| Message ID | 20180908134648.2582-16-noralf@tronnes.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/cma-helper drivers: Use drm_fbdev_generic_setup() | expand |
On Sat, Sep 08, 2018 at 03:46:43PM +0200, Noralf Trønnes wrote: > The CMA helper is already using the drm_fb_helper_generic_probe part of > the generic fbdev emulation. This patch makes full use of the generic > fbdev emulation by using its drm_client callbacks. This means that > drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are > now handled by the emulation code. Additionally fbdev unregister happens > automatically on drm_dev_unregister(). > > The drm_fbdev_generic_setup() call is put after drm_dev_register() in the > driver. This is done to highlight the fact that fbdev emulation is an > internal client that makes use of the driver, it is not part of the > driver as such. If fbdev setup fails, an error is printed, but the driver > succeeds probing. > > Cc: Maxime Ripard <maxime.ripard@bootlin.com> > Signed-off-by: Noralf Trønnes <noralf@tronnes.org> It's hard to tell anything about this patch without context, but is the mali userspace still broken? Maxime
Den 10.09.2018 09.28, skrev Maxime Ripard: > On Sat, Sep 08, 2018 at 03:46:43PM +0200, Noralf Trønnes wrote: >> The CMA helper is already using the drm_fb_helper_generic_probe part of >> the generic fbdev emulation. This patch makes full use of the generic >> fbdev emulation by using its drm_client callbacks. This means that >> drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are >> now handled by the emulation code. Additionally fbdev unregister happens >> automatically on drm_dev_unregister(). >> >> The drm_fbdev_generic_setup() call is put after drm_dev_register() in the >> driver. This is done to highlight the fact that fbdev emulation is an >> internal client that makes use of the driver, it is not part of the >> driver as such. If fbdev setup fails, an error is printed, but the driver >> succeeds probing. >> >> Cc: Maxime Ripard <maxime.ripard@bootlin.com> >> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> > It's hard to tell anything about this patch without context, but is > the mali userspace still broken? I replied to the cover letter with more context. If that's the smem_start thing, then yes. This patch will block smem_start from being used by any DRM driver: drm/fb: Stop leaking physical address https://patchwork.freedesktop.org/patch/245514/ Noralf.
diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c index 1e41c3f5fd6d..ef773d36baf0 100644 --- a/drivers/gpu/drm/sun4i/sun4i_drv.c +++ b/drivers/gpu/drm/sun4i/sun4i_drv.c @@ -34,7 +34,6 @@ static struct drm_driver sun4i_drv_driver = { .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME | DRIVER_ATOMIC, /* Generic Operations */ - .lastclose = drm_fb_helper_lastclose, .fops = &sun4i_drv_fops, .name = "sun4i-drm", .desc = "Allwinner sun4i Display Engine", @@ -105,12 +104,7 @@ static int sun4i_drv_bind(struct device *dev) /* Remove early framebuffers (ie. simplefb) */ drm_fb_helper_remove_conflicting_framebuffers(NULL, "sun4i-drm-fb", false); - /* Create our framebuffer */ - ret = sun4i_framebuffer_init(drm); - if (ret) { - dev_err(drm->dev, "Couldn't create our framebuffer\n"); - goto cleanup_mode_config; - } + sun4i_framebuffer_init(drm); /* Enable connectors polling */ drm_kms_helper_poll_init(drm); @@ -119,11 +113,12 @@ static int sun4i_drv_bind(struct device *dev) if (ret) goto finish_poll; + drm_fbdev_generic_setup(drm, 32); + return 0; finish_poll: drm_kms_helper_poll_fini(drm); - sun4i_framebuffer_free(drm); cleanup_mode_config: drm_mode_config_cleanup(drm); of_reserved_mem_device_release(dev); @@ -138,7 +133,6 @@ static void sun4i_drv_unbind(struct device *dev) drm_dev_unregister(drm); drm_kms_helper_poll_fini(drm); - sun4i_framebuffer_free(drm); drm_mode_config_cleanup(drm); of_reserved_mem_device_release(dev); drm_dev_put(drm); diff --git a/drivers/gpu/drm/sun4i/sun4i_framebuffer.c b/drivers/gpu/drm/sun4i/sun4i_framebuffer.c index 5f29850ef8ac..cb828028ae06 100644 --- a/drivers/gpu/drm/sun4i/sun4i_framebuffer.c +++ b/drivers/gpu/drm/sun4i/sun4i_framebuffer.c @@ -12,8 +12,6 @@ #include <drm/drm_atomic.h> #include <drm/drm_atomic_helper.h> -#include <drm/drm_fb_helper.h> -#include <drm/drm_fb_cma_helper.h> #include <drm/drm_gem_framebuffer_helper.h> #include <drm/drmP.h> @@ -37,7 +35,6 @@ static int sun4i_de_atomic_check(struct drm_device *dev, } static const struct drm_mode_config_funcs sun4i_de_mode_config_funcs = { - .output_poll_changed = drm_fb_helper_output_poll_changed, .atomic_check = sun4i_de_atomic_check, .atomic_commit = drm_atomic_helper_commit, .fb_create = drm_gem_fb_create, @@ -47,7 +44,7 @@ static struct drm_mode_config_helper_funcs sun4i_de_mode_config_helpers = { .atomic_commit_tail = drm_atomic_helper_commit_tail_rpm, }; -int sun4i_framebuffer_init(struct drm_device *drm) +void sun4i_framebuffer_init(struct drm_device *drm) { drm_mode_config_reset(drm); @@ -56,11 +53,4 @@ int sun4i_framebuffer_init(struct drm_device *drm) drm->mode_config.funcs = &sun4i_de_mode_config_funcs; drm->mode_config.helper_private = &sun4i_de_mode_config_helpers; - - return drm_fb_cma_fbdev_init(drm, 32, 0); -} - -void sun4i_framebuffer_free(struct drm_device *drm) -{ - drm_fb_cma_fbdev_fini(drm); } diff --git a/drivers/gpu/drm/sun4i/sun4i_framebuffer.h b/drivers/gpu/drm/sun4i/sun4i_framebuffer.h index 7ef0aed8384c..6fe5bd8c4026 100644 --- a/drivers/gpu/drm/sun4i/sun4i_framebuffer.h +++ b/drivers/gpu/drm/sun4i/sun4i_framebuffer.h @@ -13,7 +13,6 @@ #ifndef _SUN4I_FRAMEBUFFER_H_ #define _SUN4I_FRAMEBUFFER_H_ -int sun4i_framebuffer_init(struct drm_device *drm); -void sun4i_framebuffer_free(struct drm_device *drm); +void sun4i_framebuffer_init(struct drm_device *drm); #endif /* _SUN4I_FRAMEBUFFER_H_ */
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> --- drivers/gpu/drm/sun4i/sun4i_drv.c | 12 +++--------- drivers/gpu/drm/sun4i/sun4i_framebuffer.c | 12 +----------- drivers/gpu/drm/sun4i/sun4i_framebuffer.h | 3 +-- 3 files changed, 5 insertions(+), 22 deletions(-)