| Message ID | 1535778675-32170-3-git-send-email-wei@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | tests: Add migration test for aarch64 | expand |
Wei Huang <wei@redhat.com> wrote: > Recently a new configure option, CROSS_CC_GUEST, was added to > $(TARGET)-softmmu/config-target.mak to support TCG-related tests. This > patch tries to leverage this option to support cross compilation when the > migration boot block file is being re-generated: > > * The x86_64 related files are moved to a new sub-dir (named ./x86_64). > * A new top-layer Makefile is created in tests/migration/ directory. > This Makefile searches and parses CROSS_CC_GUEST to generate CROSS_PREFIX. > The CROSS_PREFIX, if available, is then passed to migration/$ARCH/Makefile. > > Signed-off-by: Wei Huang <wei@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com>
On Sat, Sep 01, 2018 at 01:11:13AM -0400, Wei Huang wrote: > Recently a new configure option, CROSS_CC_GUEST, was added to > $(TARGET)-softmmu/config-target.mak to support TCG-related tests. This > patch tries to leverage this option to support cross compilation when the > migration boot block file is being re-generated: > > * The x86_64 related files are moved to a new sub-dir (named ./x86_64). > * A new top-layer Makefile is created in tests/migration/ directory. > This Makefile searches and parses CROSS_CC_GUEST to generate CROSS_PREFIX. > The CROSS_PREFIX, if available, is then passed to migration/$ARCH/Makefile. > > Signed-off-by: Wei Huang <wei@redhat.com> > --- > tests/migration-test.c | 2 +- > tests/migration/Makefile | 43 +++++++++++++----------- > tests/migration/x86_64/Makefile | 22 ++++++++++++ > tests/migration/{ => x86_64}/x86-a-b-bootblock.S | 0 > tests/migration/{ => x86_64}/x86-a-b-bootblock.h | 8 ++--- > 5 files changed, 50 insertions(+), 25 deletions(-) > create mode 100644 tests/migration/x86_64/Makefile > rename tests/migration/{ => x86_64}/x86-a-b-bootblock.S (100%) > rename tests/migration/{ => x86_64}/x86-a-b-bootblock.h (93%) > > diff --git a/tests/migration-test.c b/tests/migration-test.c > index 0e687b7..c4d79e9 100644 > --- a/tests/migration-test.c > +++ b/tests/migration-test.c > @@ -83,7 +83,7 @@ static const char *tmpfs; > /* A simple PC boot sector that modifies memory (1-100MB) quickly > * outputting a 'B' every so often if it's still running. > */ > -#include "tests/migration/x86-a-b-bootblock.h" > +#include "tests/migration/x86_64/x86-a-b-bootblock.h" Is x86-a-b-bootblock.h specific to x86_64, or both i386 and x86_64? I think we want the dir name to be i386 if it's the later. Also, we could drop the 'x86-' prefix from the filename, now that the directory identifies the arch. > > static void init_bootfile_x86(const char *bootpath) > { > diff --git a/tests/migration/Makefile b/tests/migration/Makefile > index 5d5fa07..1de480e 100644 > --- a/tests/migration/Makefile > +++ b/tests/migration/Makefile > @@ -1,31 +1,34 @@ > -# To specify cross compiler prefix, use CROSS_PREFIX= > -# > make CROSS_PREFIX=x86_64-linux-gnu- > +# > +# Copyright (c) 2018 Red Hat, Inc. and/or its affiliates > +# > +# This work is licensed under the terms of the GNU GPL, version 2 or later. > +# See the COPYING file in the top-level directory. > +# > + > +TARGET_LIST = x86_64 > + > +SRC_PATH = ../.. > > override define __note > -/* This file is automatically generated from > - * tests/migration/x86-a-b-bootblock.s, edit that and then run > - * tests/migration/rebuild-x86-bootblock.sh to update, > - * and then remember to send both in your patch submission. > +/* This file is automatically generated from the assembly file in > + * tests/migration/$@, edit that and then run "make all" nit: /, edit that/. Edit that file/ > + * inside tests/migration to update, and then remember to send both > + * in your patch submission. nit: ^ the header and the assembler differences > */ > endef > export __note > > -.PHONY: all clean > -all: x86-a-b-bootblock.h > - > -x86-a-b-bootblock.h: x86.bootsect > - echo "$$__note" > header.tmp > - xxd -i $< | sed -e 's/.*int.*//' >> header.tmp > - mv header.tmp $@ > +parse-cross-prefix = $(subst gcc,,$(patsubst cc,gcc,$(patsubst CROSS_CC_GUEST="%",%,$(shell grep "CROSS_CC_GUEST=" $(SRC_PATH)/$(1)-softmmu/config-target.mak)))) > +gen-cross-prefix = $(patsubst %-,CROSS_PREFIX=%-,$(call parse-cross-prefix,$(1))) > > -x86.bootsect: x86.boot > - dd if=$< of=$@ bs=256 count=2 skip=124 > +.PHONY: all $(TARGET_LIST) > > -x86.boot: x86.o > - $(CROSS_PREFIX)objcopy -O binary $< $@ > +all: $(TARGET_LIST) > > -x86.o: x86-a-b-bootblock.S > - $(CROSS_PREFIX)gcc -m32 -march=i486 -c $< -o $@ > +$(TARGET_LIST): > + $(MAKE) -C $@ $(call gen-cross-prefix,$@) > > clean: > - @rm -rf *.boot *.o *.bootsect > + for target in $(TARGET_LIST); do \ > + $(MAKE) -C $$target clean; \ > + done The above seems overly complicated. Does the following work? $(TARGET_LIST): CROSS_PREFIX=$(CROSS_CC_GUEST) $(TARGET_LIST): $(MAKE) -C $@ > diff --git a/tests/migration/x86_64/Makefile b/tests/migration/x86_64/Makefile > new file mode 100644 > index 0000000..6dc849f > --- /dev/null > +++ b/tests/migration/x86_64/Makefile > @@ -0,0 +1,22 @@ > +# To specify cross compiler prefix, use CROSS_PREFIX= > +# > make CROSS_PREFIX=x86_64-linux-gnu- > + > +.PHONY: all clean > +all: x86-a-b-bootblock.h > + > +x86-a-b-bootblock.h: x86.bootsect > + echo "$$__note" > header.tmp > + xxd -i $< | sed -e 's/.*int.*//' >> header.tmp > + mv header.tmp $@ > + > +x86.bootsect: x86.boot > + dd if=$< of=$@ bs=256 count=2 skip=124 > + > +x86.boot: x86.o > + $(CROSS_PREFIX)objcopy -O binary $< $@ > + > +x86.o: x86-a-b-bootblock.S > + $(CROSS_PREFIX)gcc -m32 -march=i486 -c $< -o $@ > + > +clean: > + @rm -rf *.boot *.o *.bootsect > diff --git a/tests/migration/x86-a-b-bootblock.S b/tests/migration/x86_64/x86-a-b-bootblock.S > similarity index 100% > rename from tests/migration/x86-a-b-bootblock.S > rename to tests/migration/x86_64/x86-a-b-bootblock.S > diff --git a/tests/migration/x86-a-b-bootblock.h b/tests/migration/x86_64/x86-a-b-bootblock.h > similarity index 93% > rename from tests/migration/x86-a-b-bootblock.h > rename to tests/migration/x86_64/x86-a-b-bootblock.h > index 78a151f..73670ef 100644 > --- a/tests/migration/x86-a-b-bootblock.h > +++ b/tests/migration/x86_64/x86-a-b-bootblock.h > @@ -1,7 +1,7 @@ > -/* This file is automatically generated from > - * tests/migration/x86-a-b-bootblock.s, edit that and then run > - * tests/migration/rebuild-x86-bootblock.sh to update, > - * and then remember to send both in your patch submission. > +/* This file is automatically generated from the assembly file in > + * tests/migration/x86_64, edit that and then run "make all" > + * inside tests/migration to update, and then remember to send both > + * in your patch submission. > */ > unsigned char x86_bootsect[] = { > 0xfa, 0x0f, 0x01, 0x16, 0x74, 0x7c, 0x66, 0xb8, 0x01, 0x00, 0x00, 0x00, > -- > 1.8.3.1 > > Thanks, drew
----- Original Message ----- > From: "Andrew Jones" <drjones@redhat.com> > To: "Wei Huang" <wei@redhat.com> > Cc: qemu-devel@nongnu.org, lvivier@redhat.com, "peter maydell" <peter.maydell@linaro.org>, quintela@redhat.com, > dgilbert@redhat.com > Sent: Monday, September 3, 2018 6:26:39 AM > Subject: Re: [Qemu-devel] [PATCH V8 2/4] tests/migration: Support cross compilation in generating boot header file > > On Sat, Sep 01, 2018 at 01:11:13AM -0400, Wei Huang wrote: > > Recently a new configure option, CROSS_CC_GUEST, was added to > > $(TARGET)-softmmu/config-target.mak to support TCG-related tests. This > > patch tries to leverage this option to support cross compilation when the > > migration boot block file is being re-generated: > > > > * The x86_64 related files are moved to a new sub-dir (named ./x86_64). > > * A new top-layer Makefile is created in tests/migration/ directory. > > This Makefile searches and parses CROSS_CC_GUEST to generate > > CROSS_PREFIX. > > The CROSS_PREFIX, if available, is then passed to > > migration/$ARCH/Makefile. > > > > Signed-off-by: Wei Huang <wei@redhat.com> > > --- > > tests/migration-test.c | 2 +- > > tests/migration/Makefile | 43 > > +++++++++++++----------- > > tests/migration/x86_64/Makefile | 22 ++++++++++++ > > tests/migration/{ => x86_64}/x86-a-b-bootblock.S | 0 > > tests/migration/{ => x86_64}/x86-a-b-bootblock.h | 8 ++--- > > 5 files changed, 50 insertions(+), 25 deletions(-) > > create mode 100644 tests/migration/x86_64/Makefile > > rename tests/migration/{ => x86_64}/x86-a-b-bootblock.S (100%) > > rename tests/migration/{ => x86_64}/x86-a-b-bootblock.h (93%) > > > > diff --git a/tests/migration-test.c b/tests/migration-test.c > > index 0e687b7..c4d79e9 100644 > > --- a/tests/migration-test.c > > +++ b/tests/migration-test.c > > @@ -83,7 +83,7 @@ static const char *tmpfs; > > /* A simple PC boot sector that modifies memory (1-100MB) quickly > > * outputting a 'B' every so often if it's still running. > > */ > > -#include "tests/migration/x86-a-b-bootblock.h" > > +#include "tests/migration/x86_64/x86-a-b-bootblock.h" > > Is x86-a-b-bootblock.h specific to x86_64, or both i386 and x86_64? > I think we want the dir name to be i386 if it's the later. Also, > we could drop the 'x86-' prefix from the filename, now that the > directory identifies the arch. Well, I can try it. But this will make the Makefile more complicated as we have to detect x86_64 compiler for i386 binary (most distros only ship x86_64 cross compiler). > > > > > static void init_bootfile_x86(const char *bootpath) > > { > > diff --git a/tests/migration/Makefile b/tests/migration/Makefile > > index 5d5fa07..1de480e 100644 > > --- a/tests/migration/Makefile > > +++ b/tests/migration/Makefile > > @@ -1,31 +1,34 @@ > > -# To specify cross compiler prefix, use CROSS_PREFIX= > > -# > make CROSS_PREFIX=x86_64-linux-gnu- > > +# > > +# Copyright (c) 2018 Red Hat, Inc. and/or its affiliates > > +# > > +# This work is licensed under the terms of the GNU GPL, version 2 or > > later. > > +# See the COPYING file in the top-level directory. > > +# > > + > > +TARGET_LIST = x86_64 > > + > > +SRC_PATH = ../.. > > > > override define __note > > -/* This file is automatically generated from > > - * tests/migration/x86-a-b-bootblock.s, edit that and then run > > - * tests/migration/rebuild-x86-bootblock.sh to update, > > - * and then remember to send both in your patch submission. > > +/* This file is automatically generated from the assembly file in > > + * tests/migration/$@, edit that and then run "make all" > > nit: /, edit that/. Edit that file/ > > > + * inside tests/migration to update, and then remember to send both > > + * in your patch submission. > nit: ^ the header and the assembler differences > > > */ > > endef > > export __note > > > > -.PHONY: all clean > > -all: x86-a-b-bootblock.h > > - > > -x86-a-b-bootblock.h: x86.bootsect > > - echo "$$__note" > header.tmp > > - xxd -i $< | sed -e 's/.*int.*//' >> header.tmp > > - mv header.tmp $@ > > +parse-cross-prefix = $(subst gcc,,$(patsubst cc,gcc,$(patsubst > > CROSS_CC_GUEST="%",%,$(shell grep "CROSS_CC_GUEST=" > > $(SRC_PATH)/$(1)-softmmu/config-target.mak)))) > > +gen-cross-prefix = $(patsubst %-,CROSS_PREFIX=%-,$(call > > parse-cross-prefix,$(1))) > > > > -x86.bootsect: x86.boot > > - dd if=$< of=$@ bs=256 count=2 skip=124 > > +.PHONY: all $(TARGET_LIST) > > > > -x86.boot: x86.o > > - $(CROSS_PREFIX)objcopy -O binary $< $@ > > +all: $(TARGET_LIST) > > > > -x86.o: x86-a-b-bootblock.S > > - $(CROSS_PREFIX)gcc -m32 -march=i486 -c $< -o $@ > > +$(TARGET_LIST): > > + $(MAKE) -C $@ $(call gen-cross-prefix,$@) > > > > clean: > > - @rm -rf *.boot *.o *.bootsect > > + for target in $(TARGET_LIST); do \ > > + $(MAKE) -C $$target clean; \ > > + done > > The above seems overly complicated. Does the following work? > > $(TARGET_LIST): CROSS_PREFIX=$(CROSS_CC_GUEST) > $(TARGET_LIST): > $(MAKE) -C $@ No, it doen't work for different reasons. First, to have CROSS_CC_GUEST defined, we normally would use "-include" to include config-target.mak file. But the end result is, the CROSS_CC_GUEST only has the same definition for both architectures (due to make command's multi-iteration processing and include is processed first). Secondly, CROSS_CC_GUEST needs to be polished because it can be: i) not defined; ii) "cc" without prefix; or iii) used-define value. We can't use it directly. > > > > diff --git a/tests/migration/x86_64/Makefile > > b/tests/migration/x86_64/Makefile > > new file mode 100644 > > index 0000000..6dc849f > > --- /dev/null > > +++ b/tests/migration/x86_64/Makefile > > @@ -0,0 +1,22 @@ > > +# To specify cross compiler prefix, use CROSS_PREFIX= > > +# > make CROSS_PREFIX=x86_64-linux-gnu- > > + > > +.PHONY: all clean > > +all: x86-a-b-bootblock.h > > + > > +x86-a-b-bootblock.h: x86.bootsect > > + echo "$$__note" > header.tmp > > + xxd -i $< | sed -e 's/.*int.*//' >> header.tmp > > + mv header.tmp $@ > > + > > +x86.bootsect: x86.boot > > + dd if=$< of=$@ bs=256 count=2 skip=124 > > + > > +x86.boot: x86.o > > + $(CROSS_PREFIX)objcopy -O binary $< $@ > > + > > +x86.o: x86-a-b-bootblock.S > > + $(CROSS_PREFIX)gcc -m32 -march=i486 -c $< -o $@ > > + > > +clean: > > + @rm -rf *.boot *.o *.bootsect > > diff --git a/tests/migration/x86-a-b-bootblock.S > > b/tests/migration/x86_64/x86-a-b-bootblock.S > > similarity index 100% > > rename from tests/migration/x86-a-b-bootblock.S > > rename to tests/migration/x86_64/x86-a-b-bootblock.S > > diff --git a/tests/migration/x86-a-b-bootblock.h > > b/tests/migration/x86_64/x86-a-b-bootblock.h > > similarity index 93% > > rename from tests/migration/x86-a-b-bootblock.h > > rename to tests/migration/x86_64/x86-a-b-bootblock.h > > index 78a151f..73670ef 100644 > > --- a/tests/migration/x86-a-b-bootblock.h > > +++ b/tests/migration/x86_64/x86-a-b-bootblock.h > > @@ -1,7 +1,7 @@ > > -/* This file is automatically generated from > > - * tests/migration/x86-a-b-bootblock.s, edit that and then run > > - * tests/migration/rebuild-x86-bootblock.sh to update, > > - * and then remember to send both in your patch submission. > > +/* This file is automatically generated from the assembly file in > > + * tests/migration/x86_64, edit that and then run "make all" > > + * inside tests/migration to update, and then remember to send both > > + * in your patch submission. > > */ > > unsigned char x86_bootsect[] = { > > 0xfa, 0x0f, 0x01, 0x16, 0x74, 0x7c, 0x66, 0xb8, 0x01, 0x00, 0x00, 0x00, > > -- > > 1.8.3.1 > > > > > > Thanks, > drew >
On Tue, Sep 04, 2018 at 01:04:31PM -0400, Wei Huang wrote: > > > +parse-cross-prefix = $(subst gcc,,$(patsubst cc,gcc,$(patsubst > > > CROSS_CC_GUEST="%",%,$(shell grep "CROSS_CC_GUEST=" > > > $(SRC_PATH)/$(1)-softmmu/config-target.mak)))) > > > +gen-cross-prefix = $(patsubst %-,CROSS_PREFIX=%-,$(call > > > parse-cross-prefix,$(1))) > > > > > > -x86.bootsect: x86.boot > > > - dd if=$< of=$@ bs=256 count=2 skip=124 > > > +.PHONY: all $(TARGET_LIST) > > > > > > -x86.boot: x86.o > > > - $(CROSS_PREFIX)objcopy -O binary $< $@ > > > +all: $(TARGET_LIST) > > > > > > -x86.o: x86-a-b-bootblock.S > > > - $(CROSS_PREFIX)gcc -m32 -march=i486 -c $< -o $@ > > > +$(TARGET_LIST): > > > + $(MAKE) -C $@ $(call gen-cross-prefix,$@) > > > > > > clean: > > > - @rm -rf *.boot *.o *.bootsect > > > + for target in $(TARGET_LIST); do \ > > > + $(MAKE) -C $$target clean; \ > > > + done > > > > The above seems overly complicated. Does the following work? > > > > $(TARGET_LIST): CROSS_PREFIX=$(CROSS_CC_GUEST) > > $(TARGET_LIST): > > $(MAKE) -C $@ > > No, it doen't work for different reasons. > > First, to have CROSS_CC_GUEST defined, we normally would use "-include" to include config-target.mak file. But the end result is, the CROSS_CC_GUEST only has the same definition for both architectures (due to make command's multi-iteration processing and include is processed first). Secondly, CROSS_CC_GUEST needs to be polished because it can be: i) not defined; ii) "cc" without prefix; or iii) used-define value. We can't use it directly. > OK. Since I don't have any better suggestions. Then this is good enough for me. Thanks, drew
diff --git a/tests/migration-test.c b/tests/migration-test.c index 0e687b7..c4d79e9 100644 --- a/tests/migration-test.c +++ b/tests/migration-test.c @@ -83,7 +83,7 @@ static const char *tmpfs; /* A simple PC boot sector that modifies memory (1-100MB) quickly * outputting a 'B' every so often if it's still running. */ -#include "tests/migration/x86-a-b-bootblock.h" +#include "tests/migration/x86_64/x86-a-b-bootblock.h" static void init_bootfile_x86(const char *bootpath) { diff --git a/tests/migration/Makefile b/tests/migration/Makefile index 5d5fa07..1de480e 100644 --- a/tests/migration/Makefile +++ b/tests/migration/Makefile @@ -1,31 +1,34 @@ -# To specify cross compiler prefix, use CROSS_PREFIX= -# > make CROSS_PREFIX=x86_64-linux-gnu- +# +# Copyright (c) 2018 Red Hat, Inc. and/or its affiliates +# +# This work is licensed under the terms of the GNU GPL, version 2 or later. +# See the COPYING file in the top-level directory. +# + +TARGET_LIST = x86_64 + +SRC_PATH = ../.. override define __note -/* This file is automatically generated from - * tests/migration/x86-a-b-bootblock.s, edit that and then run - * tests/migration/rebuild-x86-bootblock.sh to update, - * and then remember to send both in your patch submission. +/* This file is automatically generated from the assembly file in + * tests/migration/$@, edit that and then run "make all" + * inside tests/migration to update, and then remember to send both + * in your patch submission. */ endef export __note -.PHONY: all clean -all: x86-a-b-bootblock.h - -x86-a-b-bootblock.h: x86.bootsect - echo "$$__note" > header.tmp - xxd -i $< | sed -e 's/.*int.*//' >> header.tmp - mv header.tmp $@ +parse-cross-prefix = $(subst gcc,,$(patsubst cc,gcc,$(patsubst CROSS_CC_GUEST="%",%,$(shell grep "CROSS_CC_GUEST=" $(SRC_PATH)/$(1)-softmmu/config-target.mak)))) +gen-cross-prefix = $(patsubst %-,CROSS_PREFIX=%-,$(call parse-cross-prefix,$(1))) -x86.bootsect: x86.boot - dd if=$< of=$@ bs=256 count=2 skip=124 +.PHONY: all $(TARGET_LIST) -x86.boot: x86.o - $(CROSS_PREFIX)objcopy -O binary $< $@ +all: $(TARGET_LIST) -x86.o: x86-a-b-bootblock.S - $(CROSS_PREFIX)gcc -m32 -march=i486 -c $< -o $@ +$(TARGET_LIST): + $(MAKE) -C $@ $(call gen-cross-prefix,$@) clean: - @rm -rf *.boot *.o *.bootsect + for target in $(TARGET_LIST); do \ + $(MAKE) -C $$target clean; \ + done diff --git a/tests/migration/x86_64/Makefile b/tests/migration/x86_64/Makefile new file mode 100644 index 0000000..6dc849f --- /dev/null +++ b/tests/migration/x86_64/Makefile @@ -0,0 +1,22 @@ +# To specify cross compiler prefix, use CROSS_PREFIX= +# > make CROSS_PREFIX=x86_64-linux-gnu- + +.PHONY: all clean +all: x86-a-b-bootblock.h + +x86-a-b-bootblock.h: x86.bootsect + echo "$$__note" > header.tmp + xxd -i $< | sed -e 's/.*int.*//' >> header.tmp + mv header.tmp $@ + +x86.bootsect: x86.boot + dd if=$< of=$@ bs=256 count=2 skip=124 + +x86.boot: x86.o + $(CROSS_PREFIX)objcopy -O binary $< $@ + +x86.o: x86-a-b-bootblock.S + $(CROSS_PREFIX)gcc -m32 -march=i486 -c $< -o $@ + +clean: + @rm -rf *.boot *.o *.bootsect diff --git a/tests/migration/x86-a-b-bootblock.S b/tests/migration/x86_64/x86-a-b-bootblock.S similarity index 100% rename from tests/migration/x86-a-b-bootblock.S rename to tests/migration/x86_64/x86-a-b-bootblock.S diff --git a/tests/migration/x86-a-b-bootblock.h b/tests/migration/x86_64/x86-a-b-bootblock.h similarity index 93% rename from tests/migration/x86-a-b-bootblock.h rename to tests/migration/x86_64/x86-a-b-bootblock.h index 78a151f..73670ef 100644 --- a/tests/migration/x86-a-b-bootblock.h +++ b/tests/migration/x86_64/x86-a-b-bootblock.h @@ -1,7 +1,7 @@ -/* This file is automatically generated from - * tests/migration/x86-a-b-bootblock.s, edit that and then run - * tests/migration/rebuild-x86-bootblock.sh to update, - * and then remember to send both in your patch submission. +/* This file is automatically generated from the assembly file in + * tests/migration/x86_64, edit that and then run "make all" + * inside tests/migration to update, and then remember to send both + * in your patch submission. */ unsigned char x86_bootsect[] = { 0xfa, 0x0f, 0x01, 0x16, 0x74, 0x7c, 0x66, 0xb8, 0x01, 0x00, 0x00, 0x00,
Recently a new configure option, CROSS_CC_GUEST, was added to $(TARGET)-softmmu/config-target.mak to support TCG-related tests. This patch tries to leverage this option to support cross compilation when the migration boot block file is being re-generated: * The x86_64 related files are moved to a new sub-dir (named ./x86_64). * A new top-layer Makefile is created in tests/migration/ directory. This Makefile searches and parses CROSS_CC_GUEST to generate CROSS_PREFIX. The CROSS_PREFIX, if available, is then passed to migration/$ARCH/Makefile. Signed-off-by: Wei Huang <wei@redhat.com> --- tests/migration-test.c | 2 +- tests/migration/Makefile | 43 +++++++++++++----------- tests/migration/x86_64/Makefile | 22 ++++++++++++ tests/migration/{ => x86_64}/x86-a-b-bootblock.S | 0 tests/migration/{ => x86_64}/x86-a-b-bootblock.h | 8 ++--- 5 files changed, 50 insertions(+), 25 deletions(-) create mode 100644 tests/migration/x86_64/Makefile rename tests/migration/{ => x86_64}/x86-a-b-bootblock.S (100%) rename tests/migration/{ => x86_64}/x86-a-b-bootblock.h (93%)