK, .clk_regs = top_clk_regs, .nr_clk_regs = ARRAY_SIZE(top_clk_regs), + .suspend_regs = top_suspend_regs, + .nr_suspend_regs = ARRAY_SIZE(top_suspend_regs), }; static void __init exynos5433_cmu_top_init(struct device_node *np) @@ -822,6 +830,11 @@ static const unsigned long cpif_clk_regs[] __initconst = { ENABLE_SCLK_CPIF, }; +static const struct samsung_clk_reg_dump cpif_suspend_regs[] = { + { ENABLE_SCLK_CPIF, 0x3FF }, /* all clocks enabled */ + { MPHY_PLL_CON0, 0x81C70601 }, /* reset value + ENABLE bit */ +}; + /* list of all parent clock list */ PNAME(mout_mphy_pll_p) = { "oscclk", "fout_mphy_pll", }; @@ -862,6 +875,8 @@ static const struct samsung_cmu_info cpif_cmu_info __initconst = { .nr_clk_ids = CPIF_NR_CLK, .clk_regs = cpif_clk_regs, .nr_clk_regs = ARRAY_SIZE(cpif_clk_regs), + .suspend_regs = cpif_suspend_regs, + .nr_suspend_regs = ARRAY_SIZE(cpif_suspend_regs), }; static void __init exynos5433_cmu_cpif_init(struct device_node *np) @@ -1547,6 +1562,11 @@ static const unsigned long peric_clk_regs[] __initconst = { ENABLE_IP_PERIC2, }; +static const struct samsung_clk_reg_dump peric_suspend_regs[] = { + { ENABLE_PCLK_PERIC0, 0xE00FF000 }, + { ENABLE_SCLK_PERIC, 0x7 }, +}; + static const struct samsung_div_clock peric_div_clks[] __initconst = { /* DIV_PERIC */ DIV(CLK_DIV_SCLK_SCI, "div_sclk_sci", "oscclk", DIV_PERIC, 4, 4), @@ -1705,6 +1725,8 @@ static const struct samsung_cmu_info peric_cmu_info __initconst = { .nr_clk_ids = PERIC_NR_CLK, .clk_regs = peric_clk_regs, .nr_clk_regs = ARRAY_SIZE(peric_clk_regs), + .suspend_regs = peric_suspend_regs, + .nr_suspend_regs = ARRAY_SIZE(peric_suspend_regs), }; static void __init exynos5433_cmu_peric_init(struct device_node *np)
Before entering system suspend, one has to ensure that all TOP ACLK clocks are enabled, so do this by storing 0x67ECFFED value to ENABLE_ACLK_TOP register. In case of PERIC CMU, keep all UART PCLK and SCLK clocks as well as all GPIO PCLK clocks enabled. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- drivers/clk/samsung/clk-exynos5433.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)